Works matching DE "DRUMS (Containers)"

Results: 58

A system for rinsing herbicide residues from drums during highway right-of-way spray operations.

Published in:

Bulletin of Environmental Contamination & Toxicology, 1987, v. 39, n. 4, p. 680, doi. 10.1007/BF01698462

By:

Frank, Richard;
Stripnieks, Andris;
Clegg, B.

Publication type:

Article

Controlling of Segregation in Rotating Drums by Independent End Wall Rotations.

Published in:

KONA: Powder & Particle Journal, 2016, n. 33, p. 239, doi. 10.14356/kona.2016004

By:

Hsiu-Po Kuo;
Wei-Ting Tseng;
An-Ni Huang

Publication type:

Article

Storing steel drums of flammable liquids -- regulations and reality.

Published in:

Loss Prevention Bulletin, 2016, n. 252, p. 7

By:

Craig, Tom

Publication type:

Article

Fires and explosions initiated by static electricity - case histories.

Published in:

Loss Prevention Bulletin, 2011, n. 217, p. 4

By:

Glor, Martin;
Pey, Alexis

Publication type:

Article

Handling of reactive chemical wastes -- a review.

Published in:

Loss Prevention Bulletin, 2009, n. 210, p. 18

By:

Etchells, J. C.;
James, H.;
Jones, M.;
Summerfield, A. J.

Publication type:

Article

Acetic anhydride drum rupture.

Published in:: Loss Prevention Bulletin, 2009, n. 210, p. 16
Publication type:: Article

A fatal accident involving a fork lift truck.

Published in:

Loss Prevention Bulletin, 2008, n. 203, p. 19

By:

Duggan, Sarah

Publication type:

Article

Toxic leak in Kenya.

Published in:: Loss Prevention Bulletin, 2008, n. 201, p. 31
Publication type:: Article

Le rapatriement d’un tambour sámi du xvii<sup>e</sup> siècle dans un musée autochtone sámi..

Published in:

Revue d'études Autochtones, 2021, v. 51, n. 1, p. 75

By:

Porsanger, Jelena

Publication type:

Article

An investigation on heat transfer of granular materials in the novel flighted rotary drum.

Published in:

Canadian Journal of Chemical Engineering, 2017, v. 95, n. 2, p. 386, doi. 10.1002/cjce.22681

By:

Li, Muyuan;
Ling, Xiang;
Peng, Hao;
Cao, Zhengyu;
Wang, Yan

Publication type:

Article

WHAT INFLUENCE DO THE OLD SÁMI NOAIDI DRUMS FROM LAPLAND PLAY IN THE CONSTRUCTION OF NEW SHAMAN DRUMS BY SÁMI PERSONS TODAY?

Published in:

Folklore (14060957), 2014, v. 56, p. 117, doi. 10.7592/FEJF2014.56.joy

By:

Joy, Francis

Publication type:

Article

Product News.

Published in:: 2004
Publication type:: Product Review

Two-phase reactive transport modeling of heterogeneous gas production in a low- and intermediate-level waste repository.

Published in:

2023

By:

Vehling, Falko;
Shao, Haibing

Publication type:

Abstract

The effect of adapting speed, duration, and distance on the tactile motion aftereffect.

Published in:

Somatosensory & Motor Research, 2010, v. 27, n. 3, p. 100, doi. 10.3109/08990220.2010.505033

By:

Planetta, Peggy J.;
Servos, Philip

Publication type:

Article

A study of 'worms' melt fracture in polyethylene extrusion blow molding process using capillary rheometry.

Published in:

Polymer Engineering & Science, 2016, v. 56, n. 6, p. 650, doi. 10.1002/pen.24291

By:

Woo Inn, Yong;
Sukhadia, Ashish M.;
Whitte, William M.

Publication type:

Article

Mixing and segregation in rotary drums with sectional internals.

Published in:

Chemie Ingenieur Technik (CIT), 2020, v. 92, n. 9, p. 1313, doi. 10.1002/cite.202055135

By:

Prießen, J.;
Behrens, M.;
Schultz, H. J.

Publication type:

Article

Cyclic neutron activation analysis of large samples with a pulsed 14 MeV neutron source.

Published in:

Journal of Radioanalytical & Nuclear Chemistry, 2017, v. 311, n. 1, p. 917, doi. 10.1007/s10967-016-5098-5

By:

Mildenberger, Frank;
Mauerhofer, Eric

Publication type:

Article

Prompt gamma neutron activation analysis of large heterogeneous samples composed of concrete and polyethylene.

