Works by Pramanik, Alokesh

Results: 57

Mechanical Properties of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing.

Published in:

Designs, 2025, v. 9, n. 3, p. 66, doi. 10.3390/designs9030066

By:

Basak, Animesh Kumar;
Sali, Jasim Mohammed;
Pramanik, Alokesh

Publication type:

Article

Experimental studies on viscosity, thermal and tribological properties of vegetable oil (kapok oil) with boric acid as an additive.

Published in:

Micro & Nano Letters (Wiley-Blackwell), 2021, v. 16, n. 5, p. 290, doi. 10.1049/mna2.12045

By:

Shankar, Subramaniam;
Manikandan, M.;
Raja, G.;
Priyadharashini, G. Suganya;
Pramanik, Alokesh

Publication type:

Article

Impact of process parameters on improving the performance of 3D printed recycled polylactic acid (rPLA) components.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3751, doi. 10.1007/s00170-024-13140-7

By:

Hasan, Mohammad Raquibul;
Davies, Ian J.;
Pramanik, Alokesh;
John, Michele;
Biswas, Wahidul K.

Publication type:

Article

Additive Manufacturing in Australian Small to Medium Enterprises: Vat Polymerisation Techniques, Case Study and Pathways to Industry 4.0 Competitiveness.

Published in:

Journal of Manufacturing & Materials Processing, 2023, v. 7, n. 5, p. 168, doi. 10.3390/jmmp7050168

By:

Rooney, Kimberley;
Dong, Yu;
Pramanik, Alokesh;
Basak, Animesh Kumar

Publication type:

Article

A Review on the Recent Trends in Forming Composite Joints Using Spot Welding Variants.

Published in:

Journal of Composites Science, 2024, v. 8, n. 4, p. 155, doi. 10.3390/jcs8040155

By:

Arumugam, Aravinthan;
Pramanik, Alokesh

Publication type:

Article

Machining of Titanium Alloy (Ti-6Al-4V) —Theory to Application.

Published in:

Machining Science & Technology, 2015, v. 19, n. 1, p. 1, doi. 10.1080/10910344.2014.991031

By:

Pramanik, Alokesh;
Littlefair, Guy

Publication type:

Article

Developments in Machining of Stacked Materials Made of CFRP and Titanium/Aluminum Alloys.

Published in:

Machining Science & Technology, 2014, v. 18, n. 4, p. 485, doi. 10.1080/10910344.2014.955718

By:

Pramanik, Alokesh;
Littlefair, Guy

Publication type:

Article

Investigations on tribo-mechanical behaviour of Al-Si10-Mg/sugarcane bagasse ash/SiC hybrid composites.

Published in:

China Foundry, 2019, v. 16, n. 4, p. 277, doi. 10.1007/s41230-019-8176-9

By:

Subramanian, Shankar;
Arunachalam, Balaji;
Nallasivam, Kawin;
Pramanik, Alokesh

Publication type:

Article

Study of effective parameters on wear behavior of rubbers based on statistical methods.

Published in:

Polymers for Advanced Technologies, 2019, v. 30, n. 6, p. 1415, doi. 10.1002/pat.4574

By:

Hakami, Ferial;
Pramanik, Alokesh;
Islam, Nazrul;
Basak, Animesh;
Ridgway, Nigel

Publication type:

Article

Wear behavior of chromium nitride coating in dry condition at lower sliding velocity and load.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 5-8, p. 1665, doi. 10.1007/s00170-017-0796-x

By:

Singh, Shailesh Kumar;
Chattopadhyaya, Somnath;
Pramanik, Alokesh;
Kumar, Sanjeev

Publication type:

Article

Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future.

Published in:

Advances in Materials & Processing Technologies, 2024, v. 10, n. 3, p. 2397, doi. 10.1080/2374068X.2023.2216397

By:

Radhika, N;
Sam, Manu;
Sathishkumar, M;
Kavimani, V;
Pramanik, Alokesh

Publication type:

Article

Tribo-mechanical behaviour of aluminium alloy (AlSi10Mg) reinforced with palmyra shell ash and silicon carbide particles.

