Works matching DE "UNIVERSAL testing machines (Engineering)"
Results: 276
Fracture Resistance of Endodontically Treated Maxillary Premolars with Non-carious Cervical Lesions Restored with Different Post Systems.
- Published in:
- European Endodontic Journal, 2023, v. 8, n. 1, p. 65, doi. 10.14744/eej.2022.96720
- By:
- Publication type:
- Article
Fracture Resistance of Endodontically Treated Premolars Restored with Flowable Short Fibre-Reinforced Resin Composite--An In Vitro Study.
- Published in:
- European Endodontic Journal, 2022, v. 7, n. 2, p. 161, doi. 10.14744/eej.2021.07830
- By:
- Publication type:
- Article
Influence of Different Fibreglass Post Geometries on the Stress Distribution and Pull-Out Bond Strength Before and After Mechanical Cycling.
- Published in:
- European Endodontic Journal, 2021, v. 6, n. 2, p. 170, doi. 10.14744/eej.2020.95967
- By:
- Publication type:
- Article
EVALUATION OF THE FORCE DEGRADATION OF DIFFERENT TYPES OF ORTHODONTIC INTERMAXILLARY ELASTICS AT DIFFERENT TIME INTERVALS – IN VITRO STUDY.
- Published in:
- Knowledge: International Journal, 2024, v. 65, n. 4, p. 363
- By:
- Publication type:
- Article
轧制工艺对 MnCuNiFe 合金组织、织构与 阻尼性能的影响.
- Published in:
- Nonferrous Metals Engineering, 2022, v. 12, n. 5, p. 44, doi. 10.3969/j.issn.2095-1744.2022.05.06
- By:
- Publication type:
- Article
Preparation and Characterization of TPS-PBAT Composites.
- Published in:
- Plastics Science & Technology / Suliao Ke-Ji, 2024, v. 52, n. 5, p. 117, doi. 10.15925/j.cnki.issn1005-3360.2024.05.026
- By:
- Publication type:
- Article
Study on cross-directional tensile properties of bamboo-/polypropylene-blended needle-punched non-woven fabrics.
- Published in:
- Journal of Industrial Textiles, 2018, v. 47, n. 6, p. 1342, doi. 10.1177/1528083717690611
- By:
- Publication type:
- Article
Utilization of Construction Waste Tiles as a Replacement for Fine Aggregates in Concrete.
- Published in:
- Engineering, Technology & Applied Science Research, 2017, v. 7, n. 5, p. 1930, doi. 10.48084/etasr.1071
- By:
- Publication type:
- Article
复合纸板力学性能和应变率相关性测试与表征.
- Published in:
- Journal of Nanjing University of Aeronautics & Astronautics / Nanjing Hangkong Hangtian Daxue Xuebao, 2020, v. 52, n. 3, p. 438, doi. 10.16356/j.1005-2615.2020.03.012
- By:
- Publication type:
- Article
An In Vitro Study Comparing The Shear Bond Strength Of Three Orthodontic Bonding Adhesive.
- Published in:
- Indian Journal of Dental Sciences, 2015, v. 7, n. 3, p. 007
- By:
- Publication type:
- Article
Influence Of Retention Grooves In Acrylic Resin Teeth On Tooth-denture Base Bond Strength.
- Published in:
- Indian Journal of Dental Sciences, 2013, v. 5, n. 2, p. 032
- By:
- Publication type:
- Article
Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem.
- Published in:
- PLoS ONE, 2024, v. 19, n. 4, p. 1, doi. 10.1371/journal.pone.0300956
- By:
- Publication type:
- Article
Models of mechanical cutting parameters in terms of moisture content and cross section area of sugarcane stalks.
- Published in:
- Agricultural Engineering International: CIGR Journal, 2014, v. 16, n. 1, p. 280
- By:
- Publication type:
- Article
Effect of liner offset and inclination on cement retention strength of metal‐in‐metal acetabular constructs: A biomechanical study.
- Published in:
- Journal of Orthopaedic Research, 2021, v. 39, n. 4, p. 813, doi. 10.1002/jor.24807
- By:
- Publication type:
- Article
Surface modification and biotribological behavior of UHMWPE nanocomposites with GO infiltrated by ultrasonic induction.
- Published in:
- Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2021, v. 109, n. 6, p. 808, doi. 10.1002/jbm.b.34746
- By:
- Publication type:
- Article
DEVELOPMENT OF HIGH FIDELITY FINITE ELEMENT MODEL OF MOTORCYCLE TELESCOPIC FRONT FORK.
