Properties of multi-laminated plywood produced with Hovenia dulcis Thunb. and Pinus elliottii wood under different pressing pressures.

Bednarczuk, Ezaquel; Hillig, Éverton; Nogueira Dias, Andrea; Fábio Machado, João; Chagas Mustefaga, Erick

This study aimed at evaluating the effect of different pressing pressures and the influence of the wood features on the properties of plywood produced with sapwood and heartwood Hovenia dulcis combined with Pinus elliottii. To support the discussion, the anatomical and physical characterizations of the wood were carried out. The panels were produced by applying three different press pressures (0.88, 1.18 and 1.47 MPa) and with six combinations of wood veneers. Phenol-formaldehyde resin was employed, 160 g m-2 in a simple line and 35% solid content. The anatomical analysis revealed that the sapwood is more permeable than the H. dulcis heartwood. The H. dulcis wood basic density it was higher than that of the P. elliottii. Increased press pressure raised the values of the apparent density, thickness swelling and thickness swelling plus recovery of the plywood and water absorption reduction. The panels produced with H. dulcis veneers presented higher apparent density, MOR, MOE and bonding line resistance, as well as lower water absorption and moisture content, than those produced with P. elliottii veneers. No difference was noticed regarding the plywood properties when the main effects were evaluated in relation to the use of H. dulcis heartwood and sapwood veneers.

PLYWOOD; SAPWOOD; HEARTWOOD; HOVENIA dulcis; SLASH pine; FORMALDEHYDE

Acta Scientiarum: Technology, 2017, Vol 39, Issue 2, p185

1806-2563

Academic Journal

10.4025/actascitechnol.v39i2.29496