Temperature Field Measurement and Analyses of Friction Stir Welding of 18mm Thick 2219 Aluminum Alloy.
- Published in:
- Experimental Techniques, 2023, v. 47, n. 3, p. 579, doi. 10.1007/s40799-022-00556-7
- By:
- Publication type:
- Article
Works matching DE "FRICTION measurements"
Results: 156
1
2
Considerations on the Laboratory Measurement of the Basic Friction Angle of Planar Rock Surfaces/Effect of Testing Methods and Surface Polishing.
- Published in:
- Geotechnical & Geological Engineering, 2020, v. 38, n. 3, p. 2945, doi. 10.1007/s10706-020-01198-5
- By:
- Publication type:
- Article
3
Investigating Effects of Testing Parameters on Frictional Heating of UHMWPE by Taguchi Method.
- Published in:
- Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 571, doi. 10.12693/APhysPolA.125.571
- By:
- Publication type:
- Article
4
Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear.
- Published in:
- Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 101, doi. 10.12693/APhysPolA.125.481
- By:
- Publication type:
- Article
5
Influence of Load and Speed on Sliding Tribology of Silica-Polyamide Composites against AISI 4140 Steel.
- Published in:
- Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 478, doi. 10.12693/APhysPolA.125.478
- By:
- Publication type:
- Article
6
The Effect of Sliding Motion on Tribological Characteristics of PA6 and Zinc-Borate Reinforced PA6 Composites.
- Published in:
- Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 475, doi. 10.12693/APhysPolA.125.475
- By:
- Publication type:
- Article
7
AFM probe for measuring ∼10<sup>−5</sup> ultra-low friction coefficient: Design and application.
- Published in:
- Friction (2223-7704), 2024, v. 12, n. 1, p. 64, doi. 10.1007/s40544-022-0731-5
- By:
- Publication type:
- Article
8
On the relevance of analytical film thickness EHD equations for isothermal point contacts: Qualitative or quantitative predictions?
- Published in:
- Friction (2223-7704), 2016, v. 4, n. 4, p. 369, doi. 10.1007/s40544-016-0133-7
- By:
- Publication type:
- Article
9
Investigation of friction characteristics of control cables.
- Published in:
- Sigma: Journal of Engineering & Natural Sciences / Mühendislik ve Fen Bilimleri Dergisi, 2022, v. 40, n. 3, p. 507, doi. 10.14744/sigma.2022.00054
- By:
- Publication type:
- Article
10
Frictional effects on shear-induced diffusion in suspensions of non-Brownian particles.
- Published in:
- Journal of Fluid Mechanics, 2025, v. 1003, p. 1, doi. 10.1017/jfm.2024.1121
- By:
- Publication type:
- Article
11
Frontmatter.
- Published in:
- Journal of Polymer Engineering, 2019, v. 39, n. 9, p. i, doi. 10.1515/polyeng-2019-frontmatter9
- Publication type:
- Article
12
Surface damage characterization of photodegraded low-density polyethylene by means of friction measurements.
- Published in:
- Journal of Polymer Engineering, 2019, v. 39, n. 9, p. 805, doi. 10.1515/polyeng-2019-0071
- By:
- Publication type:
- Article
13
ON HOMOGENEOUS-HETEROGENEOUS REACTIONS IN OBLIQUE STAGNATION-POINT FLOW OF JEFFREY FLUID INVOLVING CATTANEO-CHRISTOV HEAT FLUX.
- Published in:
- Thermal Science, 2021, v. 25, p. S165, doi. 10.2298/TSCI21S2165R
- By:
- Publication type:
- Article
14
EXPERIMENTAL RESEARCH OF PRESSURE DROP IN PACKED BEDS OF MONOSIZED SPHERES A NOVEL CORRELATION FOR PRESSURE DROP CALCULATION.
- Published in:
- Thermal Science, 2017, p. S717, doi. 10.2298/TSCI161025327S
- By:
- Publication type:
- Article
15
Frictional characterization of injectable hyaluronic acids is more predictive of clinical outcomes than traditional rheological or viscoelastic characterization.
- Published in:
- PLoS ONE, 2019, v. 14, n. 5, p. 1, doi. 10.1371/journal.pone.0216702
- By:
- Publication type:
- Article
16
A field assessment of floor slipperiness in a student cafeteria.
- Published in:
- International Journal of Injury Control & Safety Promotion, 2013, v. 20, n. 3, p. 245, doi. 10.1080/17457300.2012.686920
- By:
- Publication type:
- Article
17
Effects of illite content on frictional properties of experimental carbonate faults.
