Works matching DE "MASS transfer"

Results: 5000

Enhancing the Thermal Conductivity of the Heat Exchanger in a Noncompressive System as a Means of Energy Efficiency Improvement of the System.

Published in:

International Journal of Green Energy, 2009, v. 6, n. 5, p. 490, doi. 10.1080/15435070903228100

By:

Wu, Chia-Hsin;
Hsu, Shih-Hong;
Chu, RichardQ.;
Chen, Mai-Tzu;
Chung, Tsair-Wang

Publication type:

Article

Energy Consumption and Feasibility Study of a Hybrid Desiccant Dehumidification Air Conditioning System in Beirut.

Published in:

International Journal of Green Energy, 2008, v. 5, n. 5, p. 360, doi. 10.1080/15435070802414280

By:

Ghali, K.;
Othmani, M.;
Ghaddar, N.

Publication type:

Article

Investigation on Methanol Steam Reforming in a Microchannel Reactor by Experiments and Mathematical Model Analysis.

Published in:

International Journal of Green Energy, 2008, v. 5, n. 4, p. 281, doi. 10.1080/15435070802229209

By:

Xinhai Yu;
Shan-Tung;
Wang Zhendong;
Huang Huajiang

Publication type:

Article

The Performance Analysis of a Multi-Duct Proton Exchange Membrane Fuel Cell Cathode.

Published in:

International Journal of Green Energy, 2008, v. 5, n. 1/2, p. 35, doi. 10.1080/15435070701839413

By:

Patel, Siddharth;
Bansode, A.S.;
Sundararajan, T.;
Das, Sarit Kumar

Publication type:

Article

Theoretical and Experimental Investigation of a Two-Bed Adsorption System Using a Novel Adsorber Configuration.

Published in:

International Journal of Green Energy, 2007, v. 4, n. 2, p. 119, doi. 10.1080/15435070701193167

By:

Boukhanouf, R.;
Riffat, S.

Publication type:

Article

Evaporative Cooling of Water in a Small Vessel Under Varying Ambient Humidity.

Published in:

International Journal of Green Energy, 2006, v. 3, n. 4, p. 347, doi. 10.1080/01971520600704654

By:

Mittal, Ashutosh;
Kataria, Tarun;
Das, GautamK.;
Chatterjee, SiddharthG.

Publication type:

Article

Two-Phase Transport Model for the Pyrolysis Process of a Vertical Wood Cylinder, Including the Surrounding Flow Field.

Published in:

International Journal of Green Energy, 2006, v. 3, n. 1, p. 63, doi. 10.1080/01971520500439518

By:

Sand, U.;
Sandberg, J.;
Bel Fdhila, R.

Publication type:

Article

Principles of Bound Solute Dialysis.

Published in:

Therapeutic Apheresis & Dialysis, 2006, v. 10, n. 2, p. 118, doi. 10.1111/j.1744-9987.2006.00352.x

By:

Patzer, John

Publication type:

Article

Ozonated water for photoresist removal.

Published in:

Solid State Technology, 1999, v. 42, n. 7, p. 107

By:

Nelson, Steve

Publication type:

Article

Kinetics Study on the Leaching of Metallic Silver with Ammonium Carbonate as an Eco-Friendly Alternative for Cyanide.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 7, p. 5622, doi. 10.1007/s11837-025-07424-w

By:

Aydogan, Salih;
Abdelraheem, Mohamed Taha Osman;
Ali, Babiker;
Boyrazli, Mustafa

Publication type:

Article

Suspension Magnetization Roasting Kinetics and Microstructural Evolution of Hematite in CO-CO2 Atmosphere.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 7, p. 5269, doi. 10.1007/s11837-025-07309-y

By:

Yu, Jianwen;
Sun, Hao;
Sun, Xuesong;
Li, Peiyu;
Li, Yanjun;
Han, Yuexin

Publication type:

Article

Study on the Influence of the Flow Factor on the Performance of Vanadium Redox Flow Batteries: Study on the Influence of the Flow Factor on the Performance of Vanadium Redox Flow Batteries: Ispas-Gil, Zulueta, Olarte, Lopez-Guede, and Sanchez-Díez.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 5, p. 2932, doi. 10.1007/s11837-025-07287-1

By:

Ispas-Gil, Decebal Aitor;
Zulueta, Ekaitz;
Olarte, Javier;
Lopez-Guede, Jose Manuel;
Sanchez-Díez, Eduardo

Publication type:

Article

Physical Modeling of Liquid–Liquid Mass Transfer for Double-Tuyere in a Bottom Gas-Stirring Ladle: Physical Modeling of Liquid–Liquid Mass Transfer for Double-Tuyere in a Bottom Gas-Stirring Ladle: Ji, Niu, Yue, and Conejo.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 5, p. 3815, doi. 10.1007/s11837-025-07256-8

By:

Ji, Sha;
Niu, Kaijun;
Yue, Qiang;
Conejo, Alberto N.

