Found: 53
Select item for more details and to access through your institution.
Parametric Optimization of Powder-Mixed EDM of AA2014/Si 3 N 4 /Mg/Cenosphere Hybrid Composites Using Fuzzy Logic: Analysis of Mechanical, Machining, Microstructural, and Morphological Characterizations.
- Published in:
- Journal of Composites Science, 2023, v. 7, n. 9, p. 380, doi. 10.3390/jcs7090380
- By:
- Publication type:
- Article
Effect of Friction Stir Process Parameters on Mechanical Properties of Al/Eggshell/SiC Composite Material.
- Published in:
- Annales de Chimie Science des Matériaux, 2021, v. 45, n. 1, p. 51, doi. 10.18280/acsm.450107
- By:
- Publication type:
- Article
Effect of Multiple Passes on Microstructural and Mechanical Properties of Surface Composite Al 2024/SiC Produced by Friction Stir Processing.
- Published in:
- Annales de Chimie Science des Matériaux, 2020, v. 44, n. 6, p. 421, doi. 10.18280/acsm.440608
- By:
- Publication type:
- Article
Mechanical and Metallurgical Characterization of Copper-Based Welded Joint Using Brass as Filler Metal Developed by Microwave Technique.
- Published in:
- Annales de Chimie Science des Matériaux, 2020, v. 44, n. 4, p. 281, doi. 10.18280/acsm.440407
- By:
- Publication type:
- Article
Physical, Mechanical and Thermal Behaviour of High Entropy Materials.
- Published in:
- Annales de Chimie Science des Matériaux, 2020, v. 44, n. 2, p. 127, doi. 10.18280/acsm.440208
- By:
- Publication type:
- Article
Microstructure and Mechanical Properties of Al 6061/Al<sub>2</sub>O<sub>3</sub>/Fly-Ash Composite Fabricated Through Stir Casting.
- Published in:
- Annales de Chimie Science des Matériaux, 2019, v. 43, n. 5, p. 341, doi. 10.18280/acsm.430510
- By:
- Publication type:
- Article
Utilization of Waste Saw Dust from Wood Industry in Development of Glass Fiber Epoxy Resin Hybrid Green Composite Material.
- Published in:
- Annales de Chimie Science des Matériaux, 2019, v. 43, n. 4, p. 225, doi. 10.18280/acsm.430405
- By:
- Publication type:
- Article
Optimization of Laser Transmission Joining Process Parameters on Joint Strength of PET and 316 L Stainless Steel Joint Using Response Surface Methodology.
- Published in:
- Journal of Engineering (2314-4912), 2014, p. 1, doi. 10.1155/2014/197060
- By:
- Publication type:
- Article
Investigation of surface hardness, thermostability, tribo-corrosion, and microstructural morphological properties of microwave-synthesized high entropy alloy FeCoNiMnCu coating claddings on steel.
- Published in:
- Scientific Reports, 2024, v. 14, n. 1, p. 1, doi. 10.1038/s41598-024-55331-y
- By:
- Publication type:
- Article
Effects of SiC Particles Parameters on the Corrosion Protection of Aluminum-based Metal Matrix Composites using Response Surface Methodology.
- Published in:
- Jordan Journal of Mechanical & Industrial Engineering, 2018, v. 12, n. 4, p. 313
- By:
- Publication type:
- Article
Assessing the Applicability of Photocatalytic-Concrete Blocks in Reducing the Concentration of Ambient NO<sub>2</sub> of Chandigarh, India, Using Box–Behnken Response Surface Design Technique: A Holistic Sustainable Development Approach.
- Published in:
- Journal of Chemistry, 2021, p. 1, doi. 10.1155/2021/6468749
- By:
- Publication type:
- Article
STUDIES ON PHYSICAL, MICRO-STRUCTURAL, AND SLURRY EROSION BEHAVIOR OF COLD-SPRAYED Ni–20Cr+TiC+Re COATINGS ON SA516 STEEL FOR HIGH-TEMPERATURE APPLICATIONS.
- Published in:
- Surface Review & Letters, 2023, v. 30, n. 4, p. 1, doi. 10.1142/S0218625X2350021X
- By:
- Publication type:
- Article
Utilization of RHA in development of green composite material using RSM.
- Published in:
- Journal of the Mechanical Behavior of Materials, 2019, v. 28, n. 1, p. 20, doi. 10.1515/jmbm-2019-0004
- By:
- Publication type:
- Article
TRIBOLOLOGICAL BEHAVIOR OF A356/SiC METAL MATRIX COMPOSITE FABRICATED BY TWO DIFFERENT TECHNIQUES.
- Published in:
- i-Manager's Journal on Material Science, 2017, v. 5, n. 2, p. 19, doi. 10.26634/jms.5.2.13655
- By:
- Publication type:
- Article
CORROSION BEHAVIOR OF AA2014/SiC METAL MATRIX COMPOSITE FABRICATED BY STIR CASTING PROCESS.