Published in:

Metallurgical Research & Technology, 2022, v. 119, n. 3, p. 1, doi. 10.1051/metal/2022038

By:

Subramaniam, Shankar;
Raju, Naveenkumar;
Shanmugam, Elango;
Rajavel, Nithyaprakash;
Pramanik, Alokesh;
Basak, Animesh Kumar;
Prakash, Chander;
Gur, Ali Kaya

Publication type:

Article

Performance of Gears Manufactured Through Additive Manufacturing.

Published in:

Metals (2075-4701), 2025, v. 15, n. 1, p. 63, doi. 10.3390/met15010063

By:

Basak, Animesh Kumar;
Ghasseb, Jack;
Pramanik, Alokesh

Publication type:

Article

Fatigue Behaviour of Mechanical Joints: A Review.

Published in:

2025

By:

Basak, Animesh Kumar;
Bajwa, Dharamvir Singh;
Pramanik, Alokesh

Publication type:

Literature Review

Laser Beam Machining of Titanium Alloy—A Review.

Published in:

Metals (2075-4701), 2023, v. 13, n. 9, p. 1536, doi. 10.3390/met13091536

By:

Pramanik, Alokesh;
Basak, Animesh Kumar

Publication type:

Article

Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy.

Published in:

Metals (2075-4701), 2022, v. 12, n. 2, p. N.PAG, doi. 10.3390/met12020188

By:

Basak, Animesh;
Pramanik, Alokesh;
Prakash, Chander;
Shankar, Subramaniam;
Debnath, Sujan

Publication type:

Article

Study of Respiratory Symptoms and Pulmonary Function among Neem Oil Industry Workers.

Published in:

Indian Journal of Occupational & Environmental Medicine, 2024, v. 28, n. 2, p. 163, doi. 10.4103/ijoem.ijoem_250_23

By:

Subramaniam, Shankar;
Ganesan, Abbas;
Raju, Naveenkumar;
Rajavel, Nithyaprakash;
Chenniappan, Maheswari;
Mohanty, Rakesh Mohanty Surendra;
Angamuthu, Sabarinathan;
Sivakumar, Karthick;
Prakash, Chander;
Pramanik, Alokesh;
Basak, Animesh Kumar

Publication type:

Article

Mechanical and Shape Memory Properties of Additively Manufactured Polyurethane (PU)/Halloysite Nanotube (HNT) Nanocomposites.

Published in:

Nanomaterials (2079-4991), 2024, v. 14, n. 16, p. 1373, doi. 10.3390/nano14161373

By:

Nugroho, Wendy Triadji;
Dong, Yu;
Pramanik, Alokesh

Publication type:

Article

Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites.

Published in:

Nanomaterials (2079-4991), 2023, v. 13, n. 13, p. 1975, doi. 10.3390/nano13131975

By:

Nugroho, Wendy Triadji;
Dong, Yu;
Pramanik, Alokesh;
Zhang, Zhixiao;
Ramakrishna, Seeram

Publication type:

Article

Cryo treatment and corrosion studies of nickel-titanium shape-memory alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 3, p. 1079, doi. 10.1177/09544089231159250

By:

Vishwanatha, HM;
Saxena, Kuldeep K;
Pramanik, Alokesh;
Behera, Ajit

Publication type:

Article

MODELING AND SIMULATION OF MAGNETRON-SPUTTERRED NiTi THIN FILM DEPOSITION BY SRIM/TRIM.

Published in:

Surface Review & Letters, 2025, v. 32, n. 6, p. 1, doi. 10.1142/S0218625X2340005X

By:

BEHERA, AJIT;
SAXENA, KULDEEP;
PRAKASH, CHANDER;
PRAMANIK, ALOKESH;
HAIDER, JULFIKAR;
BASAK, ANIMESH;
SHANKAR, S.

Publication type:

Article

EFFECT OF LOADS AND BIO-LUBRICANTS ON TRIBOLOGICAL STUDY OF ZIRCONIA AND ZIRCONIA TOUGHENED ALUMINA AGAINST Ti6Al4V FOR HIP PROSTHESIS.

