Works matching DE "TRIBOLOGICAL ceramics"
Results: 223
Microstructure, morphology, adhesion and tribological behavior of sputtered niobium carbide and bismuth films on tool steel.
- Published in:
- Revista Ingeniería e Investigación, 2014, v. 34, n. 3, p. 12, doi. 10.15446/ing.investig.v34n3.41938
- By:
- Publication type:
- Article
TRIBOLOGICAL STUDIES REGARDING THE CRUDE RAPESEED OIL PRESS.
- Published in:
- Annals of the University Dunarea de Jos of Galati: Fascicle IX, Metallurgy & Materials Science, 2016, v. 34, n. 3, p. 5
- By:
- Publication type:
- Article
TRIBOLOGICAL TESTING OF POLYMERIC MATERIAL.
- Published in:
- Annals of DAAAM & Proceedings, 2016, v. 27, p. 428, doi. 10.2507/27th.daaam.proceedings.063
- By:
- Publication type:
- Article
A Study on Surface Modification of A17075-T6 Alloy against Fretting Fatigue Phenomenon.
- Published in:
- Advances in Materials Science & Engineering, 2014, p. 1, doi. 10.1155/2014/474723
- By:
- Publication type:
- Article
Tribological characteristics of high temperature aged FKM O‐rings under abrasive conditions.
- Published in:
- 2019
- By:
- Publication type:
- Abstract
The Choice of the Operation Mode of Wear-Resistant Details by Analyzing Friction Films.
- Published in:
- Naukovi visti NTUU - KPI, 2012, v. 82, n. 2, p. 133
- By:
- Publication type:
- Article
Microstructure and Tribological Properties of In situ-Synthesized WC-Reinforced Ni60 Coatings Prepared by Laser Cladding with Different Scanning Rates.
- Published in:
- Journal of Thermal Spray Technology, 2024, v. 33, n. 5, p. 1404, doi. 10.1007/s11666-024-01781-9
- By:
- Publication type:
- Article
Investigation on the Tribological Behavior of Arc-Sprayed and Hammer-Peened Coatings Using Tungsten Carbide Cored Wires.
- Published in:
- Journal of Thermal Spray Technology, 2017, v. 26, n. 1/2, p. 229, doi. 10.1007/s11666-016-0447-z
- By:
- Publication type:
- Article
Microstructure and Sliding Wear Performance of CrC-(Ni,Cr)(Al,Cr) Coating Deposited from CrC In Situ Formed Atomized Powder.
- Published in:
- Journal of Thermal Spray Technology, 2017, v. 26, n. 1/2, p. 254, doi. 10.1007/s11666-016-0498-1
- By:
- Publication type:
- Article
铜渣尾矿用作沥青混合料填料的 性能及应用机理.
- Published in:
- Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 5, p. 1740
- By:
- Publication type:
- Article
TRIBOLOGICAL AND SURFACE BEHAVIOUR OF AA 6061/Al<sub>2</sub>O<sub>3</sub>/ NANO GRAPHITE HYBRID COMPOSITE USING STIR CASTING.
- Published in:
- Journal of the Balkan Tribological Association, 2016, v. 22, n. 3-I, p. 2218
- By:
- Publication type:
- Article
TRIBOLOGICAL PROPERTIES OF PTFE COMPOSITES WITH CERAMIC PARTICLES AND NANO-CuO ADDITION.
- Published in:
- Journal of the Balkan Tribological Association, 2016, v. 22, n. 2-II, p. 1376
- By:
- Publication type:
- Article
EFFECT OF ULEXITE AND CASHEW ON THE WEAR AND FRICTION CHARACTERISTICS OF AUTOMOTIVE BRAKE PAD.
- Published in:
- Journal of the Balkan Tribological Association, 2016, v. 22, n. 1A-I, p. 566
- By:
- Publication type:
- Article
COMPARATIVE STUDY OF WEAR RESISTANCE OF TiO<sub>2</sub> COATINGS WITH CERIUM AND CHROMIUM ADDITIVES.
- Published in:
- Journal of the Balkan Tribological Association, 2015, v. 21, n. 4, p. 857
- By:
- Publication type:
- Article
Advanced Machining of Joint Implant UHMWPE Inserts.
- Published in:
- Machines, 2022, v. 10, n. 11, p. 1008, doi. 10.3390/machines10111008
- By:
- Publication type:
- Article
Tribological Properties of Surface-Modified Graphene Filled Carbon Fabric/Polyimide Composites.
- Published in:
- Journal of Macromolecular Science: Physics, 2019, v. 58, n. 6, p. 603, doi. 10.1080/00222348.2019.1614276
- By:
- Publication type:
- Article
Effects of mechanical strength, working temperature and wax lubricant on tribological behavior of polystyrene.
