Found: 60
Select item for more details and to access through your institution.
THE PROPERTIES OF REGENERATIVE POLYMER MASS.
- Published in:
- Advances in Science & Technology Research Journal, 2017, p. 130, doi. 10.12913/22998624/71149
- By:
- Publication type:
- Article
THE EFFECT OF DEGREASING ON ADHESIVE JOINT STRENGTH.
- Published in:
- Advances in Science & Technology Research Journal, 2017, v. 11, n. 1, p. 75, doi. 10.12913/22998624/66500
- By:
- Publication type:
- Article
ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES.
- Published in:
- Advances in Science & Technology Research Journal, 2016, v. 10, n. 31, p. 87, doi. 10.12913/22998624/64065
- By:
- Publication type:
- Article
Bio-Pellet Fuel from Oil Palm Empty Fruit Bunches (EFB): Using European Standards for Quality Testing.
- Published in:
- Sustainability (2071-1050), 2018, v. 10, n. 12, p. 4443, doi. 10.3390/su10124443
- By:
- Publication type:
- Article
Musa textilis Cellulose Fibres in Biocomposites -- An Investigation of Mechanical Properties and Microstructure.
- Published in:
- BioResources, 2018, v. 13, n. 2, p. 3177, doi. 10.15376/biores.13.2.3177-3194
- By:
- Publication type:
- Article
Influence of Plasma Treatment on Mechanical Properties of Cellulose-based Fibres and Their Interfacial Interaction in Composite Systems.
- Published in:
- BioResources, 2017, v. 12, n. 3, p. 5449, doi. 10.15376/biores.12.3.5449-5461
- By:
- Publication type:
- Article
Strength Characteristics of Untreated Short-fibre Composites from the Plant Ensete ventricosum.
- Published in:
- BioResources, 2017, v. 12, n. 1, p. 255, doi. 10.15376/biores.12.1.255-269
- By:
- Publication type:
- Article
Reliability and risk treatment centered maintenance.
- Published in:
- Journal of Mechanical Science & Technology, 2014, v. 28, n. 10, p. 3963, doi. 10.1007/s12206-014-0907-7
- By:
- Publication type:
- Article
Analysis of the physical-mechanical properties of a pelleted chicken litter organic fertiliser.
- Published in:
- Research in Agricultural Engineering, 2020, v. 66, n. 4, p. 131, doi. 10.17221/41/2020-RAE
- By:
- Publication type:
- Article
Research on wear resistance of poly-component composite materials.
- Published in:
- Research in Agricultural Engineering, 2017, v. 63, n. 3, p. 106, doi. 10.17221/79/2015-RAE
- By:
- Publication type:
- Article
Evaluation of properties of elastomer seal for fuel systems exposed to effects of rapeseed methyl ester.
- Published in:
- Research in Agricultural Engineering, 2017, v. 63, n. 3, p. 115, doi. 10.17221/55/2016-RAE
- By:
- Publication type:
- Article
Analysis of production parameters of single-lap bonds adhesive bonded with composites based on aluminium filler.
- Published in:
- Research in Agricultural Engineering, 2017, v. 63, n. 1, p. 36, doi. 10.17221/82/2015-RAE
- By:
- Publication type:
- Article
EFFECT OF SALINE ENVIRONMENT ON MECHANICAL PROPERTIES OF STRUCTURAL ADHESIVE BONDS.
- Published in:
- Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2016, v. 64, n. 5, p. 1609, doi. 10.11118/actaun201664051609
- By:
- Publication type:
- Article
Effect of internal mold release agent on flexural and inter laminar shear properties of carbon and glass fabric reinforced thermoset composites.
- Published in:
- Polymers for Advanced Technologies, 2021, v. 32, n. 1, p. 282, doi. 10.1002/pat.5084
- By:
- Publication type:
- Article
Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 3, p. 1224, doi. 10.3390/ma16031224
- By:
- Publication type:
- Article
Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 3, p. 874, doi. 10.3390/ma15030874
- By:
- Publication type:
- Article
Effect of Waterjet Machining Parameters on the Cut Quality of PP and PVC-U Materials Coated with Polyurethane and Acrylate Coatings.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 24, p. 7542, doi. 10.3390/ma14247542
- By:
- Publication type:
- Article
Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 10, p. 2636, doi. 10.3390/ma14102636
- By:
- Publication type:
- Article
The Influence of Mixing Methods of Epoxy Composition Ingredients on Selected Mechanical Properties of Modified Epoxy Construction Materials.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 2, p. 411, doi. 10.3390/ma14020411
- By:
- Publication type:
- Article
The Influence of Modification with Natural Fillers on the Mechanical Properties of Epoxy Adhesive Compositions after Storage Time.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 2, p. 291, doi. 10.3390/ma13020291
- By:
- Publication type:
- Article
Hodnocení mechanických vlastností elastomerního těsnění pro palivové soustavy vystavené vlivu biopaliv.
- Published in:
- Listy Cukrovarnicke a Reparske, 2016, v. 132, n. 11, p. 350
- By:
- Publication type:
- Article
Aplikace návarového materiálu na nástroje zpracovávající pědu za účelem zvýšení jejich odolnosti věči abrazivnímu opotŏebení.
- Published in:
- Listy Cukrovarnicke a Reparske, 2015, v. 131, n. 9/10, p. 279
- By:
- Publication type:
- Article
Aplikace otĕruvzdorných polymerních částicových kompozitů v oblasti konstrukce orebního tĕlesa.
- Published in:
- Listy Cukrovarnicke a Reparske, 2014, v. 130, n. 9/10, p. 284
- By:
- Publication type:
- Article
Inovace materiálovĕ konstrukčních řešení plužní čepele v oblasti konvenčního zpracování půdy při pĕstování cukrové řepy.