Published in:

Surface Review & Letters, 2023, v. 30, n. 1, p. 1, doi. 10.1142/S0218625X21410067

By:

SHANKAR, S.;
NITHYAPRAKASH, R.;
NAVEEN KUMAR, R.;
ARAVINTHAN, R.;
PRAMANIK, ALOKESH;
KUMAR BASAK, ANIMESH

Publication type:

Article

ULTRA-PRECISION DIAMOND PROCESSING OF BIODEGRADABLE AZ31 ALLOY FOR ORTHOPEDIC APPLICATION.

Published in:

Surface Review & Letters, 2022, v. 29, n. 9, p. 1, doi. 10.1142/S0218625X22501165

By:

PRAKASH, CHANDER;
SINGH, SUNPREET;
MISHRA, VINOD;
SHARMA, ROHIT;
PRASAD, K. K.;
KARAR, VINOD;
PRAMANIK, ALOKESH;
SHANKAR, S.;
BUDDHI, DHARAM

Publication type:

Article

Microstructural, electrochemical, and hot corrosion analysis of CoCrFeCuTi high entropy alloy reinforced titanium matrix composites synthesized by microwave sintering.

Published in:

International Journal of Lightweight Materials & Manufacture, 2025, v. 8, n. 1, p. 141, doi. 10.1016/j.ijlmm.2024.07.004

By:

Ragunath, S.;
Radhika, N.;
Krishna, S. Aravind;
Pramanik, Alokesh

Publication type:

Article

Effect of graphene on the tribological behavior of Ti6Al6V2Sn/Gn composite produced via microwave sintering.

Published in:

International Journal of Lightweight Materials & Manufacture, 2024, v. 7, n. 1, p. 1, doi. 10.1016/j.ijlmm.2023.10.001

By:

Akhil, U. V.;
Radhika, N.;
Ramkumar, T.;
Pramanik, Alokesh

Publication type:

Article

Finite element submodeling technique to analyze the contact pressure and wear of hard bearing couples in hip prosthesis.

Published in:

Computer Methods in Biomechanics & Biomedical Engineering, 2020, v. 23, n. 8, p. 422, doi. 10.1080/10255842.2020.1734794

By:

Shankar, S.;
Nithyaprakash, R.;
Santhosh, B. R;
Uddin, M. S.;
Pramanik, Alokesh

Publication type:

Article

Effects of Abrasive Waterjet Machining on the Quality of the Surface Generated on a Carbon Fibre Reinforced Polymer Composite.

Published in:

Machines, 2023, v. 11, n. 7, p. 749, doi. 10.3390/machines11070749

By:

Rowe, Andrew;
Pramanik, Alokesh;
Basak, Animesh Kumar;
Prakash, Chander;
Subramaniam, Shankar;
Dixit, Amit Rai;
Radhika, N.

Publication type:

Article

Use of palm olein as cutting fluid during turning of mild steel.

Published in:

Australian Journal of Mechanical Engineering, 2023, v. 21, n. 1, p. 192, doi. 10.1080/14484846.2020.1842156

By:

Debnath, S.;
Anwar, M.;
Basak, A. K.;
Pramanik, Alokesh

Publication type:

Article

A study of spot weld pull-out failure (PF) mechanism under different loading conditions for stainless steel and mild steel joints.

Published in:

Australian Journal of Mechanical Engineering, 2022, v. 20, n. 3, p. 603, doi. 10.1080/14484846.2020.1725348

By:

Arumugam, Aravinthan;
Pramanik, Alokesh

Publication type:

Article

Recent Issues in Materials and Manufacturing.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2017, v. 9, n. 12, p. 1, doi. 10.1177/1687814017743107

By:

Ravichandran, M.;
Anandakrishnan, V.;
Duraiselvam, Ing. M.;
Pramanik, Alokesh

Publication type:

Article

Surface Topography Analysis of Mg-Based Composites with Different Nanoparticle Contents Disintegrated Using Abrasive Water Jet.

Published in:

Materials (1996-1944), 2021, v. 14, n. 19, p. 5471, doi. 10.3390/ma14195471

By:

Mardi, Kumari Bimla;
Dixit, Amit Rai;
Pramanik, Alokesh;
Hvizdos, Pavol;
Mallick, Ashis;
Nag, Akash;
Hloch, Sergej

Publication type:

Article

Workability and Flexural Properties of Fibre-Reinforced Geopolymer Using Different Mono and Hybrid Fibres.

