Works by Pervaiz, Salman

Results: 50

State-of-the-art review on fused deposition modeling (FDM) for 3D printing of polymer blends and composites: innovations, challenges, and applications.

Published in:

2024

By:

Ali, Shafahat;
Deiab, Ibrahim;
Pervaiz, Salman

Publication type:

Literature Review

Machinability analysis of AZ31 magnesium alloys using the Taguchi gray relational analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 9/10, p. 4171, doi. 10.1007/s00170-023-11354-9

By:

Ali, Shafahat;
Pervaiz, Salman

Publication type:

Article

Machinability analysis of dry and liquid nitrogen–based cryogenic cutting of Inconel 718: experimental and FE analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 11/12, p. 3801, doi. 10.1007/s00170-021-08173-1

By:

Pervaiz, Salman;
Kannan, Sathish;
Anwar, Saqib;
Huo, Dehong

Publication type:

Article

LBM of aluminum alloy: towards a control of material removal and roughness.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 5/6, p. 1901, doi. 10.1007/s00170-019-04365-y

By:

Ahmed, Naveed;
Pervaiz, Salman;
Ahmad, Shafiq;
Rafaqat, Madiha;
Hassan, Adeel;
Zaindin, Mazen

Publication type:

Article

Exploring the contribution of unconventional parameters on spark gap formation and its minimization during WEDM of layered composite.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 102, n. 5-8, p. 1659, doi. 10.1007/s00170-019-03301-4

By:

Ishfaq, Kashif;
Ahmed, Naveed;
Mufti, Nadeem Ahmad;
Pervaiz, Salman

Publication type:

Article

Electron beam melting of gamma titanium aluminide and investigating the effect of EBM layer orientation on milling performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 9-12, p. 3093, doi. 10.1007/s00170-018-1802-7

By:

Anwar, Saqib;
Ahmed, Naveed;
Abdo, Basem M.;
Pervaiz, Salman;
Chowdhury, M. A. K.;
Alahmari, Abdulrahman M.

Publication type:

Article

A numerical and experimental study to investigate convective heat transfer and associated cutting temperature distribution in single point turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 94, n. 1-4, p. 897, doi. 10.1007/s00170-017-0975-9

By:

Pervaiz, Salman;
Deiab, Ibrahim;
Wahba, Essam;
Rashid, Amir;
Nicolescu, Mihai

Publication type:

Article

Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 5, p. 2486, doi. 10.1177/09544089231163120

By:

Alshibi, Assem;
Nasreldin, Abdelrahman;
Pervaiz, Salman

Publication type:

Article

Development of sustainable polymer composite with agro‐industrial residue for biomedical applications.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1922, doi. 10.1002/pen.27123

By:

Ali, Shafahat;
Deiab, Ibrahim;
Pervaiz, Salman;
Eltaggaz, Abdelkrem

Publication type:

Article

Mechanical Performance of Light Weight 3D Printed Interlocked Assemblies.

Published in:

International Journal on Advanced Science, Engineering & Information Technology, 2023, v. 13, n. 1, p. 329, doi. 10.18517/ijaseit.13.1.17802

By:

Hannan, Syed Yasir;
Pervaiz, Salman

Publication type:

Article

Electron beam melting of titanium alloy and surface finish improvement through rotary ultrasonic machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 9-12, p. 3349, doi. 10.1007/s00170-017-0365-3

By:

Ahmed, Naveed;
Abdo, Basem;
Darwish, Saied;
Moiduddin, Khawaja;
Pervaiz, Salman;
Alahmari, Abdulrahman;
Naveed, Madiha

Publication type:

Article

Potential of alternative lubrication strategies for metal cutting processes: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 89, n. 5-8, p. 2447, doi. 10.1007/s00170-016-9298-5

By:

Sharif, Muhammed;
Pervaiz, Salman;
Deiab, Ibrahim

Publication type:

Article

An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V).

