Works by PAGAC, MAREK

Results: 51

REVOLUTIONIZING 3D PRINTING THROUGH MACHINE LEARNING: POTENTIAL AND CHALLENGES IN BIOPRINTING.

Published in:

MM Science Journal, 2025, p. 8436, doi. 10.17973/MMSJ.2025_06_2025055

By:

HOANG-SY NGUYEN;
HO DAC HUNG;
QUOC-PHU MA;
MESICEK, JAKUB;
HAJNYS, JIRI;
PAGAC, MAREK;
PETRU, JANA

Publication type:

Article

Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3933, doi. 10.1007/s00170-025-15387-0

By:

Šebek, František;
Kubík, Petr;
Zapletal, Josef;
Kunčická, Lenka;
Kocich, Radim;
Pagáč, Marek;
Paška, Zbyněk;
Fojtík, František;
Halama, Radim

Publication type:

Article

Effect of Topology Parameters on Physical–Mechanical Properties of Magnetic PLA 3D-Printed Structures.

Published in:

Magnetochemistry, 2023, v. 9, n. 12, p. 232, doi. 10.3390/magnetochemistry9120232

By:

Zárybnická, Lucie;
Pagáč, Marek;
Ševčík, Radek;
Pokorný, Jaroslav;
Marek, Martin

Publication type:

Article

Experimental and Numerical Study of Behavior of Additively Manufactured 316L Steel Under Challenging Conditions.

Published in:

Metals (2075-4701), 2025, v. 15, n. 2, p. 169, doi. 10.3390/met15020169

By:

Kunčická, Lenka;
Kocich, Radim;
Pagáč, Marek

Publication type:

Article

CLAMPING TOOLS PRINTED FROM ONYX AND USED IN INDUSTRIAL MANUFACTURING PROCESS.

Published in:

MM Science Journal, 2024, p. 7597, doi. 10.17973/MMSJ.2024_11_2024084

By:

Prusa, Michal;
Nemecek, Petr;
Hajnys, Jiri;
Mesicek, Jakub;
Trefil, Antonin;
Pagac, Marek;
Petru, Jana;
Cep, Robert

Publication type:

Article

RESEARCH ABOUT M300 MARAGING STEEL METALLIC POWDER FOR USE IN SLM 3D PRINTING.

Published in:

MM Science Journal, 2024, p. 7569, doi. 10.17973/MMSJ.2024_10_2024080

By:

MECHALI, ABDESSELAM;
SADILEK, MAREK;
MRKVICA, IVAN;
HLINKA, JOSEF;
JAHAN, IBRAHIM;
PAGAC, MAREK;
GAUTAM, PREETI;
MESICK, JAKUB;
HAJNYS, JIRI;
PETRU, JANA

Publication type:

Article

EXPERIMENTAL VERIFICATION OF PROCESS PARAMETERS INFLUENCING THE MECHANICAL PROPERTIES OF M300 IN THE SLM PROCESS.

Published in:

MM Science Journal, 2023, p. 6555, doi. 10.17973/MMSJ.2023_06_2023038

By:

BLAHA, ROMAN;
KRISAK, DOMINIK;
HAJNYS, JIRI;
MESICEK, JAKUB;
PAGAC, MAREK;
JANCAR, LUKAS;
JANSA, JAN;
POSMYKOVA, ELISKA;
GAZDA, MAREK

Publication type:

Article

EFFECT OF CUTTING EDGE PREPARATION TECHNOLOGIES ON SURFACE ROUGHNESS, PROCESSING TIME AND K-FACTOR.

Published in:

MM Science Journal, 2023, p. 6550, doi. 10.17973/MMSJ.2023_06_2023037

By:

SLANINKOVA, ANETA;
JANSA, JAN;
JANECZKO, RADIM;
MRKVICA, IVAN;
PAGAC, MAREK;
JURGA, TIBOR

Publication type:

Article

RESEARCH TREND IN THE FIELD OF ADDITIVE MANUFACTURING WITH BIBLIOMETRICS STUDY.

Published in:

MM Science Journal, 2023, p. 6534, doi. 10.17973/MMSJ.2023_06_2023032

By:

HOANG-SY NGUYEN;
QUOC-PHU MA;
HAJNYS, JIRI;
MESICEK, JAKUB;
PAGAC, MAREK

Publication type:

Article

COPYRIGHT PROTECTION IN ADDITIVE MANUFACTURING.

