Works by Khan, Aqib Mashood

Results: 66

Advancing the energy consumption prediction of the milling machine with small sample sets: a virtual sample generation approach with MC-PSO.

Published in:

Machining Science & Technology, 2025, v. 29, n. 4, p. 547, doi. 10.1080/10910344.2025.2494798

By:

Hu, Junjie;
Zhao, Wei;
Jamil, Muhammad;
Khan, Aqib Mashood;
Wang, Chao;
Zheng, Xiaowei

Publication type:

Article

A comprehensive evaluation of tool wear progression and built-up layer formation in sustainable dry machining of AZ61 magnesium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 7, p. 3021, doi. 10.1007/s00170-025-15607-7

By:

Alshibi, Assem;
Pervaiz, Salman;
Khan, Aqib Mashood;
Khan, Ahmar;
Jamil, Muhammad

Publication type:

Article

Holistic life cycle assessment of drilling Incoloy 825 utilizing versatile consumption of fluids: a sustainability perspective.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1093, doi. 10.1007/s00170-025-15590-z

By:

Hussain, Sadam;
Zhao, Guolong;
Khan, Aqib Mashood;
Khanna, Navneet;
Lotwala, Tarang;
Khan, Ahmar;
Jamil, Muhammad;
He, Ning

Publication type:

Article

Investigation on the chip formation of high-speed cutting in WC-15Co tungsten carbide with PCD tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2809, doi. 10.1007/s00170-025-15302-7

By:

Xin, Yun;
Kong, Feng;
Zhao, Wei;
Shi, Weiqi;
Khan, Aqib Mashood

Publication type:

Article

A novel empirical modeling approach for energy and resource efficiency in low carbon machining of Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 10, p. 4273, doi. 10.1007/s00170-025-15070-4

By:

Khan, Aqib Mashood;
Zhao, Wei;
Hu, Jue;
Merschroth, Holger;
He, Ning;
Jamil, Muhammad;
Iqbal, Asif

Publication type:

Article

Correction to: A state‑of‑the‑art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies.

Published in:

2025

By:

Jamil, Muhammad;
He, Ning;
Wei, Zhao;
Mushtaq, Ray Tahir;
Khan, Aqib Mashood;
Hegab, Hussien;
Gupta, Munish Kumar;
Khanna, Navneet

Publication type:

Correction Notice

Unraveling the influence of vibrations on material removal and surface quality in longitudinal ultrasonic vibration–assisted milling of Ti2AlNb intermetallic alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 5, p. 2507, doi. 10.1007/s00170-024-14985-8

By:

Khan, Ahmar;
He, Qingliao;
Wang, Xin;
Zhao, Biao;
Ding, Wenfeng;
Khan, Aqib Mashood;
Ali, Syed Hammad;
Hussain, Sadam

Publication type:

Article

Holistic review of drilling on CFRP composites: Techniques, FEM, sustainability, challenges, and advances.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2661, doi. 10.1007/s00170-024-14317-w

By:

Hamed, Muhammad;
Zhang, Chen;
Khan, Aqib Mashood;
Saleem, Muhammad;
Musanur, M. D.

Publication type:

Article

Investigations on pulsed and continuous supply of a cryogenic medium in milling of Waspaloy and Inconel 718 under various lubri-cooling environments.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3027, doi. 10.1007/s00170-024-13505-y

By:

Iqbal, Asif;
Saelzer, Jannis;
Ali, Kamran;
Biermann, Dirk;
Sicking, Martin;
Bakar, Muhammad S. Abu;
Khan, Aqib Mashood;
Nauman, Malik M.

Publication type:

Article

A state-of-the-art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 4377, doi. 10.1007/s00170-024-13303-6

By:

Jamil, Muhammad;
He, Ning;
Wei, Zhao;
Mushtaq, Ray Tahir;
Khan, Aqib Mashood;
Hegab, Hussien;
Gupta, Munish Kumar;
Khanna, Navneet

Publication type:

Article

Retraction Note: Bioactivity measurement of commercially pure titanium processed by micro-electric discharge drilling.