Publication type:

Article

Application of 3D Printing Technology in Microreactor Fabrication: Application of 3D Printing Technology in Microreactor Fabrication: Zheng, Niu, Song, Li, and Ju.

Published in:

2025

By:

Zheng, Jinhao;
Niu, Yifan;
Song, Ziyu;
Li, Na;
Ju, Shaohua

Publication type:

Literature Review

Effect of Orifice Position on Bubble Aggregation and Coalescence in Dynamic Rotating Flow.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 12, p. 6934, doi. 10.1007/s11837-024-06501-w

By:

Wang, Lianyu;
Liu, Xiaoming;
Wang, Qiang;
Zhao, Chenglin;
Liu, Kun;
Feng, Lianghua

Publication type:

Article

Fluidized Processing of Surface Engineering of Metallic Components: Problems Encountered and Effects on Design.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 4, p. 2079, doi. 10.1007/s11837-024-06410-y

By:

Doheim, Mohammed A.

Publication type:

Article

Dynamic Basic Oxygen Steelmaking Process and Its Industry Validation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 9, p. 3890, doi. 10.1007/s11837-023-06003-1

By:

Singha, Prasenjit;
Shukla, Ajay Kumar

Publication type:

Article

Numerical Simulation and Experimental Study of Shear-Enhanced Goethite Process for Iron Removal.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 9, p. 4024, doi. 10.1007/s11837-023-05933-0

By:

Nan, Tianxiang;
Yang, Jianguang;
Zeng, Weizhi;
Zhu, Qiang;
Tang, Shiyang;
Tang, Chaobo;
Lundström, Mari

Publication type:

Article

Mechanism Analysis of Electrochemical Micro-machining Behavior Assisted by Magnetic Field with Local Magnetic Induction Lines Deformation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 9, p. 3249, doi. 10.1007/s11837-023-05798-3

By:

Pang, Guibing;
Cao, Xudong;
Zhang, Jingang;
Wang, Sifan;
Lin, Ben;
Li, Mingying;
Wang, Manfu;
Zhang, Zhihua

Publication type:

Article

Investigation of Fluoride Evaporation from CaF2-CaO-Al2O3-MgO-TiO2-(Na2O) Slag for Electroslag Remelting.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2265, doi. 10.1007/s11837-023-05859-7

By:

Ju, Jiantao;
Gu, Yue;
He, Kun;
Zhang, Qiming;
Cao, Haibo

Publication type:

Article

A Mathematical Model for Straight-Grate Iron Oxide Pellet Induration Furnace: Formulation, Plant Scale Validation, Implementation and Control.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2406, doi. 10.1007/s11837-023-05819-1

By:

Dave, Sagar;
Patra, Satyananda;
Bapat, Yogesh;
Banerjee, Gautam;
Chattopadhyay, Sirshendu

Publication type:

Article

Effect of Nonequilibrium Decarburization on Inclusion Transfer During Single Snorkel RH Vacuum Refining.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 4, p. 1578, doi. 10.1007/s11837-022-05182-7

By:

Chen, Shifu;
Lei, Hong;
Li, Qiang;
Ding, Changyou;
Dou, Weixue;
Chang, Lishan

Publication type:

Article

Improving Sintering Performance of Limonitic Nickel Laterite and Reducing Carbon Emissions via the Pellet-Sintering Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 4, p. 1807, doi. 10.1007/s11837-022-05176-5

By:

Xue, Yuxiao;
Zhu, Deqing;
Pan, Jian;
Guo, Zhengqi;
Li, Gen;
Pan, Liaoting;
Huang, Xuezhong

Publication type:

Article

Flow Accelerated Corrosion of Stainless Steel 316L by a Rotating Disk in Lead-Bismuth Eutectic Melt.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4030, doi. 10.1007/s11837-021-04953-y

