Works matching DE "ALUMINUM alloy fatigue"
Results: 224
Residual stresses in aluminium alloy friction stir welds.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 56, n. 5-8, p. 493, doi. 10.1007/s00170-011-3210-0
- By:
- Publication type:
- Article
Comparative Study of Fatigue Properties in Friction Stir Welded Dissimilar Aluminium Alloys (AA5083-H111 and AA6061-T6) Using an Optimized Tool Pin Profile Versus a Standard Design Tool.
- Published in:
- Annales de Chimie Science des Matériaux, 2024, v. 48, n. 6, p. 845, doi. 10.18280/acsm.480610
- By:
- Publication type:
- Article
Modeling of Fatigue Crack Propagation in Aluminum Alloys Using an Energy Based Approach.
- Published in:
- Engineering, Technology & Applied Science Research, 2013, v. 3, n. 4, p. 488, doi. 10.48084/etasr.329
- By:
- Publication type:
- Article
Investigation of stress intensity factor for overloaded holes and cold expanded holes.
- Published in:
- Australian Journal of Mechanical Engineering, 2011, v. 8, n. 2, p. 177, doi. 10.1080/14484846.2011.11464609
- By:
- Publication type:
- Article
The Calculation of Fatigue Lifetime of Constructional Aluminium Alloys under Asymmetric Tension-Compression Loading by the Method of Equivalent Stress.
- Published in:
- Naukovi visti NTUU - KPI, 2011, v. 2011, n. 6, p. 114
- By:
- Publication type:
- Article
Formation of nickel aluminide/nickel hybrid coatings on alloy steels by two step process of nickel plating and low temperature pack aluminisation.
- Published in:
- Materials Science & Technology, 2009, v. 25, n. 6, p. 733, doi. 10.1179/174328407X245111
- By:
- Publication type:
- Article
Comparative study of dynamic impact properties and microstructures of weldable and unweldable aluminium-scandium (Al-Sc) alloys.
- Published in:
- Materials Science & Technology, 2009, v. 25, n. 6, p. 711, doi. 10.1179/174328408X393413
- By:
- Publication type:
- Article
Room temperature hardness of carbide strengthened cast alloys in relation with their carbon content and aging temperature Part 1 - Case of nickel alloys.
- Published in:
- Materials Science & Technology, 2009, v. 25, n. 5, p. 657, doi. 10.1179/174328408X339242
- By:
- Publication type:
- Article
Tensile and fatigue properties of 6063-T6 aluminium alloy coated with electroless Ni–P deposit.
- Published in:
- Materials Science & Technology, 2007, v. 23, n. 3, p. 253, doi. 10.1179/174328407X157317
- By:
- Publication type:
- Article
Fatigue of continuous cast AA5754 Al alloy sheet.
- Published in:
- Materials Science & Technology, 2007, v. 23, n. 3, p. 324, doi. 10.1179/174328407X158677
- By:
- Publication type:
- Article
Three-dimensional imaging of materials by microtomography.
- Published in:
- Materials Science & Technology, 2006, v. 22, n. 9, p. 1009, doi. 10.1179/174328406X118221
- By:
- Publication type:
- Article
High-cycle fatigue bending strength of rapidly solidified and plastic consolidated RS442 aluminium alloy.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 13, p. 4796, doi. 10.1007/s10853-013-7238-4
- By:
- Publication type:
- Article
Effect of a brazing process on mechanical and fatigue behavior of alclad aluminum 3005.
- Published in:
- Journal of Mechanical Science & Technology, 2012, v. 26, n. 7, p. 2111, doi. 10.1007/s12206-012-0525-1
- By:
- Publication type:
- Article
基于正交试验的Ⅲ型储氢气瓶内衬结构多因素疲劳性能优化.
- Published in:
- Chemical Engineering of Oil & Gas / Shi You Yu Tian Ran Qi Hua Gong, 2022, v. 51, n. 6, p. 41, doi. 10.3969/j.issn.1007-3426.2022.06.007
- By:
- Publication type:
- Article
Fatigue strength optimisation of friction stir welded A6005-T5 alloy sheets.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 6, p. 473, doi. 10.1179/136217110X12785889549705
- By:
- Publication type:
- Article
Effect of the stiffness ratio on the growth of repaired fatigue cracks with composite patch.
