Análisis de esfuerzos mediante el método de elementos finitos de implantes dentales de titanio poroso.
- Published in:
- Ingeniería y Desarrollo, 2015, v. 33, n. 1, p. 80, doi. 10.14482/inde.33.1.6153
- By:
- Publication type:
- Article
Works matching DE "MECHANICAL stress analysis"
Results: 699
1
2
Predicted stresses in ball-grid-array (BGA) and column-grid-array (CGA) interconnections in a mirror-like package design.
- Published in:
- Journal of Materials Science: Materials in Electronics, 2016, v. 27, n. 3, p. 2430, doi. 10.1007/s10854-015-4042-8
- By:
- Publication type:
- Article
3
Analytical Solution to Study Depletion/Injection Rate on Induced Wellbore Stresses in an Anisotropic Stress Field.
- Published in:
- Geotechnical & Geological Engineering, 2018, v. 36, n. 3, p. 1735, doi. 10.1007/s10706-017-0429-z
- By:
- Publication type:
- Article
4
Dynamic Compaction Model Tests for the Characteristics of Red Clay Under equal Energy Level.
- Published in:
- Geotechnical & Geological Engineering, 2018, v. 36, n. 3, p. 1873, doi. 10.1007/s10706-017-0409-3
- By:
- Publication type:
- Article
5
Field Measurement of Stresses of Floor Slabs in Excavations.
- Published in:
- Geotechnical & Geological Engineering, 2017, v. 35, n. 3, p. 915, doi. 10.1007/s10706-016-0150-3
- By:
- Publication type:
- Article
6
Development and Application of a New Tensile Stress Model for Expansive Soils.
- Published in:
- Geotechnical & Geological Engineering, 2017, v. 35, n. 3, p. 1067, doi. 10.1007/s10706-017-0163-6
- By:
- Publication type:
- Article
7
Application of Convergence-Confinement Method in Analysis of Shallow Non-circular Tunnels.
- Published in:
- Geotechnical & Geological Engineering, 2017, v. 35, n. 3, p. 1185, doi. 10.1007/s10706-017-0173-4
- By:
- Publication type:
- Article
8
Assessment of Slope Stability for Deep Pits in Sedimentary Strata.
- Published in:
- Geotechnical & Geological Engineering, 2017, v. 35, n. 2, p. 631, doi. 10.1007/s10706-016-0130-7
- By:
- Publication type:
- Article
9
Investigation of Stability of the Critical Rock Blocks that Initiated the Jiweishan Landslide in China.
- Published in:
- Geotechnical & Geological Engineering, 2014, v. 32, n. 5, p. 1291, doi. 10.1007/s10706-014-9806-z
- By:
- Publication type:
- Article
10
The stresses in single lap joints with a functionally graded adhesive bondline: an efficient modelling approach.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 219, doi. 10.1002/pamm.201610098
- By:
- Publication type:
- Article
11
Null-Lagrangians and the indeterminate couple stress model.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 379, doi. 10.1002/pamm.201610178
- By:
- Publication type:
- Article
12
A finite elasto-plasticity model for thick adhesive layers based on generalized stress-strain measure.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2014, v. 14, n. 1, p. 359, doi. 10.1002/pamm.201410167
- By:
- Publication type:
- Article
13
Kinematic modeling of flexure hinges and compliant mechanisms.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2014, v. 14, n. 1, p. 189, doi. 10.1002/pamm.201410082
- By:
- Publication type:
- Article
14
Dual and mixed nonsymmetric stress-based variational formulations for coupled thermoelastodynamics with second sound effect.
- Published in:
- Continuum Mechanics & Thermodynamics, 2018, v. 30, n. 2, p. 319, doi. 10.1007/s00161-017-0605-7
- By:
- Publication type:
- Article
15
Emergence of New Concepts in Skin Physiopathology through the Use of in vitro Human Skin Explants Models.
- Published in:
- Dermatology (10188665), 2023, v. 239, n. 6, p. 849, doi. 10.1159/000533261
- By:
- Publication type:
- Article
16
Machine Computation Using the Exponentially Convergent Multiscale Spectral Generalized Finite Element Method.
- Published in:
- ESAIM: Mathematical Modelling & Numerical Analysis (ESAIM: M2AN), 2014, v. 48, n. 2, p. 493, doi. 10.1051/m2an/2013117
- By:
- Publication type:
- Article
17
驾驶机器人机械腿轻量化设计与动力学分析.
