Works by Anwar, Saqib

Results: 82

Developing an intelligent approach based on ANFIS and advanced NSGA-III for improving the turning performance of additively manufactured γ-TiAl alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3333, doi. 10.1007/s00170-025-15366-5

By:

Nasr, Mustafa M.;
Anwar, Saqib

Publication type:

Article

Correction to: Investigating drilling efficiency: a study on indexable centerless drilling of Ti-6Al-4 V alloy.

Published in:

2024

By:

Zahoor, Sadaf;
Ehsan, Sana;
Raza, Syed Farhan;
Khan, Atif Qayyum;
Anwar, Saqib;
Ali, Ahad

Publication type:

Correction Notice

Comparative investigation of novel dielectrics against cryogenically refined electrodes for modelling and optimizing EDM cutting proficiency using artificial neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 11/12, p. 5951, doi. 10.1007/s00170-024-14501-y

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Mahmood, Muhammad Arif;
Anwar, Saqib

Publication type:

Article

Investigating drilling efficiency: a study on indexable centerless drilling of Ti-6Al-4 V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 5/6, p. 2157, doi. 10.1007/s00170-024-13760-z

By:

Zahoor, Sadaf;
Ehsan, Sana;
Raza, Syed Farhan;
Khan, Atif Qayyum;
Anwar, Saqib;
Ali, Ahad

Publication type:

Article

Finish dry turning of DC53 tool steel via modified carbide inserts: a study of machining dynamics.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4505, doi. 10.1007/s00170-024-13594-9

By:

Hassan, Sana;
Khan, Sarmad Ali;
Naveed, Rakhshanda;
Anwar, Saqib;
Farooq, Muhammad Umar

Publication type:

Article

Circular usage of waste cooking oil towards green electrical discharge machining process with lower carbon emissions.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 5133, doi. 10.1007/s00170-024-13322-3

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Anwar, Saqib;
Zia, Abdul Wasy

Publication type:

Article

Machine learning for multi-dimensional performance optimization and predictive modelling of nanopowder-mixed electric discharge machining (EDM).

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5641, doi. 10.1007/s00170-024-13023-x

By:

Sana, Muhammad;
Asad, Muhammad;
Farooq, Muhammad Umar;
Anwar, Saqib;
Talha, Muhammad

Publication type:

Article

A comparative study on the effect of deep and shallow cryogenic electrodes on tool wear rate and overcut with waste bio-oil in electric discharge machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 7/8, p. 3307, doi. 10.1007/s00170-023-12860-6

By:

Sana, Muhammad;
Ishfaq, Kashif;
Waseem, Muhammad Umair;
Anwar, Saqib;
Mahmood, Muhammad Arif

Publication type:

Article

Exploring wide-parametric range for tool electrode selection based on surface characterization and machining rate employing powder-mixed electric discharge machining process for Ti6Al4V ELI.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2823, doi. 10.1007/s00170-023-12469-9

By:

Farooq, Muhammad Umar;
Anwar, Saqib;
Ali, Muhammad Asad;
Hassan, Abual;
Mushtaq, Ray Tahir

Publication type:

Article

Mathematical modeling and experimental evaluation of superalloy EDM using cryogenically treated electrodes and transformer oil-based dielectrics: a correlation study.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 3/4, p. 1649, doi. 10.1007/s00170-023-12398-7

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Mahmood, Muhammad Arif;
Anwar, Saqib

Publication type:

Article

Experimental investigation of the influence of wire offset and composition on complex profile WEDM of Ti6Al4V using trim-pass strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 3/4, p. 1209, doi. 10.1007/s00170-023-11564-1

By:

Rehan, Muhammad;
Khan, Sarmad Ali;
Naveed, Rakhshanda;
Usman, Muhammad;
Anwar, Saqib;
AlFaify, Abdullah Yahia;
Pruncu, Catalin Iulian;
Lamberti, Luciano

Publication type:

Article

Correction to: Surface quality investigation in surfactant‑based EDM of Inconel 617 using deep cryogenically treated electrodes.