- Published in:
- Geophysical Research Abstracts, 2019, v. 21, p. 1
- By:
- Publication type:
- Article
18
Synthesis and Characterization of 1-Hydroxy-5-Methyltetrazole and Its Energetic Salts.
- Published in:
- Molecules, 2025, v. 30, n. 13, p. 2766, doi. 10.3390/molecules30132766
- By:
- Publication type:
- Article
19
船用低速机关键摩擦副建模分析与摩擦力 无线测量验证.
- Published in:
- China Mechanical Engineering, 2022, v. 33, n. 4, p. 380, doi. 10.3969/j.issn.1004-132X.2022.04.001
- By:
- Publication type:
- Article
20
石墨水润滑动压推力轴承的起飞转速及 磨损的量化研究.
- Published in:
- China Mechanical Engineering, 2021, v. 32, n. 3, p. 269, doi. 10.3969/j.issn.1004-132X.2021j3.003
- By:
- Publication type:
- Article
21
Design and Corrosion Resistance Performance of Nano-Multilayer Coatings for the Protection of Breathing Gas Cylinders Used in Diving.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1435, doi. 10.3390/coatings14111435
- By:
- Publication type:
- Article
22
Possibilities of Using the Duplex System Plasma Nitriding + CrN Coating for Special Components.
- Published in:
- Coatings (2079-6412), 2022, v. 12, n. 12, p. 1953, doi. 10.3390/coatings12121953
- By:
- Publication type:
- Article
23
Perspectives of the Friction Mechanism of Hydrogenated Diamond-Like Carbon Film in Air by Varying Sliding Velocity.
- Published in:
- Coatings (2079-6412), 2018, v. 8, n. 10, p. 331, doi. 10.3390/coatings8100331
- By:
- Publication type:
- Article
24
Disturbance Recognition and Collision Detection of Manipulator Based on Momentum Observer.
- Published in:
- 2020
- By:
- Publication type:
- Letter
25
A Micro-Force Sensor with Slotted-Quad-Beam Structure for Measuring the Friction in MEMS Bearings.
- Published in:
- Sensors (14248220), 2013, v. 13, n. 10, p. 13178, doi. 10.3390/s131013178
- By:
- Publication type:
- Article
26
Measurements of Friction and Wear of the Powder Composite Materials Using a Pin-On-Disc Mechanism.
- Published in:
- Refractories & Industrial Ceramics, 2021, v. 61, n. 5, p. 540, doi. 10.1007/s11148-021-00517-4
- By:
- Publication type:
- Article
27
基于断层摩擦强度的地应力计算模型.
- Published in:
- Journal of Engineering Geology / Gongcheng Dizhi Xuebao, 2017, v. 25, n. 2, p. 504, doi. 10.13544/j.cnki.jeg.2017.02.030
- By:
- Publication type:
- Article
28
五星形桩抗拔承载性能模型试验研究.
- Published in:
- Journal of Engineering Geology / Gongcheng Dizhi Xuebao, 2017, v. 25, n. 1, p. 58, doi. 10.13544/j.cnki.jeg.2017.01.008
- By:
- Publication type:
- Article
29
Evaluation of the coefficient of friction of rail in the field and laboratory using several devices.
- Published in:
- Tribology: Materials, Surfaces & Interfaces, 2020, v. 14, n. 2, p. 119, doi. 10.1080/17515831.2020.1712111
- By:
- Publication type:
- Article
30
Human-Like Gait Adaptation to Slippery Surfaces for the NAO Robot Wearing Instrumented Shoes.
- Published in:
- International Journal of Humanoid Robotics, 2020, v. 17, n. 3, p. N.PAG, doi. 10.1142/S0219843620500073
- By:
- Publication type:
- Article
31
ABOUT TIRE -RUNWAY FRICTION MEASUREMENTS.
- Published in:
- TEHNOMUS, 2023, p. 66
- By:
- Publication type:
- Article
32
Characteristics of tribo-oxidation surface evolution in molybdenum–tungsten–vanadium hot-work die steel.
- Published in:
- Journal of Mechanical Science & Technology, 2024, v. 38, n. 8, p. 4097, doi. 10.1007/s12206-024-0618-7
- By:
- Publication type:
- Article
33
A novel sensor using photo-interrupter for measuring static friction coefficient.
