Works matching DE "FINITE element method"

Results: 5000

Mechanical and Finite Element Analysis of a Tree Microstructural Model Derived from Softwood Annual Rings.

Published in:

BioResources, 2025, v. 20, n. 3, p. 7842, doi. 10.15376/biores.20.3.7842-7855

By:

Gorgulu, Yasin Furkan;
Aydin, Murat

Publication type:

Article

Development of Finite Element Model for Charring Rate for Solid Timber from Malaysian Tropical Hardwood Subjected to Standard Fire.

Published in:

BioResources, 2025, v. 20, n. 3, p. 7695, doi. 10.15376/biores.20.3.7695-7712

By:

Francis, Lannie;
Kueh, Ahmad Beng Hong;
Bhkari, Norshariza Mohamad;
Azlan, Hafizah Muhamad;
Ahmad, Zakiah

Publication type:

Article

Shear Analogy Stiffness Adjustment for CLT Plates.

Published in:

BioResources, 2025, v. 20, n. 3, p. 7027, doi. 10.15376/biores.20.3.7027-7033

By:

Silva, Guilherme dos Santos;
Aguiar, Fabrício da Silva;
Reis, Elvys Dias;
Santos, Herisson Ferreira dos;
Faustino, Emerson;
Mascarenhas, Adriano Reis Prazeres;
Christoforo, André Luis

Publication type:

Article

Investigating Shear Force and Torque of Grapevine Shoots Based on Experimental and Simulation Analysis.

Published in:

BioResources, 2025, v. 20, n. 3, p. 6662, doi. 10.15376/biores.20.3.6662-6679

By:

Lingxin Bu;
Qiangqiang Zhang;
Qianwen Kou;
Yun Chen;
Xingjia Li;
Xingtao Wu;
Teng Zhang;
Xingrun Tang;
Jipeng Wang;
Li Zhao

Publication type:

Article

Simulation Study on the Static Characteristics of 'Fivetier Outer Eave Column-head Dougong Bracket' from the Main Hall of Nanchan Temple in Tang Dynasty.

Published in:

BioResources, 2025, v. 20, n. 3, p. 6082, doi. 10.15376/biores.20.3.6082-6099

By:

Chang Chen;
Yuanhe Li;
Dongnan Han;
Hongfa Kang;
Yongzheng Li

Publication type:

Article

UNRAVELLING THE COMPLEXITY: A REVIEW OF GEOMETRICAL MODELLING TECHNIQUES IN PLAIN WEFT KNITTED TEXTILE STRUCTURES.

Published in:

Journal of Textiles & Engineers / Tekstil ve Mühendis, 2025, v. 32, n. 138, p. 210, doi. 10.7216/teksmuh.1506139

By:

SIDDIQUI, Muhammad Owais Raza;
ZAHID, Momina;
AYAZ, Aqsa;
HASHMI, Sumayya;
AHMED, Aiman;
Danmei SUN

Publication type:

Article

FINITE ELEMENT ANALYSIS OF ENSET FIBER COMPOSITE MATERIAL.

Published in:

Journal of Textiles & Engineers / Tekstil ve Mühendis, 2025, v. 32, n. 138, p. 105, doi. 10.7216/teksmuh.1629252

By:

ABEBE, Biniyam Ayele;
SEÇGİN, Ömer;
KILIÇ, Recep

Publication type:

Article

CONSIDERATIONS ON TEMPERATURE AND HEAT TRANSFER IN DENTAL IMPLANTS: AN EX VIVO STUDY.

Published in:

Romanian Journal of Oral Rehabilitation, 2025, v. 17, n. 2, p. 1068, doi. 10.62610/RJOR.2025.2.17.96

By:

Curca, Razvan;
Cosmin-Ionuț, Crețu;
Andreea, Tibeică;
Ovidiu, Stamatin;
Cosmin, Oniciuc;
Eduard, Adam;
Corina, Budău;
Maria, Camilar;
Maria, Bolat;
Iodan-Alexandru, Radu;
Doriana, Agop-Forna;
Didilescu, Andreea;
Imre, Marina;
Pituru, Silviu Mirel;
Forna, Norina Consuela

Publication type:

Article

INFLUENCE OF ALVEOLAR BONE RESORPTION ON STRESS, DEFORMATION AND DISPLACEMENTS IN MANDIBULAR IMPLANT-SUPPORTED REMOVABLE HYBRID PROSTHESES: A FINITE ELEMENT STUDY.