Published in:

2023

By:

Ahuja, Neeraj;
Sharma, Neeraj;
Hegab, Hussien;
Khanna, Rajesh;
Khan, Aqib Mashood

Publication type:

Correction Notice

A critical review on tool wear mechanism and surface integrity aspects of SiCp/Al MMCs during turning: prospects and challenges.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 2825, doi. 10.1007/s00170-023-11178-7

By:

Laghari, Rashid Ali;
Jamil, Muhammad;
Laghari, Asif Ali;
Khan, Aqib Mashood;
Akhtar, Syed Sohail;
Mekid, Samir

Publication type:

Article

Application of sophisticated sensors to advance the monitoring of machining processes: analysis and holistic review.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 3/4, p. 989, doi. 10.1007/s00170-022-10771-6

By:

Kandavalli, Sumanth Ratna;
Khan, Aqib Mashood;
Iqbal, Asif;
Jamil, Muhammad;
Abbas, Saqlain;
Laghari, Rashid Ali;
Cheok, Quentin

Publication type:

Article

Surface generation on titanium alloy through powder-mixed electric discharge machining with the focus on bioimplant applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 3/4, p. 1395, doi. 10.1007/s00170-022-09927-1

By:

Farooq, Muhammad Umar;
Bhatti, Haider Ali;
Asad, Muhammad;
Kumar, M. Saravana;
Zahoor, Sadaf;
Khan, Aqib Mashood

Publication type:

Article

Holistic 3D simulations and experimental investigation of surface quality and residual stresses in shot peening.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 1027, doi. 10.1007/s00170-022-09273-2

By:

Meng, Longhui;
Shan, Yicai;
Khan, Aqib Mashood;
Jamil, Muhammad;
He, Ning

Publication type:

Article

Comparison of machinability and economic aspects in turning of Haynes-25 alloy under novel hybrid cryogenic-LN oils-on-water approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 1/2, p. 427, doi. 10.1007/s00170-022-08815-y

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Alfaify, Abdullah;
Jamil, Muhammad;
Sharma, Shubham;
Farooq, Muhammad Umar;
Khaliq, Waqas;
Iqbal, Asif

Publication type:

Article

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2127, doi. 10.1007/s00170-021-08279-6

By:

Jamil, Muhammad;
He, Ning;
Zhao, Wei;
Khan, Aqib Mashood;
Laghari, Rashid Ali

Publication type:

Article

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 729, doi. 10.1007/s00170-021-07785-x

By:

Gupta, Munish Kumar;
Khan, Aqib Mashood;
Song, Qinghua;
Liu, Zhanqiang;
Khalid, Qazi Salman;
Jamil, Muhammad;
Kuntoğlu, Mustafa;
Usca, Üsame Ali;
Sarıkaya, Murat;
Pimenov, Danil Yu

Publication type:

Article

Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review.

Published in:

Machining Science & Technology, 2024, v. 28, n. 3, p. 323, doi. 10.1080/10910344.2024.2324828

By:

Khan, Muhammad Ahmed;
Wang, Bing;
Khan, Aqib Mashood;
Liu, Zhanqiang;
Cai, Yukui;
Song, Qinghua

Publication type:

Article

Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing.

Published in:

Machining Science & Technology, 2019, v. 23, n. 6, p. 1022, doi. 10.1080/10910344.2019.1652312

By:

Jamil, Muhammad;
Khan, Aqib Mashood;
He, Ning;
Li, Liang;
Iqbal, Asif;
Mia, Mozammel

Publication type:

Article

Correction to: Holistic sustainability assessment of hybrid Al-GnP enriched nanofluids and textured-tool in machining of Ti-6Al-4V alloy.