Published in:

Journal of Radioanalytical & Nuclear Chemistry, 2016, v. 309, n. 3, p. 1265, doi. 10.1007/s10967-016-4743-3

By:

Mildenberger, Frank;
Mauerhofer, Eric

Publication type:

Article

Prompt gamma neutron activation analysis of a 200 L steel drum homogeneously filled with concrete.

Published in:

Journal of Radioanalytical & Nuclear Chemistry, 2016, v. 309, n. 1, p. 273, doi. 10.1007/s10967-016-4768-7

By:

Mauerhofer, Eric;
Havenith, Andreas;
Kettler, John

Publication type:

Article

Cross-sectional and axial flow characteristics of dry granular material in rotating drums.

Published in:

Granular Matter, 2009, v. 11, n. 1, p. 13, doi. 10.1007/s10035-008-0118-y

By:

Hsien-Ter Chou;
Ching-Fang Lee

Publication type:

Article

Heat and Mass Transfer in the Drying of Disperse Materials in Cocurrent Drum Driers.

Published in:

Journal of Engineering Physics & Thermophysics, 2003, v. 76, n. 2, p. 352, doi. 10.1023/A:1023609419314

By:

Safonov, A.O.

Publication type:

Article

Motion of Grinding Bodies after Their Separation from the Surface of a Drum of a Planetary Mill.

Published in:

Theoretical Foundations of Chemical Engineering, 2005, v. 39, n. 3, p. 313, doi. 10.1007/s11236-005-0080-x

By:

Vaitekhovich, P.;
Khves’ko, G.;
Semenenko, D.

Publication type:

Article

NUMERICAL EXPERIMENTS ON DETERMINATION OF MAXIMAL STRESSES OF NON-REINFORCEMENT CUT DRUMS OF MINE WINDERS.

Published in:

Scientific Bulletin of National Mining University, 2012, n. 5, p. 71

By:

Sosnina, Ye. N.

Publication type:

Article

New Products.

Published in:: 1992
Publication type:: Product Review

The Underwater Recovery of Monumental Marble Column Drums from an Ancient Shipwreck at Kızılburun, Turkey.

Published in:

Journal of Maritime Archaeology, 2016, v. 11, n. 2, p. 219, doi. 10.1007/s11457-016-9163-6

By:

Carlson, Deborah

Publication type:

Article

Simulation of the granular flow of cylindrical particles in the rotating drum.

Published in:

AIChE Journal, 2018, v. 64, n. 11, p. 3835, doi. 10.1002/aic.16342

By:

Yang, Shiliang;
Chew, Jia Wei;
Sun, Yuhao

Publication type:

Article

Flow - Induced Dilation of Cohesive Granular Materials.

Published in:

AIChE Journal, 2006, v. 52, n. 12, p. 4124, doi. 10.1002/aic.11014

By:

Faqih, AbdulMobeen;
Chaudhuri, Bodhisattwa;
Muzzio, Fernando J.;
Tomassone, M. Silvina;
Alexander, Albert;
Hammond, Steve

Publication type:

Article

Coupled Axial-Radial Segregation in Rotating Drums with High Fill Levels.

Published in:

AIChE Journal, 2006, v. 52, n. 7, p. 2422, doi. 10.1002/aic.10866

By:

Kuo, H. P.;
Shih, P. Y.;
Hsu, R. C.

Publication type:

Article

CLOSED LIQUID DISPENSING: Secure Container Contents While Reducing Risk.

Published in:

Chemical Engineering, 2008, v. 115, n. 7, p. 46

By:

Rokkjaer, Henrik;
Gran, Bryan

Publication type:

Article

Drum roll.

Published in:

Nature Physics, 2011, v. 7, n. 10, p. 741, doi. 10.1038/nphys2115

By:

Buchanan, Mark

Publication type:

Article

Pan in the 21st Century.

Published in:

Montessori Life, 2002, v. 14, n. 4, p. 16

By:

Leto, Frank

Publication type:

Article

Tarımsal Sulamada Kullanılan Santrifüj Pompaların Alüminyum Çarklarında Meydana Gelebilecek Aşınmanın Belirlenmesi.

Published in:

Journal of Tekirdag Agricultural Faculty, 2010, v. 7, n. 3, p. 187

By:

Yüksel, E.;
Eker, B.

Publication type:

Article

Failure Analysis: Wastewater Drum Bulging.

Published in:

Journal of Failure Analysis & Prevention, 2009, v. 9, n. 2, p. 127, doi. 10.1007/s11668-008-9203-0

By:

Vormelker, P. R.;
Guy, J. C.

Publication type:

Article

Fall of milling body in outward-spinning planetary mill.

Published in:

Chemical & Petroleum Engineering, 2013, v. 49, n. 1/2, p. 99, doi. 10.1007/s10556-013-9710-z

By:

Khvesko, G.;
Vaitekhovich, P.;
Semenenko, D.

