Works matching DE "COMPOSITE materials"

Results: 5000

Acoustic transmission loss of thermally loaded double-walled multilayer FG-GPLRC microplates integrated with magneto-electro-elastic layers.

Published in:

Mechanics Based Design of Structures & Machines, 2025, v. 53, n. 8, p. 5992, doi. 10.1080/15397734.2025.2472248

By:

Abdolhoseyni, J.;
Danesh, M.

Publication type:

Article

NICE evaluate 3C patch System for treating diabetic foot ulcers.

Published in:

Nursing & Residential Care, 2020, v. 22, n. 12, p. 1, doi. 10.12968/nrec.2020.22.12.2b

By:

Nazarko, Linda

Publication type:

Article

COMBUSTION SYNTHESIS OF BN-TIB2 COMPOSITES USING THERMAL ACTIVATION APPROACH.

Published in:

Electronic Journal of Natural Sciences, 2006, v. 6, n. 1, p. 25

By:

Manukyan, K. V.

Publication type:

Article

Preparation and Performance Tests of Wood-Plastic Composite Panels with Cotton Stalk Meal/Residual Film Particles.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 8, p. 6180, doi. 10.1007/s11837-025-07453-5

By:

Ran, Junhui;
Song, Zhipeng;
Wang, Xufeng

Publication type:

Article

Effect of Nanoclay Addition on Mechanical and Microstructure Properties of E-Glass Fiber and AA2022 Metal Skin Reinforced Epoxy Laminates.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 7, p. 5320, doi. 10.1007/s11837-024-06962-z

By:

Raja, S. Prashanth;
Sreenivasan, V. S.

Publication type:

Article

Numerical Modeling of Healthcare Materials.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4301, doi. 10.1007/s11837-025-07318-x

By:

Bulou, Hervé

Publication type:

Article

Influence of the Microstructure and Mechanical Properties of a Hypoeutectic Al-10Mg2Si In Situ Composite with Yttrium Addition: Influence of the Microstructure and Mechanical Properties of a Hypoeutectic Al-10Mg2Si In Situ Composite with Yttrium Addition: F. Zhao, X. Zhao, Bi, Zhu, Li, Qin, Liu, Wei, R. Zhao, and Wu

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 3, p. 1183, doi. 10.1007/s11837-024-06947-y

By:

Zhao, Fachang;
Zhao, Xingming;
Bi, JinLiang;
Zhu, Xiao;
Li, HongLin;
Qin, Guosheng;
Liu, Xue;
Wei, Wei;
Zhao, Rongda;
Wu, Fufa

Publication type:

Article

Effect of TiB2 on the Microstructure and Mechanical Properties of TiB2/Al-5Cu Matrix Composites: Effect of TiB2 on the Microstructure and Mechanical Properties of TiB2/Al-5Cu Matrix Composites: Tang, Omar, Jiang, and Mohamed

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 3, p. 1064, doi. 10.1007/s11837-024-06833-7

By:

Tang, Jingchuan;
Omar, Mohd Zaidi;
Jiang, Ripeng;
Mohamed, Intan Fadhlina

Publication type:

Article

Effect of Nano Reinforcements on the Hardness and Corrosion Resistance of Hybrid Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 10, p. 5932, doi. 10.1007/s11837-024-06786-x

By:

SarithNaidu, T.;
Venkatasubbaiah, Kambagowni

Publication type:

Article

Mechanical and Electrical Properties of 3Y-TZP/CrSi2 Ceramics Fabricated by Pressureless Sintering.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 5, p. 2595, doi. 10.1007/s11837-024-06494-6

By:

Du, Liangcai;
Wu, Cong;
Tang, Liangying;
Chen, Yucong;
Wu, Bingkun;
Yao, Zhenhua

Publication type:

Article

Comparative Study of the Microstructure and Mechanical Properties of WC/High-Speed Steel Composite Materials Prepared with Co, Ni, and Fe Binders.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 5, p. 2120, doi. 10.1007/s11837-024-06429-1

By:

Li, Hongnan;
Zhang, Hongmei;
Chen, Dege;
Jiang, Zhengyi

Publication type:

Article

Production of AA 2014 Matrix Wollostanite/Wood Ash Solid Waste Particle Reinforced Hybrid Composite with Powder Metallurgy and Investigation of Its Structural Properties.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1294, doi. 10.1007/s11837-024-06368-x

