Works matching DE "DISPERSION strengthening"
Results: 386
Slip-casting properties of Si3N4 with Y2O3 and Al2O3 as sintering additives.
- Published in:
- Journal of Materials Science, 1998, v. 33, n. 7, p. 1881, doi. 10.1023/A:1004361506723
- By:
- Publication type:
- Article
Geometry-Based Statistical Model for the Temporal, Spectral, and Spatial Characteristics of the Land Mobile Channel.
- Published in:
- Wireless Personal Communications, 2015, v. 83, n. 1, p. 631, doi. 10.1007/s11277-015-2413-3
- By:
- Publication type:
- Article
Cr 含量及涂层厚度对超高速激光熔覆马氏体不锈钢涂层组织及耐蚀性能的影响.
- Published in:
- Nonferrous Metals Engineering, 2024, v. 14, n. 12, p. 177, doi. 10.3969/j.issn.2095-1744.2024.12.016
- By:
- Publication type:
- Article
Effect of Sc on Aging Precipitation Behavior and Strengthening of Cu-0. 65Cr Alloy.
- Published in:
- Nonferrous Metals Engineering, 2024, v. 14, n. 11, p. 41, doi. 10.3969/j.issn.2095-1744.2024.11.005
- By:
- Publication type:
- Article
Application of Sodium Aminophosphate in the High-efficiency Separation of Cariin-type Gold Deposits.
- Published in:
- Nonferrous Metals Engineering, 2024, v. 14, n. 6, p. 90, doi. 10.3969/j.issn.2095-1744.2024.06.12
- By:
- Publication type:
- Article
Wear Behavior of In-situ Fe<sub>3</sub>Al Based Mental-cermet Coating with (Cr, Fe)<sub>7</sub> C<sub>3</sub> Grains.
- Published in:
- Nonferrous Metals Engineering, 2022, v. 12, n. 10, p. 17, doi. 10.3969/j.issn.2095-1744.2022.10.003
- By:
- Publication type:
- Article
ОСОБЛИВОСТІ ФОРМУВАННЯ МІКРОСТРУКТУРИ ТА МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ МОДИФІКОВАНОЇ НАНОЧАСТИНКАМИ СТАЛІ 20, ОТРИМАНОЇ СПОСОБОМ ЕЛЕКТРОННО-ПРОМЕНЕВОЇ ПЛАВКИ.
- Published in:
- Electrometallurgy Today / Sovremennaya Elektrometallurgiya, 2022, n. 2, p. 50, doi. 10.37434/sem2022.02.07
- By:
- Publication type:
- Article
The Dissolution of Intermetallic Inclusions in Atomic Displacement Cascades during Neutron Irradiation of Dispersion-Hardening Alloys.
- Published in:
- Technical Physics Letters, 2001, v. 27, n. 3, p. 229, doi. 10.1134/1.1359836
- By:
- Publication type:
- Article
Effect of Poly (Propylene-g-maleic Anhydride) on the Morphological, Rheological, and Mechanical Properties of PP/HDPE Blend.
- Published in:
- Journal of Thermoplastic Composite Materials, 2009, v. 22, n. 5, p. 519, doi. 10.1177/0892705709100662
- By:
- Publication type:
- Article
Characteristics of complex oxides in Co based ODS alloys.
- Published in:
- Powder Metallurgy, 2013, v. 56, n. 1, p. 24, doi. 10.1179/1743290112Y.0000000017
- By:
- Publication type:
- Article
Characterisation of sintering of alumina matrix-stainless steel dispersion composite and interaction between chromium, carbon and alumina during powder metallurgy process.
- Published in:
- Powder Metallurgy, 2011, v. 54, n. 4, p. 522, doi. 10.1179/003258910X12740974839701
- By:
- Publication type:
- Article
Single press/single sinter solutions to high density.
- Published in:
- Powder Metallurgy, 2010, v. 53, n. 2, p. 100, doi. 10.1179/174329010X12737422260377
- By:
- Publication type:
- Article
Oxidation of mechanically alloyed powders during processing: origins and control.
- Published in:
- Powder Metallurgy, 2003, v. 46, n. 4, p. 319, doi. 10.1179/003258903225008562
- By:
- Publication type:
- Article
Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting.
- Published in:
- 2021
- By:
- Publication type:
- Report
Dispersion-strengthened silver.
- Published in:
- Advanced Materials & Processes, 2001, v. 159, n. 1, p. 75
- By:
- Publication type:
- Article
Effect of Ceramic Powder on the Performance of Composite Water-Soluble Salt Cores: Comparison of Experimental Data and Molecular Dynamics Simulation.
- Published in:
- International Journal of Metalcasting, 2024, v. 18, n. 1, p. 494, doi. 10.1007/s40962-023-01039-0
- By:
- Publication type:
- Article
Crucial Factors Influencing Mechanical and Thermal Properties of Cold-Sprayed CuCrZr Composite Coating.
