Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2015, v. 38, n. 5, p. 503, doi. 10.1111/ffe.12272
- By:
- Publication type:
- Article
Works by Lazzarin, P.
Results: 49
1
2
Three-dimensional stress fields due to notches in plates under linear elastic and elastic-plastic conditions.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2015, v. 38, n. 2, p. 140, doi. 10.1111/ffe.12138
- By:
- Publication type:
- Article
3
Editorial foreword: Special issue ICEAF III 3rd International Conference of Engineering Against Failure.
- Published in:
- 2014
- By:
- Publication type:
- Editorial
4
Some remarks on the Neuber rule applied to a control volume surrounding sharp and blunt notch tips.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2014, v. 37, n. 4, p. 349, doi. 10.1111/ffe.12124
- By:
- Publication type:
- Article
5
Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2013, v. 36, n. 9, p. 942, doi. 10.1111/ffe.12057
- By:
- Publication type:
- Article
6
A three-dimensional stress field solution for pointed and sharply radiused V-notches in plates of finite thickness.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2012, v. 35, n. 12, p. 1105, doi. 10.1111/j.1460-2695.2012.01698.x
- By:
- Publication type:
- Article
7
Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2012, v. 35, n. 6, p. 538, doi. 10.1111/j.1460-2695.2011.01647.x
- By:
- Publication type:
- Article
8
Multiaxial fatigue of V-notched steel specimens: a non-conventional application of the local energy method.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2011, v. 34, n. 11, p. 921, doi. 10.1111/j.1460-2695.2011.01585.x
- By:
- Publication type:
- Article
9
Out-of-plane singular stress fields in V-notched plates and welded lap joints induced by in-plane shear load conditions.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2011, v. 34, n. 4, p. 291, doi. 10.1111/j.1460-2695.2010.01518.x
- By:
- Publication type:
- Article
10
Fatigue-relevant stress field parameters of welded lap joints: pointed slit tip compared with keyhole notch.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2009, v. 32, n. 9, p. 713, doi. 10.1111/j.1460-2695.2009.01379.x
- By:
- Publication type:
- Article
11
Brittle failures from U- and V-notches in mode I and mixed, I + II, mode: a synthesis based on the strain energy density averaged on finite-size volumes.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2009, v. 32, n. 8, p. 671, doi. 10.1111/j.1460-2695.2009.01373.x
- By:
- Publication type:
- Article
12
Control volumes and strain energy density under small and large scale yielding due to tension and torsion loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2008, v. 31, n. 1, p. 95, doi. 10.1111/j.1460-2695.2007.01206.x
- By:
- Publication type:
- Article
13
Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2007, v. 30, n. 2, p. 95, doi. 10.1111/j.1460-2695.2006.01084.x
- By:
- Publication type:
- Article
14
Generalized stress intensity factors due to steady and transient thermal loads with applications to welded joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2006, v. 29, n. 6, p. 440, doi. 10.1111/j.1460-2695.2006.01015.x
- By:
- Publication type:
- Article
15
A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube-to-flange joints subjected to combined loadings.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2004, v. 27, n. 2, p. 127, doi. 10.1111/j.1460-2695.2004.00733.x
- By:
- Publication type:
- Article
16
A stress-based method to predict lifetime under multiaxial fatigue loadings.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2003, v. 26, n. 12, p. 1171, doi. 10.1046/j.1460-2695.2003.00723.x
- By:
- Publication type:
- Article
17
Fracture mechanics and notch sensitivity.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2003, v. 26, n. 3, p. 257, doi. 10.1046/j.1460-2695.2003.00633.x
- By:
- Publication type:
- Article
18
A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2003, v. 26, n. 1, p. 49, doi. 10.1046/j.1460-2695.2003.00586.x
- By:
- Publication type:
- Article
19
The Equivalent Strain Energy Density approach re-formulated and applied to sharp V-shaped notches under localized and generalized plasticity.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2002, v. 25, n. 10, p. 917, doi. 10.1046/j.1460-2695.2002.00543.x
- By:
- Publication type:
- Article
20
A bi-parametric Wöhler curve for high cycle multiaxial fatigue assessment.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2002, v. 25, n. 1, p. 63, doi. 10.1046/j.1460-2695.2002.00462.x
- By:
- Publication type:
- Article
21
From a loca stress approach to fracture mechanics: a comprehensive evaluation of the fatigue strength of welded joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 1999, v. 22, n. 5, p. 369, doi. 10.1046/j.1460-2695.1999.00179.x
- By:
- Publication type:
- Article
22
Fatigue testing of welded joints by means of local criteria: a comparison between the fictitious notch radius-based criterion and the criterion involving strain energy density in a finite volume.
