Works by Nasr, Emad Abouel

Results: 99

A comparison study on the design of mirror and anatomy reconstruction technique in maxillofacial region.

Published in:

2016

By:

Moiduddin, Khaja;
Al-Ahmari, Abdulrahman;
Abouel Nasr, Emad S.;
Mian, Syed Hammad;
Al Kindi, Mohammed;
Nasr, Emad S Abouel

Publication type:

journal article

Failure mode identification and effects analysis of mobile X-ray machine using selected MADM techniques.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-09518-6

By:

Sisodia, Vikas;
Ganesan, Dharmalingam;
Salunkhe, Sachin;
Čep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Sperm Abnormality Detection Using Sequential Deep Neural Network.

Published in:

Mathematics (2227-7390), 2023, v. 11, n. 3, p. 515, doi. 10.3390/math11030515

By:

Shahzad, Suleman;
Ilyas, Muhammad;
Lali, M. Ikram Ullah;
Rauf, Hafiz Tayyab;
Kadry, Seifedine;
Nasr, Emad Abouel

Publication type:

Article

Prediction of Thrust Force and Torque for High-Speed Drilling of AL6061 with TMPTO-Based Bio-Lubricants Using Machine Learning.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 356, doi. 10.3390/lubricants11090356

By:

Kathmore, Pramod;
Bachchhav, Bhanudas;
Nandi, Somnath;
Salunkhe, Sachin;
Chandrakumar, Palanisamy;
Nasr, Emad Abouel;
Kamrani, Ali

Publication type:

Article

Wear Performance of Cu–Cd, Cu–Be and Cu–Cr–Zr Spot Welding Electrode Materials.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 7, p. 291, doi. 10.3390/lubricants11070291

By:

Bachchhav, Bhanudas D.;
Chaitanya, Shrikant V.;
Salunkhe, Sachin;
Chandrakumar, Palanisamy;
Pagáč, Marek;
Nasr, Emad Abouel

Publication type:

Article

Radio-Frequency-Identification-Based 3D Human Pose Estimation Using Knowledge-Level Technique.

Published in:

Electronics (2079-9292), 2023, v. 12, n. 2, p. 374, doi. 10.3390/electronics12020374

By:

Altaf, Saud;
Haroon, Muhammad;
Ahmad, Shafiq;
Nasr, Emad Abouel;
Zaindin, Mazen;
Huda, Shamsul;
Rehman, Zia ur

Publication type:

Article

Feature-based design approach for integrated CAD and computer-aided inspection planning.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 76, n. 9-12, p. 2159, doi. 10.1007/s00170-014-6396-0

By:

Kamrani, Ali;
Abouel Nasr, Emad;
Al-Ahmari, Abdulrahman;
Abdulhameed, Osama;
Mian, Syed

Publication type:

Article

Breast cancer diagnosis using support vector machine optimized by improved quantum inspired grey wolf optimization.

Published in:

Scientific Reports, 2024, v. 14, n. 1, p. 1, doi. 10.1038/s41598-024-61322-w

By:

Bilal, Anas;
Imran, Azhar;
Baig, Talha Imtiaz;
Liu, Xiaowen;
Abouel Nasr, Emad;
Long, Haixia

Publication type:

Article

Surface roughness prediction of AISI D2 tool steel during powder mixed EDM using supervised machine learning.

Published in:

Scientific Reports, 2024, v. 14, n. 1, p. 1, doi. 10.1038/s41598-024-60543-3

By:

Kaigude, Amreeta R.;
Khedkar, Nitin K.;
Jatti, Vijaykumar S.;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Optimization of Wire EDM Process Parameters for Machining Hybrid Composites Using Grey Relational Analysis.

Published in:

Crystals (2073-4352), 2023, v. 13, n. 11, p. 1549, doi. 10.3390/cryst13111549

By:

Jebarose Juliyana, Sunder;
Udaya Prakash, Jayavelu;
Rubi, Charles Sarala;
Salunkhe, Sachin;
Gawade, Sharad Ramdas;
Abouel Nasr, Emad S.;
Kamrani, Ali K.

Publication type:

Article

Mechanical Characterization and Microstructural Analysis of Stir-Cast Aluminum Matrix Composites (LM5/ZrO 2).