Published in:

MM Science Journal, 2023, p. 6519, doi. 10.17973/MMSJ.2023_06_2023030

By:

HOANG-SY NGUYEN;
MINH THANH NGUYEN;
HAJNYS, JIRI;
PAGAC, MAREK

Publication type:

Article

OPTIMIZING A QUADRUPED ROBOT: A COMPARISON OF TWO METHODS.

Published in:

MM Science Journal, 2021, p. 4348, doi. 10.17973/MMSJ.2021_6_2021008

By:

PASTOR, ROBERT;
BOBOVSKY, ZDENKO;
OSCADAL, PETR;
MESICEK, JAKUB;
PAGAC, MAREK;
PRADA, ERIK;
MIKOVA, LUBICA;
BABJAK, JAN

Publication type:

Article

TOPOLOGICAL OPTIMIZATION OF THE FORMULA STUDENT BELL CRANK.

Published in:

MM Science Journal, 2019, p. 2964, doi. 10.17973/MMSJ.2019_10_201893

By:

MESICEK, JAKUB;
PAGAC, MAREK;
PETRU, JANA;
NOVAK, PETR;
HAJNYS, JIRI;
KUTIOVA, KRISTYNA

Publication type:

Article

INFLUENCE OF BASIC PROCESS PARAMETERS ON MECHANICAL AND INTERNAL PROPERTIES OF 316L STEEL IN SLM PROCESS FOR RENISHAW AM400.

Published in:

MM Science Journal, 2019, p. 2790, doi. 10.17973/MMSJ.2019_03_2018127

By:

HAJNYS, JIRI;
PAGAC, MAREK;
KOTERA, ONDREJ;
PETRU, JANA;
SCHOLZ, SEBASTIAN

Publication type:

Article

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study.

Published in:

Frontiers in Materials, 2024, p. 1, doi. 10.3389/fmats.2023.1336837

By:

Jatti, Vijaykumar S.;
Tamboli, Shahid;
Shaikh, Sarfaraj;
Solke, Nitin S.;
Gulia, Vikas;
Jatti, Vinaykumar S.;
Khedkar, Nitin K.;
Salunkhe, Sachin;
Pagáč, Marek;
Abouel Nasr, Emad S.

Publication type:

Article

Numerical investigation on effect of different projectile nose shapes on ballistic impact of additively manufactured AlSi10Mg alloy.

Published in:

Frontiers in Materials, 2024, p. 01, doi. 10.3389/fmats.2024.1330597

By:

Naik, Mahesh;
Pranay, V.;
Thakur, D. G.;
Chandel, Sunil;
Salunkhe, Sachin;
Pagac, Marek;
Abouel Nasr, Emad S.

Publication type:

Article

Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric.

Published in:

Nanomaterials (2079-4991), 2022, v. 12, n. 12, p. 2122, doi. 10.3390/nano12122122

By:

Irfan, Muhammad;
Hussain, Humaira;
Saleem, Bisma;
Saleem, Muhammad;
Shukrullah, Shazia;
Legutko, Stanislaw;
Petrů, Jana;
Naz, Muhammad Yasin;
Pagáč, Marek;
Rahman, Saifur;
Khan, Rehan

Publication type:

Article

Wear Performance of Cu–Cd, Cu–Be and Cu–Cr–Zr Spot Welding Electrode Materials.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 7, p. 291, doi. 10.3390/lubricants11070291

By:

Bachchhav, Bhanudas D.;
Chaitanya, Shrikant V.;
Salunkhe, Sachin;
Chandrakumar, Palanisamy;
Pagáč, Marek;
Nasr, Emad Abouel

Publication type:

Article

A Bibliometrics Analysis of Medical Internet of Things for Modern Healthcare.

Published in:

Electronics (2079-9292), 2023, v. 12, n. 22, p. 4586, doi. 10.3390/electronics12224586

By:

Nguyen, Hoang-Sy;
Danh, Huynh-Cong;
Ma, Quoc-Phu;
Mesicek, Jakub;
Hajnys, Jiri;
Pagac, Marek;
Petru, Jana

Publication type:

Article

Comprehensive View of Topological Optimization Scooter Frame Design and Manufacturing.

Published in:

Symmetry (20738994), 2021, v. 13, n. 7, p. 1201, doi. 10.3390/sym13071201

By:

Mesicek, Jakub;
Jancar, Lukas;
Ma, Quoc-Phu;
Hajnys, Jiri;
Tanski, Tomasz;
Krpec, Pavel;
Pagac, Marek

Publication type:

Article

Design Procedure of a Topologically Optimized Scooter Frame Part.