By:

Choi, Jaewon;
Hwang, Ilsoon;
Lee, Youho

Publication type:

Article

Leveraging Neutronics to Monitor Mass Transfer Corrosion in Lead and Lead-Bismuth Cooled Reactors.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4051, doi. 10.1007/s11837-021-04951-0

By:

Talaat, Khaled;
Anderoglu, Osman

Publication type:

Article

Investigation on Three-Dimensional Morphology of Channel-Type Macrosegregation in DC Cast Al-Mg Billets Through Numerical Simulation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 3838, doi. 10.1007/s11837-021-04906-5

By:

Yamamoto, Takuya;
Kamiya, Keisuke;
Kubo, Takashi;
Tsunekawa, Masanori;
Komarov, Sergey V.

Publication type:

Article

Modeling and Simulation of Goethite Process for Removal of Iron from Zinc Leaching Solution.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 6, p. 1661, doi. 10.1007/s11837-021-04593-2

By:

Nan, Tianxiang;
Yang, Jianguang;
Zeng, Weizhi;
Tang, Chaobo;
Hu, Qingcheng

Publication type:

Article

Evaluation and Modeling of Scrap Utilization in the Steelmaking Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 2, p. 712, doi. 10.1007/s11837-020-04529-2

By:

Gao, Ming;
Gao, Jin Tao;
Zhang, Yan Ling;
Yang, Shu Feng

Publication type:

Article

Mass Transfer Study of a Batch Aluminum Degassing Ladle with Multiple Designs of Rotating Impellers.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 12, p. 2958, doi. 10.1007/s11837-018-3147-y

By:

Abreu-López, Diego;
Ramírez-Argáez, Marco A.;
Dutta, Abhishek;
Camacho-Martínez, José Luis;
Trápaga-Martínez, Gerardo

Publication type:

Article

Numerical Modeling of Liquid-Liquid Mass Transfer and the Influence of Mixing in Gas-Stirred Ladles.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 2109, doi. 10.1007/s11837-018-3056-0

By:

Hoang, Quynh N.;
Dutta, Abhishek;
Ramírez-Argáez, Marco A.;
Conejo, Alberto N.;
Blanpain, Bart

Publication type:

Article

Quantitative and Qualitative Aspects of Gas-Metal-Oxide Mass Transfer in High-Temperature Confocal Scanning Laser Microscopy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 7, p. 1193, doi. 10.1007/s11837-018-2875-3

By:

Pistorius, P. Chris;
Webler, Bryan A.;
Piva, Stephano P. T.

Publication type:

Article

Fundamentals of Liquid Processing in Low Earth Orbit: From Thermophysical Properties to Microstructure Formation in Metallic Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 8, p. 1261, doi. 10.1007/s11837-017-2417-4

By:

Fecht, Hans-Jörg;
Wunderlich, Rainer

Publication type:

Article

Reduction of Nickel Oxide with Ethanol.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 6, p. 987, doi. 10.1007/s11837-017-2292-z

By:

Coskun, F.;
Cetinkaya, S.;
Eroglu, S.

Publication type:

Article

Use of Gases in Pyrometallurgy.

Published in:

2017

By:

Gregurek, Dean;
Peng, Zhiwei;
Wenzl, Christine;
White, Jesse

Publication type:

Editorial

Mass Transfer Model for the De-oxidation of Molten Copper.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 6, p. 980, doi. 10.1007/s11837-017-2356-0

By:

Díaz-Damacillo, Lamberto;
Reyes, Fidel;
Ingalls, Alberto;
Méndez, Claudio;
Plascencia, Gabriel

Publication type:

Article

Stability of Interfacial Phase Growth in a Slab with Convective Boundary Conditions.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 6, p. 1679, doi. 10.1007/s11837-016-1909-y

By:

Basu, Rahul

Publication type:

Article

On the Development of a Zinc Vapor Condensation Process for the Solar Carbothermal Reduction of Zinc Oxide.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2015, v. 67, n. 5, p. 1096, doi. 10.1007/s11837-015-1356-1

By:

Tzouganatos, N.;
Dell'amico, M.;
Wieckert, C.;
Hinkley, J.;
Steinfeld, A.

Publication type:

Article

Gas-Alloy Interactions at Elevated Temperatures.