- Published in:
- Journal of Mechanical Science & Technology, 2020, v. 34, n. 6, p. 2333, doi. 10.1007/s12206-020-0509-5
- By:
- Publication type:
- Article
34
Research on Mechanical Aging Behavior of Grease in Rolling Bearing.
- Published in:
- Chinese Journal of Mechanical Engineering, 2025, v. 38, n. 1, p. 1, doi. 10.1186/s10033-024-01159-6
- By:
- Publication type:
- Article
35
Lateral coefficient of friction for characterizing winter road conditions.
- Published in:
- Canadian Journal of Civil Engineering, 2016, v. 43, n. 1, p. 73, doi. 10.1139/cjce-2015-0222
- By:
- Publication type:
- Article
36
Discrete Element Analysis of the Minimum Thickness of Oval Masonry Domes.
- Published in:
- International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2016, v. 10, n. 4, p. 457, doi. 10.1080/15583058.2014.996921
- By:
- Publication type:
- Article
37
Coefficient of Friction Measured from Nano- to Macro-Normal Loads on Plasma Sprayed Nanostructured Cermet Coatings.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2014, v. 45, n. 2, p. 1049, doi. 10.1007/s11661-013-2033-z
- By:
- Publication type:
- Article
38
Mechanism and influence factors of mechanical sensitivity of nitrocellulose.
- Published in:
- Cellulose, 2025, v. 32, n. 10, p. 5903, doi. 10.1007/s10570-025-06597-6
- By:
- Publication type:
- Article
39
Development of devices for measuring contact friction forces in the processes of volumetric plastic deformation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2839, doi. 10.1007/s00170-024-13537-4
- By:
- Publication type:
- Article
40
Modeling and simulation method of trajectory in double-side autonomous grinding considering the dynamic friction coefficient.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 3/4, p. 1199, doi. 10.1007/s00170-022-10473-z
- By:
- Publication type:
- Article
41
Experimental Evaluation of the Influence of Out-of-Roundness of Rotating Pairs on Friction Torque Operating under Dry Friction Conditions.
- Published in:
- Chemical & Petroleum Engineering, 2021, v. 56, n. 11/12, p. 918, doi. 10.1007/s10556-021-00862-8
- By:
- Publication type:
- Article
42
Impact of Aggregate Characteristics on Frictional Performance of Asphalt-Based High Friction Surface Treatments.
- Published in:
- CivilEng, 2025, v. 6, n. 1, p. 4, doi. 10.3390/civileng6010004
- By:
- Publication type:
- Article
43
Development of measurement apparatus of piston assembly friction in a small motorcycle engine.
- Published in:
- Combustion Engines (2300-9896), 2023, v. 194, n. 3, p. 32, doi. 10.19206/CE-168330
- By:
- Publication type:
- Article
44
Influence of piston surface treatment on piston assembly friction in an eco-mileage vehicle engine.
- Published in:
- Combustion Engines (2300-9896), 2022, v. 188, n. 1, p. 3, doi. 10.19206/CE-142552
- By:
- Publication type:
- Article
45
Friction hysteretic behavior of supported atomically thin nanofilms.
- Published in:
- NPJ 2D Materials & Applications, 2023, v. 7, n. 1, p. 1, doi. 10.1038/s41699-022-00363-z
- By:
- Publication type:
- Article
46
Experimental investigation of the dynamics of a brake shoe.
- Published in:
- Doklady Physics, 2016, v. 61, n. 12, p. 611, doi. 10.1134/S1028335816120028
- By:
- Publication type:
- Article
47
Surface Shape Evolution of Optical Elements during Continuous Polishing of Fused Quartz.
- Published in:
- Crystals (2073-4352), 2022, v. 12, n. 5, p. N.PAG, doi. 10.3390/cryst12050736
- By:
- Publication type:
- Article
48
Micro-Assembly Error Control of Specialized MEMS Friction Sensor.
- Published in:
- Micromachines, 2025, v. 16, n. 2, p. 142, doi. 10.3390/mi16020142
- By:
- Publication type:
- Article
49
Design of a Tribotester Based on Non-Contact Displacement Measurements.
- Published in:
- Micromachines, 2019, v. 10, n. 11, p. 748, doi. 10.3390/mi10110748
- By:
- Publication type:
- Article
50
Friction Determination by Atomic Force Microscopy in Field of Biochemical Science.
- Published in:
- Micromachines, 2018, v. 9, n. 7, p. 313, doi. 10.3390/mi9070313
- By:
- Publication type:
- Article