Published in:

2021

By:

Khan, Aqib Mashood;
Hussain, Ghulam;
Alkahtani, Mohammed;
Alzabidi, Ayoub;
Abidi, Mustufa Haider;
He, Ning

Publication type:

Correction Notice

Holistic sustainability assessment of hybrid Al–GnP-enriched nanofluids and textured tool in machining of Ti–6Al–4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 3/4, p. 731, doi. 10.1007/s00170-020-06371-x

By:

Khan, Aqib Mashood;
Hussain, Ghulam;
Alkahtani, Mohammed;
Alzabidi, Ayoub;
Abidi, Mustufa Haider;
He, Ning

Publication type:

Article

Progress for sustainability in the mist assisted cooling techniques: a critical review.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 1/2, p. 345, doi. 10.1007/s00170-020-05529-x

By:

Singh, Gurraj;
Gupta, Munish Kumar;
Hegab, Hussein;
Khan, Aqib Mashood;
Song, Qinghua;
Liu, Zhanqiang;
Mia, Mozammel;
Jamil, Muhammed;
Sharma, Vishal S.;
Sarikaya, Murat;
Pruncu, Catalin Iulian

Publication type:

Article

Machinability investigations of hardened steel with biodegradable oil-based MQL spray system.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 108, n. 3, p. 735, doi. 10.1007/s00170-020-05477-6

By:

Gupta, Munish Kumar;
Mia, Mozammel;
Jamil, Muhammad;
Singh, Rupinder;
Singla, Anil Kumar;
Song, Qinghua;
Liu, Zhanqiang;
Khan, Aqib Mashood;
Rahman, M. Azizur;
Sarikaya, Murat

Publication type:

Article

Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 9/10, p. 4141, doi. 10.1007/s00170-020-05296-9

By:

Jamil, Muhammad;
Khan, Aqib Mashood;
Hegab, Hussien;
Gupta, Munish Kumar;
Mia, Mozammel;
He, Ning;
Zhao, Guolong;
Song, Qinghua;
Liu, Zhanqiang

Publication type:

Article

Bioactivity measurement of commercially pure titanium processed by micro-electric discharge drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 5/6, p. 2797, doi. 10.1007/s00170-020-05224-x

By:

Ahuja, Neeraj;
Sharma, Neeraj;
Hegab, Hussien;
Khanna, Rajesh;
Khan, Aqib Mashood

Publication type:

Article

Research on surface residual stresses generated by milling Ti6Al4V alloy under different pre-stresses.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 5/6, p. 2597, doi. 10.1007/s00170-020-05165-5

By:

Meng, Longhui;
Khan, Aqib Mashood;
Zhang, Hao;
Fang, Chenggang;
He, Ning

Publication type:

Article

A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 5/6, p. 2057, doi. 10.1007/s00170-019-04382-x

By:

Said, Zafar;
Gupta, Munish;
Hegab, Hussien;
Arora, Neeti;
Khan, Aqib Mashood;
Jamil, Muhammad;
Bellos, Evangelos

Publication type:

Article

Experimental study on surface integrity in cryogenic milling of 35CrMnSiA high-strength steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 103, n. 1-4, p. 605, doi. 10.1007/s00170-019-03577-6

By:

Gong, Le;
Zhao, Wei;
Ren, Fei;
He, Ning;
Li, Liang;
Xu, Qing;
Khan, Aqib Mashood

Publication type:

Article

Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 102, n. 9-12, p. 3895, doi. 10.1007/s00170-019-03485-9

By:

Jamil, Muhammad;
Khan, Aqib Mashood;
Hegab, Hussien;
Gong, Le;
Mia, Mozammel;
Gupta, Munish K.;
He, Ning

Publication type:

Article

Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 9-12, p. 4021, doi. 10.1007/s00170-018-1890-4

By:

Zhao, Wei;
Gong, Le;
Ren, Fei;
Li, Liang;
Xu, Qing;
Khan, Aqib Mashood

Publication type:

Article

Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel.

Published in:

Metals (2075-4701), 2023, v. 13, n. 12, p. 1964, doi. 10.3390/met13121964

By:

Hassan, Abual;
Mushtaq, Ray Tahir;
Mashood Khan, Aqib;
Anwar, Saqib

Publication type:

Article

Modelling and Analysis of Surface Evolution on Turning of Hard-to-Cut CLARM 30NiCrMoV14 Steel Alloy.

