Found: 407
Select item for more details and to access through your institution.
Comparison of three multichannel transmit/receive radiofrequency coil configurations for anatomic and functional cardiac MRI at 7.0T: implications for clinical imaging.
- Published in:
- 2012
- By:
- Publication type:
- journal article
Development and evaluation of a small and mobile Magneto Alert Sensor (MALSE) to support safety requirements for magnetic resonance imaging.
- Published in:
- 2011
- By:
- Publication type:
- journal article
Toward cardiovascular MRI at 7 T: clinical needs, technical solutions and research promises.
- Published in:
- 2010
- By:
- Publication type:
- journal article
Cardiac chamber quantification using magnetic resonance imaging at 7 Tesla--a pilot study.
- Published in:
- 2010
- By:
- Publication type:
- journal article
Comparison of image quality in magnetic resonance imaging of the knee at 1.5 and 3.0 Tesla using 32-channel receiver coils.
- Published in:
- 2008
- By:
- Publication type:
- journal article
Editorial.
- Published in:
- Freie Assoziation, 2024, v. 27, n. 1, p. 5, doi. 10.30820/1434-7849-2024-1-5
- By:
- Publication type:
- Article
Influence of Defects and Microstructure on the Thermal Expansion Behavior and the Mechanical Properties of Additively Manufactured Fe-36Ni.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 17, p. 4313, doi. 10.3390/ma17174313
- By:
- Publication type:
- Article
Precision fMRI and cluster‐failure in the individual brain.
- Published in:
- Human Brain Mapping, 2024, v. 45, n. 12, p. 1, doi. 10.1002/hbm.26813
- By:
- Publication type:
- Article
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2022, v. 53, n. 12, p. 1479, doi. 10.1002/mawe.202200116
- By:
- Publication type:
- Article
On the impact of deep rolling at different temperatures on the near surface microstructure and residual stress state of steel AISI 304.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2019, v. 50, n. 7, p. 788, doi. 10.1002/mawe.201700198
- By:
- Publication type:
- Article
Integrity Assessment of Electron‐Beam‐Welded Joints of Additively Manufactured AlSi10Mg Components.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 2, p. 1, doi. 10.1002/adem.202301401
- By:
- Publication type:
- Article
On the Monotonic and Cyclic Behavior of an Al‐Mg‐Zn‐Cu‐Si Compositionally Complex Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 21, p. 1, doi. 10.1002/adem.202300892
- By:
- Publication type:
- Article
On the Reliability of Automated Analysis of Fracture Surfaces Using a Novel Computer Vision‐Based Tool.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 21, p. 1, doi. 10.1002/adem.202300876
- By:
- Publication type:
- Article
Experimental Analysis of the Stability of Retained Austenite in a Low‐Alloy 42CrSi Steel after Different Quenching and Partitioning Heat Treatments.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 17, p. 1, doi. 10.1002/adem.202300380
- By:
- Publication type:
- Article
Structural Materials.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202300890
- By:
- Publication type:
- Article
Low‐Cycle‐Fatigue Performance of Stress‐Aged EN AW‐7075 Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202300090
- By:
- Publication type:
- Article
High‐Throughput Alloy Development Using Advanced Characterization Techniques During Directed Energy Deposition Additive Manufacturing.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202300030
- By:
- Publication type:
- Article
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201879
- By:
- Publication type:
- Article
Effect of Friction Stir Processing on the Fatigue Performance of AZ31 Magnesium Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201638
- By:
- Publication type:
- Article
On the Friction Stir Processing of Additive‐Manufactured 316L Stainless Steel.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 10, p. 1, doi. 10.1002/adem.202200384
- By:
- Publication type:
- Article
On the Impact of Additive Manufacturing Processes on the Microstructure and Magnetic Properties of Co–Ni–Ga Shape Memory Heusler Alloys.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 10, p. 1, doi. 10.1002/adem.202200069
- By:
- Publication type:
- Article
Residual Stresses in Ultrafine‐Grained Laminated Metal Composites Analyzed by X‐ray Diffraction and the Hole‐Drilling Method.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 9, p. 1, doi. 10.1002/adem.202200274
- By:
- Publication type:
- Article
A Novel Approach to Robustly Determine Residual Stress in Additively Manufactured Microstructures Using Synchrotron Radiation.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100184
- By:
- Publication type:
- Article
Hot Work Tool Steel Processed by Laser Powder Bed Fusion: A Review on Most Relevant Influencing Factors.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 7, p. 1, doi. 10.1002/adem.202100049
- By:
- Publication type:
- Article
Hot Work Tool Steel Processed by Laser Powder Bed Fusion: A Review on Most Relevant Influencing Factors.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 7, p. 1, doi. 10.1002/adem.202100049
- By:
- Publication type:
- Article
Hot Work Tool Steel Processed by Laser Powder Bed Fusion: A Review on Most Relevant Influencing Factors.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 7, p. 1, doi. 10.1002/adem.202100049
- By:
- Publication type:
- Article
On the Microstructural and Cyclic Mechanical Properties of Pure Iron Processed by Electron Beam Melting.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 6, p. 1, doi. 10.1002/adem.202100018
- By:
- Publication type:
- Article
Additive Manufacturing of Polymer Matrix Composite Materials with Aligned or Organized Filler Material: A Review.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 4, p. 1, doi. 10.1002/adem.202001002
- By:
- Publication type:
- Article
On the Influence of Microstructure on the Corrosion Behavior of Fe–Mn–Al–Ni Shape Memory Alloy in 5.0 wt% NaCl Solution.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 2, p. 1, doi. 10.1002/adem.202000865
- By:
- Publication type:
- Article
Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermomechanical Treatment Strategies.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 8, p. 1, doi. 10.1002/adem.202000193
- By:
- Publication type:
- Article
Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermomechanical Treatment Strategies.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 8, p. 1, doi. 10.1002/adem.202000193
- By:
- Publication type:
- Article
Effect of Grain Statistics on Micromechanical Modeling: The Example of Additively Manufactured Materials Examined by Electron Backscatter Diffraction.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 5, p. 1, doi. 10.1002/adem.201901416
- By:
- Publication type:
- Article
Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components.
