Works matching DE "AUTOMOBILE differentials"

Results: 80

State Capacity and the Role of Industrial Policy in Automobile Industry: a Comparative Analysis of Turkey and South Korea.

Published in:

Journal of Industry, Competition & Trade, 2020, v. 20, n. 2, p. 307, doi. 10.1007/s10842-019-00327-y

By:

Yülek, Murat A.;
Lee, Kwon Hyung;
Kim, Jungsuk;
Park, Donghyun

Publication type:

Article

Study on manufacturing of special-shaped ends blank for cross wedge rolling without stub bar.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 9-12, p. 2465, doi. 10.1007/s00170-020-05795-9

By:

Wang, Ying;
Wang, Rui;
Zhang, Xiaohua;
Hu, Pengke;
Chen, Yang;
Rong, Quansheng;
Shu, Xuedao

Publication type:

Article

Structural optimization methods of nonlinear static analysis with contact and its application to design lightweight gear box of automatic transmission of vehicles.

Published in:

Structural & Multidisciplinary Optimization, 2016, v. 53, n. 6, p. 1383, doi. 10.1007/s00158-015-1369-y

By:

Ide, Takanori;
Kitajima, Hiroyuki;
Otomori, Masaki;
Leiva, Juan;
Watson, Brian

Publication type:

Article

Fundamental Study on No-lubricating Friction Characteristics Due to Anisotropy of Surface Properties Applied to Differential Gear.

Published in:

Tribology in Industry, 2019, v. 41, n. 3, p. 311, doi. 10.24874/ti.2019.41.03.01

By:

Ebisuno, Y.;
Sato, Y.;
Fukumoto, M.

Publication type:

Article

DETERMINATION OF DYNAMIC AND TRACTION-ENERGY INDICATORS OF ALLWHEEL-DRIVE TRACTIONTRANSPORT MACHINE.

Published in:

Eastern-European Journal of Enterprise Technologies, 2023, v. 121, n. 7, p. 40, doi. 10.15587/1729-4061.2023.270988

By:

Antoshchenkov, Roman;
Bogdanovich, Serhii;
Halych, Ivan;
Cherevatenko, Halyna

Publication type:

Article

EFFECTS OF ROTATIONAL SPEED ON THE NATURAL FREQUENCY OF THE DIFFERENTIAL BEVEL GEAR.

Published in:

Eastern-European Journal of Enterprise Technologies, 2022, v. 118, n. 1, p. 56, doi. 10.15587/1729-4061.2022.263624

By:

Hassan, Ali Raad

Publication type:

Article

Dynamic modeling and analysis of the rotor–stator coupling system of a coaxial contra-rotating gearbox.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-49387-5

By:

Zhang, Donglin;
Cui, Ji;
Zhu, Rupeng;
Li, Miaomiao

Publication type:

Article

AUTODESK INVENTOR APPLICATION - MODELING OF A TYPE T1 DIFFERENTIAL TORSEN.

Published in:

Journal of Industrial Design & Engineering Graphics, 2017, v. 12, n. 2, p. 29

By:

TRESTIANU, Daniel;
BAROIU, Nicușor

Publication type:

Article

Design and power flow analysis for multi-speed automatic transmission with hybrid gear trains.

Published in:

International Journal of Automotive Technology, 2016, v. 17, n. 4, p. 629, doi. 10.1007/s12239-016-0062-5

By:

Yang, F.;
Feng, J.;
Du, F.

Publication type:

Article

Cornering stiffness and sideslip angle estimation based on simplified lateral dynamic models for four-in-wheel-motor-driven electric vehicles with lateral tire force information.

Published in:

International Journal of Automotive Technology, 2015, v. 16, n. 4, p. 669, doi. 10.1007/s12239-015-0068-4

By:

Lian, Y.;
Zhao, Y.;
Hu, L.;
Tian, Y.

Publication type:

Article

Systematic synthesis method and prototyping of fixed-axle vehicular electrified mechanical transmission.

Published in:

International Journal of Automotive Technology, 2015, v. 16, n. 4, p. 697, doi. 10.1007/s12239-015-0070-x

By:

Zhang, H.;
Zhong, Z.;
Chen, X.