- Published in:
- International Journal of Simulation Modelling (IJSIMM), 2016, v. 15, n. 3, p. 436, doi. 10.2507/IJSIMM15(3)4.344
- By:
- Publication type:
- Article
Shape memory properties of multi-walled carbon nanotube/polyurethane composites prepared by in situ polymerization.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 5, p. 2207, doi. 10.1007/s10853-012-6996-8
- By:
- Publication type:
- Article
A biomechanical study on suture anchor insertion angle: Which is better, 90° or 45°?
- Published in:
- 2017
- By:
- Publication type:
- journal article
Similar biomechanical properties of four tripled tendon graft models for ACL reconstruction.
- Published in:
- Archives of Orthopaedic & Trauma Surgery, 2022, v. 142, n. 6, p. 1155, doi. 10.1007/s00402-021-04030-8
- By:
- Publication type:
- Article
Contact mechanics after mattress suture repair of medial meniscus vertical longitudinal tear: an in vitro study.
- Published in:
- 2020
- By:
- Publication type:
- journal article
Biomechanical evaluation of suture buttons versus cortical screws in the Latarjet-Bristow procedure: a fresh-frozen cadavers study.
- Published in:
- 2019
- By:
- Publication type:
- journal article
Biomechanical Comparison of a Horizontal Mattress, Cross Suture and Vertical Mattress for Repair of a Tendon Weave in a Porcine Model.
- Published in:
- Journal of Hand Surgery (Asian-Pacific Volume), 2022, v. 27, n. 4, p. 439, doi. 10.1142/S2424835522500436
- By:
- Publication type:
- Article
Proposed Feedback-Linearized Integral Sliding Mode Control for an Electro-Hydraulic Servo Material Testing Machine.
- Published in:
- Machines, 2024, v. 12, n. 3, p. 164, doi. 10.3390/machines12030164
- By:
- Publication type:
- Article
Development of a Delamination Fatigue Testing Machine for Composite Materials.
- Published in:
- Machines, 2019, v. 7, n. 2, p. 27, doi. 10.3390/machines7020027
- By:
- Publication type:
- Article
基于力声信息融合感知的香梨果肉脆度评价.
- Published in:
- Transactions of the Chinese Society of Agricultural Engineering, 2024, v. 40, n. 17, p. 314, doi. 10.11975/j.issn.1002-6819.202404086
- By:
- Publication type:
- Article
木质素基水性聚氨酯/聚乙烯醇共混膜制备及性能.
- Published in:
- Transactions of the Chinese Society of Agricultural Engineering, 2024, v. 40, n. 16, p. 202, doi. 10.11975/j.issn.1002-6819.202405015
- By:
- Publication type:
- Article
花生种子颗粒离散元仿真参数标定与试验.
- Published in:
- Transactions of the Chinese Society of Agricultural Engineering, 2020, v. 36, n. 23, p. 30, doi. 10.11975/j.issn.1002-6819.2020.23.004
- By:
- Publication type:
- Article
Theoretical and Experimental Study on Damage Properties of Surrounding Rock under High-Frequency Constant Impact Load.
- Published in:
- Shock & Vibration, 2019, p. 1, doi. 10.1155/2019/7275425
- By:
- Publication type:
- Article
Impacto de baja energía y resistencia a tracción de laminados bioepoxi-fibra de cáñamo, antes y después de su inmersión en agua de mar.
- Published in:
- Iteckne, 2014, v. 11, n. 2, p. 190, doi. 10.15332/iteckne.v11i2.732
- By:
- Publication type:
- Article
Effect of Insertional Direction of Pedicle Screw on Screw Loosening: A Biomechanical Study on Synthetic Bone Vertebra under a Physiology‐like Load.
- Published in:
- Orthopaedic Surgery, 2024, v. 16, n. 6, p. 1461, doi. 10.1111/os.14080
- By:
- Publication type:
- Article
Bone Hardness of Different Anatomical Regions of Human Radius and its Impact on the Pullout Strength of Screws.
- Published in:
- Orthopaedic Surgery, 2019, v. 11, n. 2, p. 270, doi. 10.1111/os.12436
- By:
- Publication type:
- Article
Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 17, p. 2395, doi. 10.3390/polym16172395
- By:
- Publication type:
- Article
Influence of Dilution on the Mechanical Properties and Microstructure of Polyurethane-Cement Based Composite Surface Coating.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 1, p. 146, doi. 10.3390/polym16010146
- By:
- Publication type:
- Article
Research on the Impact Initiation Behavior of PTFE/Al/Ni 2 O 3 Reactive Materials.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 21, p. 4629, doi. 10.3390/polym14214629
- By:
- Publication type:
- Article
Evaluating Pull-Out Strength of Barbed Suture In Vitro by Using Porcine Tissue and Polydimethylsiloxane (PDMS).