- Published in:
- Welding International, 2008, v. 22, n. 9, p. 635, doi. 10.1080/09507110802413449
- By:
- Publication type:
- Article
23
Fatigue behaviour of welded structures in naval constructions.
- Published in:
- Welding International, 2004, v. 18, n. 12, p. 956, doi. 10.1533/wint.2004.3352
- By:
- Publication type:
- Article
24
A study of fatigue resistance in joints welded in steel and light alloy according to deformation energy at the weld toes and roots.
- Published in:
- Welding International, 2004, v. 18, n. 9, p. 709, doi. 10.1533/wint.2004.3322
- By:
- Publication type:
- Article
25
Eosinophilic granuloma and necrotizing vasculitis (Churg-Strauss syndrome?) involving a parotid gland, lymph nodes, liver and spleen.
- Published in:
- 1989
- By:
- Publication type:
- journal article
26
On the second non-singular stress term of the V-notch solution: a new engineering solution.
- Published in:
- International Journal of Fracture, 2013, v. 181, n. 1, p. 83, doi. 10.1007/s10704-013-9822-7
- By:
- Publication type:
- Article
27
On Scale Effect in Plates Weakened by Rounded V-Notches and Subjected to In-Plane Shear Loading.
- Published in:
- International Journal of Fracture, 2013, v. 180, n. 1, p. 111, doi. 10.1007/s10704-012-9796-x
- By:
- Publication type:
- Article
28
Simple New Expressions for the Notch Stress Intensity Factors in an Array of Narrow V-Notches Under Tension.
- Published in:
- International Journal of Fracture, 2012, v. 176, n. 2, p. 237, doi. 10.1007/s10704-012-9737-8
- By:
- Publication type:
- Article
29
Generalised stress intensity factors for rounded notches in plates under in-plane shear loading.
- Published in:
- International Journal of Fracture, 2011, v. 170, n. 2, p. 123, doi. 10.1007/s10704-011-9613-y
- By:
- Publication type:
- Article
30
On Higher Order Terms in the Crack Tip Stress Field.
- Published in:
- International Journal of Fracture, 2010, v. 161, n. 2, p. 221, doi. 10.1007/s10704-010-9443-3
- By:
- Publication type:
- Article
31
Fracture of V-notched specimens under mixed mode (I + II) loading in brittle materials.
- Published in:
- International Journal of Fracture, 2009, v. 159, n. 2, p. 121, doi. 10.1007/s10704-009-9387-7
- By:
- Publication type:
- Article
32
Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading.
- Published in:
- International Journal of Fracture, 2008, v. 152, n. 1, p. 1, doi. 10.1007/s10704-008-9260-0
- By:
- Publication type:
- Article
33
Fracture assessment of U-notches under mixed mode loading: two procedures based on the ‘equivalent local mode I’ concept.
- Published in:
- International Journal of Fracture, 2007, v. 148, n. 4, p. 415, doi. 10.1007/s10704-008-9213-7
- By:
- Publication type:
- Article
34
Analytical study of the elastic–plastic stress fields ahead of parabolic notches under antiplane shear loading.