Publication type:

Article

Influence of propeller shaft bending vibration on drivetrain gear dynamics.

Published in:

International Journal of Automotive Technology, 2015, v. 16, n. 1, p. 57, doi. 10.1007/s12239-015-0006-5

By:

Yang, J.;
Lim, T.

Publication type:

Article

Optimum Design of 1st Gear Ratio for 4WD Vehicles Based on Vehicle Dynamic Behaviour.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2013, v. 5, p. 1, doi. 10.1155/2013/474872

By:

Shojaeefard, M. H.;
Talebitooti, R.;
Satri, Sadegh Yarmohammadi

Publication type:

Article

Advanced Electric Battery Power Storage for Motors through the Use of Differential Gears and High Torque for Recirculating Power Generation.

Published in:

Clean Technologies, 2022, v. 4, n. 4, p. 987, doi. 10.3390/cleantechnol4040061

By:

Vattanapuripakorn, Wenich;
Sonsupap, Sathapon;
Khannam, Khomson;
Bamrungwong, Natthakrit;
Kaewkhiaw, Prachakon;
Sarasamkan, Jiradanai;
Bubphachot, Bopit

Publication type:

Article

Kremayer Tipi Takımla İmal Edilen Evolvent Dişli Çarkların Genelleştirilmiş Matematik Modeli.

Published in:

Journal of Polytechnic, 2024, v. 27, n. 6, p. 2093, doi. 10.2339/politeknik.1364954

By:

FETVACI, Mahmut Cüneyt;
ŞENTÜRK, Berat Gürcan

Publication type:

Article

Development of Two-Way Self-Adaptive Gripper Using Differential Gear.

Published in:

Actuators, 2023, v. 12, n. 1, p. 14, doi. 10.3390/act12010014

By:

Kang, Bongki;
Cheong, Joono

Publication type:

Article

Effect of Floating Support Parameters on the Load-Sharing Performance of EDPGS Based on Mathematical Statistical Methods.

Published in:

Machines, 2024, v. 12, n. 4, p. 247, doi. 10.3390/machines12040247

By:

Che, Xiaoyu;
Zhu, Rupeng

Publication type:

Article

Gear Differential Flank Modification Design Method for Low Noise.

Published in:

Journal of Mechanical Engineering / Strojniški Vestnik, 2024, v. 70, n. 11/12, p. 569, doi. 10.5545/sv-jme.2024.1072

By:

Yu Zhang;
Hai Zhou;
Chengyu Duan;
Zhiyong Wang;
Hong Luo

Publication type:

Article

Hafif ticari taşıtlarda maliyet azaltma amaçlı ayna mahruti malzemesi iyileştirmesi.

Published in:

Journal of the Faculty of Engineering & Architecture of Gazi University / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi,, 2017, v. 32, n. 3, p. 855, doi. 10.17341/gazimmfd.337634

By:

Baykara, Cemal

Publication type:

Article

Feature-based modeling of automobile gears and manufacturing resources for virtual manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2011, v. 55, n. 1-4, p. 405, doi. 10.1007/s00170-010-3041-4

By:

Hu, Yanjuan;
Wang, Yiqiang;
Zhao, Guoliang;
Wang, Yao;
Yuan, Xiuhua

Publication type:

Article

Research on the Technology of a Compact Double-Layer Multispectral Filter-Wheel Mechanism Driven by a Single Motor.

Published in:

Applied Sciences (2076-3417), 2024, v. 14, n. 22, p. 10686, doi. 10.3390/app142210686

By:

Ma, Lin;
Wu, Hongbo;
Tan, Shuanglong;
Zhang, Xin;
Wang, Liang;
Zhou, Nan;
Jia, Jinlong;
Mu, Shuaiwei;
Wang, Wenjie

Publication type:

Article

Analysis of the Dynamic Characteristics of Coaxial Counter-Rotating Planetary Transmission System.

Published in:

Applied Sciences (2076-3417), 2024, v. 14, n. 11, p. 4491, doi. 10.3390/app14114491

By:

Yue, Zongxiang;
Chen, Zhaobo;
Qu, Jianjun;
Li, Yang;
Dzianis, Marmysh;
Mo, Shuai;
Yu, Guangbin

Publication type:

Article

Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control.