Published in:

Romanian Journal of Oral Rehabilitation, 2025, v. 17, n. 2, p. 510, doi. 10.62610/RJOR.2025.2.17.46

By:

Drochioi, Cristian;
Sava, Petrica-Florin;
Gherasimescu, Stefan;
Forna, Norina;
Blanaru, Igor;
Costan, Victor Vlad

Publication type:

Article

Processing Parameter Energy-saving Optimization for Boring Automobile Engine Crankshaft Holes Considering Coaxiality.

Published in:

China Mechanical Engineering, 2025, v. 36, n. 6, p. 1280, doi. 10.3969/j.issn.1004-132X.2025.06.015

By:

ZHANG Dengyong;
LI Congbo;
WU Shaoqing;
ZHANG You;
LI Chengyuan

Publication type:

Article

Optimization and Experimental Study of Bolt Retreat Groove Rolling Wheels Based on Finite Element Simulation.

Published in:

China Mechanical Engineering, 2025, v. 36, n. 6, p. 1214, doi. 10.3969/j.issn.1004-132X.2025.06.009

By:

NIU Yanzhao;
LIU Hongwei;
SONG Yali;
ZHU Xianglong;
HUANG Jiamei;
KANG Renke

Publication type:

Article

Convergence of BDF2-Galerkin finite element scheme for cancer invasion model.

Published in:

European Physical Journal: Special Topics, 2025, v. 234, n. 8, p. 2557, doi. 10.1140/epjs/s11734-024-01272-6

By:

Angelin Shena, S.;
Manimaran, J.;
Sethukumarasamy, K.;
Shangerganesh, L.

Publication type:

Article

An advanced algorithm for solving incompressible fluid dynamics: from Navier–Stokes to Poisson equations.

Published in:

European Physical Journal: Special Topics, 2025, v. 234, n. 8, p. 2191, doi. 10.1140/epjs/s11734-024-01209-z

By:

Mohammad, Mutaz;
Trounev, Alexander

Publication type:

Article

Adaptation of the Finite Element Method to the Stieltjes String Deformation Problem with Nonlinear Condition.

Published in:

Computational Mathematics & Mathematical Physics, 2025, v. 65, n. 6, p. 1423, doi. 10.1134/S0965542525700538

By:

Zvereva, M. B.;
Kamenskii, M. I.;
Shabrov, S. A.

Publication type:

Article

Contrast of the Damage Effect of Thermobaric Explosive and TNT on the Closed Cabin.

Published in:

Chinese Journal of Explosives & Propellants, 2025, v. 48, n. 7, p. 645, doi. 10.14077/j.issn.1007-7812.202502005

By:

XUE Jian-feng;
GUO Chun;
WANG Wei;
XU Hong-hao

Publication type:

Article

Modeling Hydrogen Transport and Trapping in Vacancy Clusters: Application to the ITER-Like Monoblocks.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4050, doi. 10.1007/s11661-025-07892-4

By:

Chroeun, S.;
Ben Ayed, S.;
Bian, S.;
Wauters, T.;
Bonnin, X.;
Gaspérini, M.;
Mougenot, J.;
Charles, Y.

Publication type:

Article

A Derivation of Crystal Plasticity-Based Heat Conduction Equation and Thermo-coupled Finite Element Simulation on Strain-Induced Martensitic Transformation at Different Strain Rates in Polycrystal SUS304.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4126, doi. 10.1007/s11661-025-07881-7

By:

Huang, Yihui;
Sun, Qian;
Gao, Chong;
Cao, Bo;
Iwamoto, Takeshi

Publication type:

Article

Axial Shortening Distance of Ti60/TC18 Heterogeneous Alloys by Inertia Friction Welding: Combine FEM Model, Microstructure and Properties.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3837, doi. 10.1007/s11661-025-07871-9

By:

Zhang, Junyi;
Liu, Yingying;
Zhai, Jiangbo;
Zhou, Nian;
Liu, Shifeng;
Tan, Qianhui;
Wang, Wen;
Wang, Kuaishe

Publication type:

Article

水质检测机器人结构设计及 CFD 水动力仿真分析.