Published in:

2023

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Anwar, Saqib;
Alfaify, Abdullah Yahia;
Zia, Abdul Wasy

Publication type:

Correction Notice

Surface quality investigation in surfactant-based EDM of Inconel 617 using deep cryogenically treated electrodes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 861, doi. 10.1007/s00170-023-11588-7

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Anwar, Saqib;
Alfaify, Abdullah Yahia;
Zia, Abdul Wasy

Publication type:

Article

An in-depth analysis of tool wear mechanisms and surface integrity during high-speed hard turning of AISI D2 steel via novel inserts.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 4013, doi. 10.1007/s00170-022-10151-0

By:

Khan, Sarmad Ali;
Ameer, Muhammad Faizan;
Uddin, Ghulam Moeen;
Ali, Muhammad Asad;
Anwar, Saqib;
Farooq, Muhammad Umar;
Alfaify, Abdullah

Publication type:

Article

EDM of Ti6Al4V under nano-graphene mixed dielectric: a detailed roughness analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7375, doi. 10.1007/s00170-022-09207-y

By:

Ishfaq, Kashif;
Maqsood, Muhammad Asad;
Anwar, Saqib;
Harris, Muhammad;
Alfaify, Abdullah;
Zia, Abdul Wasy

Publication type:

Article

Comparison of machinability and economic aspects in turning of Haynes-25 alloy under novel hybrid cryogenic-LN oils-on-water approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 1/2, p. 427, doi. 10.1007/s00170-022-08815-y

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Alfaify, Abdullah;
Jamil, Muhammad;
Sharma, Shubham;
Farooq, Muhammad Umar;
Khaliq, Waqas;
Iqbal, Asif

Publication type:

Article

Machinability analysis of dry and liquid nitrogen–based cryogenic cutting of Inconel 718: experimental and FE analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 11/12, p. 3801, doi. 10.1007/s00170-021-08173-1

By:

Pervaiz, Salman;
Kannan, Sathish;
Anwar, Saqib;
Huo, Dehong

Publication type:

Article

On the influence of heat treatment in suppressing the layer orientation effect in finishing of electron beam melted Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 9/10, p. 3035, doi. 10.1007/s00170-021-07995-3

By:

Dabwan, Abdulmajeed;
Anwar, Saqib;
Al-Samhan, Ali M.;
Nasr, Mustafa M.;
AlFaify, Abdullah

Publication type:

Article

Machinability of titanium alloy through laser machining: material removal and surface roughness analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3303, doi. 10.1007/s00170-019-04564-7

By:

Ahmed, Naveed;
Ahmad, Shafiq;
Anwar, Saqib;
Hussain, Amjad;
Rafaqat, Madiha;
Zaindin, Mazen

Publication type:

Article

Experimental investigation and multi-objective optimization of Nd:YAG laser micro-channeling process of zirconia dental ceramic.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 98, n. 5-8, p. 2213, doi. 10.1007/s00170-018-2374-2

By:

Abdo, Basem M. A.;
El-Tamimi, Abdulaziz M.;
Anwar, Saqib;
Umer, Usama;
Alahmari, Abdulrahman M.;
Ghaleb, Mageed A.

Publication type:

Article

Electron beam melting of gamma titanium aluminide and investigating the effect of EBM layer orientation on milling performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 9-12, p. 3093, doi. 10.1007/s00170-018-1802-7

By:

Anwar, Saqib;
Ahmed, Naveed;
Abdo, Basem M.;
Pervaiz, Salman;
Chowdhury, M. A. K.;
Alahmari, Abdulrahman M.

Publication type:

Article

Optimization of PETG 3D printing parameters for the design and development of biocompatible bone implants.

Published in:

Frontiers in Bioengineering & Biotechnology, 2025, p. 1, doi. 10.3389/fbioe.2025.1549191

By:

Sultan, M. Moeen;
Aized, Tauseef;
Farooq, M.;
Anwar, Saqib;
Ahmad, Naseer;
Tauseef, Ambreen;
Riaz, Fahid

Publication type:

Article

Reducing micro-machining errors during electric discharge machining of titanium alloy using nonionic liquids.

Published in:

Materials & Manufacturing Processes, 2024, v. 39, n. 4, p. 449, doi. 10.1080/10426914.2023.2236199

By:

Farooq, Muhammad Umar;
Anwar, Saqib;
Hurairah, Abu

Publication type:

Article

A Hybrid Fuzzy Multi-Criteria Decision-Making Model for Evaluating the Influence of Industry 4.0 Technologies on Manufacturing Strategies.

