Found: 85
Select item for more details and to access through your institution.
EFFECT OF PARTICLEBOARD DENSITY AND CORE LAYER PARTICLE THICKNESS ON SURFACE ROUGHNESS.
- Published in:
- Drewno, 2019, v. 62, n. 204, p. 71, doi. 10.12841/wood.1644-3985.292.13
- By:
- Publication type:
- Article
Mechanical Properties of Epoxy Composites Reinforced with Areca catechu Fibers Containing Silicon Carbide.
- Published in:
- BioResources, 2024, v. 19, n. 2, p. 2352, doi. 10.15376/biores.19.2.2353-2370
- By:
- Publication type:
- Article
Selection and Processing of Natural Fibers and Nanocellulose for Biocomposite Applications: A Brief Review.
- Published in:
- BioResources, 2024, v. 19, n. 1, p. 1789, doi. 10.15376/biores.19.1.Palanisamy
- By:
- Publication type:
- Article
Use of Hemp Waste for the Development of Myceliumgrown Matrix Biocomposites: A Concise Bibliographic Review.
- Published in:
- BioResources, 2023, v. 18, n. 4, p. 8771, doi. 10.15376/biores.18.4.Palanisamy
- By:
- Publication type:
- Article
Effect of Content and Particle Size of Used Beverage Carton Pieces on the Properties of HDPE Composites.
- Published in:
- BioResources, 2023, v. 18, n. 2, p. 2815, doi. 10.15376/biores.18.2.2815-2825
- By:
- Publication type:
- Article
Effect of Thermal Modification on the Surface Quality of a Coating Applied to Wood via the Electrostatic Spray Deposition Technique.
- Published in:
- BioResources, 2021, v. 16, n. 4, p. 7355, doi. 10.15376/biores.16.4.7355-7366
- By:
- Publication type:
- Article
Surface Properties of Oriented Strand Board Coated by Electrostatic Dry Powder Spray Deposition Technique.
- Published in:
- BioResources, 2020, v. 15, n. 1, p. 1521, doi. 10.15376/biores.15.1.1521-1530
- By:
- Publication type:
- Article
Increasing the Calorific Properties of Sawdust Waste from Pellets by Torrefaction.
- Published in:
- BioResources, 2019, v. 14, n. 4, p. 7821, doi. 10.15376/biores.14.4.7821-7839
- By:
- Publication type:
- Article
Potential Use of Textile Dust in the Middle Layer of Three-layered Particleboards as an Eco-friendly Solution.
- Published in:
- BioResources, 2019, v. 14, n. 1, p. 120, doi. 10.15376/biores.14.1.120-127
- By:
- Publication type:
- Article
Technological Properties of Cement-Bonded Composite Board Produced with the Main Veins of Oil Palm (Elaeis guineensis) Particles.
- Published in:
- BioResources, 2017, v. 12, n. 2, p. 3583, doi. 10.15376/biores.12.2.3583-3600
- By:
- Publication type:
- Article
Potential Use of Hazelnut Husk in Recycled High-Density Polyethylene Composites.
- Published in:
- BioResources, 2016, v. 11, n. 3, p. 7476, doi. 10.15376/biores.11.3.7476-7489
- By:
- Publication type:
- Article
Thermal Analysis and Morphological Characterization of Thermoplastic Composites Filled with Almond Shell Flour/Montmorillonite.
- Published in:
- BioResources, 2016, v. 11, n. 3, p. 6768, doi. 10.15376/biores.11.3.6768-6779
- By:
- Publication type:
- Article
Technological and Thermal Properties of Thermoplastic Composites Filled with Heat-treated Alder Wood.
- Published in:
- BioResources, 2016, v. 11, n. 2, p. 3153, doi. 10.15376/biores.11.2.3153-3164
- By:
- Publication type:
- Article
Mechanical Properties and Morphology of Wood Plastic Composites Produced with Thermally Treated Beech Wood.
- Published in:
- BioResources, 2016, v. 11, n. 1, p. 1494, doi. 10.15376/biores.11.1.1494-1504
- By:
- Publication type:
- Article
Potential Use of Waste Marble Powder as Adhesive Filler in the Manufacture of Laminated Veneer Lumber.
- Published in:
- BioResources, 2015, v. 10, n. 1, p. 1686, doi. 10.15376/biores.10.1.1686-1695
- By:
- Publication type:
- Article
Surface Properties and Hardness of Polypropylene Composites Filled With Sunflower Stalk Flour.
- Published in:
- BioResources, 2013, v. 8, n. 1, p. 592
- By:
- Publication type:
- Article
Effect of Resination Technique on Mechanical Properties of Medium Density Fiberboard.
