Works matching AU Alsoufi, Mohammad S.

Results: 27

Dimensional Accuracy and Measurement Variability in CNC-Turned Parts Using Digital Vernier Calipers and Coordinate Measuring Machines Across Five Materials.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2728, doi. 10.3390/ma18122728

By:

Alsoufi, Mohammad S.;
Bawazeer, Saleh A.;
Alhazmi, Mohammed W.;
Hijji, Hasan H.;
Alhazmi, Hani;
Alqurashi, Hazzaa F.

Publication type:

Article

Correction: Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency.

Published in:

2025

By:

Alhazmi, Mohammed W.;
Alsoufi, Mohammad S.;
Bawazeer, Saleh A.;
Hijji, Hasan H.;
Alhazmi, Hani;
Alqurashi, Hazzaa F.

Publication type:

Correction Notice

Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency.

Published in:

Umm Al-Qura University Journal of Engineering & Architecture (Springer Nature), 2025, v. 16, n. 2, p. 290, doi. 10.1007/s43995-025-00107-2

By:

Alhazmi, Mohammed W.;
Alsoufi, Mohammad S.;
Bawazeer, Saleh A.;
Hijji, Hasan H.;
Alhazmi, Hani;
Alqurashi, Hazzaa F.

Publication type:

Article

Genetic Based Experimental Investigation on Finishing Characteristics of AlSiCp-MMC by Abrasive Flow Machining.

Published in:

International Journal of Engineering & Technology Innovation, 2020, v. 10, n. 4, p. 293, doi. 10.46604/ijeti.2020.4951

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.

Publication type:

Article

PTB7-based Organic Photodiodes: Compatibility of OXCBA as an Electron Acceptor.

Published in:

Journal of Electronic Materials, 2023, v. 52, n. 12, p. 8132, doi. 10.1007/s11664-023-10721-2

By:

Mohd Kamal, Muhammad Alif Ikmal;
Roslan, Nur Adilah;
Hisamuddin, Syaza Nafisah;
Alwi, Siti Anis Khairani;
Md Sabri, Amirul Ashraf;
Tam, Nguyen Minh;
Ahmad Ludin, Norasikin;
Bawazeer, Tahani M.;
Alsoufi, Mohammad S.;
Alsenany, Nourah;
Supangat, Azzuliani

Publication type:

Article

Probabilistic Analysis of Surface Integrity in CNC Turning: Influence of Thermal Conductivity and Hardness on Roughness and Waviness Distributions.

Published in:

Machines, 2025, v. 13, n. 5, p. 385, doi. 10.3390/machines13050385

By:

Alsoufi, Mohammad S.;
Bawazeer, Saleh A.

Publication type:

Article

Enhancing the Electrical Properties of Vertical OFETs Using a P(VDF-TrFE) Dielectric Layer.

Published in:

Journal of Electronic Materials, 2020, v. 49, n. 2, p. 1362, doi. 10.1007/s11664-019-07805-3

By:

Aziz, Fakhra;
Anuar, Afiq;
Ahmad, Zubair;
Roslan, Nur Adilah;
Makinudin, Abdullah Haaziq Ahmad;
Bawazeer, Tahani M.;
Alsenany, Nourah;
Alsoufi, Mohammad S.;
Supangat, Azzuliani

Publication type:

Article

Edge-on orientation of thermally evaporated metal phthalocyanines thin films for humidity sensing application.

Published in:

Journal of Materials Science: Materials in Electronics, 2024, v. 35, n. 7, p. 1, doi. 10.1007/s10854-024-12280-6

By:

Natashah, Fadlan Arif;
Hisamuddin, Syaza Nafisah;
Coffey, Aidan H.;
Zhu, Chenhui;
Bawazeer, Tahani M.;
Alsoufi, Mohammad S.;
Roslan, Nur Adilah;
Supangat, Azzuliani

Publication type:

Article

Organic nanostructure sensing layer developed by AAO template for the application in humidity sensors.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 3, p. 2382, doi. 10.1007/s10854-018-0511-1

By:

Andika, Rachmat;
Aziz, Fakhra;
Ahmad, Zubair;
Doris, Muhamad;
Fauzia, Vivi;
Bawazeer, Tahani M.;
Alsenany, Nourah;
Alsoufi, Mohammad S.;
Supangat, Azzuliani

Publication type:

Article

Municipal Solid Waste Characterization and Landfill Gas Generation in Kakia Landfill, Makkah.