Published in:

Materials (1996-1944), 2021, v. 14, n. 16, p. 4447, doi. 10.3390/ma14164447

By:

Junior, Jacob;
Saha, Ashish Kumer;
Sarker, Prabir Kumar;
Pramanik, Alokesh

Publication type:

Article

Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers.

Published in:

Materials (1996-1944), 2021, v. 14, n. 7, p. 1699, doi. 10.3390/ma14071699

By:

Prakash, Chander;
Pramanik, Alokesh;
Basak, Animesh K.;
Dong, Yu;
Debnath, Sujan;
Shankar, Subramaniam;
Singh, Sunpreet;
Wu, Linda Yongling;
Zheng, Hongyu Y.;
La Rosa, Angela D.

Publication type:

Article

Tribological Properties of Chromium Nitride on the Cylinder Liner under the Influence of High Temperature.

Published in:

Materials (1996-1944), 2020, v. 13, n. 20, p. 4497, doi. 10.3390/ma13204497

By:

Singh, Shailesh Kumar;
Chattopadhyaya, Somnath;
Pramanik, Alokesh;
Kumar, Sanjeev;
Basak, Animesh K.;
Pandey, Shailesh M.;
Murtaza, Qasim;
Legutko, Stanislaw;
Litak, Grzegorz

Publication type:

Article

Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode.

Published in:

Materials (1996-1944), 2019, v. 12, n. 7, p. 1006, doi. 10.3390/ma12071006

By:

Prakash, Chander;
Singh, Sunpreet;
Pruncu, Catalin Iulian;
Mishra, Vinod;
Królczyk, Grzegorz;
Pimenov, Danil Yurievich;
Pramanik, Alokesh

Publication type:

Article

Evaluating Hole Quality in Drilling of Al 6061 Alloys.

Published in:

Materials (1996-1944), 2018, v. 11, n. 12, p. 2443, doi. 10.3390/ma11122443

By:

Uddin, Mohammad;
Basak, Animesh;
Pramanik, Alokesh;
Singh, Sunpreet;
Krolczyk, Grzegorz M.;
Prakash, Chander

Publication type:

Article

Recycling Post-Consumed Polylactic Acid Waste Through Three-Dimensional Printing: Technical vs. Resource Efficiency Benefits.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 6, p. 2484, doi. 10.3390/su17062484

By:

Hasan, Mohammad Raquibul;
Davies, Ian J.;
Pramanik, Alokesh;
John, Michele;
Biswas, Wahidul K.

Publication type:

Article

Development of GGBS-Based Geopolymer Concrete Incorporated with Polypropylene Fibers as Sustainable Materials.

Published in:

Sustainability (2071-1050), 2022, v. 14, n. 17, p. 10639, doi. 10.3390/su141710639

By:

Thakur, Gaurav;
Singh, Yatendra;
Singh, Rajesh;
Prakash, Chander;
Saxena, Kuldeep K.;
Pramanik, Alokesh;
Basak, Animesh;
Subramaniam, Shankar

Publication type:

Article

Artificial Intelligence Technologies for Forecasting Air Pollution and Human Health: A Narrative Review.

Published in:

Sustainability (2071-1050), 2022, v. 14, n. 16, p. 9951, doi. 10.3390/su14169951

By:

Subramaniam, Shankar;
Raju, Naveenkumar;
Ganesan, Abbas;
Rajavel, Nithyaprakash;
Chenniappan, Maheswari;
Prakash, Chander;
Pramanik, Alokesh;
Basak, Animesh Kumar;
Dixit, Saurav

Publication type:

Article

Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response.

Published in:

Sustainability (2071-1050), 2021, v. 13, n. 10, p. 5617, doi. 10.3390/su13105617

By:

Kumar, Raman;
Singh, Sehijpal;
Sidhu, Ardamanbir Singh;
Pruncu, Catalin I.;
Davim, Joao Paulo;
Prakash, Chander;
Singh, Sunpreet;
Ramakrishna, Seeram;
Pramanik, Alokesh;
Zheng, Hongyu;
Wu, Yongling

Publication type:

Article

An Analysis of Machining Response Parameters, Crystalline Structures, and Surface Topography During EDM of Die-Steel Using EDM Oil and Liquid-Based Viscous Dielectrics: A Comparative Analysis of Machining Performance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2023, v. 48, n. 9, p. 11941, doi. 10.1007/s13369-023-07626-x