Published in:

Fishery Modernization, 2025, v. 52, n. 3, p. 1, doi. 10.26958/j.cnki.1007-9580.2025.03.001

By:

黄红武;
林勇;
高秀晶;
袁超;
姜璟珺

Publication type:

Article

Temperature evolution within a solar panel using a cooling source of varying sizes and shapes in the presence of a hybrid nanofluid.

Published in:

Journal of Thermal Engineering, 2025, v. 11, n. 4, p. 1011, doi. 10.14744/thermal.0000960

By:

GHAZI, Boubekeur;
KADRI, Syham;
MEHDAOUI, Razli

Publication type:

Article

无托槽隐形矫治研究进展.

Published in:

Journal of Modern Medicine & Health, 2025, v. 41, n. 7, p. 1725, doi. 10.3969/j.issn.1009-5519.2025.07.040

By:

文雅;
王胜国

Publication type:

Article

A Combinatory Analytical and Finite Element Approach for Comparing Electromagnetic Performance in IPM and SPM Synchronous Motors.

Published in:

Journal of Electromagnetic Engineering & Science, 2025, v. 25, n. 4, p. 361, doi. 10.26866/jees.2025.4.r.307

By:

Trinh Truong Cong;
Bao Doan Thanh;
Dinh Bui Minh;
Nguyen Gia Minh Thao;
Vuong Dang Quoc

Publication type:

Article

Transparent Boundary Conditions for Finite Element Method-Based Parabolic Equation.

Published in:

Journal of Electromagnetic Engineering & Science, 2025, v. 25, n. 4, p. 394, doi. 10.26866/jees.2025.4.l.25

By:

Sungjin Ahn;
Jongyoung Kim;
Kyungil Kwon;
Yongheui Cho;
Young-Seek Chung

Publication type:

Article

Analysis of a Novel Hybrid-Excitation External-Rotor Switched Reluctance Motor.

Published in:

Progress in Electromagnetics Research C, 2025, v. 157, p. 49, doi. 10.2528/PIERC25051103

By:

Liyun Feng;
Kaikai Diao

Publication type:

Article

Modelling and Analysis of Magnetic Field Distribution Generated by a Magnetised Paraboloid.

Published in:

Progress in Electromagnetics Research C, 2025, v. 157, p. 27, doi. 10.2528/PIERC25050704

By:

Van Tai Nguyen;
Thi Phuoc Van Nguyen

Publication type:

Article

Performance Analysis of Electrical Impedance and Acoustic Tomography for Early Breast Cancer Detection.

Published in:

Progress in Electromagnetics Research C, 2025, v. 157, p. 95, doi. 10.2528/PIERC25042701

By:

Ganesan, Annapoorani;
Rajamanickam, Vani;
Durgamahanthi, Vaishali

Publication type:

Article

Multi-Objective Optimization of Asymmetric Pole-Consequent Pole Permanent Magnet Motor.

Published in:

Progress in Electromagnetics Research C, 2025, v. 157, p. 7, doi. 10.2528/PIERC25041506

By:

Jianwei Liang;
Xinyu Zeng;
Yuqian Zhao;
Tian Song;
Xiubin Zhu;
Zhangsheng Liu

Publication type:

Article

The Electromagnetic Distribution and Intelligent Signal Extraction of ELF-EM in Hole-Ground Communication.

Published in:

Progress in Electromagnetics Research B, 2025, v. 113, p. 101, doi. 10.2528/PIERB25021105

By:

Fukai Li;
Yue Zhao;
Wei Guo;
Jian Wu;
Zan Yin;
Huaiyun Peng;
Kai Liu

Publication type:

Article

Sensitivity of Concrete Thermodynamic Parameters to Thermal Stresses in Diversion Tunnel Lining.