Published in:

2012

By:

Arroyave, Raymundo;
Gao, Michael

Publication type:

Editorial

Mass transport control of localised corrosion processes: in situ local probing and modelling.

Published in:

Corrosion Engineering, Science & Technology, 2018, v. 53, p. 2, doi. 10.1080/1478422X.2017.1374051

By:

Oltra, Roland

Publication type:

Article

New method for calculating charge density in electrochemical systems.

Published in:

Corrosion Engineering, Science & Technology, 2006, v. 41, n. 2, p. 110, doi. 10.1179/174327806X94054

By:

Heppner, K. L.;
Evitts, R. W.

Publication type:

Article

3D network model of NO transport in tissue.

Published in:

Medical & Biological Engineering & Computing, 2011, v. 49, n. 6, p. 633, doi. 10.1007/s11517-011-0758-7

By:

Chen, Xuewen;
Buerk, Donald;
Barbee, Kenneth;
Kirby, Patrick;
Jaron, Dov

Publication type:

Article

Comparison of the mass transfer in totally porous and superficially porous stationary phases in liquid chromatography.

Published in:

Analytical & Bioanalytical Chemistry, 2010, v. 397, n. 3, p. 1307, doi. 10.1007/s00216-010-3627-6

By:

Kiss, Ibolya;
Bacskay, Ivett;
Kilár, Ferenc;
Felinger, Attila

Publication type:

Article

Molecularly imprinted monolith in-tube solid-phase microextraction coupled with HPLC/UV detection for determination of 8-hydroxy-2′-deoxyguanosine in urine.

Published in:

Analytical & Bioanalytical Chemistry, 2009, v. 395, n. 2, p. 479, doi. 10.1007/s00216-009-2964-9

By:

Shao-Wen Zhang;
Jun Xing;
Ling-Shuang Cai;
Cai-Ying Wu

Publication type:

Article

Extraction across supported liquid membranes by use of electrical fields.

Published in:

Analytical & Bioanalytical Chemistry, 2007, v. 388, n. 3, p. 521, doi. 10.1007/s00216-007-1142-1

By:

Pedersen-Bjergaard, Stig;
Einar Rasmussen, Knut

Publication type:

Article

Preliminary studies of using preheated carrier gas for on-line membrane extraction of semivolatile organic compounds.

Published in:

Analytical & Bioanalytical Chemistry, 2007, v. 387, n. 7, p. 2517, doi. 10.1007/s00216-007-1120-7

By:

Xinyu Liu;
Pawliszyn, Janusz

Publication type:

Article

The use of nanoparticles in electroanalysis: a review.

Published in:

Analytical & Bioanalytical Chemistry, 2006, v. 384, n. 3, p. 601, doi. 10.1007/s00216-005-0230-3

By:

Welch, Christine M.;
Compton, Richard G.

Publication type:

Article

Monolayers of photosystem II on gold electrodes with enhanced sensor response-effect of porosity and protein layer arrangement.

Published in:

Analytical & Bioanalytical Chemistry, 2005, v. 381, n. 8, p. 1558, doi. 10.1007/s00216-005-3149-9

By:

Maly, J.;
Krejci, J.;
Ilie, M.;
Jakubka, L.;
Masojídek, J.;
Pilloton, R.;
Sameh, K.;
Steffan, P.;
Stryhal, Z.;
Sugiura, M.

Publication type:

Article

Dufour Effect on Transient MHD Double Convection Flow of Fractionalized Second-Grade Fluid with Caputo–Fabrizio Derivative.

Published in:

Complexity, 2021, p. 1, doi. 10.1155/2021/7625031

By:

Siddique, Imran;
Ayaz, Sehrish;
Jarad, Fahd

Publication type:

Article

Study on the Initiation Mechanism of Non‐Premixed Shock Induced Combustion in Supersonic Propellant Gas Jet.

Published in:

Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 10, p. 1302, doi. 10.1002/prep.201900119

By:

Qin, Qiongyao;
Zhang, Xiaobing

Publication type:

Article

Modelling of Al/MnO2 and Ti/MnO2 Thermite Mixtures.

Published in:

Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 6, p. 706, doi. 10.1002/prep.201800347

By:

Knapp, Sebastian;
Eisenreich, Norbert;
Kelzenberg, Stefan;
Roth, Evelin;
Weiser, Volker

Publication type:

Article