- Published in:
- Journal of Thermal Spray Technology, 2025, v. 34, n. 1, p. 219, doi. 10.1007/s11666-024-01911-3
- By:
- Publication type:
- Article
Unveiling the Effect of Si on the Microstructure and Properties of AlFeCoCrNi High Entropy Alloy Coating.
- Published in:
- Journal of Thermal Spray Technology, 2023, v. 32, n. 7, p. 2250, doi. 10.1007/s11666-023-01629-8
- By:
- Publication type:
- Article
Residual Stress Generation in Laser-Assisted Cold Spray Deposition of Oxide Dispersion Strengthened Fe<sub>91</sub>Ni<sub>8</sub>Zr<sub>1</sub>.
- Published in:
- Journal of Thermal Spray Technology, 2020, v. 29, n. 6, p. 1550, doi. 10.1007/s11666-020-01079-6
- By:
- Publication type:
- Article
Morphology, Microstructure and Improved Mechanical Properties of TiB2/TiB/TiN Reinforced Ti3Al Matrix Composite Coating with ZrO2 Addition.
- Published in:
- Journal of Thermal Spray Technology, 2020, v. 29, n. 3, p. 510, doi. 10.1007/s11666-020-00986-y
- By:
- Publication type:
- Article
Investigation of Dispersion of Compression in Bottle-Shaped Struts.
- Published in:
- ACI Structural Journal, 2010, v. 107, n. 1, p. 124
- By:
- Publication type:
- Article
Strength, plasticity and brittleness of bulk metallic glasses under compression: statistical and geometric effects.
- Published in:
- Philosophical Magazine, 2008, v. 88, n. 1, p. 71, doi. 10.1080/14786430701762619
- By:
- Publication type:
- Article
Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging Part 1 – Processing parameters, mechanical properties and microstructure.
- Published in:
- Materials Science & Technology, 2007, v. 23, n. 5, p. 509, doi. 10.1179/174328407X166687
- By:
- Publication type:
- Article
Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour.
- Published in:
- Materials Science & Technology, 2004, v. 20, n. 5, p. 567, doi. 10.1179/026708304225016662
- By:
- Publication type:
- Article
Micro-Crack Bridging Effects on the Tensile and Compressive Strengths of CNT-Epoxy Composites.
- Published in:
- Mechanics of Composite Materials, 2022, v. 58, n. 4, p. 585, doi. 10.1007/s11029-022-10051-0
- By:
- Publication type:
- Article
Multiwall carbon nanotube/epoxy composites produced by a masterbatch process.
- Published in:
- Mechanics of Composite Materials, 2006, v. 42, n. 5, p. 395, doi. 10.1007/s11029-006-0050-3
- By:
- Publication type:
- Article
Strengthening mechanisms and wear behavior of electrodeposited Ni–SiC nanocomposite coatings.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 35, p. 16632, doi. 10.1007/s10853-022-07655-1
- By:
- Publication type:
- Article
9Cr–1W steel strengthened by AlN and BN dispersion.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 26, p. 12572, doi. 10.1007/s10853-022-07395-2
- By:
- Publication type:
- Article
A crystallographic study of the deformation mechanisms during small punch testing of 14wt%Cr oxide dispersion steel.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 25, p. 11969, doi. 10.1007/s10853-022-07337-y
- By:
- Publication type:
- Article
Formation, microstructure, and performance of laser-welded 6061 Al alloy joint with Ti<sub>3</sub>AlC<sub>2</sub> additive.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 19, p. 8978, doi. 10.1007/s10853-022-07244-2
- By:
- Publication type:
- Article
Efficient stabilization of Cu ions in phosphate glasses via reduction of Cu by Sn during ambient atmosphere melting.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 12, p. 4387, doi. 10.1007/s10853-014-8138-y
- By:
- Publication type:
- Article
Multi-Scale Characterization of 3D Printable Oxide-Dispersion-Strengthened MPEAs by Methods of Advanced Stereo-STEM Diffraction Contrast Imaging Cross-Correlated with Energy-Dispersive X-ray Spectroscopy.
- Published in:
- Microscopy & Microanalysis, 2024, v. 30, p. 1, doi. 10.1093/mam/ozae044.125
- By:
- Publication type:
- Article
Effect Forging Temperature and Backpressure on the Nature of Plastic Flow, Structure, and Mechanical Properties of Sintered Al–40 Sn Alloy.
- Published in:
- Russian Physics Journal, 2024, v. 67, n. 9, p. 1340, doi. 10.1007/s11182-024-03252-8
- By:
- Publication type:
- Article
Dispersion Hardening of V–Cr–W–ZrC Alloy During Plastic Deformation with BCC → HCP → BCC Transformation.
- Published in:
- Russian Physics Journal, 2023, v. 66, n. 9, p. 1017, doi. 10.1007/s11182-023-03038-4
- By:
- Publication type:
- Article
Microstructure of V-4Ti-4Cr Alloy After Deformation by Multi-Directional Pressing.