Published in:

Machines, 2023, v. 11, n. 2, p. 310, doi. 10.3390/machines11020310

By:

Abdullah, Fawaz M.;
Al-Ahmari, Abdulrahman M.;
Anwar, Saqib

Publication type:

Article

Effect of Self-Adhesive Resin Cement Film Thickness on the Shear Bond Strength of Lithium Disilicate Ceramic–Cement–Tooth Triplex.

Published in:

Inorganics, 2024, v. 12, n. 1, p. 14, doi. 10.3390/inorganics12010014

By:

Alrabeah, Ghada;
Binhassan, Faisal;
Al Khaldi, Sultan;
Al Saleh, Ahmed;
Al Habeeb, Khaled;
Anwar, Saqib;
Habib, Syed Rashid

Publication type:

Article

Dissimilar Rotary Friction Welding of Inconel 718 to F22 Using Inconel 625 Interlayer.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 22, p. 10684, doi. 10.3390/app112210684

By:

Rehman, Ateekh Ur;
Kishore Babu, Nagumothu;
Talari, Mahesh Kumar;
Anwar, Saqib;
Usmani, Yusuf;
Al-Samhan, Ali M.

Publication type:

Article

Prediction of Mechanical Properties for Carbon fiber/PLA Composite Lattice Structures Using Mathematical and ANFIS Models.

Published in:

Polymers (20734360), 2023, v. 15, n. 7, p. 1720, doi. 10.3390/polym15071720

By:

Saleh, Mustafa;
Anwar, Saqib;
Al-Ahmari, Abdulrahman M;
AlFaify, Abdullah Yahia

Publication type:

Article

Compression Performance and Failure Analysis of 3D-Printed Carbon Fiber/PLA Composite TPMS Lattice Structures.

Published in:

Polymers (20734360), 2022, v. 14, n. 21, p. 4595, doi. 10.3390/polym14214595

By:

Saleh, Mustafa;
Anwar, Saqib;
Al-Ahmari, Abdulrahman M.;
Alfaify, Abdullah

Publication type:

Article

Thermal Performance Analysis of Various Heat Sinks Based on Alumina NePCM for Passive Cooling of Electronic Components: An Experimental Study.

Published in:

Energies (19961073), 2022, v. 15, n. 22, p. 8416, doi. 10.3390/en15228416

By:

Zahid, Imran;
Farooq, Muhammad;
Farhan, Muhammad;
Usman, Muhammad;
Qamar, Adnan;
Imran, Muhammad;
Alqahtani, Mejdal A.;
Anwar, Saqib;
Sultan, Muhammad;
Javaid, Muhammad Yasar

Publication type:

Article

Construction of Operational Data-Driven Power Curve of a Generator by Industry 4.0 Data Analytics.

Published in:

Energies (19961073), 2021, v. 14, n. 5, p. 1227, doi. 10.3390/en14051227

By:

Ashraf, Waqar Muhammad;
Uddin, Ghulam Moeen;
Farooq, Muhammad;
Riaz, Fahid;
Ahmad, Hassan Afroze;
Kamal, Ahmad Hassan;
Anwar, Saqib;
El-Sherbeeny, Ahmed M.;
Khan, Muhammad Haider;
Hafeez, Noman;
Ali, Arman;
Samee, Abdul;
Naeem, Muhammad Ahmad;
Jamil, Ahsaan;
Hassan, Hafiz Ali;
Muneeb, Muhammad;
Chaudhary, Ijaz Ahmad;
Sosnowski, Marcin;
Krzywanski, Jaroslaw;
Delgado-Prieto, Miguel

Publication type:

Article

Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes.

Published in:

Energies (19961073), 2020, v. 13, n. 22, p. 6144, doi. 10.3390/en13226144

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Gupta, Munish Kumar;
Alfaify, Abdullah;
Hasnain, Saqib;
Jamil, Muhammad;
Mia, Mozammel;
Pimenov, Danil Yurievich

Publication type:

Article

Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes.

Published in:

Energies (19961073), 2020, v. 13, n. 21, p. 6144, doi. 10.3390/en13226144

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Gupta, Munish Kumar;
Alfaify, Abdullah;
Hasnain, Saqib;
Jamil, Muhammad;
Mia, Mozammel;
Pimenov, Danil Yurievich

Publication type:

Article

Performance Evaluation of a Direct Absorption Collector for Solar Thermal Energy Conversion.