Publication type:

Article

Determination of the drop height of grinding bodies in planetary mills.

Published in:

Chemical & Petroleum Engineering, 2006, v. 42, n. 11/12, p. 618, doi. 10.1007/s10556-006-0152-8

By:

Vaitekhovich, P.

Publication type:

Article

Finite Element Modeling of an Aircraft Tire Rolling on a Steel Drum: Experimental Investigations and Numerical Simulations.

Published in:

Applied Sciences (2076-3417), 2018, v. 8, n. 4, p. 593, doi. 10.3390/app8040593

By:

Rosu, Iulian;
Elias-Birembaux, Hélène L.;
Lebon, Frédéric

Publication type:

Article

Modelling magnetic fields due to steel drum accumulations.

Published in:

Geophysical Prospecting, 2007, v. 55, n. 5, p. 737, doi. 10.1111/j.1365-2478.2007.00635.x

By:

Furness, Peter

Publication type:

Article

Residence Time Distribution of Segregating Sand Particles in a Rotary Drum.

Published in:

Particulate Science & Technology, 2010, v. 28, n. 4, p. 319, doi. 10.1080/02726351.2010.496298

By:

Bensmann, S.;
Subagyo, A.;
Walzel, P.

Publication type:

Article

A CONTROL SYSTEM FOR MOBILE FORESTRY CABLEWAY WITH HYDROSTATIC DRIVES - WINDING DRUMS CONTROL.

Published in:

Annals of DAAAM & Proceedings, 2011, p. 1413

By:

Hutak, Petr;
Klima, Bohumil;
Prochazka, Petr

Publication type:

Article

A manually operated coiled tube pump using plastic drum as a coil supporting structure.

Published in:

Agricultural Engineering International: CIGR Journal, 2016, v. 18, n. 4, p. 81

By:

Basunia, M. A.;
Abdul Wahid, Nora Shafitri Binti;
Morsidi, Maziri Bin D. H.;
Rahman, Ahmed S. Bin H. A.

Publication type:

Article

Supreme People’s Court Issues 10 Major Cases of Administrative Inaction.

Published in:: Chinese Law & Government, 2017, v. 49, n. 2, p. 101, doi. 10.1080/00094609.2017.1318588
Publication type:: Article

The smoked drum.

Published in:

2013

By:

Khilnani, Gurudas;
Thaddanee, Rekha;
Khilnani, Ajeet Kumar

Publication type:

Letter

Ultra-Hard Top drum storage meets EPA regulations.

Published in:: 2011
Publication type:: Product Review

From Capstan to Coal Mine with a Bean Can.

Published in:

Teaching Mathematics & its Applications, 1998, v. 17, n. 3, p. 112, doi. 10.1093/teamat/17.3.112

By:

EAGLE, RUTH;
CHALLINOR, PETER

Publication type:

Article

Traversing language barriers.

Published in:

International Journal of Language & Culture, 2019, v. 6, n. 1, p. 195, doi. 10.1075/ijolc.00022.woj

By:

Wojtylak, Katarzyna I.

Publication type:

Article

A Comparative Study of Pelleted Broiler Litter Biochar Derived from Lab-Scale Pyrolysis Reactor with that Resulted from 200-Liter-Oil Drum Kiln to Ameliorate the Relations between Physicochemical Properties of Soil with Lower Organic Matter Soil and Soybean Yield.

Published in:

EnvironmentAsia, 2014, v. 7, n. 1, p. 95

By:

Chintana Sanvong;
Preeda Nathewet

Publication type:

Article

Archiving an urban exploration – MR NICE GUY, cooking oil drums, sterile blister packs and uncanny bikinis.

Published in:

2016

By:

Sachs Olsen, Cecilie;
Hawkins, Harriet

Publication type:

Proceeding

Modelling of lateral dynamics for an endless metal process belt.

Published in:

Mathematical & Computer Modelling of Dynamical Systems, 2012, v. 18, n. 6, p. 571, doi. 10.1080/13873954.2012.678859

By:

Schulmeister, KlemensG.;
Kozek, Martin

Publication type:

Article

OPTIMAL CONFIGURATION OF STORAGE SYSTEMS FOR MIXED PYRAMID STACKING.

Published in:

International Journal of Industrial Engineering, 2013, v. 20, n. 1/2, p. 163

By:

Jang, D. W.;
Kim, K. H.

Publication type:

Article

Analysis and optimization of drum washing machine vibration isolation system based on rigid-flexible virtual prototype model.

Published in:

Journal of Vibroengineering, 2017, v. 19, n. 3, p. 1653, doi. 10.21595/jve.2017.17851

By:

Linjing Xiao;
Sen Zhang

Publication type:

Article