Published in:

International Journal of Advanced Manufacturing Technology, 2016, v. 87, n. 5-8, p. 1371, doi. 10.1007/s00170-016-8969-6

By:

Pervaiz, Salman;
Rashid, Amir;
Deiab, Ibrahim;
Nicolescu, Cornel

Publication type:

Article

A novel numerical modeling approach to determine the temperature distribution in the cutting tool using conjugate heat transfer (CHT) analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 80, n. 5-8, p. 1039, doi. 10.1007/s00170-015-7086-2

By:

Pervaiz, Salman;
Deiab, Ibrahim;
Wahba, Essam;
Rashid, Amir;
Nicolescu, Cornel

Publication type:

Article

Optimization of Environment-Friendly and Sustainable Polylactic Acid (PLA)-Constructed Triply Periodic Minimal Surface (TPMS)-Based Gyroid Structures.

Published in:

Polymers (20734360), 2024, v. 16, n. 8, p. 1175, doi. 10.3390/polym16081175

By:

Razi, Syed Saarim;
Pervaiz, Salman;
Susantyoko, Rahmat Agung;
Alyammahi, Mozah

Publication type:

Article

Wheat Pill Poisoning: Management and outcome in cases reported in DG Khan District.

Published in:

Professional Medical Journal, 2021, v. 28, n. 8, p. 1096, doi. 10.29309/TPMJ/2021.28.08.4791

By:

Khan, Alina Nawaz;
Khan, Rabia;
Siddiqui, Naheed;
Rana, Salman Pervaiz;
Faqirullah;
Masood, Riffat

Publication type:

Article

Assessment of Medical Students knowledge and perception about Importance of Forensic Medicine in crime investigation.

Published in:

Professional Medical Journal, 2021, v. 28, n. 1, p. 101, doi. 10.29309/TPMJ/2021.28.01.4763

By:

Ansari, Rizwan Zafar;
Aamir, Yasmin;
Malik, Beenish;
Rana, Salman Pervaiz;
Butt, Usman Shahid;
Farid, Noreen

Publication type:

Article

Elsberg syndrome - A systematic review of existing scientific literature from 2000 - 2023.

Published in:

Pakistan Journal of Medical Sciences, 2024, v. 40, p. S103, doi. 10.12669/pjms.40.12(PINS).11105

By:

Qadri, Haseeb Mehmood;
Pervaiz, Salman;
Ijaz, Momin;
Fatir, Chaudhary Abdul;
Anwar, Muhammad Usama;
Babar, Muhammad Saad;
Bashir, Asif

Publication type:

Article

Endocrine and metabolic alterations in response to systemic inflammation and sepsis: a review article.

Published in:

2025

By:

Mehdi, Syed Faizan;
Qureshi, Muhammad Hamza;
Pervaiz, Salman;
Kumari, Karishma;
Saji, Edwin;
Shah, Mahnoor;
Abdullah, Ahmad;
Zahoor, Kamran;
Qadeer, Hafiza Amna;
Katari, Disha Kumari;
Metz, Christine;
Mishra, Lopa;
LeRoith, Derek;
Tracey, Kevin;
Brownstein, Michael J.;
Roth, Jesse

Publication type:

Literature Review

Effect of layer height, print speed and cell geometry on mechanical properties of marble PLA based 3D printed parts.

Published in:

Smart Materials in Manufacturing, 2023, v. 1, p. 1, doi. 10.1016/j.smmf.2023.100023

By:

Almansoori, Khalifa;
Pervaiz, Salman

Publication type:

Article

Chip morphology and tool wear investigation in high-speed machining of AZ61 magnesium alloys using vegetable-oil based cutting fluid.