- Published in:
- BioResources, 2013, v. 8, n. 1, p. 420
- By:
- Publication type:
- Article
EFFECT OF FIRE RETARDANTS ON SURFACE ROUGHNESS AND WETTABILITY OF WOOD PLASTIC COMPOSITE PANELS.
- Published in:
- BioResources, 2011, v. 6, n. 3, p. 3178, doi. 10.15376/biores.6.3.3178-3187
- By:
- Publication type:
- Article
PARTICLEBOARD AND MDF PANELS MADE FROM A MIXTURE OF WOOD AND PINECONES: RESISTANCE TO DECAY FUNGI AND TERMITES UNDER LABORATORY CONDITIONS.
- Published in:
- BioResources, 2011, v. 6, n. 2, p. 2045, doi. 10.15376/biores.6.2.2045-2054
- By:
- Publication type:
- Article
DIMENSIONAL STABILITY PERFORMANCE OF FIRE RETARDANT TREATED VENEER-ORIENTED STRANDBOARD COMPOSITES.
- Published in:
- BioResources, 2011, v. 6, n. 1, p. 308
- By:
- Publication type:
- Article
EFFECT OF PINE CONE RATIO ON THE WETTABILITY AND SURFACE ROUGHNESS OF PARTICLEBOARD.
- Published in:
- BioResources, 2010, v. 5, n. 3, p. 1824, doi. 10.15376/biores.5.3.1824-1833
- By:
- Publication type:
- Article
SURFACE CHARACTERISTICS AND OVERLAYING PROPERTIES OF MDF PANELS MADE FROM THERMALLY TREATED RUBBERWOOD FIBERS.
- Published in:
- BioResources, 2010, v. 5, n. 2, p. 968, doi. 10.15376/biores.5.2.968-978
- By:
- Publication type:
- Article
SURFACE CHARACTERISTICS AND OVERLAYING PROPERTIES OF MDF PANELS MADE FROM THERMALLY TREATED RUBBERWOOD FIBERS.
- Published in:
- BioResources, 2010, p. 968, doi. 10.15376/biores.5.2.968-978
- By:
- Publication type:
- Article
WETTABILITY OF FIRE RETARDANT TREATED LAMINATED VENEER LUMBER (LVL) MANUFACTURED FROM VENEERS DRIED AT DIFFERENT TEMPERATURES.
- Published in:
- BioResources, 2009, v. 4, n. 4, p. 1536, doi. 10.15376/biores.4.4.1536-1544
- By:
- Publication type:
- Article
EFFECT OF CORE LAYER COMPOSITION ON WATER RESISTANCE AND MECHANICAL PROPERTIES OF HYBRID PARTICLEBOARD.
- Published in:
- Environmental Engineering & Management Journal (EEMJ), 2018, v. 17, n. 12, p. 2857
- By:
- Publication type:
- Article
Sunflower seed cake as reinforcing filler in thermoplastic composites.
- Published in:
- Journal of Applied Polymer Science, 2013, v. 129, n. 3, p. 1170, doi. 10.1002/app.38806
- By:
- Publication type:
- Article
Compression wood as a source of reinforcing filler for thermoplastic composites.
- Published in:
- Journal of Applied Polymer Science, 2012, v. 123, n. 3, p. 1740, doi. 10.1002/app.34627
- By:
- Publication type:
- Article
Properties of flat-pressed wood plastic composites containing fire retardants.
- Published in:
- Journal of Applied Polymer Science, 2011, v. 122, n. 5, p. 3201, doi. 10.1002/app.34346
- By:
- Publication type:
- Article
CATALYTIC HEAT TREATMENT OF WOOD.
- Published in:
- Pro Ligno, 2015, v. 11, n. 4, p. 337
- By:
- Publication type:
- Article
IMPACTS OF IMPREGNATION WITH SOME CHEMICALS ON THE SHEAR STRENGTH OF OAK (QUERCUS PETRAEA SUBSP. IBERICA) AND SCOTS PINE (PINUS SYLVESTRIS L.).
- Published in:
- Pro Ligno, 2015, v. 11, n. 4, p. 283
- By:
- Publication type:
- Article
UTILIZATION OF TINDER FUNGUS AS FILLER IN MANUFACTURE OF HDPE COMPOSITES.
- Published in:
- Pro Ligno, 2015, v. 11, n. 4, p. 122
- By:
- Publication type:
- Article
DETERMINATION OF THE RELATIONSHIPS BETWEEN BRINELL HARDNESS AND TENSILE STRENGTH OF WOOD PLASTIC COMPOSITES.
- Published in:
- Pro Ligno, 2013, v. 9, n. 4, p. 430
- By:
- Publication type:
- Article
Potential utilization of burned wood in manufacture of medium density fiberboard.