Published in:

Metals (2075-4701), 2021, v. 11, n. 11, p. 1751, doi. 10.3390/met11111751

By:

Raza, Syed Muhammad;
Khan, Aqib Mashood;
Farooq, Muhammad Umar;
Iqbal, Asif;
Pimenov, Danil Yurievich;
Giasin, Khaled;
Leksycki, Kamil

Publication type:

Article

Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN 2 -Assisted Sustainable Machining of Ti-6Al-4V Alloy.

Published in:

Metals (2075-4701), 2021, v. 11, n. 1, p. 88, doi. 10.3390/met11010088

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Jamil, Muhammad;
Nasr, Mustafa M.;
Gupta, Munish Kumar;
Saleh, Mustafa;
Ahmad, Shafiq;
Mia, Mozammel

Publication type:

Article

Sustainable Manufacturing and Parametric Analysis of Mild Steel Grade 60 by Deploying CNC Milling Machine and Taguchi Method.

Published in:

Metals (2075-4701), 2020, v. 10, n. 10, p. 1303, doi. 10.3390/met10101303

By:

Azim, Shakir;
Noor, Sahar;
Khalid, Qazi Salman;
Khan, Aqib Mashood;
Pimenov, Danil Yurievich;
Ahmad, Imran;
Babar, Abdur Rehman;
Pruncu, Catalin I.

Publication type:

Article

Multi-Objective Optimization of Energy Consumption and Surface Quality in Nanofluid SQCL Assisted Face Milling.

Published in:

Energies (19961073), 2019, v. 12, n. 4, p. 710, doi. 10.3390/en12040710

By:

Khan, Aqib Mashood;
Jamil, Muhammad;
Salonitis, Konstantinos;
Sarfraz, Shoaib;
Zhao, Wei;
He, Ning;
Mia, Mozammel;
Zhao, GuoLong

Publication type:

Article

Introducing new green machining technology to enhance process performance and reduce environmental pollution in the metal processing industry.

Published in:

Environmental Science & Pollution Research, 2023, v. 30, n. 51, p. 111552, doi. 10.1007/s11356-023-30238-9

By:

Wang, Pengwen;
Khan, Aqib Mashood;
Alkahtani, Mohammed;
Alasim, Fahad;
Jamil, Muhammad;
Hussain, Ghulam

Publication type:

Article

Introducing new green machining technology to enhance process performance and reduce environmental pollution in the metal processing industry.

Published in:

Environmental Science & Pollution Research, 2023, v. 30, n. 51, p. 111552, doi. 10.1007/s11356-023-30238-9

By:

Wang, Pengwen;
Khan, Aqib Mashood;
Alkahtani, Mohammed;
Alasim, Fahad;
Jamil, Muhammad;
Hussain, Ghulam

Publication type:

Article

Efficient Packing of 2D Irregular Parts: A Hybrid Approach Incorporating a Modified Genetic Algorithm and Image Processing.

Published in:

Mathematics (2227-7390), 2024, v. 12, n. 22, p. 3470, doi. 10.3390/math12223470

By:

Meng, Longhui;
Ding, Liang;
Mushtaq, Ray Tahir;
Anwar, Saqib;
Khan, Aqib Mashood

Publication type:

Article

Optimizing Two-Dimensional Irregular Pattern Packing with Advanced Overlap Optimization Techniques.

Published in:

Mathematics (2227-7390), 2024, v. 12, n. 17, p. 2670, doi. 10.3390/math12172670

By:

Meng, Longhui;
Ding, Liang;
Khan, Aqib Mashood;
Mushtaq, Ray Tahir;
Alkahtani, Mohammed

Publication type:

Article

Advancing PLA 3D Printing with Laser Polishing: Improving Mechanical Strength, Sustainability, and Surface Quality.

Published in:

Crystals (2073-4352), 2023, v. 13, n. 4, p. 626, doi. 10.3390/cryst13040626

By:

Mushtaq, Ray Tahir;
Iqbal, Asif;
Wang, Yanen;
Khan, Aqib Mashood;
Petra, Mohammad Iskandar

Publication type:

Article

An Ultrasonic-Based Detection of Air-Leakage for the Unclosed Components of Aircraft.

