Found: 125
Select item for more details and to access through your institution.
Evaluation of a multi-objective model for pulsed heat pipe performance.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 14, p. 7621, doi. 10.1007/s10973-024-13313-2
- By:
- Publication type:
- Article
Correction: Thermophysical properties and heat transfer in mono and hybrid nanofluids with different base fluids: an overview.
- Published in:
- 2024
- By:
- Publication type:
- Correction Notice
Experimental investigation and machine learning-based prediction of STHX performance with ethylene glycol–water blends and graphene nanoparticles.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 7, p. 2969, doi. 10.1007/s10973-024-12890-6
- By:
- Publication type:
- Article
Numerical study of microchamber and cylindrical inserts on enhancement of heat transfer in microchannel heat exchanger.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 5, p. 2385, doi. 10.1007/s10973-023-12809-7
- By:
- Publication type:
- Article
Thermophysical properties and heat transfer in mono and hybrid nanofluids with different base fluids: an overview.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 4, p. 1649, doi. 10.1007/s10973-023-12769-y
- By:
- Publication type:
- Article
Correction to: Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics.
- Published in:
- 2022
- By:
- Publication type:
- Correction Notice
Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 1, p. 525, doi. 10.1007/s10973-020-10293-x
- By:
- Publication type:
- Article
An experimental analysis of single slope solar still integrated with parabolic trough collector and packed layer of glass balls.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2021, v. 146, n. 6, p. 2655, doi. 10.1007/s10973-020-10320-x
- By:
- Publication type:
- Article
Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2021, v. 146, n. 1, p. 265, doi. 10.1007/s10973-020-09940-0
- By:
- Publication type:
- Article
An experimental investigation of eco-friendly treated GNP heat transfer growth: circular and square conduit comparison.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2021, v. 145, n. 1, p. 139, doi. 10.1007/s10973-020-09652-5
- By:
- Publication type:
- Article
THE MECHANICAL FACTORS INFLUENCING THE ASSESSMENT OF INTERMEDIATE STENOSIS SEVERITY EXPLAINED THROUGH FRACTIONAL FLOW RESERVE.
- Published in:
- Journal of Mechanics in Medicine & Biology, 2017, v. 17, n. 5, p. -1, doi. 10.1142/S0219519417300010
- By:
- Publication type:
- Article
Investigation of Coronavirus Deposition in Realistic Human Nasal Cavity and Impact of Social Distancing to Contain COVID-19: A Computational Fluid Dynamic Approach.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2020, v. 125, n. 3, p. 1185, doi. 10.32604/cmes.2020.015015
- By:
- Publication type:
- Article
Green synthesis of titanium dioxide nanoparticles using Laurus nobilis (bay leaf): antioxidant and antimicrobial activities.
- Published in:
- Applied Nanoscience, 2023, v. 13, n. 2, p. 1477, doi. 10.1007/s13204-021-02065-2
- By:
- Publication type:
- Article
Wound dressings coated with silver nanoparticles and essential oil of Labdanum.
- Published in:
- Applied Nanoscience, 2023, v. 13, n. 2, p. 1345, doi. 10.1007/s13204-021-02040-x
- By:
- Publication type:
- Article
Green and ecofriendly synthesis of cobalt oxide nanoparticles using Phoenix dactylifera L: antimicrobial and photocatalytic activity.
- Published in:
- Applied Nanoscience, 2023, v. 13, n. 2, p. 1367, doi. 10.1007/s13204-021-02038-5
- By:
- Publication type:
- Article
Biochar produced from waste‐based feedstocks: Mechanisms, affecting factors, economy, utilization, challenges, and prospects.
- Published in:
- GCB Bioenergy, 2024, v. 16, n. 8, p. 1, doi. 10.1111/gcbb.13175
- By:
- Publication type:
- Article
Noise characteristics of grass-trimming machine engines and their effect on operators.
- Published in:
- Noise & Health, 2009, v. 11, n. 43, p. 98, doi. 10.4103/1463-1741.50694
- By:
- Publication type:
- Article
Post‐curing and fiber hybridization effects on mode‐II interlaminar fracture toughness of glass/carbon/epoxy composites.
- Published in:
- Polymer Composites, 2023, v. 44, n. 8, p. 4734, doi. 10.1002/pc.27436
- By:
- Publication type:
- Article
Process parameter optimisation for selective laser melting of AlSi10Mg-316L multi-materials using machine learning method.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3093, doi. 10.1007/s00170-023-12489-5
- By:
- Publication type:
- Article
Numerical analysis of heat transfer in human head.