By:

Gökmeşe, Hakan;
Bülbül, Şaban

Publication type:

Article

Research Progress on the Effect of Third Components on the Microstructure and Properties of W-Cu Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 1, p. 20, doi. 10.1007/s11837-023-06270-y

By:

Wei, Chenlong;
Wang, Qiang;
Dong, Zhaoshi;
Wen, Jun

Publication type:

Article

Piezoelectric Composites: State-of-the-Art and Future Prospects.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 1, p. 340, doi. 10.1007/s11837-023-06202-w

By:

Dong, Haiwei;
Zhu, Ziye;
Li, Zhe;
Li, Mengmeng;
Chen, Jiangying

Publication type:

Article

Mechanical and Degradation Studies on the Biodegradable Composites of a Polylactic Acid Matrix Reinforced by Tricalcium Phosphate and ZnO Nanoparticles for Biomedical Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 12, p. 5379, doi. 10.1007/s11837-023-06086-w

By:

Hussain, Muzamil;
Khan, Shahzad Maqsood;
Shafiq, Muhammad;
Abbas, Naseem

Publication type:

Article

Combine Natural Stibnite with Bio-Carbon: A High-Capacity Composite Anode Material for Lithium-Ion Battery.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2626, doi. 10.1007/s11837-023-05817-3

By:

Meng, Bicheng;
Yu, Juan;
Peng, Jiaxin;
Wei, Yinbo;
Zhu, Fan;
Chen, Tianxin;
Yang, Naixing;
Chuan, Xiuyun;
Li, Linbo

Publication type:

Article

Effect of Thixoforming Process and Microstructural Changes in the A380 Matrix Composite Reinforced with NbC by the Stir Casting Method.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 1, p. 184, doi. 10.1007/s11837-022-05573-w

By:

Arendarchuck, Bruno Edu;
Fals, Hipolito Domingo Carvajal;
Lourençato, Luciano Augusto

Publication type:

Article

Trends in Metal-Based Composite Biomaterials for Hard Tissue Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 1, p. 102, doi. 10.1007/s11837-021-04992-5

By:

Nayak, Gargi Shankar;
Carradò, Adele;
Masson, Patrick;
Pourroy, Geneviève;
Mouillard, Flavien;
Migonney, Véronique;
Falentin-Daudre, Céline;
Pereira, Caroline;
Palkowski, Heinz

Publication type:

Article

Preparation and Electrochemical Performance of a S-Se-Ti3C2Tx/TiO2 Cathode.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4103, doi. 10.1007/s11837-021-04977-4

By:

Wang, Ying;
Hou, Jiyue;
Li, Xue;
Hu, Xiuqiong;
Wang, Yanjie;
Yang, Zhengwu;
Ai, Rui;
Zhang, Yiyong

Publication type:

Article

Nitrogen/Boron-Codoped Porous Carbon Derived from Poplar Powder–Graphene Oxide Composites as Electrode Material for Supercapacitors.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4091, doi. 10.1007/s11837-021-04957-8

By:

Ren, Xiaoyu;
Yuan, Zhe;
Lin, Zitong;
Lv, Xinying;
Qin, Chuanli;
Jiang, Xiankai

Publication type:

Article

Structural and Mechanical Properties of Porous Al2O3-Fap-TiO2 Composite as a Promising Material for Bone Implants.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 8, p. 2431, doi. 10.1007/s11837-021-04735-6

By:

Guidara, Awatef;
Chaari, Kamel;
Bouaziz, Jamel

Publication type:

Article

Artificial Neural Networks Framework for Detection of Defects in 3D-Printed Fiber Reinforcement Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 7, p. 2075, doi. 10.1007/s11837-021-04708-9

By:

Chen, Guan Lin;
Yanamandra, Kaushik;
Gupta, Nikhil

Publication type:

Article

Identification and Quantification of 3D Fiber Clusters in Fiber-Reinforced Composite Materials.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 7, p. 2129, doi. 10.1007/s11837-021-04703-0

By:

Schey, Mathew J.;
Beke, Tibor;
Appel, Lars;
Zabler, Simon;
Shah, Sagar;
Hu, Jie;
Liu, Fuqiang;
Maiaru, Marianna;
Stapleton, Scott

Publication type:

Article

Synergetic Effect of Micro-bamboo Filler and Graphene Nanoplatelets on Thermomechanical Properties of Epoxy-Based Hybrid Composite.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 12, p. 4466, doi. 10.1007/s11837-020-04125-4

By:

Gouda, Krushna;
Bhowmik, Sumit;
Das, Biplab

Publication type:

Article

Graphene Nanoplatelet Additives for High C-rate LiFePO4 Battery Cathodes.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 9, p. 3170, doi. 10.1007/s11837-020-04224-2

By:

Adepoju, Adewale A.;
Doumbia, Mohamed;
Williams, Quinton L.