Published in:

Crystals (2073-4352), 2023, v. 13, n. 8, p. 1220, doi. 10.3390/cryst13081220

By:

Prakash, Jayavelu Udaya;
Jebarose Juliyana, Sunder;
Salunkhe, Sachin;
Gawade, Sharad Ramdas;
Nasr, Emad S. Abouel;
Kamrani, Ali K.

Publication type:

Article

In Vitro and Electrochemical Characterization of Laser-Cladded Ti-Nb-Ta Alloy for Biomedical Applications.

Published in:

Crystals (2073-4352), 2022, v. 12, n. 7, p. N.PAG, doi. 10.3390/cryst12070954

By:

Soni, Raj;
Pande, Sarang;
Salunkhe, Sachin;
Natu, Harshad;
Abouel Nasr, Emad;
Shanmugam, Ragavanantham;
Hussein, Hussein Mohammed Abdel Moneam

Publication type:

Article

Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route.

Published in:

Crystals (2073-4352), 2022, v. 12, n. 7, p. N.PAG, doi. 10.3390/cryst12070923

By:

Murali, Arun Prasad;
Ganesan, Dharmalingam;
Salunkhe, Sachin;
Abouel Nasr, Emad;
Davim, João Paulo;
Hussein, Hussein Mohamed Abdelmoneam

Publication type:

Article

Analysis of Wear Using the Taguchi Method in TiSiNOS-Coated and Uncoated H13 Tool Steel.

Published in:

Coatings (2079-6412), 2023, v. 13, n. 10, p. 1781, doi. 10.3390/coatings13101781

By:

Alphonse, Mathew;
Murali, Arun Prasad;
Salunkhe, Sachin;
Gawade, Sharad Ramdas;
Naveen Kumar, Boddu V. S. G.;
Nasr, Emad Abouel;
Kamrani, Ali

Publication type:

Article

Extended Elementary Siphons and Their Application to Liveness-Enforcement of Generalized Petri Nets.

Published in:

Asian Journal of Control, 2014, v. 16, n. 6, p. 1789, doi. 10.1002/asjc.801

By:

Hou, YiFan;
Li, ZhiWu;
Al‐Ahmari, Abdulrahman M.;
El‐Tamimi, Abdul‐Aziz Mohammed;
Nasr, Emad Abouel

Publication type:

Article

MULTI-OBJECTIVE OPTIMIZATION MODELING OF INTEGRATED SUPPLY CHAIN FOR SOLID WASTE TREATMENT.

Published in:

International Journal of Industrial Engineering, 2023, v. 30, n. 1, p. 147, doi. 10.23055/ijietap.2023.30.1.8647

By:

Fararah, Emad;
Nasr, Emad Abouel;
Mahmoud, Haitham Abbas

Publication type:

Article

On the Performance of a Nonlinear Position-Velocity Controller to Stabilize Rotor-Active Magnetic-Bearings System.

Published in:

Symmetry (20738994), 2021, v. 13, n. 11, p. 2069, doi. 10.3390/sym13112069

By:

El-Shourbagy, Sabry M.;
Saeed, Nasser A.;
Kamel, Magdi;
Raslan, Kamal R.;
Abouel Nasr, Emad;
Awrejcewicz, Jan

Publication type:

Article

Nonlinear Dynamics and Motion Bifurcations of the Rotor Active Magnetic Bearings System with a New Control Scheme and Rub-Impact Force.

Published in:

Symmetry (20738994), 2021, v. 13, n. 8, p. 1502, doi. 10.3390/sym13081502

By:

Saeed, Nasser A.;
Mahrous, Emad;
Abouel Nasr, Emad;
Awrejcewicz, Jan

Publication type:

Article

Electrical Efficiency Investigation on Photovoltaic Thermal Collector with Two Different Coolants.

Published in:

Sustainability (2071-1050), 2023, v. 15, n. 7, p. 6136, doi. 10.3390/su15076136

By:

Abouel Nasr, Emad;
Mahmoud, Haitham A.;
El-Meligy, Mohammed A.;
Awwad, Emad Mahrous;
Salunkhe, Sachin;
Naranje, Vishal;
Swarnalatha, R.;
Abu Qudeiri, Jaber E.

Publication type:

Article

Sustainable Design of Self-Consolidating Green Concrete with Partial Replacements for Cement through Neural-Network and Fuzzy Technique.