By:

Paswan, Kamlesh;
Pramanik, Alokesh;
Chattopadhyaya, Somnath;
Sharma, Shubham;
Singh, Gurminder;
Khan, Aqib Mashood;
Singh, Sunpreet

Publication type:

Article

Real-Time Comprehensive Energy Analysis of the LHD 811MK-V Machine with Mathematical Model Validation and Empirical Study of Overheating: An Experimental Approach.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2022, v. 47, n. 7, p. 9043, doi. 10.1007/s13369-021-06439-0

By:

Siddiqui, Mohd. Ahtesham Hussain;
Chattopadhyaya, Somnath;
Sharma, Shubham;
Assad, Mamdouh El Haj;
Li, Changhe;
Pramanik, Alokesh;
Kilinc, Huseyin Cagan

Publication type:

Article

Investigation of Noise Induced Hearing Loss Among Power Loom Industry Workers in Tamil Nadu, India.

Published in:

Indian Journal of Otolaryngology & Head & Neck Surgery, 2024, v. 76, n. 6, p. 5531, doi. 10.1007/s12070-024-05025-8

By:

Subramaniam, Shankar;
Ganesan, Abbas;
Raju, Naveenkumar;
Rajavel, Nithyaprakash;
Chenniappan, Maheswari;
Prakash, Chander;
Pramanik, Alokesh;
Basak, Animesh Kumar

Publication type:

Article

Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid.

Published in:

Mechanics & Industry, 2020, v. 21, n. 5, p. 1, doi. 10.1051/meca/2020066

By:

Shankar, Subramaniam;
Manikandan, Murugasamy;
Raja, Gunasekaran;
Pramanik, Alokesh

Publication type:

Article

Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining.

Published in:

Materials (1996-1944), 2023, v. 16, n. 3, p. 930, doi. 10.3390/ma16030930

By:

Alkahlan, Bandar;
Tabbakh, Thamer;
Kurdi, Abdulaziz;
Pramanik, Alokesh;
Basak, Animesh K.

Publication type:

Article

Review of Experimental and Finite Element Analyses of Spot Weld Failures in Automotive Metal Joints.

Published in:

Jordan Journal of Mechanical & Industrial Engineering, 2023, v. 17, n. 3, p. 315

By:

Arumugam, Aravinthan;
Pramanik, Alokesh

Publication type:

Article

Review of Experimental and Finite Element Analyses of Spot Weld Failures in Automotive Metal Joints.

Published in:

Jordan Journal of Mechanical & Industrial Engineering, 2020, v. 14, n. 3, p. 315

By:

Arumugam, Aravinthan;
Pramanik, Alokesh

Publication type:

Article

Surface integrity of Mg-based nanocomposite produced by Abrasive Water Jet Machining (AWJM).

Published in:

Materials & Manufacturing Processes, 2017, v. 32, n. 15, p. 1707, doi. 10.1080/10426914.2017.1279306

By:

Mardi, K. Bimla;
Dixit, A. R.;
Mallick, A.;
Pramanik, Alokesh;
Ballokova, Beata;
Hvizdos, Pavol;
Foldyna, Josef;
Scucka, Jiri;
Hlavacek, Petr;
Zelenak, Michal

Publication type:

Article

Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone.

Published in:

Polymers (20734360), 2021, v. 13, n. 19, p. 3260, doi. 10.3390/polym13193260

By:

Jha, Kanishka;
Tyagi, Yogesh K.;
Kumar, Rajeev;
Sharma, Shubham;
Huzaifah, Muhammad Roslim Muhammad;
Li, Changhe;
Ilyas, Rushdan Ahmad;
Dwivedi, Shashi Prakash;
Saxena, Ambuj;
Pramanik, Alokesh

Publication type:

Article

Effect of peak current and peak voltage on machined surface morphology during WEDM of TiNiCu shape memory alloys.

Published in:

Journal of Mechanical Science & Technology, 2020, v. 34, n. 10, p. 3957, doi. 10.1007/s12206-020-2205-x

By:

Roy, Abhinaba;
Narendranath, S.;
Pramanik, Alokesh

Publication type:

Article