Published in:

Strength of Materials, 2025, v. 57, n. 2, p. 423, doi. 10.1007/s11223-025-00778-1

By:

Xia, S. F.;
Cao, S. Y.;
Liu, Z. Y.;
Wu, K.;
Zhang, X.;
Li, X. L.

Publication type:

Article

Random Vibration Fatigue Analysis of Supercapacitor Boxes in Rail Vehicles.

Published in:

Strength of Materials, 2025, v. 57, n. 2, p. 363, doi. 10.1007/s11223-025-00775-4

By:

Chen, F.;
Li, W. Y.;
Hua, J.;
Tang, J.;
Ruan, G. Q.

Publication type:

Article

Research Software Package for Solving Boundary Value Problems of Mechanics of Deformable Structures in Three-Dimensional Formulation.

Published in:

Strength of Materials, 2025, v. 57, n. 2, p. 312, doi. 10.1007/s11223-025-00774-5

By:

Kobelskyi, S. V.

Publication type:

Article

沟道敷设电力电缆温度场与载流量仿真研究.

Published in:

Journal of Harbin University of Science & Technology, 2025, v. 30, n. 3, p. 86, doi. 10.15938/j.jhust.2025.03.010

By:

李欢;
魏磊;
张延伟;
惠卓斌

Publication type:

Article

基于改进 J-A 模型的管道力磁解析方法研究.

Published in:

Journal of Harbin University of Science & Technology, 2025, v. 30, n. 3, p. 58, doi. 10.15938/j.jhust.2025.03.007

By:

田野;
陈海艳;
阙永彬;
穆玥凯;
高涛;
王国庆;
耿浩

Publication type:

Article

列车制动副的盘面最高温度与热 - 机耦合特性研究.

Published in:

Journal of Harbin University of Science & Technology, 2025, v. 30, n. 3, p. 66, doi. 10.15938/j.jhust.2025.03.008

By:

于春雨;
李为普;
郭阳;
洪凡力;
张庆海;
高健玮

Publication type:

Article

Mechanical Behavior of a Deep‐Buried Soft Soil Conveyance Tunnel Crossing Soft‐Hard Soil Layers Under High‐Pressure Water Conditions.

Published in:

Advances in Civil Engineering, 2025, v. 2025, p. 1, doi. 10.1155/adce/2143855

By:

Liu, Hao;
Li, Zonglong;
He, Zhipan;
Wang, Tiancheng;
Ni, Mingfu;
Ren, Jiali;
Zhang, Xiang;
Wang, Xiaofeng;
Shan, Yi

Publication type:

Article

基于磁悬浮技术的圆周引纬机构设计.

Published in:

Wool Textile Journal, 2025, v. 53, n. 7, p. 111, doi. 10.19333/j.mfkj.20240901001

By:

郑好;
林富生;
董居康

Publication type:

Article

NUMERICAL ASSESSMENT OF COMBUSTION PARAMETERS ON THERMAL REGENERATIVE LADLE PREHEATING.

Published in:

Thermal Science, 2025, v. 29, n. 4A, p. 2561, doi. 10.2298/TSCI241005271W

By:

Lipeng WANG;
Tao CHI;
Xuebo CHEN

Publication type:

Article

STUDY ON THE VARIATION LAW OF LAYERED STRESSES OF OVERHEAD CONDUCTORS IN HIGH-ALTITUDE COLD ZONE.

Published in:

Thermal Science, 2025, v. 29, n. 4A, p. 2587, doi. 10.2298/TSCI240714276H

By:

Zhilei HAN;
Yongdou LIU;
Hongwei ZhANG;
Jiali DUAN;
Zhidong CHEN

Publication type:

Article

Equal-thickness screening mechanism of multi-mass vibrating flip-flow screens.

Published in:

Physicochemical Problems of Mineral Processing, 2025, v. 61, n. 4, p. 1, doi. 10.37190/ppmp/206993

By:

Sanpeng Gong;
Fuqiang Zhang;
Ningning Xu;
Guofeng Zhao;
Bowei Liu;
Jialiang Guo;
Yifan Guo

Publication type:

Article

Separation mechanism and kinematic characteristics of particles on screen panel with different vibration modes.