Published in:

Advances in Materials & Processing Technologies, 2024, v. 10, n. 4, p. 3430, doi. 10.1080/2374068X.2023.2242686

By:

Alshibi, Assem;
Nasreldin, Abdelrahman;
Pervaiz, Salman

Publication type:

Article

Enhancing lung transplantation with ECMO: a comprehensive review of mechanisms, outcomes, and future considerations.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 4, p. 191, doi. 10.1051/ject/2024023

By:

Pervaiz Butt, Salman;
Kakar, Vivek;
Abdulaziz, Salman;
Razzaq, Nabeel;
Saleem, Yasir;
Kumar, Arun;
Ashiq, Fazil;
Ghisulal, Praveen;
Thrush, Aaron;
Malik, Sadaf;
Griffin, Mairead;
Amir, Mahanoor;
Khan, Umar;
Salim, Ashal;
Zoumot, Zaid;
Mydin, Izanee;
Aljabery, Yazan;
Bhatnagar, Gopal;
Bayrak, Yusuf;
Obeso, Andres

Publication type:

Article

Heparin resistance management during cardiac surgery: a literature review and future directions.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 3, p. 136, doi. 10.1051/ject/2024015

By:

Butt, Salman Pervaiz;
Kakar, Vivek;
Kumar, Arun;
Razzaq, Nabeel;
Saleem, Yasir;
Ali, Babar;
Raposo, Nuno;
Ashiq, Fazil;
Ghori, Arshad;
Anderson, Philip;
Srivatav, Nilesh;
Aljabery, Yazan;
Abdulaziz, Salman;
Darr, Umer;
Bhatnagar, Gopal

Publication type:

Article

Comparison of routine del Nido cardioplegia vs two types of modified del Nido cardioplegias for myocardial protection among patients undergoing coronary artery bypass grafting (CABG) surgeries: A randomized double-blind clinical trial.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 3, p. 84, doi. 10.1051/ject/2024011

By:

Ali, Babar;
Butt, Salman Pervaiz;
Nour, Mohammad Ghazi;
Khosravi, Mohammad Bagher;
Asmarian, Naeimehossadat;
Shoul, Ali Raza;
Kumar, Arun;
Darr, Umer;
Bhatnagar, Gopal

Publication type:

Article

Venovenous bypass in liver transplantation: Exploring the benefits, efficacy, and safety.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 2, p. 77, doi. 10.1051/ject/2024005

By:

Butt, Salman Pervaiz;
Kumar, Arun;
Ashiq, Fazil;
Minou, Andrei;
Iuppa, Giuseppe;
Quintini, Cristiano

Publication type:

Article

Advocating for an open communication culture in perfusion and cardiothoracic community: a call to action.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 1, p. 30, doi. 10.1051/ject/2023041

By:

Butt, Salman Pervaiz;
Saleem, Yasir;
Cook, Bill

Publication type:

Article

Improving ECMO therapy: Monitoring oxygenator functionality and identifying key indicators, factors, and considerations for changeout.

Published in:

Journal of Extra-Corporeal Technology, 2024, v. 56, n. 1, p. 20, doi. 10.1051/ject/2023047

By:

Butt, Salman Pervaiz;
Razzaq, Nabeel;
Saleem, Yasir;
Cook, Bill;
Abdulaziz, Salman

Publication type:

Article

A multipurpose Extracorporeal Life Support Circuit: a concept for multiorgan transplant and circulatory support service Healthcare provider.

Published in:

Journal of Extra-Corporeal Technology, 2023, v. 55, n. 4, p. 218, doi. 10.1051/ject/2023038

By:

Butt, Salman Pervaiz;
Raposo, Nuno;
Saleem, Yasir

Publication type:

Article

The need for a structured pathway to facilitate perfusionist mobility across borders.

Published in:

Journal of Extra-Corporeal Technology, 2023, v. 55, n. 3, p. 155, doi. 10.1051/ject/2023030

By:

Pervaiz Butt, Salman

Publication type:

Article

A Numerical Simulation of Machining 6061 Syntactic Foams Reinforced with Hollow Al 2 O 3 Shells.

Published in:

Metals (2075-4701), 2022, v. 12, n. 4, p. N.PAG, doi. 10.3390/met12040596

By:

Thomas, Kevin;
Kannan, Sathish;
Nazzal, Mohammad;
Pervaiz, Salman;
Karthikeyan, Ramanujam

Publication type:

Article

Comprehensive analysis of the compressive behavior of Fischer-Koch-S, F-RD, and neovius TPMS cellular structures in 3D-printed PLA specimens.