Published in:

Energies (19961073), 2020, v. 13, n. 18, p. 4956, doi. 10.3390/en13184956

By:

Sattar, Abdul;
Farooq, Muhammad;
Amjad, Muhammad;
Saeed, Muhammad A.;
Nawaz, Saad;
Mujtaba, M.A.;
Anwar, Saqib;
El-Sherbeeny, Ahmed M.;
Soudagar, Manzoore Elahi M.;
Bandarra Filho, Enio P.;
Ali, Qasim;
Imran, Muhammad;
Pettinau, Alberto

Publication type:

Article

OBESITY: PREVALENCE AMONG BOYS IN PUBLIC AND PRIVATE SECONDARY SCHOOL CHILDREN.

Published in:

Professional Medical Journal, 2011, v. 18, n. 3, p. 489, doi. 10.29309/tpmj/2011.18.03.2375

By:

Qureshi, Farheen Umar;
Hussain, Jawad;
Saqib, Anwar Saood

Publication type:

Article

Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications.

Published in:

Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 7, p. 2963, doi. 10.1007/s11661-018-4625-0

By:

Islam, Mohammad;
Khalid, Yasir;
Ahmad, Iftikhar;
Almajid, Abdulhakim A.;
Achour, Amine;
Dunn, Theresa J.;
Akram, Aftab;
Anwar, Saqib

Publication type:

Article

Sustainable Microfabrication Enhancement of Graphene Nanoplatelet-Reinforced Biomedical Alumina Ceramic Matrix Nanocomposites.

Published in:

Nanomaterials (2079-4991), 2023, v. 13, n. 6, p. 1032, doi. 10.3390/nano13061032

By:

Nasr, Mustafa M.;
Anwar, Saqib;
Al-Samhan, Ali M.;
Alqahtani, Khaled N.;
Dabwan, Abdulmajeed;
Alhaag, Mohammed H.

Publication type:

Article

EDM of Ti-6Al-4V under Nano-Graphene Mixed Dielectric: A Detailed Investigation on Axial and Radial Dimensional Overcuts.

Published in:

Nanomaterials (2079-4991), 2022, v. 12, n. 3, p. 432, doi. 10.3390/nano12030432

By:

Ishfaq, Kashif;
Asad, Muhammad;
Harris, Muhammad;
Alfaify, Abdullah;
Anwar, Saqib;
Lamberti, Luciano;
Scutaru, Maria Luminita

Publication type:

Article

Genetic Algorithm-Based Optimization of Artificial Neural Network of Process Parameters and Characterization of Machining Errors in Graphene Mixed Dielectric.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 11, p. 15649, doi. 10.1007/s13369-024-09029-y

By:

Hurairah, Muhammad Abu;
Sana, Muhammad;
Farooq, Muhammad Umar;
Anwar, Saqib

Publication type:

Article

The potentiality of sinking EDM for micro-impressions on Ti-6Al-4V: keeping the geometrical errors (axial and radial) and other machining measures (tool erosion and work roughness) at minimum.

Published in:

Scientific Reports, 2019, v. 9, n. 1, p. N.PAG, doi. 10.1038/s41598-019-52855-6

By:

Ahmed, Naveed;
Anwar, Saqib;
Ishfaq, Kashif;
Rafaqat, Madiha;
Saleh, Mustafa;
Ahmad, Shafiq

Publication type:

Article

Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel.

Published in:

Metals (2075-4701), 2023, v. 13, n. 12, p. 1964, doi. 10.3390/met13121964

By:

Hassan, Abual;
Mushtaq, Ray Tahir;
Mashood Khan, Aqib;
Anwar, Saqib

Publication type:

Article

Multi-Response Optimization of Additively Manufactured Ti6Al4V Component Using Grey Relational Analysis Coupled with Entropy Weights.

Published in:

Metals (2075-4701), 2023, v. 13, n. 6, p. 1130, doi. 10.3390/met13061130

By:

Alqahtani, Khaled N.;
Dabwan, Abdulmajeed;
Abualsauod, Emad Hashiem;
Anwar, Saqib;
Al-Samhan, Ali M.;
Kaid, Husam

Publication type:

Article

Evaluating Surface Quality of Inconel 617 by Employing Deep Cryogenically Treated Electrodes in Surfactant-Added Dielectrics of Transformer Oil.