Publication type:

Article

Phase Deconvolution of Multiphasic Materials by the Universal Scaling of the Magnetocaloric Effect.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 8, p. 2845, doi. 10.1007/s11837-020-04251-z

By:

Díaz-García, Álvaro;
Law, Jia Yan;
Gębara, Piotr;
Franco, Victorino

Publication type:

Article

Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB2-ZrB2 Ceramics.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 6, p. 2207, doi. 10.1007/s11837-020-04164-x

By:

Dubey, Shruti;
Awasthi, Shikha;
Nisar, Ambreen;
Balani, Kantesh

Publication type:

Article

Fabrication of a Cu/TiNi Composite with High Air-Tightness and Low Thermal Expansion.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 2, p. 883, doi. 10.1007/s11837-019-03930-w

By:

Xiao, Tao;
Li, Zhou;
Xiao, Zhu;
Zhang, Xi;
Qiu, Wenting;
Wang, Yang;
Guo, Xiaoli;
Lei, Qian

Publication type:

Article

Evaluation of Maghemite-Rich Iron Oxide Composite Prepared from Magnetite as Adsorbent for Gold from Chloride Solution.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 12, p. 4639, doi. 10.1007/s11837-019-03514-8

By:

Calderon, April Rose Malagum;
Alorro, Richard Diaz;
Tadesse, Bogale;
Yoo, Kyoungkeun;
Tabelin, Carlito Baltazar

Publication type:

Article

Modeling and Simulation of Composite Materials.

Published in:

2019

By:

Behera, Rakesh K.;
Pinisetty, Dinesh;
Luong, Dung D.

Publication type:

Editorial

Describing the Effective Conductivity of Two-Phase and Multiphase Materials via Weighted Means of Bounds and General Power Means.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 11, p. 4005, doi. 10.1007/s11837-019-03693-4

By:

Pabst, Willi;
Hříbalová, Soňa

Publication type:

Article

Honoring Best Posters and Papers At TMS2019.

Published in:: 2019
Publication type:: Calendar

Microstructure and Mechanical Properties of Ultrasound-Assisted Soldered Al-50 wt.%Si/Al-27 wt.%Si Joints for Automotive Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 6, p. 2025, doi. 10.1007/s11837-019-03337-7

By:

Xu, Chang;
Lang, Qiang;
Wang, Qian;
Chen, Yunru;
Yan, Jiuchun;
Chen, Shengyong

Publication type:

Article

Multi-material Additive Manufacturing by 3D Plasma Metal Deposition for Graded Structures of Super Duplex Alloy 1.4410 and the Austenitic Corrosion Resistant Alloy 1.4404.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 4, p. 1554, doi. 10.1007/s11837-019-03356-4

By:

Hoefer, Kevin;
Nitsche, Alexander;
Abstoss, Kevin Gordon;
Ertugrul, Goekan;
Haelsig, Andre;
Mayr, Peter

Publication type:

Article

Additive Manufacturing of Three-Phase Syntactic Foams Containing Glass Microballoons and Air Pores.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 4, p. 1520, doi. 10.1007/s11837-019-03355-5

By:

Singh, Ashish Kumar;
Deptula, Alexander J.;
Anawal, Rajesh;
Doddamani, Mrityunjay;
Gupta, Nikhil

Publication type:

Article

Heat Transfer Enhancement of Paraffin Phase Change Composite Material Using Recycled Aluminum Sawing Chips.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1049, doi. 10.1007/s11837-018-03324-4

By:

Thalmaier, György;
Sechel, Niculina Argentina;
Vida-Simiti, Ioan

Publication type:

Article

The Effect of Curing Conditions on the Properties of Cement-Based Composites Blended with Waste Marble Dust.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1002, doi. 10.1007/s11837-018-3254-9