- Published in:
- Journal of Mechanical Science & Technology, 2019, v. 33, n. 7, p. 3597, doi. 10.1007/s12206-019-0654-x
- By:
- Publication type:
- Article
Machine Learning Prediction and Optimization of Performance and Emissions Characteristics of IC Engine.
- Published in:
- Sustainability (2071-1050), 2023, v. 15, n. 18, p. 13825, doi. 10.3390/su151813825
- By:
- Publication type:
- Article
Estimation of Evaporation of Water from a Liquid Desiccant Solar Collector and Regenerator by Using Conservation of Mass and Energy Principles.
- Published in:
- Sustainability (2071-1050), 2023, v. 15, n. 8, p. 6520, doi. 10.3390/su15086520
- By:
- Publication type:
- Article
A parametric study of the effect of arterial wall curvature on non-invasive assessment of stenosis severity: computational fluid dynamics study.
- Published in:
- Current Science (00113891), 2016, v. 111, n. 3, p. 483, doi. 10.18520/cs/v111/i3/483-491
- By:
- Publication type:
- Article
Influence of variable bifurcation angulation and outflow boundary conditions in 3D finite element modelling of left coronary artery on coronary diagnostic parameter.
- Published in:
- Current Science (00113891), 2016, v. 111, n. 2, p. 368, doi. 10.18520/cs/v111/i2/368-374
- By:
- Publication type:
- Article
Heat Transfer and Entropy in a Vertical Porous Plate Subjected to Suction Velocity and MHD.
- Published in:
- Entropy, 2021, v. 23, n. 8, p. 1069, doi. 10.3390/e23081069
- By:
- Publication type:
- Article
Mathematical Modelling and Optimization for Facile Synthesis of Structured Activated Carbon (ACs) from Adansonia kilima (Baobab) Wood Chips Integrating Microwave-Assisted Pyrolysis for the Elimination of Lead (II) Cations from Wastewater Effluents.
- Published in:
- Molecules, 2023, v. 28, n. 18, p. 6640, doi. 10.3390/molecules28186640
- By:
- Publication type:
- Article
Surface Functionalization of Magnetite Nanoparticles with Multipotent Antioxidant as Potential Magnetic Nanoantioxidants and Antimicrobial Agents.
- Published in:
- Molecules, 2022, v. 27, n. 3, p. 789, doi. 10.3390/molecules27030789
- By:
- Publication type:
- Article
Kharif Crops Selection for Sustainable Farming Practices in the Rajasthan-India Using Multiple Attribute-Based Decision-Making.
- Published in:
- Agronomy, 2020, v. 10, n. 4, p. 536, doi. 10.3390/agronomy10040536
- By:
- Publication type:
- Article
Statistical Modeling and Performance Optimization of a Two-Chamber Microbial Fuel Cell by Response Surface Methodology.
- Published in:
- Catalysts (2073-4344), 2021, v. 11, n. 10, p. 1202, doi. 10.3390/catal11101202
- By:
- Publication type:
- Article
Experimental investigation and crashworthiness analysis of 3D printed carbon PA automobile bumper to improve energy absorption by using LS-DYNA.
- Published in:
- Advances in Mechanical Engineering (Sage Publications Inc.), 2023, v. 15, n. 6, p. 1, doi. 10.1177/16878132231181058
- By:
- Publication type:
- Article
Performance and emission analysis of multicylinder common rail direct injection diesel engine powered with blends of tyre pyrolysis oil-ethanol diesel.
- Published in:
- Journal of Engineering Research (2307-1877), 2022, v. 10, n. 1B, p. 167, doi. 10.36909/jer.8583
- By:
- Publication type:
- Article
Size Effect of Nanoceria Blended with CIME Biodiesel on Engine Characteristics.
- Published in:
- Nanomaterials (2079-4991), 2023, v. 13, n. 1, p. 6, doi. 10.3390/nano13010006
- By:
- Publication type:
- Article
Multi-Scale Study on Mechanical Property and Strength of New Green Sand (Poly Lactic Acid) as Replacement of Fine Aggregate in Concrete Mix.
- Published in:
- Symmetry (20738994), 2020, v. 12, n. 11, p. 1823, doi. 10.3390/sym12111823
- By:
- Publication type:
- Article
Effect of Zinc Oxide Nano-Additives and Soybean Biodiesel at Varying Loads and Compression Ratios on VCR Diesel Engine Characteristics.