- Published in:
- Mechanics Based Design of Structures & Machines, 2024, v. 52, n. 5, p. 2679, doi. 10.1080/15397734.2023.2189941
- By:
- Publication type:
- Article
Fatigue performance on 7050 aluminum alloy by using ultrasonic vibration-assisted hole expansion strengthening.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 5153, doi. 10.1007/s00170-023-12234-y
- By:
- Publication type:
- Article
Dissimilar ultrasonic spot welding of ZEK100 magnesium alloy to a clad AA7075 aluminum alloy: Tensile and fatigue properties.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3561, doi. 10.1007/s00170-023-12112-7
- By:
- Publication type:
- Article
Vibratory finishing for the cavity of aero-engine integral casting casing: mechanism analysis and performance evaluation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 713, doi. 10.1007/s00170-022-10728-9
- By:
- Publication type:
- Article
INVESTIGATION OF LOW- AND HIGH-CYCLE FATIGUE IN AL 2024-T4 ALLOY.
- Published in:
- Technical Sciences (1505-4675), 2020, v. 23, n. 4, p. 309, doi. 10.31648/ts.6087
- By:
- Publication type:
- Article
Estimation of Fatigue Limit for Aluminum Alloy Laser Welds Based on Dissipated Energy.
- Published in:
- Experimental Mechanics, 2025, v. 65, n. 3, p. 385, doi. 10.1007/s11340-025-01148-3
- By:
- Publication type:
- Article
Investigating the Mechanism of Facet Formation and the Influence of Crack Initiation Size on a Cast Aluminum Alloy in Ultrasonic Fatigue Under Varied Humidity Environments.
- Published in:
- Experimental Mechanics, 2024, v. 64, n. 1, p. 129, doi. 10.1007/s11340-023-01014-0
- By:
- Publication type:
- Article
Influence of Low-Temperature Stress-Relieving Treatment in the Fatigue Life of Components Produced by Laser Powder Bed Fusion in AlSi10Mg.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 1, p. 112, doi. 10.3390/app15010112
- By:
- Publication type:
- Article
Texture Evolution and Control of 2524 Aluminum Alloy and Its Effect on Fatigue Crack Propagation Behavior.
- Published in:
- Applied Sciences (2076-3417), 2021, v. 11, n. 12, p. 5550, doi. 10.3390/app11125550
- By:
- Publication type:
- Article
Study on Microstructure and Fatigue Damage Mechanism of 6082 Aluminum Alloy T-Type Metal Inert Gas (MIG) Welded Joint.
- Published in:
- Applied Sciences (2076-3417), 2018, v. 8, n. 10, p. 1741, doi. 10.3390/app8101741
- By:
- Publication type:
- Article
R-ratio effect and crack closure model in Al-alloy.
- Published in:
- Nature & Technology / Nature & Technologie, 2016, v. A-C, n. 15, p. 9
- By:
- Publication type:
- Article
Effect of Residual Stresses Resulting from Plastic Beam Bending: Technique on Fatigue Crack Initiation.
- Published in:
- Nature & Technology / Nature & Technologie, 2016, v. A-C, n. 15, p. 2
- By:
- Publication type:
- Article
Relationship between Stress State and Microstructure of 7B04 Aluminum Alloy Surface Fatigue Properties by Laser Shock Peening Improvement.
- Published in:
- Coatings (2079-6412), 2022, v. 12, n. 10, p. 1556, doi. 10.3390/coatings12101556
- By:
- Publication type:
- Article
Fatigue Properties of Aluminum Alloy Sheet Treated with Shot-Peen Forming in Salt-Spray Environment.
- Published in:
- Coatings (2079-6412), 2022, v. 12, n. 9, p. N.PAG, doi. 10.3390/coatings12091237
- By:
- Publication type:
- Article
Effect of Mean Stress on the Fatigue Life Prediction of Notched Fiber-Reinforced 2060 Al-Li Alloy Laminates under Spectrum Loading.
- Published in:
- Advances in Materials Science & Engineering, 2018, p. 1, doi. 10.1155/2018/5728174
- By:
- Publication type:
- Article
Thermal Fatigue Model of Aluminium Alloy Die Casting H-13 Dies under Thermo-Mechanical Cycle.
- Published in:
- Mechanika, 2021, v. 27, n. 5, p. 385, doi. 10.5755/j02.mech.25765
- By:
- Publication type:
- Article
Effects of water jet peening on residual stresses, roughness, and fatigue.