Published in:

Symmetry (20738994), 2020, v. 12, n. 5, p. 755, doi. 10.3390/sym12050755

By:

Jancar, Lukas;
Pagac, Marek;
Mesicek, Jakub;
Stefek, Petr

Publication type:

Article

Tensile strength analysis of additively manufactured CM 247LC alloy specimen by employing machine learning classifiers.

Published in:

PLoS ONE, 2024, v. 19, n. 7, p. 1, doi. 10.1371/journal.pone.0305744

By:

Jatti, Vijaykumar S.;
Sawant, Dhruv A.;
Khedkar, Nitin K.;
Jatti, Vinaykumar S.;
Salunkhe, Sachin;
Pagáč, Marek;
Abouel Nasr, Emad S.

Publication type:

Article

Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy.

Published in:

Advances in Science & Technology Research Journal, 2020, v. 14, n. 1, p. 89, doi. 10.12913/22998624/113615

By:

Petrů, Jana;
Drábek, Lukáš;
Hajnyš, Jiří;
Jurok, Dalibor;
Pagáč, Marek;
Měsíček, Jakub

Publication type:

Article

THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER.

Published in:

Advances in Science & Technology Research Journal, 2018, v. 12, n. 2, p. 197, doi. 10.12913/22998624/91890

By:

Kratochvíl, Jiří;
Sadílek, Marek;
Musil, Václav;
Pagáč, Marek;
Stančeková, Dana

Publication type:

Article

EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45.

Published in:

Advances in Science & Technology Research Journal, 2017, v. 11, n. 1, p. 173, doi. 10.12913/22998624/66506

By:

Kratochvíl, Jiří;
Petrů, Jana;
Pagáč, Marek;
Holubják, Jozef;
Mrazik, Jozef

Publication type:

Article

IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625.

Published in:

Advances in Science & Technology Research Journal, 2016, v. 10, n. 32, p. 24, doi. 10.12913/22998624/65111

By:

Hajny, Jiří;
Zlámal, Tomá;
Petrů, Jana;
Pagáč, Marek;
Rudawska, Anna

Publication type:

Article

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING SPECIAL ALLOYS.

Published in:

Advances in Science & Technology Research Journal, 2016, v. 10, n. 31, p. 144, doi. 10.12913/22998624/64074

By:

Zlámal, Tomáš;
Petrů, Jana;
Vortel, Ondřej;
Pagáč, Marek;
Krajkovič, Pavel

Publication type:

Article

Laser Beam Drilling of Inconel 718 and Its Effect on Mechanical Properties Determined by Static Uniaxial Tensile Testing at Room and Elevated Temperatures.

Published in:

Materials (1996-1944), 2021, v. 14, n. 11, p. 3052, doi. 10.3390/ma14113052

By:

Petrů, Jana;
Pagáč, Marek;
Grepl, Martin

Publication type:

Article

Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L.

Published in:

Materials (1996-1944), 2021, v. 14, n. 1, p. 33, doi. 10.3390/ma14010033

By:

Kořínek, Michal;
Halama, Radim;
Fojtík, František;
Pagáč, Marek;
Krček, Jiří;
Krzikalla, David;
Kocich, Radim;
Kunčická, Lenka

Publication type:

Article

Hot Deformation Treatment of Grain-Modified Mg–Li Alloy.

Published in:

Materials (1996-1944), 2020, v. 13, n. 20, p. 4557, doi. 10.3390/ma13204557

By:

Król, Mariusz;
Snopiński, Przemysław;
Pagáč, Marek;
Hajnyš, Jiří;
Petrů, Jana

Publication type:

Article

Effect of Hot Isostatic Pressing on Porosity and Mechanical Properties of 316 L Stainless Steel Prepared by the Selective Laser Melting Method.

Published in:

Materials (1996-1944), 2020, v. 13, n. 19, p. 4377, doi. 10.3390/ma13194377

By:

Cegan, Tomas;
Pagac, Marek;
Jurica, Jan;
Skotnicova, Katerina;
Hajnys, Jiri;
Horsak, Lukas;
Soucek, Kamil;
Krpec, Pavel

Publication type:

Article

Analysis of Welded Joint Properties on an AISI316L Stainless Steel Tube Manufactured by SLM Technology.