Published in:

Applied Sciences (2076-3417), 2019, v. 9, n. 9, p. 1787, doi. 10.3390/app9091787

By:

Chen, Po-Tuan;
Shen, Da-Jyun;
Yang, Cheng-Jung;
Huang, K. David

Publication type:

Article

Numerical modeling and dynamic characteristics study of coupling vibration of multistage face gearsplanetary transmission.

Published in:

Mechanical Sciences, 2019, v. 10, n. 2, p. 475, doi. 10.5194/ms-10-475-2019

By:

Chen, Xingbin;
Hu, Qingchun;
Xu, Zhongyang;
Zhu, Chune

Publication type:

Article

Characterizations of Polymer Gears Fabricated by Differential Pressure Vacuum Casting and Fused Deposition Modeling.

Published in:

Polymers (20734360), 2021, v. 13, n. 23, p. 4126, doi. 10.3390/polym13234126

By:

Kuo, Chil-Chyuan;
Li, Ding-Yang;
Lin, Zhe-Chi;
Kang, Zhong-Fu

Publication type:

Article

Modal Properties of Contra-rotating Encased Differential Gear Train Used in Coaxial Helicopter.

Published in:

Journal of Vibration Engineering & Technologies, 2020, v. 8, n. 6, p. 799, doi. 10.1007/s42417-019-00179-0

By:

Zhang, Donglin;
Zhu, Rupeng;
Fu, Bibo;
Tan, Wuzhong

Publication type:

Article

DISCUSSION ON FAULT DIAGNOSIS OF AND SOLUTION SEEKING FOR ROLLING BEARING BASED ON DEEP LEARNING.

Published in:

Academic Journal of Manufacturing Engineering, 2018, v. 16, n. 1, p. 58

By:

Qiming NIU

Publication type:

Article

Rapid Detection of Characters on Automobile Electronic Gear Lever.

Published in:

Journal of Engineering Science & Technology Review, 2021, v. 14, n. 4, p. 84

By:

Yongli Zhang;
Yuansheng Qi;
Ximu Make;
Shilu Liu

Publication type:

Article

A Novel Flatness Detection Method for Spiral Bevel Gears in an Automobile Gearbox.

Published in:

Lasers in Engineering (Old City Publishing), 2020, v. 45, n. 1-3, p. 189

By:

FU, X. B.;
ZHANG, G. R.;
ZHANG, Y. C.;
LI, Y. B.;
JIA, L. S.;
GUAN, Y.

Publication type:

Article

Research on Geometrical Characteristics of Straight Bevel Gears with a Small Shaft Angle with a Non-Generated Gear and Generated Pinion.

Published in:

FME Transactions, 2017, v. 45, n. 4, p. 661, doi. 10.5937/fmet1704661S

By:

Syzrantsev, Vladimir;
Syzrantseva, Ksenia;
Pazyak, Andrey;
Milanovic, Marija

Publication type:

Article

The Analysis of Gear Shift Indicator Test Results.

Published in:

FME Transactions, 2017, v. 45, n. 4, p. 585, doi. 10.5937/fmet1704585B

By:

Blagojević, Ivan A.;
Stamenković, Dragan D.;
Rakićević, Branislav B.

Publication type:

Article

DIGITAL DESIGN METHOD OF VARIABLE RATIO GEAR PAIR FOR AUTOMOBILE MECHANICAL VARIABLE RATIO STEERING GEAR BASED ON ENVELOPING SIMULATION.

Published in:

Journal of the Balkan Tribological Association, 2016, v. 22, n. 1, p. 184

By:

JIAN HU;
KAIKAI DONG;
ZIRU NIU;
GANGYAN LI

Publication type:

Article

DIGITAL DESIGN METHOD OF VARIABLE RATIO GEAR FOR AUTOMOBILE RECIRCULATING BALL VARIABLE RATIO STEERING GEAR BASED ON MESHING THEORY.