Published in:

Aerospace (MDPI Publishing), 2021, v. 8, n. 2, p. 55, doi. 10.3390/aerospace8020055

By:

Lyu, Yanlin;
Jamil, Muhammad;
Ma, Pengfei;
He, Ning;
Gupta, Munish Kumar;
Khan, Aqib Mashood;
Pimenov, Danil Yurievich;
Valvano, Stefano

Publication type:

Article

Application of TGRA-Based Optimisation for Machinability of High-Chromium Tool Steel in the EDM Process.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2020, v. 45, n. 7, p. 5555, doi. 10.1007/s13369-020-04456-z

By:

Nguyen, Phan Huu;
Banh, Tien Long;
Mashood, Khan Aqib;
Tran, Duc Quy;
Dong Pham, Van;
Muthuramalingam, T.;
Duc Nguyen, Van;
Nguyen, Duc Toan

Publication type:

Article

Machinability Investigation and Optimization of Process Parameters in Cryogenic Assisted Sustainable Turning of AISI-L6 Tool Steel.

Published in:

Transactions of Nanjing University of Aeronautics & Astronautics, 2020, v. 37, n. 3, p. 403, doi. 10.16356/j.1005-1120.2020.03.007

By:

JAMIL, Muhammad;
ul HAQ, Emran;
KHAN, Aqib Mashood;
GUPTA, Munish Kumar;
LI Liang;
SONG Qinghua

Publication type:

Article

Investigation on Machinability Characteristics of Inconel 718 Alloy in Cryogenic Machining Processes.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 2, p. 82, doi. 10.3390/lubricants11020082

By:

Gong, Le;
Su, Yu;
Liu, Yong;
Zhao, Wei;
Khan, Aqib Mashood;
Jamil, Muhammad

Publication type:

Article

Advancements in 3D-Printed Novel Nylon-6: A Taguchi Method for Surface Quality Sustainability and Mechanical Properties.

Published in:

Machines, 2023, v. 11, n. 9, p. 885, doi. 10.3390/machines11090885

By:

Mushtaq, Ray Tahir;
Alkahtani, Mohammed;
Khan, Aqib Mashood;
Abidi, Mustufa Haider

Publication type:

Article

A Study on Tantalum Alloying Layer and Its Performance on the Surface of 316LSS in Harsh Environments.

Published in:

Coatings (2079-6412), 2025, v. 15, n. 3, p. 313, doi. 10.3390/coatings15030313

By:

Li, Qinghua;
Fan, Zhehang;
Chen, Xiaohu;
Tao, Xiaoyong;
Ni, Ruian;
Zhang, Kai;
Khan, Aqib Mashood;
Raza, Syed Muhammad;
Wen, Yiming;
Wu, Hongyan

Publication type:

Article

Study on the Multi-Physical Field Simulation of the Double-Glow Plasma Alloying Process Parameters.

Published in:

Coatings (2079-6412), 2024, v. 14, n. 9, p. 1175, doi. 10.3390/coatings14091175

By:

Yu, Lu;
Wen, Yiming;
Zhou, Jindong;
Qiu, Yanzhao;
Yang, Danning;
Dai, Hao;
Zhu, Huilong;
Hu, Zhiyuan;
Liu, Gongtao;
Khan, Aqib Mashood;
Wu, Hongyan

Publication type:

Article

A COMPARATIVE STUDY OF FACE MILLING OF D2 STEEL USING AL2O3 BASED NANOFLUID MINIMUM QUANTITY LUBRICATION AND MINIMUM QUANTITY LUBRICATION.

Published in:

Advances in Science & Technology Research Journal, 2018, v. 12, n. 1, p. 99, doi. 10.12913/22998624/85629

By:

Ul Haq, Muhammad Ahsan;
Khan, Aqib Mashood;
Le Gong;
Tao Xu;
Longhui Meng;
Hussain, Salman

Publication type:

Article

Mathematical modeling of flexible printed circuit configuration: a study in deformation and optimization.

Published in:

Scientific Reports, 2024, v. 14, n. 1, p. 1, doi. 10.1038/s41598-024-64770-6

By:

Meng, Longhui;
Ding, Liang;
Khan, Aqib Mashood;
Alkahtani, Mohammed;
Shan, Yicai

Publication type:

Article