- Published in:
- Journal of Material Cycles & Waste Management, 2013, v. 15, n. 2, p. 195, doi. 10.1007/s10163-012-0108-3
- By:
- Publication type:
- Article
Tribological Analysis of Jute/Coir Polyester Composites Filled with Eggshell Powder (ESP) or Nanoclay (NC) Using Grey Rational Method.
- Published in:
- Fibers, 2022, v. 10, n. 7, p. 60, doi. 10.3390/fib10070060
- By:
- Publication type:
- Article
Surface Characterization of Heat-Treated Wood Filled Styrene Maleic Anhydride (SMA) Composites.
- Published in:
- Karaelmas Science & Engineering Journal / Karaelmas Fen ve Mühendislik Dergisi, 2018, v. 8, n. 1, p. 299, doi. 10.7212%2Fzkufbd.v8i1.1066
- By:
- Publication type:
- Article
Effect of Lignin Modification of Recycled and Fresh Wood Fibers on Physical, Mechanical, and Thermal Properties of Fiberboard.
- Published in:
- Forests (19994907), 2023, v. 14, n. 10, p. 2007, doi. 10.3390/f14102007
- By:
- Publication type:
- Article
Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data.
- Published in:
- Forests (19994907), 2023, v. 14, n. 1, p. 95, doi. 10.3390/f14010095
- By:
- Publication type:
- Article
Influence of Pre-Impregnation Acetic Anhydride and Heating Time on Mechanical and Physical Properties of Wood-Plastic Composites.
- Published in:
- Wood Industry / Drvna Industrija, 2023, v. 74, n. 4, p. 479, doi. 10.5552/drvind.2023.0117
- By:
- Publication type:
- Article
Physical and Mechanical Properties of Thermoplastic Composites Filled with Wood Flour of Underutilized Chaste Tree.
- Published in:
- Wood Industry / Drvna Industrija, 2022, v. 73, n. 4, p. 495, doi. 10.5552/drvind.2022.2128
- By:
- Publication type:
- Article
Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites.
- Published in:
- Wood Industry / Drvna Industrija, 2022, v. 73, n. 1, p. 59, doi. 10.5552/drvind.2022.2104
- By:
- Publication type:
- Article
Surface Roughness and Wettability of Surface Densified Heat-Treated Norway Spruce (Picea abies L. Karst.).
- Published in:
- Wood Industry / Drvna Industrija, 2019, v. 70, n. 4, p. 377, doi. 10.5552/drvind.2019.1852
- By:
- Publication type:
- Article
Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer.
- Published in:
- Wood Industry / Drvna Industrija, 2018, v. 69, n. 4, p. 379, doi. 10.5552/drind.2018.1804
- By:
- Publication type:
- Article
Investigation of the Effects of Heat Treatment Applied to Beech Plywood.
- Published in:
- Wood Industry / Drvna Industrija, 2018, v. 69, n. 4, p. 349, doi. 10.5552/drind.2018.1768
- By:
- Publication type:
- Article
Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat-Treated Wood.
- Published in:
- Wood Industry / Drvna Industrija, 2018, v. 69, n. 3, p. 207, doi. 10.5552/drind.2018.1717
- By:
- Publication type:
- Article
The Effect of Nanoboron Nitride on Some Properties of Biopolymer Nanocomposites with Cellulose Nanofibrils and Nanoclays.
- Published in:
- Wood Industry / Drvna Industrija, 2018, v. 69, n. 1, p. 43, doi. 10.5552/drind.2018.1737
- By:
- Publication type:
- Article
Effect of Sanding on Surface Properties of Medium Density Fiberboard.
- Published in:
- Wood Industry / Drvna Industrija, 2010, v. 61, n. 3, p. 175
- By:
- Publication type:
- Article
A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications.
- Published in:
- Polymer Engineering & Science, 2024, v. 64, n. 6, p. 2345, doi. 10.1002/pen.26713
- By:
- Publication type:
- Article
Mechanical and Thermal Properties of 3D‐Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles.
- Published in:
- Macromolecular Materials & Engineering, 2023, v. 308, n. 12, p. 1, doi. 10.1002/mame.202300180
- By:
- Publication type:
- Article
Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite.
- Published in:
- Journal of Materials Science, 2010, v. 45, n. 5, p. 1336, doi. 10.1007/s10853-009-4087-2
- By:
- Publication type:
- Article
Effect of panel density on dimensional stability of medium and high density fiberboards.
- Published in:
- Journal of Materials Science, 2007, v. 42, n. 20, p. 8551, doi. 10.1007/s10853-007-1782-8
- By:
- Publication type:
- Article