Published in:

Materials (1996-1944), 2020, v. 13, n. 19, p. 4362, doi. 10.3390/ma13194362

By:

Mohyla, Petr;
Hajnys, Jiri;
Sternadelová, Kristýna;
Krejčí, Lucie;
Pagáč, Marek;
Konečná, Kateřina;
Krpec, Pavel

Publication type:

Article

Selective Laser Melting of 18NI-300 Maraging Steel.

Published in:

Materials (1996-1944), 2020, v. 13, n. 19, p. 4268, doi. 10.3390/ma13194268

By:

Król, Mariusz;
Snopiński, Przemysław;
Hajnyš, Jiří;
Pagáč, Marek;
Łukowiec, Dariusz

Publication type:

Article

Influence of Scanning Strategy Parameters on Residual Stress in the SLM Process According to the Bridge Curvature Method for AISI 316L Stainless Steel.

Published in:

Materials (1996-1944), 2020, v. 13, n. 7, p. 1659, doi. 10.3390/ma13071659

By:

Hajnys, Jiri;
Pagáč, Marek;
Měsíček, Jakub;
Petru, Jana;
Król, Mariusz

Publication type:

Article

Complex Corrosion Properties of AISI 316L Steel Prepared by 3D Printing Technology for Possible Implant Applications.

Published in:

Materials (1996-1944), 2020, v. 13, n. 7, p. 1527, doi. 10.3390/ma13071527

By:

Hlinka, Josef;
Kraus, Martin;
Hajnys, Jiri;
Pagac, Marek;
Petrů, Jana;
Brytan, Zbigniew;
Tański, Tomasz

Publication type:

Article

Residual Stress Distribution in Dievar Tool Steel Bars Produced by Conventional Additive Manufacturing and Rotary Swaging Processes.

Published in:

Materials (1996-1944), 2024, v. 17, n. 23, p. 5706, doi. 10.3390/ma17235706

By:

Izák, Josef;
Strunz, Pavel;
Levytska, Olena;
Németh, Gergely;
Šaroun, Jan;
Kocich, Radim;
Pagáč, Marek;
Tuharin, Kostyantyn

Publication type:

Article

Topology Optimization of the Clutch Lever Manufactured by Additive Manufacturing.

Published in:

Materials (1996-1944), 2023, v. 16, n. 9, p. 3510, doi. 10.3390/ma16093510

By:

Mikulikova, Aleksandra;
Mesicek, Jakub;
Karger, Jan;
Hajnys, Jiri;
Ma, Quoc-Phu;
Sliva, Ales;
Smiraus, Jakub;
Srnicek, David;
Cienciala, Samuel;
Pagac, Marek

Publication type:

Article

Enhancement of Magnetic and Dielectric Properties of Ni 0.25 Cu 0.25 Zn 0.50 Fe 2 O 4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications.

Published in:

Materials (1996-1944), 2022, v. 15, n. 19, p. 6890, doi. 10.3390/ma15196890

By:

Munir, Muhammad Adnan;
Naz, Muhammad Yasin;
Shukrullah, Shazia;
Ansar, Muhammad Tamoor;
Farooq, Muhammad Umar;
Irfan, Muhammad;
Mursal, Salim Nasar Faraj;
Legutko, Stanislaw;
Petrů, Jana;
Pagáč, Marek

Publication type:

Article

Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method.

Published in:

Materials (1996-1944), 2022, v. 15, n. 17, p. 6057, doi. 10.3390/ma15176057

By:

Ma, Quoc-Phu;
Mesicek, Jakub;
Fojtik, Frantisek;
Hajnys, Jiri;
Krpec, Pavel;
Pagac, Marek;
Petru, Jana

Publication type:

Article

Microstructural and Mechanical Properties of Novel Co-Free Maraging Steel M789 Prepared by Additive Manufacturing.

Published in:

Materials (1996-1944), 2022, v. 15, n. 5, p. 1734, doi. 10.3390/ma15051734

By:

Brytan, Zbigniew;
Król, Mariusz;
Benedyk, Marcin;
Pakieła, Wojciech;
Tański, Tomasz;
Dagnaw, Mengistu Jemberu;
Snopiński, Przemysław;
Pagáč, Marek;
Czech, Adam

Publication type:

Article

Microstructural Evolution, Hardness, and Strengthening Mechanisms in SLM AlSi10Mg Alloy Subjected to Equal-Channel Angular Pressing (ECAP).