- Published in:
- Polymers (20734360), 2022, v. 14, n. 11, p. 2170, doi. 10.3390/polym14112170
- By:
- Publication type:
- Article
Preparation of Bis[(3-ethyl-3-methoxyoxetane)propyl]diphenylsilane and Investigation of Its Cationic UV-Curing Material Properties.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 15, p. 2573, doi. 10.3390/polym13152573
- By:
- Publication type:
- Article
Effect of Sintering Factors on Properties of Al-Rich PTFE/Al/TiH 2 Active Materials.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 11, p. 1705, doi. 10.3390/polym13111705
- By:
- Publication type:
- Article
Integration of a new data acquisition/processing scheme in SHPB test and characterization of the dynamic material properties of high-strength steels using the optional form of Johnson-Cook model.
- Published in:
- Journal of Mechanical Science & Technology, 2014, v. 28, n. 9, p. 3561, doi. 10.1007/s12206-014-0817-8
- By:
- Publication type:
- Article
Geological Core Ground Reorientation Technology Application on In Situ Stress Measurement of an Over-Kilometer-Deep Shaft.
- Published in:
- Advances in Civil Engineering, 2020, p. 1, doi. 10.1155/2020/8830593
- By:
- Publication type:
- Article
Aligned Cellulose Nanocrystal Composite Filament with High Tensile Strength Enhanced by Cationic Polyacrylamide via Flow Focusing Approach.
- Published in:
- BioResources, 2023, v. 18, n. 3, p. 5813, doi. 10.15376/biores.18.3.5813-5837
- By:
- Publication type:
- Article
Influence on the Physical Properties of Wheat Straw via Hydrothermal and Chemical Treatments.
- Published in:
- BioResources, 2016, v. 11, n. 3, p. 7345, doi. 10.15376/biores.11.3.7345-7354
- By:
- Publication type:
- Article
Effect of Particle Size on Mechanical Properties of Sawdust-High Density Polyethylene Composites under Various Strain Rates.
- Published in:
- BioResources, 2016, v. 11, n. 3, p. 6489, doi. 10.15376/biores.11.3.6489-6504
- By:
- Publication type:
- Article
Comparative evaluation of push‑out bond strength of three retrograde filling materials in teeth with root apices resected at 90°: Mineral trioxide aggregate Angelus, Zirconomer, and Bioactive bone cement.
- Published in:
- Journal of Conservative Dentistry, 2022, v. 25, n. 6, p. 605, doi. 10.4103/jcd.jcd_268_22
- By:
- Publication type:
- Article
Mechanical Analyses of Quadriceps Tendon Graft with Five Different Fixation Techniques on the Femoral Side: an Experimental Study on Sheep Knees.
- Published in:
- Acta Chirurgiae Orthopaedicae et Traumatologiae Čechoslovaca, 2022, v. 89, n. 4, p. 293, doi. 10.55095/achot2022/047
- By:
- Publication type:
- Article
Calcaneotibial screws for immobilisation of the tarsocrural joint of dogs in extension: effect of the angle of screw placement on the force to failure in a canine cadaveric model.
- Published in:
- New Zealand Veterinary Journal, 2021, v. 69, n. 5, p. 294, doi. 10.1080/00480169.2021.1931522
- By:
- Publication type:
- Article
Seismic Resistance Evaluation of Traditional Ottoman Timber-Frame Hımış Houses: Frame Loadings and Material Tests.
- Published in:
- Earthquake Spectra, 2014, v. 30, n. 4, p. 1711, doi. 10.1193/011412EQS011M
- By:
- Publication type:
- Article
Mechanical properties evaluation of metacarpophalangeal joint prosthesis with new titanium-nickel memory alloy: a cadaver study.
- Published in:
- BMC Musculoskeletal Disorders, 2023, v. 24, n. 1, p. 1, doi. 10.1186/s12891-023-06859-z
- By:
- Publication type:
- Article
Influence of hyaluronic acid on intra-articular friction - a biomechanical study in whole animal joints.
- Published in:
- 2022
- By:
- Publication type:
- journal article
In vitro retention force measurement for three different attachment systems for implant-retained overdenture.
- Published in:
- Journal of Indian Prosthodontic Society, 2016, v. 16, n. 4, p. 380, doi. 10.4103/0972-4052.191284
- By:
- Publication type:
- Article
Comparative evaluation of bond strength of all-metal crowns with different luting agents after undergoing various modes of surface treatments: An in-vitro study.
- Published in:
- Journal of Indian Prosthodontic Society, 2015, v. 15, n. 4, p. 318, doi. 10.4103/0972-4052.161557
- By:
- Publication type:
- Article