- Published in:
- International Journal of Fracture, 2007, v. 148, n. 2, p. 139, doi. 10.1007/s10704-008-9185-7
- By:
- Publication type:
- Article
35
J-integral evaluation for U- and V-blunt notches under Mode I loading and materials obeying a power hardening law.
- Published in:
- International Journal of Fracture, 2007, v. 146, n. 1/2, p. 33, doi. 10.1007/s10704-007-9134-x
- By:
- Publication type:
- Article
36
Local strain energy to assess the static failure of U-notches in plates under mixed mode loading.
- Published in:
- International Journal of Fracture, 2007, v. 145, n. 1, p. 29, doi. 10.1007/s10704-007-9104-3
- By:
- Publication type:
- Article
37
Recent developments in multi-parametric three-dimensional stress field representation in plates weakened by cracks and notches.
- Published in:
- Fracture & Structural Integrity, 2013, n. 25, p. 61, doi. 10.3221/IGF-ESIS.25.10
- By:
- Publication type:
- Article
38
Welded joints: Limits on criteria for plasticity zones located at weld toes.
- Published in:
- Welding International, 2000, v. 14, n. 10, p. 806, doi. 10.1080/09507110009549272
- By:
- Publication type:
- Article
39
The influence of bending on stress fields and fatigue strength of cruciform welds.
- Published in:
- Welding International, 2000, v. 14, n. 2, p. 115, doi. 10.1080/09507110009549149
- By:
- Publication type:
- Article
40
Fatigue behaviour of laser and resistance seam welds in the automotive industry.
- Published in:
- Welding International, 1995, v. 9, n. 1, p. 19, doi. 10.1080/09507119509548746
- By:
- Publication type:
- Article
41
Fatigue strength of laser-welded raised edge joints between steel sheets.
- Published in:
- Welding International, 1990, v. 4, n. 10, p. 781, doi. 10.1080/09507119009452180
- By:
- Publication type:
- Article
42
Effect of spot weld distribution characteristics on the fatigue strength of resistance welded joints.
- Published in:
- Welding International, 1988, v. 2, n. 8, p. 707, doi. 10.1080/09507118809447554
- By:
- Publication type:
- Article
43
Fatigue behaviour of bonded anchors subjected to tensile loads.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2010, v. 41, n. 5, p. 372, doi. 10.1002/mawe.201000611
- By:
- Publication type:
- Article
44
Some Expressions for the Strain Energy in a Finite Volume Surrounding the Root of Blunt V-notches.
- Published in:
- International Journal of Fracture, 2005, v. 135, n. 1-4, p. 161, doi. 10.1007/s10704-005-3943-6
- By:
- Publication type:
- Article
45
From Neuber’s Elementary Volume to Kitagawa and Atzori’s Diagrams: An Interpretation Based on Local Energy.
- Published in:
- International Journal of Fracture, 2005, v. 135, n. 1-4, p. L33, doi. 10.1007/s10704-005-4393-x
- By:
- Publication type:
- Article
46
Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values.
- Published in:
- International Journal of Fracture, 2005, v. 133, n. 3, p. 247, doi. 10.1007/s10704-005-4043-3
- By:
- Publication type:
- Article
47
A unified treatment of the mode I fatigue limit of components containing notches or defects.
- Published in:
- International Journal of Fracture, 2005, v. 133, n. 1, p. 61, doi. 10.1007/s10704-005-2183-0
- By:
- Publication type:
- Article
48
A three-dimensional graphical aid to analyze fatigue crack nucleation and propagation phases under fatigue limit conditions.
- Published in:
- International Journal of Fracture, 2002, v. 118, n. 3, p. 271, doi. 10.1023/A:1022965909483
- By:
- Publication type:
- Article
49
Parents spend an average of nine hours a day providing palliative care for children at home and need to maintain an average of five life-saving devices.
- Published in:
- 2018
- By:
- Publication type:
- journal article