By:

Toubal Seghir, Nadhir;
Mellas, Mekki;
Sadowski, Łukasz;
Krolicka, Aleksandra;
Żak, Andrzej

Publication type:

Article

Stimuli-Responsive Nano-polymer Composite Materials Based on the Triazine Skeleton Structure Used in Drug Delivery.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 1, p. 308, doi. 10.1007/s11837-018-3214-4

By:

Peng, Xueying;
Wei, Lulu;
Jing, Xinbo;
Cui, Lin;
Wu, Jianning;
Meng, Guihua;
Liu, Zhiyong;
Guo, Xuhong

Publication type:

Article

A RQPSO Algorithm for Multiphase Equilibrium Calculation in the KIVCET Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 12, p. 2893, doi. 10.1007/s11837-018-3174-8

By:

Li, Jiadong;
Song, Yanpo;
Zhou, Ping;
Ma, Ji;
Chen, Zhuo;
Chai, Liyuan

Publication type:

Article

Thermal Behavior of Polyester Composites Reinforced with Green Sugarcane Bagasse Fiber.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 1965, doi. 10.1007/s11837-018-3086-7

By:

da Luz, Fernanda Santos;
Monteiro, Sergio Neves;
Candido, Verônica Scarpini;
da Silva, Alisson Clay Rios

Publication type:

Article

Effect of Minor Titanium Addition on Copper/Diamond Composites Prepared by Hot Forging.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 2243, doi. 10.1007/s11837-018-2815-2

By:

Yang, Fei;
Sun, Wei;
Singh, Ajit;
Bolzoni, Leandro

Publication type:

Article

Strontium Titanate Composites for Microwave-Based Stress Sensing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 9, p. 1811, doi. 10.1007/s11837-018-2973-2

By:

Dhiman, Abhijeet;
Sharma, Animesh;
Shashurin, Alexey;
Tomar, Vikas

Publication type:

Article

Alloy Corrosion by Hot CO2 Gases.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 8, p. 1493, doi. 10.1007/s11837-018-2944-7

By:

Young, David J.;
Zhang, Jianqiang

Publication type:

Article

Prediction of Forming Limit of Dual-Phase 500 Steel Sheets Using the GTN Ductile Damage Model in an Innovative Hydraulic Bulging Test.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 8, p. 1542, doi. 10.1007/s11837-018-2936-7

By:

Cui, Xiao-Lei;
Zhang, W. W.;
Zhang, Zhi-Chao;
Chen, Yi-Zhe;
Lin, Peng;
Chi, Cheng-Zhong

Publication type:

Article

Nonisothermal Carbothermal Reduction Kinetics of Titanium-Bearing Blast Furnace Slag.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 8, p. 1443, doi. 10.1007/s11837-018-2927-8

By:

Hu, Mengjun;
Wei, Ruirui;
Hu, Meilong;
Wen, Liangying;
Ying, Fangqing

Publication type:

Article

Shape Modification and Size Classification of Microcrystalline Graphite Powder as Anode Material for Lithium-Ion Batteries.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 8, p. 1392, doi. 10.1007/s11837-018-2784-5

By:

Wang, Cong;
Gai, Guosheng;
Yang, Yufen

Publication type:

Article

Experimental Investigation on Mechanical and Thermal Properties of Marble Dust Particulate-Filled Needle-Punched Nonwoven Jute Fiber/Epoxy Composite.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 7, p. 1284, doi. 10.1007/s11837-018-2828-x

By:

Sharma, Ankush;
Patnaik, Amar

Publication type:

Article

Additive Manufacturing of Composites and Complex Materials.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 3, p. 272, doi. 10.1007/s11837-018-2742-2

By:

Spowart, Jonathan E.;
Gupta, Nikhil;
Lehmhus, Dirk

Publication type:

Article

Friction and Wear Behavior of Carbon Fabric-Reinforced Epoxy Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 12, p. 2443, doi. 10.1007/s11837-017-2273-2

By:

Şahin, Y.;
Baets, Patrick

Publication type:

Article

Testing Numerical Modeling of Phase Coarsening by Microgravity Experiments.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 12, p. 2825, doi. 10.1007/s11837-017-2553-x

By:

Wang, K.;
Glicksman, M.

Publication type:

Article