Published in:

Journal of Elastomers & Plastics, 2025, v. 57, n. 3, p. 315, doi. 10.1177/00952443251314797

By:

Abdulazizov, Mukhammadaziz;
Pervaiz, Salman

Publication type:

Article

Advanced Machine Learning Approaches for Predicting Machining Performance in Orthogonal Cutting Process.

Published in:

Lubricants (2075-4442), 2025, v. 13, n. 2, p. 83, doi. 10.3390/lubricants13020083

By:

Al Bukhari, Sabrina;
Pervaiz, Salman

Publication type:

Article

Sustainable Vegetable Oil-Based Minimum Quantity Lubrication Assisted Machining of AZ91 Magnesium Alloy: A Grey Relational Analysis-Based Study.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 2, p. 79, doi. 10.3390/lubricants11020079

By:

Alshibi, Assem;
Nasreldin, Abdelrahman;
Pervaiz, Salman

Publication type:

Article

Implementation of Sustainable Vegetable-Oil-Based Minimum Quantity Cooling Lubrication (MQCL) Machining of Titanium Alloy with Coated Tools.

Published in:

Lubricants (2075-4442), 2022, v. 10, n. 10, p. 235, doi. 10.3390/lubricants10100235

By:

Pervaiz, Salman;
Ahmad, Naveed;
Ishfaq, Kashif;
Khan, Sarmad;
Deiab, Ibrahim;
Kannan, Sathish

Publication type:

Article

Toxicity Analysis of Nano-Minimum Quantity Lubrication Machining—A Review.

Published in:

Lubricants (2075-4442), 2022, v. 10, n. 8, p. 176, doi. 10.3390/lubricants10080176

By:

Nouzil, Ibrahim;
Eltaggaz, Abdelkrem;
Pervaiz, Salman;
Deiab, Ibrahim

Publication type:

Article

Sustainable Machining of Mg-9Al-1.4Zn Foam Used for Temporary Biomedical Implant Using Cryogenic Cooling.

Published in:

Materials (1996-1944), 2022, v. 15, n. 19, p. 6678, doi. 10.3390/ma15196678

By:

Mohammed, Abdalla;
Kannan, Sathish;
Pervaiz, Salman;
Ali, Shafahat;
Thomas, Kevin K.;
Karthikeyan, Ramanujam

Publication type:

Article

A Hybrid Finite Element—Machine Learning Backward Training Approach to Analyze the Optimal Machining Conditions.

Published in:

Materials (1996-1944), 2021, v. 14, n. 21, p. 6717, doi. 10.3390/ma14216717

By:

George, Kriz;
Kannan, Sathish;
Raza, Ali;
Pervaiz, Salman

Publication type:

Article

Drilling Force Characterization during Inconel 718 Drilling: A Comparative Study between Numerical and Analytical Approaches.

Published in:

Materials (1996-1944), 2021, v. 14, n. 17, p. 4820, doi. 10.3390/ma14174820

By:

Pervaiz, Salman;
Samad, Wael A.

Publication type:

Article

3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review.

Published in:

Materials (1996-1944), 2021, v. 14, n. 16, p. 4520, doi. 10.3390/ma14164520

By:

Pervaiz, Salman;
Qureshi, Taimur Ali;
Kashwani, Ghanim;
Kannan, Sathish

Publication type:

Article

Cryogenic Drilling of AZ31 Magnesium Syntactic Foams.

Published in:

Materials (1996-1944), 2020, v. 13, n. 18, p. 4094, doi. 10.3390/ma13184094

By:

Kannan, Sathish;
Pervaiz, Salman;
Jahan, Muhammad Pervej;
Venkatraghaven, DoraiSwamy

Publication type:

Article

Optimization of Cutting Process Parameters in Inclined Drilling of Inconel 718 Using Finite Element Method and Taguchi Analysis.