- Published in:
- i-Manager's Journal on Material Science, 2016, v. 4, n. 3, p. 1, doi. 10.26634/jms.4.3.8240
- By:
- Publication type:
- Article
CORROSION BEHAVIOR OF AA2014/SiC METAL MATRIX COMPOSITE FABRICATED BY STIR CASTING PROCESS.
- Published in:
- i-Manager's Journal on Computer Science, 2016, v. 4, n. 4, p. 1
- By:
- Publication type:
- Article
Enhancing tribo-mechanical, microstructural morphology, and corrosion performance of AZ91D-magnesium composites through the synergistic reinforcements of silicon nitride and waste glass powder.
- Published in:
- Scientific Reports, 2024, v. 14, n. 1, p. 1, doi. 10.1038/s41598-024-52804-y
- By:
- Publication type:
- Article
EFFECTS OF PCD TOOL GEOMETRY ON SURFACE ROUGHNESS OF COMPOSITE IN TURNING OPERATION WITH MAXIMUM DESIRABILITY AND MINIMUM FLANK WEAR.
- Published in:
- i-Manager's Journal on Mechanical Engineering, 2017, v. 7, n. 2, p. 7, doi. 10.26634/jme.7.2.13431
- By:
- Publication type:
- Article
Investigation on mechanical properties and deformation behavior of copper-based three-phase metal matrix composite: Experimental and micro-macro-mechanical finite element analysis.
- Published in:
- Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design & Applications (Sage Publications, Ltd.), 2021, v. 235, n. 8, p. 1850, doi. 10.1177/14644207211009254
- By:
- Publication type:
- Article
Effect of zirconium diboride addition in zirconium dioxide reinforced aluminum-based composite fabricated by microwave sintering technique.
- Published in:
- Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 4, p. 1708, doi. 10.1177/09544089231164272
- By:
- Publication type:
- Article
Investigation on mechanical properties of ZTA+ Cr<sub>3</sub>C<sub>2</sub> + Ni reinforced EN31 steel-based composite material: Micromechanical finite-element analysis.
- Published in:
- Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2023, v. 237, n. 4, p. 1378, doi. 10.1177/09544089221113141
- By:
- Publication type:
- Article
A computational investigation on the influence of the l/d ratio and strain rate on the deformation behavior of rolled and homogeneous armor steel in the split Hopkinson pressure bar test process.
- Published in:
- Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2022, v. 236, n. 1, p. 138, doi. 10.1177/09544089211036531
- By:
- Publication type:
- Article
Utilization of waste spent alumina catalyst and agro-waste rice husk ash as reinforcement materials with scrap aluminium alloy wheel matrix.
- Published in:
- Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2020, v. 234, n. 6, p. 543, doi. 10.1177/0954408920930634
- By:
- Publication type:
- Article
Tribological behavior of a newly developed AA2014/waste eggshell/SiC hybrid green metal matrix composite at optimum parameters.
- Published in:
- Green Processing & Synthesis, 2018, v. 7, n. 1, p. 48, doi. 10.1515/gps-2016-0177
- By:
- Publication type:
- Article
Effects of waste eggshells and SiC addition in the synthesis of aluminum hybrid green metal matrix composite.
- Published in:
- Green Processing & Synthesis, 2017, v. 6, n. 1, p. 113, doi. 10.1515/gps-2016-0119
- By:
- Publication type:
- Article
Synthesis and mechanical behaviour of green metal matrix composites using waste eggshells as reinforcement material.
- Published in:
- Green Processing & Synthesis, 2016, v. 5, n. 3, p. 275, doi. 10.1515/gps-2016-0006
- By:
- Publication type:
- Article
Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 20, p. 3607, doi. 10.3390/polym13203607
- By:
- Publication type:
- Article
Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 19, p. 3260, doi. 10.3390/polym13193260
- By:
- Publication type:
- Article
Optimization of FFF Process Parameters by Naked Mole-Rat Algorithms with Enhanced Exploration and Exploitation Capabilities.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 11, p. 1702, doi. 10.3390/polym13111702
- By:
- Publication type:
- Article
Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm.
