Found: 47
Select item for more details and to access through your institution.
Numerical modeling of the cooling cycle and associated thermal stresses in a melt explosive charge.
- Published in:
- AIChE Journal, 2016, v. 62, n. 10, p. 3797, doi. 10.1002/aic.15288
- By:
- Publication type:
- Article
Synthesis and Characterization of Tertiary Nanothermite CNMs/Al/KClO<sub>4</sub> with Enhanced Combustion Characteristics.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2021, v. 46, n. 6, p. 995, doi. 10.1002/prep.202000222
- By:
- Publication type:
- Article
Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2021, v. 46, n. 3, p. 494, doi. 10.1002/prep.202000180
- By:
- Publication type:
- Article
Thermal and Mechanical Properties of Triazole Cross‐Linked Glycidyl Azide (GAP) and Azido Polycarbonate Networks.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2020, v. 45, n. 11, p. 1780, doi. 10.1002/prep.202000038
- By:
- Publication type:
- Article
Preparation of Azido Polycarbonates via Bulk Polymerization of Halogenated Diols.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2020, v. 45, n. 6, p. 889, doi. 10.1002/prep.202000005
- By:
- Publication type:
- Article
Investigations on Non‐isocyanate Based Reticulation of Glycidyl Azide Pre‐polymers.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 6, p. 769, doi. 10.1002/prep.201800298
- By:
- Publication type:
- Article
Erosivity and Performance of Nitrogen‐Rich Propellants.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2018, v. 43, n. 9, p. 879, doi. 10.1002/prep.201700272
- By:
- Publication type:
- Article
Burning Rates and Thermal Behavior of Bistetrazole Containing Gun Propellants.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2017, v. 42, n. 2, p. 149, doi. 10.1002/prep.201600091
- By:
- Publication type:
- Article
Synthesis and Characterization of Deuterated Glycidyl Azide Polymer (GAP).
- Published in:
- Propellants, Explosives, Pyrotechnics, 2006, v. 31, n. 2, p. 131, doi. 10.1002/prep.200600019
- By:
- Publication type:
- Article
Chemical Kinetics and Heat Transfer Issues for a Safe Bench Scale Production of Partially Triazole Substituted Glycidyl Azide Polymer (GAP).
- Published in:
- Propellants, Explosives, Pyrotechnics, 2003, v. 28, n. 3, p. 107, doi. 10.1002/prep.200390016
- By:
- Publication type:
- Article
Shelf Life Prediction of Propellants Using a Reaction Severity Index.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2002, v. 27, n. 5, p. 253, doi. 10.1002/1521-4087(200211)27:5<253::AID-PREP253>3.0.CO;2-8
- By:
- Publication type:
- Article
On the Optimization of GAP-based Ducted Rocket Fuels from Gas Generator Exhaust Characterization.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2001, v. 26, n. 3, p. 118, doi. 10.1002/1521-4087(200106)26:3<118::AID-PREP118>3.0.CO;2-0
- By:
- Publication type:
- Article
Shear rheology of polylactide (PLA)-cellulose nanocrystal (CNC) nanocomposites.
- Published in:
- Cellulose, 2016, v. 23, n. 3, p. 1885, doi. 10.1007/s10570-016-0914-1
- By:
- Publication type:
- Article
Genetic Linkage Analysis of Prostate Cancer Families to Xq27-28.
- Published in:
- Human Heredity, 2001, v. 51, n. 1/2, p. 107, doi. 10.1159/000022965
- By:
- Publication type:
- Article
AN EVALUATION OF THE SOLID HOLD UP DISTRIBUTION IN A FLUIDIZED BED OF NANOPARTICLES USING RADIOACTIVE DENSITOMETRY AND FIBRE OPTICS.
- Published in:
- Canadian Journal of Chemical Engineering, 2008, v. 86, n. 3, p. 543, doi. 10.1002/cjce.20062
- By:
- Publication type:
- Article
Early development of a biodegradable energetic elastomer.