- Published in:
- Listy Cukrovarnicke a Reparske, 2014, v. 130, n. 3, p. 94
- By:
- Publication type:
- Article
Aplikace návaru a kompozitu v oblasti technologie pestování a sklizne cukrové repy.
- Published in:
- Listy Cukrovarnicke a Reparske, 2011, v. 127, n. 9/10, p. 304
- By:
- Publication type:
- Article
MATERIAL UTILIZATION OF WASTE ORIGINATING DURING PROCESSING OF PLANT JATROPHA CURCAS L. IN BIOCOMPOSITES - ADHESIVE-COHESIVE CHARACTERISTICS AND WEAR.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2016, v. 23, n. 5, p. 1411, doi. 10.17559/TV-20150430095442
- By:
- Publication type:
- Article
RECYCLING OF CORUNDUM PARTICLES - TWO-BODY ABRASIVE WEAR OF POLYMERIC COMPOSITES BASED ON WASTE.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2015, v. 22, n. 3, p. 567, doi. 10.17559/TV-20131111140048
- By:
- Publication type:
- Article
ABRASIVE WEAR IN THREE-PHASE WASTE-BASED POLYMERIC PARTICLE COMPOSITES.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2015, v. 22, n. 2, p. 257, doi. 10.17559/TV-20130905190904
- By:
- Publication type:
- Article
UNUSUAL POSSIBILITY OF WEAR RESISTANCE INCREASE RESEARCH IN THE SPHERE OF SOIL CULTIVATION.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2013, v. 20, n. 4, p. 641
- By:
- Publication type:
- Article
DEGRADATION LIMITS OF BONDING TECHNOLOGY DEPENDING ON DESTINATIONS EUROPE AND INDONESIA.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2013, v. 20, n. 4, p. 571
- By:
- Publication type:
- Article
Author Correction: Optimization of seismic performance in waste fibre reinforced concrete by TOPSIS method.
- Published in:
- 2023
- By:
- Publication type:
- Correction Notice
Optimization of seismic performance in waste fibre reinforced concrete by TOPSIS method.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-35495-9
- By:
- Publication type:
- Article
Optimization of seismic performance in waste fibre reinforced concrete by TOPSIS method.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-35495-9
- By:
- Publication type:
- Article
Treatment of Vulvovaginal Laxity by Electroporation: The Jett Plasma Medical for Her II Study.
- Published in:
- Journal of Clinical Medicine, 2023, v. 12, n. 19, p. 6234, doi. 10.3390/jcm12196234
- By:
- Publication type:
- Article
Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance.
- Published in:
- Polymers (20734360), 2023, v. 15, n. 7, p. 1744, doi. 10.3390/polym15071744
- By:
- Publication type:
- Article
Mechanical and Thermo-Mechanical Performance of Natural Fiber-Based Single-Ply and 2-Ply Woven Prepregs.
- Published in:
- Polymers (20734360), 2023, v. 15, n. 4, p. 994, doi. 10.3390/polym15040994
- By:
- Publication type:
- Article
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading.
- Published in:
- Polymers (20734360), 2023, v. 15, n. 2, p. 395, doi. 10.3390/polym15020395
- By:
- Publication type:
- Article
Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 4930, doi. 10.3390/polym14224930
- By:
- Publication type:
- Article
Modeling and Simulation of Mechanical Performance in Textile Structural Concrete Composites Reinforced with Basalt Fibers.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 19, p. 4108, doi. 10.3390/polym14194108
- By:
- Publication type:
- Article
Research on the Material Compatibility of Elastomer Sealing O-Rings.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 16, p. 3323, doi. 10.3390/polym14163323
- By:
- Publication type:
- Article
Research on Low-Cycle Fatigue Engineered Hybrid Sandwich Ski Construction.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 11, p. 2278, doi. 10.3390/polym14112278
- By:
- Publication type:
- Article
Exploration of Effects of Graduated Compression Stocking Structures on Performance Properties Using Principal Component Analysis: A Promising Method for Simultaneous Optimization of Properties.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 10, p. 2045, doi. 10.3390/polym14102045
- By:
- Publication type:
- Article
Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 7, p. 1301, doi. 10.3390/polym14071301
- By:
- Publication type:
- Article
Service Life of Adhesive Bonds under Cyclic Loading with a Filler Based on Natural Waste from Coconut Oil Production.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 5, p. N.PAG, doi. 10.3390/polym14051033
- By:
- Publication type:
- Article
Design, Development, and Characterization of Advanced Textile Structural Hollow Composites.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 20, p. 3535, doi. 10.3390/polym13203535
- By:
- Publication type:
- Article
Experimental Investigation of Wavy-Lap Bonds with Natural Cotton Fabric Reinforcement under Cyclic Loading.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 17, p. 2872, doi. 10.3390/polym13172872
- By:
- Publication type:
- Article
Mechanical Performance of Knitted Hollow Composites from Recycled Cotton and Glass Fibers for Packaging Applications.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 14, p. 2381, doi. 10.3390/polym13142381
- By:
- Publication type:
- Article
Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural Applications.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 14, p. 2291, doi. 10.3390/polym13142291
- By:
- Publication type:
- Article
Axial and Radial Compression Behavior of Composite Rocket Launcher Developed by Robotized Filament Winding: Simulation and Experimental Validation.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 4, p. 517, doi. 10.3390/polym13040517
- By:
- Publication type:
- Article
Quasi-Static Shear Test of Hybrid Adhesive Bonds Based on Treated Cotton-Epoxy Resin Layer.
- Published in:
- Polymers (20734360), 2020, v. 12, n. 12, p. 2945, doi. 10.3390/polym12122945
- By:
- Publication type:
- Article