- Published in:
- Surface Engineering, 2021, v. 37, n. 8, p. 972, doi. 10.1080/02670844.2020.1850196
- By:
- Publication type:
- Article
MECHANICAL PROPERTIES OF AVIATION ALUMINUM–LITHIUM ALLOY SAMPLES OBTAINED BY PLASMA-ASSISTED LASER CUTTING.
- Published in:
- Journal of Applied Mechanics & Technical Physics, 2024, v. 65, n. 1, p. 18, doi. 10.1134/S0021894424010036
- By:
- Publication type:
- Article
Creep and Low Cycle Fatigue Investigations of Light Aluminium Alloys for Engine Cylinder Heads.
- Published in:
- Strain, 2011, v. 47, p. 374, doi. 10.1111/j.1475-1305.2010.00779.x
- By:
- Publication type:
- Article
A Biaxial Fatigue Specimen for Uniaxial Loading.
- Published in:
- Strain, 2011, v. 47, n. 3, p. 227, doi. 10.1111/j.1475-1305.2009.00674.x
- By:
- Publication type:
- Article
Evaluation of Thermal Barrier Coating in Fatigue Life for an Aluminum Alloy Piston with Considering Residual Stress.
- Published in:
- Journal of Solid Mechanics, 2023, v. 15, n. 3, p. 343, doi. 10.22034/jsm.2023.1979235.1766
- By:
- Publication type:
- Article
EFFECT OF MN ADDITION ON THE CORROSION AND FATIGUE PROPERTIES OF A PROGRESSIVE SECONDARY A357 ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2024, v. 69, n. 3, p. 1123, doi. 10.24425/amm.2024.150933
- By:
- Publication type:
- Article
THE INFLUENCE OF THE STRUCTURE ON THE FATIGUE PROPERTIES OF Al-Mg CAST ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2017, v. 62, n. 3, p. 1615, doi. 10.1515/amm-2017-0247
- By:
- Publication type:
- Article
STUDY OF BENDING FATIGUE PROPERTIES OF Al-Si CAST ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2017, v. 62, n. 3, p. 1591, doi. 10.1515/amm-2017-0243
- By:
- Publication type:
- Article
Characterization of internal fatigue cracks in aluminum alloys by simulation of phase contrast tomography.
- Published in:
- Scientific Reports, 2022, v. 12, n. 1, p. 1, doi. 10.1038/s41598-022-09811-8
- By:
- Publication type:
- Article
Study of Vibration‐Ultrasonic Combined Fatigue on 7075‐T6 Aluminum Alloy.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 1, p. 231, doi. 10.1111/ffe.14466
- By:
- Publication type:
- Article
A Hybrid Framework for Characterizing and Benchmarking Fatigue S‐N Curves in Aluminum Alloys by Integrating Empirical and Data‐Driven Approaches.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 1, p. 44, doi. 10.1111/ffe.14459
- By:
- Publication type:
- Article
Corrosion fatigue crack growth model for aluminum alloys in jet fuel.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 12, p. 4432, doi. 10.1111/ffe.14438
- By:
- Publication type:
- Article
Overhead conductor heating chamber and temperature effects on the fatigue life of aluminum alloy 6201‐T81 conductors.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 11, p. 4151, doi. 10.1111/ffe.14421
- By:
- Publication type:
- Article
Fatigue strength improvement of aluminum alloy with surface defect by ball burnishing.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 9, p. 3464, doi. 10.1111/ffe.14372
- By:
- Publication type:
- Article
Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 2, p. 453, doi. 10.1111/ffe.14203
- By:
- Publication type:
- Article
Characterization of fatigue behavior of AA2024‐T351 aluminum alloy.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2023, v. 46, n. 10, p. 3729, doi. 10.1111/ffe.14102
- By:
- Publication type:
- Article
Casting and spinning aluminum alloy wheel fatigue properties and life prediction study.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2023, v. 46, n. 9, p. 3446, doi. 10.1111/ffe.14085
- By:
- Publication type:
- Article
Effect of artificial aging time on torsional fatigue life and cyclic behavior of AA6351 aluminum alloy and evaluation of estimation methods.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2023, v. 46, n. 8, p. 2895, doi. 10.1111/ffe.14051
- By:
- Publication type:
- Article
Subsurface fatigue crack tip strains in 7475‐T7351 aluminium alloy measured using stroboscopic neutron diffraction.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2023, v. 46, n. 5, p. 1735, doi. 10.1111/ffe.13955
- By:
- Publication type:
- Article