Published in:

Metals (2075-4701), 2023, v. 13, n. 6, p. 1092, doi. 10.3390/met13061092

By:

Ishfaq, Kashif;
Sana, Muhammad;
Mahmood, Muhammad Arif;
Anwar, Saqib;
Waseem, Muhammad Umair

Publication type:

Article

Novel Technique for Enhancing the Strength of Friction Stir Spot Welds through Dynamic Welding Parameters.

Published in:

Metals (2075-4701), 2021, v. 11, n. 2, p. 280, doi. 10.3390/met11020280

By:

Badwelan, Ahmed;
M. Al-Samhan, Ali;
Anwar, Saqib;
Hidri, Lotfi;
Morri, Alessandro;
Ceschini, Lorella;
Toschi, Stefania

Publication type:

Article

Rotary Friction Welding of Inconel 718 to Inconel 600.

Published in:

Metals (2075-4701), 2021, v. 11, n. 2, p. 244, doi. 10.3390/met11020244

By:

Rehman, Ateekh Ur;
Usmani, Yusuf;
Al-Samhan, Ali M.;
Anwar, Saqib;
Sato, Yutaka S.

Publication type:

Article

Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy.

Published in:

Metals (2075-4701), 2021, v. 11, n. 1, p. 159, doi. 10.3390/met11010159

By:

Rahman, M. Azizur;
Bhuiyan, Md Shahnewaz;
Sharma, Sourav;
Kamal, Mohammad Saeed;
Imtiaz, M. M. Musabbir;
Alfaify, Abdullah;
Nguyen, Trung-Thanh;
Khanna, Navneet;
Sharma, Shubham;
Gupta, Munish Kumar;
Anwar, Saqib;
Mia, Mozammel

Publication type:

Article

Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN 2 -Assisted Sustainable Machining of Ti-6Al-4V Alloy.

Published in:

Metals (2075-4701), 2021, v. 11, n. 1, p. 88, doi. 10.3390/met11010088

By:

Khan, Aqib Mashood;
Anwar, Saqib;
Jamil, Muhammad;
Nasr, Mustafa M.;
Gupta, Munish Kumar;
Saleh, Mustafa;
Ahmad, Shafiq;
Mia, Mozammel

Publication type:

Article

On the Effect of Electron Beam Melted Ti6Al4V Part Orientations during Milling.

Published in:

Metals (2075-4701), 2020, v. 10, n. 9, p. 1172, doi. 10.3390/met10091172

By:

Dabwan, Abdulmajeed;
Anwar, Saqib;
M. Al-Samhan, Ali;
M. Nasr, Mustafa

Publication type:

Article

Thermomechanical Simulations of Residual Stresses and Distortion in Electron Beam Melting with Experimental Validation for Ti-6Al-4V.

Published in:

Metals (2075-4701), 2020, v. 10, n. 9, p. 1151, doi. 10.3390/met10091151

By:

M. Abdullah, Fawaz;
Anwar, Saqib;
Al-Ahmari, Abdulrahman

Publication type:

Article

Optimization of the Effect of Laser Power Bed Fusion 3D Printing during the Milling Process Using Hybrid Artificial Neural Networks with Particle Swarm Optimization and Genetic Algorithms.

Published in:

Processes, 2023, v. 11, n. 10, p. 2892, doi. 10.3390/pr11102892

By:

Kaid, Husam;
Dabwan, Abdulmajeed;
Alqahtani, Khaled N.;
Abualsauod, Emad Hashiem;
Anwar, Saqib;
Al-Samhan, Ali M.;
AlFaify, Abdullah Yahia

Publication type:

Article

Using Nano-Fluids Minimum Quantity Lubrication (NF-MQL) to Improve Tool Wear Characteristics for Efficient Machining of CFRP/Ti6Al4V Aeronautical Structural Composite.

Published in:

Processes, 2023, v. 11, n. 5, p. 1540, doi. 10.3390/pr11051540

By:

Mughal, Kiran;
Mughal, Mohammad Pervez;
Farooq, Muhammad Umar;
Anwar, Saqib;
Ammarullah, Muhammad Imam

Publication type:

Article