Published in:

Sustainability (2071-1050), 2021, v. 13, n. 3, p. 1462, doi. 10.3390/su13031462

By:

Osra, Faisal A.;
Ozcan, Huseyin Kurtulus;
Alzahrani, Jaber S.;
Alsoufi, Mohammad S.

Publication type:

Article

Mathematical Modeling of Multiple Quality Characteristics of a Laser Microdrilling Process Used in Al7075/SiCp Metal Matrix Composite Using Genetic Programming.

Published in:

Modelling & Simulation in Engineering, 2019, p. 1, doi. 10.1155/2019/1024365

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.

Publication type:

Article

Mathematical Modelling of a Friction Stir Welding Process to Predict the Joint Strength of Two Dissimilar Aluminium Alloys Using Experimental Data and Genetic Programming.

Published in:

Modelling & Simulation in Engineering, 2018, p. 1, doi. 10.1155/2018/4183816

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.

Publication type:

Article

A New Approach for Failure Modes, Effects, and Criticality Analysis Using ExJ-PSI Model—A Case Study on Boiler System.

Published in:

Applied Sciences (2076-3417), 2022, v. 12, n. 22, p. 11419, doi. 10.3390/app122211419

By:

Patil, Suyog S.;
Bewoor, Anand K.;
Patil, Rajkumar B.;
Kumar, Ravinder;
Ongar, Bulbul;
Sarsenbayev, Yerlan;
PraveenKumar, Seepana;
Ibrahim, Ahmed Mohamed Mahmoud;
Alsoufi, Mohammad S.;
Elsheikh, Ammar

Publication type:

Article

APPLICATION OF QC TOOLS FOR CONTINUOUS IMPROVEMENT IN AN EXPENSIVE SEAT HARDFACING PROCESS USING TIG WELDING.

Published in:

International Journal for Quality Research, 2016, v. 10, n. 3, p. 641, doi. 10.18421/IJQR10.03-14

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.;
Irfan, Mohammed

Publication type:

Article

Organic humidity sensing film optimization by embedding inorganic nano-anatase TiO2 powder.

Published in:

Applied Physics A: Materials Science & Processing, 2018, v. 124, n. 7, p. 1, doi. 10.1007/s00339-018-1924-7

By:

Azmer, Mohamad Izzat;
Zafar, Qayyum;
Qadir, Karwan Wasman;
Sulaiman, Khaulah;
Bawazeer, Tahani M.;
Alsoufi, Mohammad S.

Publication type:

Article

Experimental Investigations into the Mechanical, Tribological, and Corrosion Properties of Hybrid Polymer Matrix Composites Comprising Ceramic Reinforcement for Biomedical Applications.

Published in:

International Journal of Biomaterials, 2018, p. 1, doi. 10.1155/2018/9283291

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.

Publication type:

Article

Performance Assessment and Chip Morphology Evaluation of Austenitic Stainless Steel under Sustainable Machining Conditions.

Published in:

Metals (2075-4701), 2021, v. 11, n. 12, p. 1931, doi. 10.3390/met11121931

By:

Das, Anshuman;
Padhan, Smita;
Das, Sudhansu Ranjan;
Alsoufi, Mohammad S.;
Ibrahim, Ahmed Mohamed Mahmoud;
Elsheikh, Ammar

Publication type:

Article

Multi-objective optimizations of mechanical characteristics of objects in computer aided SIS manufacturing process using empirical PSO algorithm.

Published in:

Romanian Journal of Information Technology & Automatic Control / Revista Română de Informatică și Automatică, 2020, v. 30, n. 3, p. 23, doi. 10.33436/v30i3y202002

By:

YUNUS, Mohammed;
ALSOUFI, Mohammad S.