Published in:

Sustainability (2071-1050), 2023, v. 15, n. 6, p. 4752, doi. 10.3390/su15064752

By:

Han, Shaoyong;
Zheng, Dongsong;
Mehdizadeh, Bahareh;
Nasr, Emad Abouel;
Khandaker, Mayeen Uddin;
Salman, Mohammad;
Mehrabi, Peyman

Publication type:

Article

Assessing Spatial-Temporal Changes in Monetary Values of Urban Ecosystem Services through Remotely Sensed Data.

Published in:

Sustainability (2071-1050), 2022, v. 14, n. 22, p. 15136, doi. 10.3390/su142215136

By:

Zaman-ul-Haq, Muhammad;
Kanwal, Ambrina;
Gardezi, Akber Abid;
Fatima, Hina;
Saqib, Zafeer;
Bokhari, Syed Atif;
Nasr, Emad Abouel;
Ahmad, Shafiq;
Shafiq, Muhammad

Publication type:

Article

Tribological and investigation study of a dlc-coated H13 friction drilling tool on AZ31B magnesium alloy.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1470507

By:

Alphonse, Mathew;
Raja, V. K. Bupesh;
Cepova, Lenka;
Salunkhe, Sachin;
Nasr, Emad Abouel;
Abdelgawad, Abdelaty Edrees

Publication type:

Article

Analysis of the thickness of layered armor to provide protection against 7.62 mm ball projectiles using experimental and numerical methods.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1419210

By:

Morghode, Divyanshu S.;
Thakur, D. G.;
Salunkhe, Sachin;
Cepova, Lenka;
Nasr, Emad Abouel

Publication type:

Article

Condition monitoring of a CNC hobbing cutter using machine learning approach.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2024, v. 16, n. 9, p. 1, doi. 10.1177/16878132241275750

By:

Tambake, Nagesh;
Deshmukh, Bhagyesh;
Pardeshi, Sujit;
Salunkhe, Sachin;
Čep, Robert;
Abouel Nasr, Emad

Publication type:

Article

Metaheuristics for optimizing unrelated parallel machines scheduling with unreliable resources to minimize makespan.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2022, v. 14, n. 5, p. 1, doi. 10.1177/16878132221097023

By:

Kaid, Husam;
Al-Ahmari, Abdulrahman;
Al-Shayea, Adel;
Abouel Nasr, Emad;
Kamrani, Ali K;
Mahmoud, Haitham A

Publication type:

Article

A NEW ASSOCIATION ANALYSIS-BASED METHOD FOR ENHANCING MAINTENANCE AND REPAIR IN MANUFACTURING.

Published in:

Transactions of FAMENA, 2021, v. 45, n. 4, p. 85, doi. 10.21278/TOF.454025420

By:

Al-Shayea, Adel;
Nasr, Emad Abouel;
Al-Mubaid, Hisham;
Al-Ahmari, Abdulrahman;
Kamrani, Ali K.;
Kaid, Husam;
Mahmoud, Haitham A.

Publication type:

Article

Flexural wave propagation characteristics of advanced nanocomposites reinforced sandwich structure via 3D-flexibility-deep neural networks approaches.

Published in:

Mechanics Based Design of Structures & Machines, 2024, v. 52, n. 12, p. 10583, doi. 10.1080/15397734.2024.2357261

By:

Yang, Xiaohua;
Jiang, Lijian;
Long, Feng;
Abouel Nasr, Emad

Publication type:

Article

Performance improvement of set of worm gears used in soot blower through profile modification.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1360502

By:

Honkalas, Rahul;
Deshmukh, Bhagyesh;
Pawar, Prabhakar;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Vibration analysis of piping connected with shipboard equipment.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 01, doi. 10.3389/fmech.2024.1396170

By:

Tripathi, Radharaman;
Jadhav, Tushar A.;
Gaikwad, Mahesh K.;
Naidu, Mithul J.;
Gawand, Aishwarya B.;
Kaya, Duran;
Salunkhe, Sachin;
Cep, Robert;
Abouel Nasr, Emad

Publication type:

Article

Experimental investigation of tungsten-nickel-iron alloy, W95Ni3.5Fe1.5, compared to copper monolithic bullets.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1383341

By:

Abhishek, T.;
Sundeep, Dola;
Sastry, C. Chandrasekhara;
Eswaramoorthy, K. V.;
Kesireddy, Gagan Chaitanya;
Reddy, Bobbili Veera Siva;
Verma, Rakesh Kumar;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Numerical study on the optimized thickness of layer configuration against the 7.62 APM2 projectile.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1322640

By:

Morghode, Divyanshu S.;
Thakur, D. G.;
Salunkhe, Sachin;
Cepova, Lenka;
Nasr, Emad Abouel

Publication type:

Article

Performance evaluation of looped tube thermoacoustic power generator using cyclic analysis.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 1, doi. 10.3389/fmech.2024.1357332

By:

Gaikwad, Mahesh K.;
Shinde, Savita U.;
Naidu, Mithul J.;
Jadhav, Tushar A.;
Kumar, Rakesh;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Comprehensive design and analysis of a 300L steel fuel tank for heavy off-road vehicles: numerical and experimental insights.

Published in:

Frontiers in Mechanical Engineering, 2024, p. 01, doi. 10.3389/fmech.2024.1360590

By:

Verma, Aditya;
Shankar, Ravi;
Shaik, Ameer Malik;
Siva Reddy, B. Veera;
Sastry, C. Chandrasekhara;
Shaik, Nizmi;
Salunkhe, Sachin;
Cep, Robert;
Abouel Nasr, Emad

Publication type:

Article

Prediction of machine learning-based hardness for the polycarbonate using additive manufacturing.

Published in:

Frontiers in Materials, 2024, p. 1, doi. 10.3389/fmats.2024.1410277

By:

Mahmoud, Haitham A.;
Shanmugasundar, G.;
Vyavahare, Swapnil;
Kumar, Rakesh;
Cep, Robert;
Salunkhe, Sachin;
Gawade, Sharad;
Nasr, Emad S. Abouel

Publication type:

Article

Machine learning for monitoring hobbing tool health in CNC hobbing machine.

Published in:

Frontiers in Materials, 2024, p. 1, doi. 10.3389/fmats.2024.1377941

By:

Tambake, Nagesh;
Deshmukh, Bhagyesh;
Pardeshi, Sujit;
Mahmoud, Haitham A.;
Cep, Robert;
Salunkhe, Sachin;
Nasr, Emad Abouel

Publication type:

Article

Tribological analysis of titanium alloy (Ti-6Al-4V) hybrid metal matrix composite through the use of Taguchi's method and machine learning classifiers.

Published in:

Frontiers in Materials, 2024, p. 1, doi. 10.3389/fmats.2024.1375200

By:

Jatti, Vijaykumar S.;
Sawant, Dhruv A.;
Deshpande, Rashmi;
Saluankhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel;
Mahmoud, Haitham A.

Publication type:

Article

Tribological investigations of hemp reinforced NAO brake friction polymer composites with varying percentage of resin loading.

Published in:

Frontiers in Materials, 2024, p. 1, doi. 10.3389/fmats.2024.1348265

By:

Naidu, Mithul;
Bhosale, Ajit;
Gaikwad, Mahesh;
Salunkhe, Sachin;
Čep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Impact of geopolymer aggregate on the mechanical properties and durability characteristics of concrete.

Published in:

Frontiers in Built Environment, 2024, p. 1, doi. 10.3389/fbuil.2024.1445954

By:

Udhaya Kumar, T.;
Vinod Kumar, M.;
Salunkhe, Sachin;
Cep, Robert;
Abouel Nasr, Emad

Publication type:

Article

Meta-Heuristic Technique-Based Parametric Optimization for Electrochemical Machining of Monel 400 Alloys to Investigate the Material Removal Rate and the Sludge.

Published in:

Applied Sciences (2076-3417), 2022, v. 12, n. 6, p. 2793, doi. 10.3390/app12062793

By:

Nagarajan, Vengatajalapathi;
Solaiyappan, Ayyappan;
Mahalingam, Siva Kumar;
Nagarajan, Lenin;
Salunkhe, Sachin;
Nasr, Emad Abouel;
Shanmugam, Ragavanantham;
Hussein, Hussein Mohammed Abdel Moneam

Publication type:

Article

Computer-Aided Design of Traditional Jigs and Fixtures.

Published in:

Applied Sciences (2076-3417), 2022, v. 12, n. 1, p. 3, doi. 10.3390/app12010003

By:

Ibrahim, Abdullah D.;
Hussein, Hussein M. A.;
Ahmed, Ibrahim;
Nasr, Emad Abouel;
Kamrani, Ali;
Abdelwahab, Sabreen A.