- Published in:
- Russian Physics Journal, 2023, v. 66, n. 7, p. 713, doi. 10.1007/s11182-023-02997-y
- By:
- Publication type:
- Article
The Influence of Processing Modes on Second-Phase Particles of Ferritic-Martensitic Steel EP-823.
- Published in:
- Russian Physics Journal, 2023, v. 66, n. 1, p. 74, doi. 10.1007/s11182-023-02907-2
- By:
- Publication type:
- Article
The Influence of Treatment Modes on Second-Phase Particles of Ferritic-Martensitic Steel EP-823.
- Published in:
- Russian Physics Journal, 2023, v. 65, n. 12, p. 2163, doi. 10.1007/s11182-023-02885-5
- By:
- Publication type:
- Article
Influence of Nanosized Incoherent Particles on Dislocation Annihilation in Heterophase Aluminum-Matrix Crystalline Alloys.
- Published in:
- Russian Physics Journal, 2022, v. 64, n. 10, p. 1893, doi. 10.1007/s11182-022-02538-z
- By:
- Publication type:
- Article
Influence of Thermal Treatment of Ti–45Nb Alloy in Ultrafine-Grained State on Its Structural Parameters and Heat Capacity.
- Published in:
- Russian Physics Journal, 2022, v. 64, n. 9, p. 1676, doi. 10.1007/s11182-022-02506-7
- By:
- Publication type:
- Article
Effect of Prolonged Thermal Exposure on Microstructure and Mechanical Properties of Zr – 1 wt.% Nb and Ti – 45 wt.% Nb Ultrafine-Grained Bioinert Alloys.
- Published in:
- Russian Physics Journal, 2021, v. 63, n. 11, p. 1846, doi. 10.1007/s11182-021-02242-4
- By:
- Publication type:
- Article
Structure Transformation of Dispersionstrengthened Vanadium Alloys under Conditions of High-Pressure Torsion and Room-Temperature Tensile Deformation.
- Published in:
- Russian Physics Journal, 2020, v. 63, n. 7, p. 1202, doi. 10.1007/s11182-020-02158-5
- By:
- Publication type:
- Article
Temperature Effect on Stress-Strain Properties of Dispersion-Hardened Crystalline Materials with Incoherent Nanoparticles.
- Published in:
- Russian Physics Journal, 2019, v. 61, n. 9, p. 1687, doi. 10.1007/s11182-018-1588-y
- By:
- Publication type:
- Article
Strengthening Particle Size Effect on Residual Stresses in Dispersion-Hardened Alloy.
- Published in:
- Russian Physics Journal, 2018, v. 61, n. 5, p. 962, doi. 10.1007/s11182-018-1484-5
- By:
- Publication type:
- Article
Strengthening mechanism and properties of Co–WC composite coatings deposited by plasma-transferred arc welding.
- Published in:
- Micro & Nano Letters (Wiley-Blackwell), 2019, v. 14, n. 7, p. 717, doi. 10.1049/mnl.2018.5545
- By:
- Publication type:
- Article
Study of phase formation mechanisms in composite xSi<sub>3</sub>N<sub>4</sub> - (1-x)ZrO<sub>2</sub> ceramics and their role in hardening of ceramics.
- Published in:
- International Journal of Mathematics & Physics, 2024, v. 15, n. 2, p. 23, doi. 10.26577/ijmph.2024v15i2b3
- By:
- Publication type:
- Article
Ultrahigh strength and toughness in W-Y<sub>2</sub>O<sub>3</sub> alloy with bimodal and lamellar structures.
- Published in:
- Materials Research Letters, 2023, v. 11, n. 6, p. 439, doi. 10.1080/21663831.2023.2181110
- By:
- Publication type:
- Article
A gradient theory based on the Aifantis theory using the Gurtin-Anand strain gradient plasticity approach.
- Published in:
- Journal of the Mechanical Behavior of Materials, 2018, v. 27, n. 3/4, p. N.PAG, doi. 10.1515/jmbm-2018-0012
- By:
- Publication type:
- Article
Simulating Ambient SO<sub>2</sub> Dispersion Patterns and Assessing their Health Risk in a Gas Refinery.
- Published in:
- Polish Journal of Environmental Studies, 2018, v. 27, n. 3, p. 1197, doi. 10.15244/pjoes/76176
- By:
- Publication type:
- Article
Achieving high strength and ductility in ODS-W alloy by employing oxide@W core-shell nanopowder as precursor.
- Published in:
- Nature Communications, 2021, v. 12, n. 1, p. 1, doi. 10.1038/s41467-021-25283-2
- By:
- Publication type:
- Article
ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability.
- Published in:
- Journal of Mechanical Science & Technology, 2015, v. 29, n. 7, p. 2793, doi. 10.1007/s12206-015-0608-x
- By:
- Publication type:
- Article