Published in:

Materials (1996-1944), 2021, v. 14, n. 24, p. 7598, doi. 10.3390/ma14247598

By:

Snopiński, Przemysław;
Woźniak, Anna;
Pagáč, Marek

Publication type:

Article

Research and Optimization of 3D Printing Process Parameters for Supportless 3D Printing with Powder Bed Fusion Selective Laser Melting.

Published in:

Scientific Bulletin Series C: Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 2022, v. 2022, n. 36, p. 31

By:

Marek, Pagac;
Hajnys, Jiri;
Krejčí, Jan;
Hlavsa, Josef;
Kratochvil, Jiri

Publication type:

Article

Machine learning-assisted pattern recognition algorithms for estimating ultimate tensile strength in fused deposition modelled polylactic acid specimens.

Published in:

Materials Technology, 2024, v. 39, n. 1, p. 1, doi. 10.1080/10667857.2023.2295089

By:

Mishra, Akshansh;
Jatti, Vijaykumar S.;
Messele Sefene, Eyob;
Jatti, Ashwini V.;
Sisay, Addisalem Desalegn;
Khedkar, Nitin K.;
Salunkhe, Sachin;
Pagáč, Marek;
Abouel Nasr, Emad S.

Publication type:

Article

Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique.

Published in:

Polymers (20734360), 2023, v. 15, n. 1, p. 47, doi. 10.3390/polym15010047

By:

Šofer, Michal;
Šofer, Pavel;
Pagáč, Marek;
Volodarskaja, Anastasia;
Babiuch, Marek;
Gruň, Filip

Publication type:

Article

Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane.

Published in:

Polymers (20734360), 2022, v. 14, n. 24, p. 5496, doi. 10.3390/polym14245496

By:

Schwarz, David;
Pagáč, Marek;
Petruš, Josef;
Polzer, Stanislav

Publication type:

Article

Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix.

Published in:

Polymers (20734360), 2022, v. 14, n. 17, p. 3501, doi. 10.3390/polym14173501

By:

Gnatowski, Adam;
Gołębski, Rafał;
Petru, Jana;
Pagac, Marek

Publication type:

Article

Effect of Additives and Print Orientation on the Properties of Laser Sintering-Printed Polyamide 12 Components.

Published in:

Polymers (20734360), 2022, v. 14, n. 6, p. 1172, doi. 10.3390/polym14061172

By:

Zárybnická, Lucie;
Petrů, Jana;
Krpec, Pavel;
Pagáč, Marek

Publication type:

Article

3D Printed Hollow Off-Axis Profiles Based on Carbon Fiber-Reinforced Polymers: Mechanical Testing and Finite Element Method Analysis.

Published in:

Polymers (20734360), 2021, v. 13, n. 17, p. 2949, doi. 10.3390/polym13172949

By:

Kalova, Martina;
Rusnakova, Sona;
Krzikalla, David;
Mesicek, Jakub;
Tomasek, Radek;
Podeprelova, Adela;
Rosicky, Jiri;
Pagac, Marek

Publication type:

Article

A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing.

Published in:

Polymers (20734360), 2021, v. 13, n. 4, p. 598, doi. 10.3390/polym13040598

By:

Pagac, Marek;
Hajnys, Jiri;
Ma, Quoc-Phu;
Jancar, Lukas;
Jansa, Jan;
Stefek, Petr;
Mesicek, Jakub;
Egan, Paul F.

Publication type:

Article

DETECTION OF GRINDING BURN THROUGH THE HIGH AND LOW FREQUENCY BARKHAUSEN NOISE.

Published in:

Technical Gazette / Tehnički Vjesnik, 2017, v. 24, p. 71, doi. 10.17559/TV-20140203083223

By:

Mičietová, Anna;
Neslušan, Miroslav;
Čep, Robert;
Ochodek, Vladislav;
Mičieta, Branislav;
Pagáč, Marek

Publication type:

Article

Abrasive Surface Finishing on SLM 316L Parts Fabricated with Recycled Powder.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 6, p. 2869, doi. 10.3390/app11062869

By:

Mesicek, Jakub;
Ma, Quoc-Phu;
Hajnys, Jiri;
Zelinka, Jan;
Pagac, Marek;
Petru, Jana;
Mizera, Ondrej;
Bi, Guijun

Publication type:

Article