Publication type:

Article

Optimization of Process Parameters for Turning Hastelloy X under Different Machining Environments Using Evolutionary Algorithms: A Comparative Study.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 20, p. 9725, doi. 10.3390/app11209725

By:

Sivalingam, Vinothkumar;
Sun, Jie;
Mahalingam, Siva Kumar;
Nagarajan, Lenin;
Natarajan, Yuvaraj;
Salunkhe, Sachin;
Nasr, Emad Abouel;
Davim, J. Paulo;
Hussein, Hussein Mohammed Abdel Moneam

Publication type:

Article

Harmony Search Algorithm for Minimizing Assembly Variation in Non-linear Assembly.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 19, p. 9213, doi. 10.3390/app11199213

By:

Mahalingam, Siva Kumar;
Nagarajan, Lenin;
Salunkhe, Sachin;
Nasr, Emad Abouel;
Davim, Jõao Paulo;
Hussein, Hussein M. A.

Publication type:

Article

A Novel Methodology for Simultaneous Minimization of Manufacturing Objectives in Tolerance Allocation of Complex Assembly.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 19, p. 9164, doi. 10.3390/app11199164

By:

Nagarajan, Lenin;
Mahalingam, Siva Kumar;
Salunkhe, Sachin;
Nasr, Emad Abouel;
Davim, Jõao Paulo;
Hussein, Hussein M. A.

Publication type:

Article

Rotary Ultrasonic Machining of Alumina Ceramic: An Experimental Investigation of Tool Path and Tool Overlapping.

Published in:

Applied Sciences (2076-3417), 2020, v. 10, n. 5, p. 1667, doi. 10.3390/app10051667

By:

Abdo, Basem M. A.;
El-Tamimi, Abdualziz;
Nasr, Emad Abouel

Publication type:

Article

Effect of MMT‐HNT Hybrid Nanoclay on Properties of UHMWPE Composite.

Published in:

International Journal of Polymer Science, 2024, v. 2024, p. 1, doi. 10.1155/2024/9141155

By:

Hasan, Rania;
Pande, Sarang;
Bhalerao, Pravin;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel;
Mousa, Hamouda M

Publication type:

Article

Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing.

Published in:

Metals (2075-4701), 2018, v. 8, n. 8, p. 568, doi. 10.3390/met8080568

By:

Gangil, Namrata;
Maheshwari, Sachin;
Nasr, Emad Abouel;
El-Tamimi, Abdulaziz M.;
El-Meligy, Mohammed A.;
Siddiquee, Arshad Noor

Publication type:

Article

Modeling and performance analysis of a closed-loop supply chain using first-order hybrid Petri nets.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2016, v. 8, n. 5, p. 1, doi. 10.1177/1687814016649584

By:

Outmal, Imane;
Kamrani, Ali;
Abouel Nasr, Emad S.;
Alkahtani, Mohammed

Publication type:

Article

Computer-aided design and simulation of strip layout for progressive die planning using Petri nets.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2016, v. 8, n. 4, p. 1, doi. 10.1177/1687814016644385

By:

Hussein, Hussein Mohamed A.;
Kumar, Shailendra;
Nasr, Emad S. Abouel

Publication type:

Article

Multi-objective optimization of wear parameters of hybrid composites (LM6/B<sub>4</sub>C/fly ash) using grey relational analysis.

Published in:

PLoS ONE, 2025, v. 20, n. 6, p. 1, doi. 10.1371/journal.pone.0326086

By:

Rubi, Charles Sarala;
Prakash, Jayavelu Udaya;
Juliyana, Sunder Jebarose;
Salunkhe, Sachin;
Cep, Robert;
Nasr, Emad Abouel

Publication type:

Article

Supervised Machine Learning and Physics Machine Learning approach for prediction of peak temperature distribution in Additive Friction Stir Deposition of Aluminium Alloy.

Published in:

PLoS ONE, 2025, v. 20, n. 4, p. 1, doi. 10.1371/journal.pone.0309751

By:

Mishra, Akshansh;
Jatt, Vijaykumar;
Sefene, Eyob Messele;
Salunkhe, Sachin;
Cep, Robert;
Abouel Nasr, Emad

Publication type:

Article