- Published in:
- Journal of Polymer Engineering, 2016, v. 36, n. 7, p. 723, doi. 10.1515/polyeng-2015-0253
- By:
- Publication type:
- Article
Tribological Characterization of a Novel Ceramic–Epoxy–Kevlar Composite.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 6, p. 785, doi. 10.3390/polym16060785
- By:
- Publication type:
- Article
Effects of Simulation-Guided Microwave Presintering Process on the Preparation and Final Properties of Pure Ceramic Rings: Lower Sintering Temperature and Higher Mechanical Properties.
- Published in:
- Advances in Materials Science & Engineering, 2020, p. 1, doi. 10.1155/2020/8726407
- By:
- Publication type:
- Article
Processing of Sliding Hybrid Composites with Aluminum Alloy Matrix Containing Solid Lubricants.
- Published in:
- Materials & Manufacturing Processes, 2016, v. 31, n. 10, p. 1324, doi. 10.1080/10426914.2015.1127940
- By:
- Publication type:
- Article
Influence of the Shaping on Tribological Properties of PEEK-Coated U-Shaped Metal-Profiles.
- Published in:
- Advanced Engineering Materials, 2013, v. 15, n. 9, p. 830, doi. 10.1002/adem.201200274
- By:
- Publication type:
- Article
Effect of laser process parameters on the dilution, microstructure, and wear behaviour of Tribaloy™ T800 cladding on AISI 316 stainless steel.
- Published in:
- Journal of Materials Science, 2024, v. 59, n. 20, p. 9042, doi. 10.1007/s10853-024-09593-6
- By:
- Publication type:
- Article
Effect of WC–Co addition on tribological and cracking behavior of laser cladded Fe-based amorphous/crystalline composite coatings.
- Published in:
- Journal of Materials Science, 2023, v. 58, n. 28, p. 11804, doi. 10.1007/s10853-023-08744-5
- By:
- Publication type:
- Article
Tribological effects of micromilling of hardened AISI D2 steel on tool wear and top burr formation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5327, doi. 10.1007/s00170-023-11819-x
- By:
- Publication type:
- Article
Binder jetting advanced ceramics for metal-ceramic composite structures.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 531, doi. 10.1007/s00170-017-0139-y
- By:
- Publication type:
- Article
Karbon Elyaf Takviyeli PoliEterEterKeton Kompozitin Farklı Malzemelere Karşı Sürtünme ve Aşınma Performanslarının Karşılaştırılması.
- Published in:
- Bilecik Seyh Edebali University Journal of Science / Bilecik Şeyh Edebali Üniversitesi Sosyal Bilimler Dergisi, 2024, v. 11, n. 2, p. 285, doi. 10.35193/bseufbd.1293924
- By:
- Publication type:
- Article
Synthesis of Hyper-Dispersant Based on the Application of Nano-Lubricants.
- Published in:
- Journal of Dispersion Science & Technology, 2016, v. 37, n. 10, p. 1415, doi. 10.1080/01932691.2015.1111144
- By:
- Publication type:
- Article
Highlighting the Effect of Interfacial Interaction on Tribological Properties of Supramolecular Gel Lubricants.
- Published in:
- Advanced Materials Interfaces, 2016, v. 3, n. 3, p. n/a, doi. 10.1002/admi.201500489
- By:
- Publication type:
- Article
Self-Assembly of Graphene Oxide on Silicon Substrate via Covalent Interaction: Low Friction and Remarkable Wear-Resistivity.
- Published in:
- Advanced Materials Interfaces, 2016, v. 3, n. 3, p. n/a, doi. 10.1002/admi.201500410
- By:
- Publication type:
- Article
Micrographic Properties of Composite Coatings Prepared on TA2 Substrate by Hot-Dipping in Al–Si Alloy and Using Micro-Arc Oxidation Technologies (MAO).
- Published in:
- Coatings (2079-6412), 2020, v. 10, n. 4, p. 374, doi. 10.3390/coatings10040374
- By:
- Publication type:
- Article
Tribological and Wear Performance of Carbide Tools with TiB<sub>2</sub> PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy.
- Published in:
- Coatings (2079-6412), 2017, v. 7, n. 11, p. 187, doi. 10.3390/coatings7110187
- By:
- Publication type:
- Article
Preparation of high thermal stability polysulfone microcapsules containing lubricant oil and its tribological properties of epoxy composites.
- Published in:
- Journal of Microencapsulation, 2016, v. 33, n. 3, p. 286, doi. 10.3109/02652048.2016.1171917
- By:
- Publication type:
- Article
Microstructural, Mechanical, and Tribological Characteristics of Ceramic Reinforced Al/Cu Hybrid Matrix Composites.
- Published in:
- Physics of Metals & Metallography, 2024, v. 125, n. 7, p. 797, doi. 10.1134/S0031918X23602044
- By:
- Publication type:
- Article
Tribological behaviour of a self-lubricated GO/WC-12Co thermal spray coating.