Publication type:

Article

Template-assisted humidity sensors based on PFO-DBT nanotubes: fabrication and characterization.

Published in:

Optical & Quantum Electronics, 2022, v. 54, n. 7, p. 1, doi. 10.1007/s11082-022-03693-w

By:

Fakir, Muhamad Saipul;
Supangat, Azzuliani;
Sulaiman, Khaulah;
Muhammadsharif, Fahmi F.;
Alsoufi, Mohammad S.;
Bawazeer, Tahani M.

Publication type:

Article

Dicarbocyanine Dye-Based Organic Photodiodes.

Published in:

Photonics, 2022, v. 9, n. 12, p. 947, doi. 10.3390/photonics9120947

By:

Md Sabri, Amirul Ashraf;
Natashah, Fadlan Arif;
Hisamuddin, Syaza Nafisah;
Roslan, Nur Adilah;
Bawazeer, Tahani M.;
Alsoufi, Mohammad S.;
Supangat, Azzuliani

Publication type:

Article

Environmental and economic sustainability in the Hajj system.

Published in:

Arabian Journal of Geosciences, 2021, v. 14, n. 20, p. 1, doi. 10.1007/s12517-021-08533-x

By:

Osra, Faisal Abdulrhman;
Alzahrani, Jaber S.;
Alsoufi, Mohammad S.;
Osra, Oumr Adnan;
Mirza, Agha Zeeshan

Publication type:

Article

Extended Finite Element Numerical Analysis of Scale Effect in Notched Glass Fiber Reinforced Epoxy Composite / Rozszerzona Analiza Numeryczna Metoda Elementów Skonczonych Efektu Skali W Epoksydowym Kompozycie Z Karbem Wzmocnionym Włóknem Szklanym

Published in:

Archive of Mechanical Engineering, 2015, v. 62, n. 2, p. 217, doi. 10.1515/meceng-2015-0013

By:

Abdellah, Mohammed Y.;
Alsoufi, Mohammad S.;
Hassan, Mohamed K.;
Ghulman, Hamza A.;
Mohamed, Ahmed F.

Publication type:

Article

In Vitro Degradability, Microstructural Evaluation, and Biocompatibility of Zn-Ti-Cu-Ca-P Alloy.

Published in:

Nanomaterials (2079-4991), 2022, v. 12, n. 8, p. N.PAG, doi. 10.3390/nano12081357

By:

Gopal, Navaneethakrishnan;
Palaniyandi, Parameswaran;
Ramasamy, Palanisamy;
Panchal, Hitesh;
Ibrahim, Ahmed Mohamed Mahmoud;
Alsoufi, Mohammad S.;
Elsheikh, Ammar H.

Publication type:

Article

Naphthalocyanine-Based NIR Organic Photodiode: Understanding the Role of Different Types of Fullerenes.

Published in:

Micromachines, 2021, v. 12, n. 11, p. 1383, doi. 10.3390/mi12111383

By:

Alwi, Siti Anis Khairani;
Hisamuddin, Syaza Nafisah;
Abdullah, Shahino Mah;
Anuar, Afiq;
Abdul Rahim, Atiqah Husna;
Majid, Siti Rohana;
Bawazeer, Tahani M.;
Alsoufi, Mohammad S.;
Alsenany, Nourah;
Supangat, Azzuliani

Publication type:

Article

Predictive Modeling of Surface Integrity and Material Removal Rate in Computer Numerical Control Machining: Effects of Thermal Conductivity and Hardness.

Published in:

Materials (1996-1944), 2025, v. 18, n. 7, p. 1557, doi. 10.3390/ma18071557

By:

Alsoufi, Mohammad S.;
Bawazeer, Saleh A.

Publication type:

Article

Machinability Investigation of Nitronic 60 Steel Turning Using SiAlON Ceramic Tools under Different Cooling/Lubrication Conditions.