Published in:

Materials (1996-1944), 2020, v. 13, n. 18, p. 3995, doi. 10.3390/ma13183995

By:

Pervaiz, Salman;
Kannan, Sathish;
Subramaniam, Abhishek

Publication type:

Article

On the Role of Hollow Aluminium Oxide Microballoons during Machining of AZ31 Magnesium Syntactic Foam.

Published in:

Materials (1996-1944), 2020, v. 13, n. 16, p. 3534, doi. 10.3390/ma13163534

By:

Kannan, Sathish;
Pervaiz, Salman;
Alhourani, Abdulla;
Klassen, Robert J.;
Selvam, Rajiv;
Haghshenas, Meysam

Publication type:

Article

Surface morphology of inclined CFRP holes when machined under cryogenic environment.

Published in:

Materials & Manufacturing Processes, 2020, v. 35, n. 11, p. 1228, doi. 10.1080/10426914.2020.1762208

By:

Kannan, Sathish;
Pervaiz, Salman

Publication type:

Article

Controlling the material removal and roughness of Inconel 718 in laser machining.

Published in:

Materials & Manufacturing Processes, 2019, v. 34, n. 10, p. 1169, doi. 10.1080/10426914.2019.1615082

By:

Ahmed, Naveed;
Rafaqat, Madiha;
Pervaiz, Salman;
Umer, Usama;
Alkhalefa, Hesham;
Shar, Muhammad Ali;
Mian, Syed Hammad

Publication type:

Article

EDM of Ti-6Al-4V: Electrode and polarity selection for minimum tool wear rate and overcut.

Published in:

Materials & Manufacturing Processes, 2019, v. 34, n. 7, p. 769, doi. 10.1080/10426914.2019.1594278

By:

Ahmed, Naveed;
Ishfaq, Kashif;
Rafaqat, Madiha;
Pervaiz, Salman;
Anwar, Saqib;
Salah, Bashir

Publication type:

Article

Abrasive waterjet cutting of cladded material: kerf taper and MRR analysis.

Published in:

Materials & Manufacturing Processes, 2019, v. 34, n. 5, p. 544, doi. 10.1080/10426914.2018.1544710

By:

Ishfaq, Kashif;
Ahmad Mufti, Nadeem;
Ahmed, Naveed;
Pervaiz, Salman

Publication type:

Article

Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review.

Published in:

Materials & Manufacturing Processes, 2014, v. 29, n. 3, p. 219, doi. 10.1080/10426914.2014.880460

By:

Pervaiz, Salman;
Rashid, Amir;
Deiab, Ibrahim;
Nicolescu, Mihai

Publication type:

Article

Performance optimization of 3D printed polyamide 12 via Multi Jet Fusion: A Taguchi grey relational analysis (TGRA).

Published in:

International Journal of Lightweight Materials & Manufacture, 2023, v. 6, n. 1, p. 72, doi. 10.1016/j.ijlmm.2022.05.004

By:

Abdallah, Said;
Ali, Shafahat;
Pervaiz, Salman

Publication type:

Article

Computational Analysis of Machining Induced Stress Distribution during Dry and Cryogenic Orthogonal Cutting of 7075 Aluminium Closed Cell Syntactic Foams.

Published in:

Micromachines, 2023, v. 14, n. 1, p. 174, doi. 10.3390/mi14010174

By:

Thomas, Kevin K.;
Kannan, Sathish;
Pervaiz, Salman;
Nazzal, Mohammad;
Karthikeyan, Ramanujam

Publication type:

Article

Predicting Cutting Force and Primary Shear Behavior in Micro-Textured Tools Assisted Machining of AISI 630: Numerical Modeling and Taguchi Analysis.

Published in:

Micromachines, 2022, v. 13, n. 1, p. 91, doi. 10.3390/mi13010091

By:

Ali, Shafahat;
Abdallah, Said;
Pervaiz, Salman

Publication type:

Article