- Published in:
- Journal of Applied Polymer Science, 2011, v. 119, n. 6, p. 3645, doi. 10.1002/app.33063
- By:
- Publication type:
- Article
The effects of nanoclay dispersion levels and processing parameters on the dynamic vulcanization of TPV nanocomposites based on PP/EPDM prepared by reactive extrusion.
- Published in:
- Polymer Engineering & Science, 2012, v. 52, n. 5, p. 1099, doi. 10.1002/pen.22178
- By:
- Publication type:
- Article
Nanoparticle encapsulation by a polymer via in situ polymerization in supercritical conditions.
- Published in:
- Polymer Engineering & Science, 2012, v. 52, n. 3, p. 637, doi. 10.1002/pen.22126
- By:
- Publication type:
- Article
Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin- co-ethylene oxide.
- Published in:
- Polymer Engineering & Science, 2011, v. 51, n. 2, p. 278, doi. 10.1002/pen.21824
- By:
- Publication type:
- Article
The Effect of Compatibilizer on the Co-Continuity and Nanoclay Dispersion Level of TPE Nanocomposites Based on PP/EPDM.
- Published in:
- Polymer Engineering & Science, 2010, v. 50, n. 11, p. 2131, doi. 10.1002/pen.21744
- By:
- Publication type:
- Article
Structure and Properties of Melt-Spun PET/MWCNT Nanocomposite Fibers.
- Published in:
- Polymer Engineering & Science, 2010, v. 50, n. 10, p. 1956, doi. 10.1002/pen.21727
- By:
- Publication type:
- Article
Fabrication of All-Polymeric Photonic Bandgap Bragg Fibers Using Rolling of Coextruded PS/PMMA Multilayer Films.
- Published in:
- Polymer Engineering & Science, 2010, v. 50, n. 6, p. 1122, doi. 10.1002/pen.21631
- By:
- Publication type:
- Article
Microstructure-Properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on PP/EPDM.
- Published in:
- Polymer Engineering & Science, 2007, v. 47, n. 3, p. 207, doi. 10.1002/pen.20673
- By:
- Publication type:
- Article
Polymerization Compounding of Polyurethane-Fumed Silica Composites.
- Published in:
- Polymer Engineering & Science, 2006, v. 46, n. 3, p. 360, doi. 10.1002/pen.20461
- By:
- Publication type:
- Article
Effect of surface modification on the interface quality between hemp and linear medium-density polyethylene.
- Published in:
- Journal of Applied Polymer Science, 2016, v. 133, n. 32, p. n/a, doi. 10.1002/app.43802
- By:
- Publication type:
- Article
Novel fabrication route for porous silicon carbide ceramics through the combination of in situ polymerization and reaction bonding techniques.
- Published in:
- Journal of Applied Polymer Science, 2014, v. 131, n. 13, p. n/a, doi. 10.1002/app.40425
- By:
- Publication type:
- Article
Fabrication strategies and potential applications of the “green” microstructured optical fibers.
- Published in:
- Journal of Biomedical Optics, 2008, v. 13, n. 5, p. 54003, doi. 10.1117/1.2978062
- By:
- Publication type:
- Article
Change in posture control after recent knee anterior cruciate ligament reconstruction?
- Published in:
- Clinical Physiology & Functional Imaging, 2010, v. 30, n. 3, p. 187, doi. 10.1111/j.1475-097X.2010.00926.x
- By:
- Publication type:
- Article
Low density polyethylene composites based on flax fibers modified by a combination of coupling agent.
- Published in:
- Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3553, doi. 10.1002/pen.26126
- By:
- Publication type:
- Article
Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine.
- Published in:
- Polymer Engineering & Science, 2020, v. 60, n. 9, p. 2301, doi. 10.1002/pen.25473
- By:
- Publication type:
- Article
Diffusional effects for the oxidation of SiC powders in thermogravimetric analysis experiments.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 12, p. 4396, doi. 10.1007/s10853-013-7258-0
- By:
- Publication type:
- Article
Behavior of polyethylene composites based on hemp fibers treated by surface‐initiated catalytic polymerization.