- Published in:
- Surface Engineering, 2018, v. 34, n. 10, p. 762, doi. 10.1080/02670844.2017.1352202
- By:
- Publication type:
- Article
Rotational Cone Tribometer (RCT) for Approaching the Tribological Behavior of Hard and Soft Sealing Materials Under Dynamic Line Contact.
- Published in:
- Macromolecular Symposia, 2018, v. 378, n. 1, p. 1, doi. 10.1002/masy.201600120
- By:
- Publication type:
- Article
Effect of Electrolyte Composition on the Structure and Tribological Properties of Ceramic Coatings Obtained by Micro-Arc Oxidation.
- Published in:
- Refractories & Industrial Ceramics, 2024, v. 64, n. 5, p. 541, doi. 10.1007/s11148-024-00887-5
- By:
- Publication type:
- Article
Influence of the Surface Layer Morphology of SiSiC Ceramics on the Tribological Characteristics of a Hybrid Friction Couple.
- Published in:
- Refractories & Industrial Ceramics, 2022, v. 63, n. 3, p. 297, doi. 10.1007/s11148-022-00720-x
- By:
- Publication type:
- Article
Influence of Hardening Additives on the Characteristics of the Tribological TiC–Al2O3 Ceramic Composite Obtained by SHS.
- Published in:
- Refractories & Industrial Ceramics, 2021, v. 61, n. 5, p. 528, doi. 10.1007/s11148-021-00515-6
- By:
- Publication type:
- Article
Development of a Method for Evaluating Alumina Ceramic Material the Wear Resistance.
- Published in:
- Refractories & Industrial Ceramics, 2020, v. 60, n. 6, p. 614, doi. 10.1007/s11148-020-00416-0
- By:
- Publication type:
- Article
Physicochemical Processes in Wear-Resistant Corundum Ceramic Materials Science and Technology: Nozzles for Underground Soil Tunnelling Rimmers.
- Published in:
- Refractories & Industrial Ceramics, 2016, v. 57, n. 4, p. 378, doi. 10.1007/s11148-016-9988-4
- By:
- Publication type:
- Article
Study of Surfacing High-Pressure Pump Plungers.
- Published in:
- Chemical & Petroleum Engineering, 2017, v. 53, n. 1/2, p. 65, doi. 10.1007/s10556-017-0296-8
- By:
- Publication type:
- Article
Cermet Systems: Synthesis, Properties, and Applications.
- Published in:
- Ceramics (2571-6131), 2022, v. 5, n. 2, p. 210, doi. 10.3390/ceramics5020018
- By:
- Publication type:
- Article
MoS<sub>2</sub>粉末改性多烷基取代环戊烷润滑脂真空摩擦学性能研究.
- Published in:
- Lubrication Engineering (0254-0150), 2025, v. 50, n. 1, p. 122, doi. 10.3969/j.issn.0254-0150.2025.01.016
- By:
- Publication type:
- Article
聚乙二醇分子量对合成的水性聚醸酯的摩擦学性能影响.
- Published in:
- Lubrication Engineering (0254-0150), 2024, v. 49, n. 12, p. 106, doi. 10.3969/j.issn.0254-0150.2024.12.013
- By:
- Publication type:
- Article
等离子喷涂NiCrAlY-Ag@ Ni-MoS<sub>2</sub> @ Ni涂层宽温域摩擦学性能研究.
- Published in:
- Lubrication Engineering (0254-0150), 2024, v. 49, n. 12, p. 70, doi. 10.3969/j.issn.0254-0150.2024.12.009
- By:
- Publication type:
- Article
Effect of Modified Nano h-BN Lubricating Oil Additive on Tribological Properties of Cylinder Liner-Piston Ring.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 11, p. 200, doi. 10.3969/j.issn.0254-0150.2023.11.025
- By:
- Publication type:
- Article
Friction and Wear Properties of Mechanical Sealing Materials for Ship Stern Shaft.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 11, p. 130, doi. 10.3969/j.issn.0254-0150.2023.11.015
- By:
- Publication type:
- Article
Tribological Characteristics of PTFE Matrix Composites under Seawater Lubrication.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 11, p. 123, doi. 10.3969/j.issn.0254-0150.2023.11.014
- By:
- Publication type:
- Article
Research on the Vibration and Noise Reduction Performance of Modified Composite Materials under Sediment Conditions.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 11, p. 105, doi. 10.3969/j.issn.0254-0150.2023.11.012
- By:
- Publication type:
- Article
Research Progress on Modification Technology of Polymer Friction Pair Materials for Water-Related Engineering Equipment.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 11, p. 73, doi. 10.3969/j.issn.0254-0150.2023.11.009
- By:
- Publication type:
- Article