- Published in:
- Journal of Ordnance Equipment Engineering, 2024, v. 45, n. 9, p. 206, doi. 10.11809/bqzbgcxb2024.09.026
- By:
- Publication type:
- Article
18
Thermomechanical Analysis of PBF-LB/M AlSi7Mg0.6 with Respect to Rate-Dependent Material Behaviour and Damage Effects.
- Published in:
- Applied Mechanics, 2024, v. 5, n. 3, p. 533, doi. 10.3390/applmech5030030
- By:
- Publication type:
- Article
19
THERMAL POWER PLANT BASED ON A FREE PISTON ENGINE AND A RECIPROCATING GENERATOR.
- Published in:
- Eurasian Physical Technical Journal, 2022, v. 19, n. 1, p. 40, doi. 10.31489/2022No1/40-49
- By:
- Publication type:
- Article
20
Integration of substrate- and flow-derived stresses in endothelial cell mechanobiology.
- Published in:
- Communications Biology, 2021, v. 4, n. 1, p. 1, doi. 10.1038/s42003-021-02285-w
- By:
- Publication type:
- Article
21
Temperature-Stress Analysis of Rock-Shotcrete Structure under High Temperature Cooling Effect.
- Published in:
- Geotechnical Engineering (00465828), 2019, v. 50, n. 4, p. 58
- By:
- Publication type:
- Article
22
Pullout Tests on Strips with Anchorage Elements under Low Stresses.
- Published in:
- Geotechnical Engineering (00465828), 2017, v. 48, n. 2, p. 16
- By:
- Publication type:
- Article
23
On the Preconsolidation Pressure: Experience Based on Testing the Holocene Marine Clay of Peninsula Malaysia.
- Published in:
- 2016
- By:
- Publication type:
- Abstract
24
Fallacy of Capacity Performance & Innovation Improvement of Jack-In Piling in Malaysia.
- Published in:
- 2016
- By:
- Publication type:
- Abstract
25
A quick stress calculation method for flexspline in harmonic actuators based on the finite element method.
- Published in:
- Cogent Engineering, 2022, v. 9, n. 1, p. 1, doi. 10.1080/23311916.2022.2138123
- By:
- Publication type:
- Article
26
Finite element analysis and optimization of bonded post-tensioned concrete slabs.
- Published in:
- Cogent Engineering, 2017, v. 4, n. 1, p. 1, doi. 10.1080/23311916.2017.1341288
- By:
- Publication type:
- Article
27
Correlation analysis of mechanical properties of dilated packer cylinder.
- Published in:
- Vibroengineering Procedia, 2022, v. 43, p. 139, doi. 10.21595/vp.2022.22672
- By:
- Publication type:
- Article
28
Fracture strength estimation of L3-L4 intervertebral disc using FEA.
- Published in:
- Vibroengineering Procedia, 2019, v. 27, p. 67, doi. 10.21595/vp.2019.20976
- By:
- Publication type:
- Article
29
Transient vibration analysis of BTA deep-hole drilling shaft system.
- Published in:
- Vibroengineering Procedia, 2017, v. 15, p. 13, doi. 10.21595/vp.2017.19415
- By:
- Publication type:
- Article
30
Numerical calculation of wing-bending moment with real-time strain monitoring by FBG modulation.
- Published in:
- Vibroengineering Procedia, 2017, v. 14, p. 374, doi. 10.21595/vp.2017.19152
- By:
- Publication type:
- Article
31
Assessment of the interaction between three collinear unequal straight cracks with unified yield zones.
- Published in:
- AIMS Materials Science, 2017, v. 4, n. 2, p. 302, doi. 10.3934/matersci.2017.2.302
- By:
- Publication type:
- Article
32
Finite Element Model Based on Shear-Lag Theory for Prediction of Creep Stress in Al/Sic Composite.
- Published in:
- Modares Mechanical Engineering, 2020, v. 20, n. 2, p. 279
- By:
- Publication type:
- Article
33
Dynamic analysis of non-linear FE model of drillstring.
- Published in:
- Modares Mechanical Engineering, 2015, v. 14, n. 13, p. 119
- By:
- Publication type:
- Article
34
Magnetic Resonance Imaging Measurements in Engineering Science.
- Published in:
- Instrumentation, Mesures, Métrologies, 2020, v. 19, n. 3, p. 197, doi. 10.18280/i2m.190304
- By:
- Publication type:
- Article
35
OPTIMIZATION OF A CURVILINEAR THREAD PROFILE IN A PLANETARY ROLLER SCREW.