- Published in:
- Polymer Composites, 2021, v. 42, n. 5, p. 2334, doi. 10.1002/pc.25981
- By:
- Publication type:
- Article
Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin‐screw extruder and friction stir process.
- Published in:
- Polymer Composites, 2019, v. 40, n. 8, p. 3306, doi. 10.1002/pc.25188
- By:
- Publication type:
- Article
Development of cellulose nanocrystal‐reinforced polylactide: A comparative study on different preparation methods.
- Published in:
- Polymer Composites, 2019, v. 40, p. E342, doi. 10.1002/pc.24676
- By:
- Publication type:
- Article
Polymerization compounding of hemp fibers to improve the mechanical properties of linear medium density polyethylene composites.
- Published in:
- Polymer Composites, 2018, v. 39, n. 8, p. 2860, doi. 10.1002/pc.24279
- By:
- Publication type:
- Article
Enhanced properties of polylactide by incorporating cellulose nanocrystals.
- Published in:
- Polymer Composites, 2018, v. 39, n. 8, p. 2685, doi. 10.1002/pc.24259
- By:
- Publication type:
- Article
The influence of matrix viscosity and composition on the morphology, rheology, and mechanical properties of thermoplastic elastomer nanocomposites based on EPDM/PP.
- Published in:
- Polymer Composites, 2008, v. 29, n. 12, p. 1301, doi. 10.1002/pc.20495
- By:
- Publication type:
- Article
Polymerization compounding of HDPE/Kevlar composites. I. Morphology and mechanical properties.
- Published in:
- Polymer Composites, 2006, v. 27, n. 2, p. 129, doi. 10.1002/pc.20159
- By:
- Publication type:
- Article
Numerical investigation of the hydrodynamics of split-and-recombination and multilamination microreactors.
- Published in:
- AIChE Journal, 2013, v. 59, n. 3, p. 988, doi. 10.1002/aic.13858
- By:
- Publication type:
- Article
Encapsulation of Nanoparticles by Polymerization Compounding in a Gas/Solid Fluidized Bed Reactor.
- Published in:
- AIChE Journal, 2009, v. 55, n. 9, p. 2271, doi. 10.1002/aic.11896
- By:
- Publication type:
- Article
Combustion behaviour and reaction kinetics of GO/Al/oxidizing salts ternary nanothermites.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 19, p. 10245, doi. 10.1007/s10973-022-11259-x
- By:
- Publication type:
- Article
Uncommon external abdominal oblique muscle strain in a professional soccer player: a case report.
- Published in:
- BMC Research Notes, 2014, v. 7, n. 1, p. 684, doi. 10.1186/1756-0500-7-684
- By:
- Publication type:
- Article
Mechanical properties and morphology of modified celluloid foams.
- Published in:
- Journal of Applied Polymer Science, 2021, v. 138, n. 21, p. 1, doi. 10.1002/app.50490
- By:
- Publication type:
- Article
Assessment of Soil Toxicity from an Antitank Firing Range Using Lumbricus terrestris and Eisenia andrei in Mesocosms and Laboratory Studies.
- Published in:
- Ecotoxicology, 2004, v. 13, n. 6, p. 603, doi. 10.1023/B:ECTX.0000037195.69892.35
- By:
- Publication type:
- Article
Implementing Supply-Routing Optimization in a Make-to-Order Manufacturing Network.
- Published in:
- M&SOM: Manufacturing & Service Operations Management, 2010, v. 12, n. 4, p. 547, doi. 10.1287/msom.1090.0288
- By:
- Publication type:
- Article
Prediction of hamstring injury in professional soccer players by isokinetic measurements.
- Published in:
- Muscles, Ligaments & Tendons Journal (MLTJ), 2016, v. 6, n. 1, p. 116
- By:
- Publication type:
- Article
Polymerization Compounding on the Surface of Zirconia Nanoparticles.
- Published in:
- Macromolecular Symposia, 2006, v. 243, n. 1, p. 268, doi. 10.1002/masy.200651125
- By:
- Publication type:
- Article