Published in:

Physicochemical Problems of Mineral Processing, 2025, v. 61, n. 4, p. 1, doi. 10.37190/ppmp/205443

By:

Tao Wu;
Sanpeng Gong;
Guofeng Zhao;
Ningning Xu;
Bowei Liu;
Fuqiang Zhang

Publication type:

Article

Interaction Between Layered Saturated Soft Rock–Soil Mass and Pile Groups Considering Free‐Standing Length and Rock‐Socketed Depth.

Published in:

International Journal for Numerical & Analytical Methods in Geomechanics, 2025, v. 49, n. 12, p. 2805, doi. 10.1002/nag.4014

By:

Chen, Yuan Feng;
Ai, Zhi Yong;
Ma, Zhan Guo;
Ye, Zi Kun

Publication type:

Article

ANN‐Based Green's Function Approach for Reservoir Geomechanics.

Published in:

International Journal for Numerical & Analytical Methods in Geomechanics, 2025, v. 49, n. 12, p. 2820, doi. 10.1002/nag.4012

By:

Peres, Matheus L.;
Sotelino, Elisa D.;
Mesquita, Leonardo C.

Publication type:

Article

Numerical Study on the Thermo‐Hydro‐Mechanical Behavior of Energy Micropiles in Hypoplastic Soft Clay Under Cyclic Thermal Loading.

Published in:

International Journal for Numerical & Analytical Methods in Geomechanics, 2025, v. 49, n. 12, p. 2731, doi. 10.1002/nag.4007

By:

Ciardi, Giovanni;
Tamagnini, Claudio

Publication type:

Article

Biomechanical Advantages of Novel Duet Screws Plus Bilateral Satellite Rods Fixation in the Correction Surgery for Adult Spinal Deformity.

Published in:

Orthopaedic Surgery, 2025, v. 17, n. 8, p. 2454, doi. 10.1111/os.70121

By:

He, Zhong;
Chen, Yi;
Liu, Zhen;
Yang, Bo;
Shi, Benlong;
Wang, Yu;
Feng, Zhenhua;
Zhang, Tianyuan;
Chen, Xipu;
Qiu, Yong;
Qin, Xiaodong;
Zhu, Zezhang

Publication type:

Article

Detecting isolated resonance curves using fixed frequency voltage control tests.

Published in:

Nonlinear Dynamics, 2025, v. 113, n. 17, p. 22257, doi. 10.1007/s11071-025-11347-1

By:

Robbins, E.;
Kuether, R. J.;
Pacini, B. R.;
Moreu, F.

Publication type:

Article

Description and Convergence Order Analysis of the Finite Element‐Volume Spatial Discretization Method.

Published in:

International Journal for Numerical Methods in Fluids, 2025, v. 97, n. 9, p. 1189, doi. 10.1002/fld.5399

By:

Adela Puscas, Maria;
Angeli, Pierre‐Emmanuel;
Nouaime, Nathalie;
Jamelot, Erell

Publication type:

Article

Modeling microstructural alterations and the formation of keyhole-mode melting on TI6AL4V during single-pass laser ablation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 7/8, p. 4085, doi. 10.1007/s00170-025-16161-y

By:

Caruso, Serafino;
Saffioti, Maria Rosaria;
Rotella, Giovanna

Publication type:

Article

Experimental and simulation-based investigation of serrated chip formation in high-speed milling of Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 7/8, p. 3693, doi. 10.1007/s00170-025-16130-5

By:

Mustafa, Ghulam;
Li, Binxun;
Zhang, Song

Publication type:

Article

Optimization of extendable die SPR-bonded hybrid joining structures based on kriging and multi-objective genetic algorithms.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 7/8, p. 3657, doi. 10.1007/s00170-025-16086-6

By:

Wang, Menghan;
Liu, Shun;
Wu, Hongrui;
Chen, Yifeng;
Han, Yan

Publication type:

Article

Analytical and numerical analysis of deformation energy of Chain-die formed variable width cross-section profiles.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 7/8, p. 3435, doi. 10.1007/s00170-025-16046-0

By:

Xia, Hui;
Wu, Kang;
Xiao, Junfeng;
Liu, Xiaoli;
Sun, Yong

Publication type:

Article