- Published in:
- Technical Transactions / Czasopismo Techniczne, 2015, n. 7, p. 149
- By:
- Publication type:
- Article
36
Vibration Analysis and Experimental Research of the Linear-Motor-Driven Water Piston Pump Used in the Naval Ship.
- Published in:
- Shock & Vibration, 2016, p. 1, doi. 10.1155/2016/4608328
- By:
- Publication type:
- Article
37
A Numerical Study of Underground Cavern Stability by Geostress Characteristics.
- Published in:
- Shock & Vibration, 2016, p. 1, doi. 10.1155/2016/3768453
- By:
- Publication type:
- Article
38
Kinematic and isotropic strain hardening in copper with highly aligned nanoscale twins.
- Published in:
- Materials Research Letters, 2018, v. 6, n. 6, p. 333, doi. 10.1080/21663831.2018.1455752
- By:
- Publication type:
- Article
39
Heterogeneous materials: a new class of materials with unprecedented mechanical properties.
- Published in:
- Materials Research Letters, 2017, v. 5, n. 8, p. 527, doi. 10.1080/21663831.2017.1343208
- By:
- Publication type:
- Article
40
Elastic model for stress–tensor-induced martensitic transformation and lattice instability in silicon under large strains.
- Published in:
- Materials Research Letters, 2017, v. 5, n. 8, p. 554, doi. 10.1080/21663831.2017.1362054
- By:
- Publication type:
- Article
41
Impact of packaging stress on thinned 6T SRAM die.
- Published in:
- International Journal of Electronics Letters, 2020, v. 8, n. 1, p. 38, doi. 10.1080/21681724.2018.1545924
- By:
- Publication type:
- Article
42
Particle Size Distribution Effects on the Strength Characteristic of Cemented Paste Backfill.
- Published in:
- Minerals (2075-163X), 2018, v. 8, n. 8, p. 322, doi. 10.3390/min8080322
- By:
- Publication type:
- Article
43
STRESS GRADIENT EFFECTS ON THE NUCLEATION AND PROPAGATION OF COHESIVE CRACKS.
- Published in:
- Discrete & Continuous Dynamical Systems - Series S, 2016, v. 9, n. 2, p. 557, doi. 10.3934/dcdss.2016012
- By:
- Publication type:
- Article
44
DESIGN AND STRESS ANALYSIS OF THE SCREW OF THE MECHANICAL PRESS TO OBTAIN GRAPE SEED OIL.
- Published in:
- Acta Technica Corviniensis - Bulletin of Engineering, 2023, v. 16, n. 3, p. 99
- By:
- Publication type:
- Article
45
THE STRUCTURAL DESIGN AND STRENGTH CALCULATION WORM EXTRUSION MACHINES FOR PRODUCING PLASTIC PROFILES.
- Published in:
- Acta Technica Corviniensis - Bulletin of Engineering, 2012, v. 5, n. 3, p. 107
- By:
- Publication type:
- Article
46
Towards Aiding Decision-Making in Social Networks by Using Sentiment and Stress Combined Analysis.
- Published in:
- Information (2078-2489), 2018, v. 9, n. 5, p. 107, doi. 10.3390/info9050107
- By:
- Publication type:
- Article
47
EFFECT OF STRESS-STRAIN STATE ON STRUCTURE AND PROPERTIES OF JOINTS IN DIFFUSION WELDING OF DISSIMILAR METALS.
- Published in:
- Paton Welding Journal, 2014, n. 8, p. 8, doi. 10.15407/tpwj2014.08.01
- By:
- Publication type:
- Article
48
STRESS-STRAIN STATE AT FORCE AND TEMPERATURE LOADING OF ASSEMBLES FROM DISSIMILAR STEELS WITH SOFT INTERLAYER.
- Published in:
- Paton Welding Journal, 2014, n. 8, p. 21, doi. 10.15407/tpwj2014.08.03
- By:
- Publication type:
- Article
49
Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model.
- Published in:
- Advances in Civil Engineering, 2019, p. 1, doi. 10.1155/2019/5234327
- By:
- Publication type:
- Article
50
Seepage Law of Injected Water in the Coal Seam to Prevent Rock Burst Based on Coal and Rock System Energy.
- Published in:
- Advances in Civil Engineering, 2018, p. 1, doi. 10.1155/2018/8687108
- By:
- Publication type:
- Article