- Published in:
- Advanced Engineering Materials, 2019, v. 21, n. 7, p. N.PAG, doi. 10.1002/adem.201900275
- By:
- Publication type:
- Article
Functionally Graded Alloys Obtained by Additive Manufacturing.
- Published in:
- Advanced Engineering Materials, 2014, v. 16, n. 7, p. 857, doi. 10.1002/adem.201300579
- By:
- Publication type:
- Article
Fatigue Damage Evolution in Ultrafine-Grained Interstitial-Free Steel.
- Published in:
- Advanced Engineering Materials, 2011, v. 13, n. 4, p. 275, doi. 10.1002/adem.201000272
- By:
- Publication type:
- Article
Experimental and Numerical Investigation of the Role of Grain Boundary Misorientation Angle on the Dislocation-Grain Boundary Interactions.
- Published in:
- Advanced Engineering Materials, 2011, v. 13, n. 4, p. 281, doi. 10.1002/adem.201000229
- By:
- Publication type:
- Article
Optic radiation damage in multiple sclerosis is associated with visual dysfunction and retinal thinning - an ultrahigh-field MR pilot study.
- Published in:
- European Radiology, 2015, v. 25, n. 1, p. 122, doi. 10.1007/s00330-014-3358-8
- By:
- Publication type:
- Article
Optic radiation damage in multiple sclerosis is associated with visual dysfunction and retinal thinning--an ultrahigh-field MR pilot study.
- Published in:
- 2015
- By:
- Publication type:
- journal article
Ultrahigh field magnetic resonance and colour Doppler real-time fusion imaging of the orbit--a hybrid tool for assessment of choroidal melanoma.
- Published in:
- 2014
- By:
- Publication type:
- journal article
Ultrahigh field magnetic resonance and colour Doppler real-time fusion imaging of the orbit - a hybrid tool for assessment of choroidal melanoma.
- Published in:
- European Radiology, 2014, v. 24, n. 5, p. 1112, doi. 10.1007/s00330-014-3101-5
- By:
- Publication type:
- Article
MRI of Implantation Sites Using Parallel Transmission of an Optimized Radiofrequency Excitation Vector.
- Published in:
- Tomography: A Journal for Imaging Research, 2023, v. 9, n. 2, p. 603, doi. 10.3390/tomography9020049
- By:
- Publication type:
- Article
Accelerated Simultaneous T 2 and T 2 * Mapping of Multiple Sclerosis Lesions Using Compressed Sensing Reconstruction of Radial RARE-EPI MRI.
- Published in:
- Tomography: A Journal for Imaging Research, 2023, v. 9, n. 1, p. 299, doi. 10.3390/tomography9010024
- By:
- Publication type:
- Article
Parametric MRI Detects Aristolochic Acid Induced Acute Kidney Injury.
- Published in:
- Tomography: A Journal for Imaging Research, 2022, v. 8, n. 6, p. 2902, doi. 10.3390/tomography8060243
- By:
- Publication type:
- Article
Helmet Radio Frequency Phased Array Applicators Enhance Thermal Magnetic Resonance of Brain Tumors.
- Published in:
- Bioengineering (Basel), 2024, v. 11, n. 7, p. 733, doi. 10.3390/bioengineering11070733
- By:
- Publication type:
- Article
The impact of option introduction on stock return...
- Published in:
- Financial Review, 1997, v. 32, n. 1, p. 125, doi. 10.1111/j.1540-6288.1997.tb00418.x
- By:
- Publication type:
- Article
Normothermic Mouse Functional MRI of Acute Focal Thermostimulation for Probing Nociception.
- Published in:
- Scientific Reports, 2016, p. 17230, doi. 10.1038/srep17230
- By:
- Publication type:
- Article
Anchoring Dipalmitoyl Phosphoethanolamine to Nanoparticles Boosts Cellular Uptake and Fluorine-19 Magnetic Resonance Signal.
- Published in:
- Scientific Reports, 2015, p. 8427, doi. 10.1038/srep08427
- By:
- Publication type:
- Article
Genetic and functional analysis of CHEK2 ( CHK2) variants in multiethnic cohorts.
- Published in:
- International Journal of Cancer, 2007, v. 121, n. 12, p. 2661, doi. 10.1002/ijc.23026
- By:
- Publication type:
- Article
Adaptation of Cellular Metabolism to Anisosmotic Conditions in a Glial Cell Line, as Assessed by <sup>13</sup>C-NMR Spectroscopy.
- Published in:
- Developmental Neuroscience, 1996, v. 18, n. 5/6, p. 449, doi. 10.1159/000111440
- By:
- Publication type:
- Article
Feasibility and benefit of using a cryogenic radiofrequency coil for functional cardiac magnetic resonance imaging of mice at 9.4 T.
- Published in:
- 2013
- By:
- Publication type:
- Abstract