Published in:

Materials (1996-1944), 2022, v. 15, n. 7, p. 2368, doi. 10.3390/ma15072368

By:

Padhan, Smita;
Das, Sudhansu Ranjan;
Das, Anshuman;
Alsoufi, Mohammad S.;
Ibrahim, Ahmed Mohamed Mahmoud;
Elsheikh, Ammar

Publication type:

Article

Characterization of Thermally Sprayed Coated GT Components Made of 3D Printing Based Selective Laser Melting Processed Inconel Alloy 718.

Published in:

International Journal of Aerospace Engineering, 2021, p. 1, doi. 10.1155/2021/2791386

By:

Yunus, Mohammed;
Alsoufi, Mohammad S.

Publication type:

Article

Works matching AU Alsoufi, Mohammad S.

Dimensional Accuracy and Measurement Variability in CNC-Turned Parts Using Digital Vernier Calipers and Coordinate Measuring Machines Across Five Materials.

Correction: Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency.

Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency.

Genetic Based Experimental Investigation on Finishing Characteristics of AlSiC<sub>p</sub>-MMC by Abrasive Flow Machining.

PTB7-based Organic Photodiodes: Compatibility of OXCBA as an Electron Acceptor.

Probabilistic Analysis of Surface Integrity in CNC Turning: Influence of Thermal Conductivity and Hardness on Roughness and Waviness Distributions.

Enhancing the Electrical Properties of Vertical OFETs Using a P(VDF-TrFE) Dielectric Layer.

Edge-on orientation of thermally evaporated metal phthalocyanines thin films for humidity sensing application.

Organic nanostructure sensing layer developed by AAO template for the application in humidity sensors.

Municipal Solid Waste Characterization and Landfill Gas Generation in Kakia Landfill, Makkah.

Mathematical Modeling of Multiple Quality Characteristics of a Laser Microdrilling Process Used in Al7075/SiC<sub>p</sub> Metal Matrix Composite Using Genetic Programming.

Mathematical Modelling of a Friction Stir Welding Process to Predict the Joint Strength of Two Dissimilar Aluminium Alloys Using Experimental Data and Genetic Programming.

A New Approach for Failure Modes, Effects, and Criticality Analysis Using ExJ-PSI Model—A Case Study on Boiler System.

APPLICATION OF QC TOOLS FOR CONTINUOUS IMPROVEMENT IN AN EXPENSIVE SEAT HARDFACING PROCESS USING TIG WELDING.

Organic humidity sensing film optimization by embedding inorganic nano-anatase TiO<sub>2</sub> powder.

Experimental Investigations into the Mechanical, Tribological, and Corrosion Properties of Hybrid Polymer Matrix Composites Comprising Ceramic Reinforcement for Biomedical Applications.

Performance Assessment and Chip Morphology Evaluation of Austenitic Stainless Steel under Sustainable Machining Conditions.

Multi-objective optimizations of mechanical characteristics of objects in computer aided SIS manufacturing process using empirical PSO algorithm.

Template-assisted humidity sensors based on PFO-DBT nanotubes: fabrication and characterization.

Dicarbocyanine Dye-Based Organic Photodiodes.

Environmental and economic sustainability in the Hajj system.

Extended Finite Element Numerical Analysis of Scale Effect in Notched Glass Fiber Reinforced Epoxy Composite / Rozszerzona Analiza Numeryczna Metoda Elementów Skonczonych Efektu Skali W Epoksydowym Kompozycie Z Karbem Wzmocnionym Włóknem Szklanym

In Vitro Degradability, Microstructural Evaluation, and Biocompatibility of Zn-Ti-Cu-Ca-P Alloy.

Naphthalocyanine-Based NIR Organic Photodiode: Understanding the Role of Different Types of Fullerenes.

Predictive Modeling of Surface Integrity and Material Removal Rate in Computer Numerical Control Machining: Effects of Thermal Conductivity and Hardness.

Machinability Investigation of Nitronic 60 Steel Turning Using SiAlON Ceramic Tools under Different Cooling/Lubrication Conditions.

Characterization of Thermally Sprayed Coated GT Components Made of 3D Printing Based Selective Laser Melting Processed Inconel Alloy 718.