- Published in:
- Symmetry (20738994), 2020, v. 12, n. 6, p. 1042, doi. 10.3390/sym12061042
- By:
- Publication type:
- Article
Super Stability of Ag Nanoparticle in Crystalline Lamellar (Lc) Liquid Crystal Matrix at Different pH Environment.
- Published in:
- Symmetry (20738994), 2020, v. 12, n. 1, p. 31, doi. 10.3390/sym12010031
- By:
- Publication type:
- Article
Investigation on Surface Properties of Mn-Doped CdSe Quantum Dots Studied by X-ray Photoelectron Spectroscopy.
- Published in:
- Symmetry (20738994), 2019, v. 11, n. 10, p. 1250, doi. 10.3390/sym11101250
- By:
- Publication type:
- Article
Removal of Azo Dyes from Aqueous Effluent Using Bio-Based Activated Carbons: Toxicity Aspects and Environmental Impact.
- Published in:
- Separations (2297-8739), 2023, v. 10, n. 9, p. 506, doi. 10.3390/separations10090506
- By:
- Publication type:
- Article
Insights into anaerobic digestion of microalgal biomass for enhanced energy recovery.
- Published in:
- Frontiers in Energy Research, 2024, p. 1, doi. 10.3389/fenrg.2024.1355686
- By:
- Publication type:
- Article
Computational Analysis of Airflow in Upper Airway under Light and Heavy Breathing Conditions for a Realistic Patient Having Obstructive Sleep Apnea.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2021, v. 128, n. 2, p. 583, doi. 10.32604/cmes.2021.015549
- By:
- Publication type:
- Article
Multiple Response Optimization of Dimensional Accuracy of Nimonic Alloy Miniature Gear Machined on Wire Edm Using Entropy Topsis Andpareto Anova.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2021, v. 126, n. 1, p. 241, doi. 10.32604/cmes.2021.013368
- By:
- Publication type:
- Article
Exploring E-Waste Resources Recovery in Household Solid Waste Recycling.
- Published in:
- Processes, 2020, v. 8, n. 9, p. 1047, doi. 10.3390/pr8091047
- By:
- Publication type:
- Article
Multi-Response Optimization of Nanofluid-Based I. C. Engine Cooling System Using Fuzzy PIV Method.
- Published in:
- Processes, 2020, v. 8, n. 1, p. 30, doi. 10.3390/pr8010030
- By:
- Publication type:
- Article
Evaluation of Municipal Solid Wastes Based Energy Potential in Urban Pakistan.
- Published in:
- Processes, 2019, v. 7, n. 11, p. 848, doi. 10.3390/pr7110848
- By:
- Publication type:
- Article
Drug Leaching Properties of Vancomycin Loaded Mesoporous Hydroxyapatite as Bone Substitutes.
- Published in:
- Processes, 2019, v. 7, n. 11, p. 826, doi. 10.3390/pr7110826
- By:
- Publication type:
- Article
Lattice Strain Analysis of a Mn-Doped CdSe QD System Using Crystallography Techniques.
- Published in:
- Processes, 2019, v. 7, n. 10, p. 639, doi. 10.3390/pr7100639
- By:
- Publication type:
- Article
Impact of Artificial Compressibility on the Numerical Solution of Incompressible Nanofluid Flow.
- Published in:
- Computers, Materials & Continua, 2023, v. 74, n. 3, p. 5123, doi. 10.32604/cmc.2023.034008
- By:
- Publication type:
- Article
Efficient Numerical Scheme for Solving Large System of Nonlinear Equations.
- Published in:
- Computers, Materials & Continua, 2023, v. 74, n. 3, p. 5331, doi. 10.32604/cmc.2023.033528
- By:
- Publication type:
- Article
Forensic Studies on Spent Catalytic Converters to Examine the Effect of Diesel and B100 Pongamia Biodiesel on Emissions.
- Published in:
- Sustainability (2071-1050), 2021, v. 13, n. 19, p. 10729, doi. 10.3390/su131910729
- By:
- Publication type:
- Article
Biodiesel Production Using Modified Direct Transesterification by Sequential Use of Acid-Base Catalysis and Performance Evaluation of Diesel Engine Using Various Blends.
- Published in:
- Sustainability (2071-1050), 2021, v. 13, n. 17, p. 9731, doi. 10.3390/su13179731
- By:
- Publication type:
- Article
Influence of Combustion Chamber Shapes and Nozzle Geometry on Performance, Emission, and Combustion Characteristics of CRDI Engine Powered with Biodiesel Blends.
- Published in:
- Sustainability (2071-1050), 2021, v. 13, n. 17, p. 9613, doi. 10.3390/su13179613
- By:
- Publication type:
- Article