- Published in:
- Polymers (20734360), 2020, v. 12, n. 10, p. 2250, doi. 10.3390/polym12102250
- By:
- Publication type:
- Article
The Microstructure and Properties of Ni-Si-La 2 O 3 Coatings Deposited on 304 Stainless Steel by Microwave Cladding.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 6, p. 2209, doi. 10.3390/ma16062209
- By:
- Publication type:
- Article
Investigation on Carbonation and Permeability of Concrete with Rice Hush Ash and Shop Solution Addition.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 17, p. 6149, doi. 10.3390/ma15176149
- By:
- Publication type:
- Article
Effect of Ranque-Hilsch Vortex Tube Cooling to Enhance the Surface-Topography and Tool-Wear in Sustainable Turning of Al-5.6Zn-2.5Mg-1.6Cu-0.23Cr-T6 Aerospace Alloy.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 16, p. 5681, doi. 10.3390/ma15165681
- By:
- Publication type:
- Article
In Situ Micro-Observation of Surface Roughness and Fracture Mechanism in Metal Microforming of Thin Copper Sheets with Newly Developed Compact Testing Apparatus.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 4, p. 1368, doi. 10.3390/ma15041368
- By:
- Publication type:
- Article
Microstructural and Mechanical Properties of AZ31B/Graphene Nanocomposite Produced by Stir Casting.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2021, v. 31, n. 1, p. 51, doi. 10.18280/rcma.310107
- By:
- Publication type:
- Article
Surface Roughness Report and 3D Surface Analysis of Hybrid Metal Matrix Composites (MMC) During Abrasive Water Jet (AWJ) Cutting.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2020, v. 30, n. 3/4, p. 169, doi. 10.18280/rcma.303-407
- By:
- Publication type:
- Article
Microstructure and Mechanical Behaviour of Al/SiC/Agro-Waste RHA Hybrid Metal Matrix Composite.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2020, v. 30, n. 1, p. 43, doi. 10.18280/rcma.300107
- By:
- Publication type:
- Article
Effect of Uncarbonized Eggshell Weight Percentage on Mechanical Properties of Composite Material Developed by Electromagnetic Stir Casting Technique.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2019, v. 29, n. 2, p. 101, doi. 10.18280/rcma.290205
- By:
- Publication type:
- Article
Utilization of waste eggshell to reduce soil pollution in development of composite using central composite design.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2018, v. 28, n. 3, p. 421, doi. 10.3166/RCMA.28.421-438
- By:
- Publication type:
- Article
Management of Cattle Dung and Novel Bioelectricity Generation Using Microbial Fuel Cells: An Ingenious Experimental Approach.
- Published in:
- International Journal of Chemical Engineering (1687806X), 2021, p. 1, doi. 10.1155/2021/5536221
- By:
- Publication type:
- Article
Optimization of FDM Printing Process Parameters on Surface Finish, Thickness, and Outer Dimension with ABS Polymer Specimens Using Taguchi Orthogonal Array and Genetic Algorithms.
- Published in:
- Mathematical Problems in Engineering, 2022, p. 1, doi. 10.1155/2022/2698845
- By:
- Publication type:
- Article
Technical Risk Assessment for the Safe Design of a Man-Rider Chair Lift System.
- Published in:
- Machines, 2022, v. 10, n. 9, p. 769, doi. 10.3390/machines10090769
- By:
- Publication type:
- Article
Measurement of Form Errors and Comparative Cost Analysis for the Component Developed by Metal Printing (DMLS) and Stir Casting.
- Published in:
- Instrumentation, Mesures, Métrologies, 2020, v. 19, n. 5, p. 363, doi. 10.18280/i2m.190506
- By:
- Publication type:
- Article
A Comparative Numerical Analysis on the Effect of Welding Consumables on the Ballistic Resistance of SMAW Joints of Armor Steel.
- Published in:
- Applied Sciences (2076-3417), 2021, v. 11, n. 8, p. 3629, doi. 10.3390/app11083629
- By:
- Publication type:
- Article
Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy.
- Published in:
- International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1387, doi. 10.1007/s40962-023-01117-3
- By:
- Publication type:
- Article
Influence of Nano-CuO on Synthesis and Mechanical Behavior of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminum Based Composite.
- Published in:
- International Journal of Metalcasting, 2022, v. 16, n. 1, p. 292, doi. 10.1007/s40962-021-00597-5
- By:
- Publication type:
- Article
Investigation of geo-mining green roof seismic energy balancing with resin bolting by Universal Drilling Machine: a novel energy-absorbing-based support system.
- Published in:
- Arabian Journal of Geosciences, 2022, v. 15, n. 5, p. 1, doi. 10.1007/s12517-022-09594-2
- By:
- Publication type:
- Article
Experimental and Numerical Investigation of Quasi-Static (10−3 s−1) Fracture Behavior of Armor Steel.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2020, v. 45, n. 7, p. 5623, doi. 10.1007/s13369-020-04519-1
- By:
- Publication type:
- Article
Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2019, v. 44, n. 9, p. 8129, doi. 10.1007/s13369-019-03784-z
- By:
- Publication type:
- Article
The behaviour of AZ91 magnesium-based alloy with Ni–Al<sub>2</sub>O<sub>3</sub> reinforcement.
- Published in:
- Materials Science & Technology, 2024, v. 40, n. 11, p. 851, doi. 10.1177/02670836241228967
- By:
- Publication type:
- Article