Published in:

Journal of the Balkan Tribological Association, 2016, v. 22, n. 1, p. 171

By:

JIAN HU;
WEI FAN;
ZIRU NIU;
GANGYAN LI

Publication type:

Article

AUTOMOTIVE YAW RATE COORDINATED CONTROL IN ADVANCE UNDER URGENT STEERING CONDITION BASED ON ACTIVE FRONT STEERING AND DIFFERENTIAL BRAKING.

Published in:

Journal of the Balkan Tribological Association, 2016, v. 22, n. 1, p. 48

By:

JIAN HU;
LINWEI CAO;
ZHANJIN WANG;
GANGYAN LI

Publication type:

Article

共轴反转直升机传动系统构型现状.

Published in:

Journal of Nanjing University of Aeronautics & Astronautics / Nanjing Hangkong Hangtian Daxue Xuebao, 2021, v. 53, n. 2, p. 226, doi. 10.16356/j.1005⁃2615.2021.02.009

By:

倪德;
李苗苗;
胡志安;
张栋林;
张根苗;
朱如鹏

Publication type:

Article

ENERGY EFFECTIVENESS OF THE DIFFERENTIAL OF A DEVICE FOR SPEED CHANGE THROUGH THE SUN GEAR.

Published in:

Scientific Bulletin of National Mining University, 2019, n. 6, p. 66, doi. 10.29202/nvngu/2019-6/10

By:

Strilets, О. R.;
Маlashchenkо, V. O.;
Strilets, V. M.

Publication type:

Article

Transport and Maintenance Effective Retardation Control Using Neural Networks With Genetic Algorithms.

Published in:

Vehicle System Dynamics, 2004, v. 42, n. 1/2, p. 89, doi. 10.1080/00423110412331291526

By:

Lingman, Peter;
Wahde, Mattias

Publication type:

Article

A Study on a Driver Model for Longitudinal Control on Heavy Duty Vehicle.

Published in:

Vehicle System Dynamics, 2004, v. 41, p. 332

By:

Iwaki, Ryo;
Kaneko, Tetsuya;
Kageyama, Ichiro

Publication type:

Article

Proposal on Variable Gear Ratio Characteristics of Cable-type EPS with Active Torque Control in Over-steer Situation.

Published in:

Vehicle System Dynamics, 2004, v. 41, p. 192

By:

Sakai, Katsuhiro;
Yoneda, Atsuhiko;
Shimizu, Yasuo

Publication type:

Article

COMPUTATIONAL TOOL FOR SIMULATION OF THE DYNAMIC RESPONSE OF VALVE TRAIN.

Published in:

International Journal for Traffic & Transport Engineering, 2014, v. 4, n. 1, p. 90, doi. 10.7708/ijtte.2014.4(1).07

By:

Osman, Krešimir

Publication type:

Article

DESIGN OF A MEASURING INSTRUMENT FOR A COMPONENT USED TO SYNCHRONIZE THE SPEED BETWEEN TRANSMISSIONS.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2019, v. 12, n. 3, p. 99

By:

POBIJAK, Jozef;
CZÁN, Andrej;
ŠAJGALÍK, Michal;
PAVLUSÍK, Tomáš

Publication type:

Article

DESIGN DEVELOPMENT, PROTOTYPE MANUFACTURING USING FDM TECHNIQUES AND ACCURACY ANALYSIS OF AERONAUTICAL DUAL-POWER PATH GEAR UNIT.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2013, v. 6, n. 2, p. 75

By:

BUDZIK, Grzegorz;
BERNACZEK, Jacek;
KOZIK, Bogdan;
SOBOLAK, Mariusz;
DZIUBEK, Tomasz;
SOBOLEWSKI, Bartłomiej;
GRZELKA, Mirosław

Publication type:

Article

On Differential Mechanisms for Underactuated, Lightweight, Adaptive Prosthetic Hands.

Published in:

Frontiers in Neurorobotics, 2021, v. 15, p. 1, doi. 10.3389/fnbot.2021.702031

By:

Gao, Geng;
Shahmohammadi, Mojtaba;
Gerez, Lucas;
Kontoudis, George;
Liarokapis, Minas

Publication type:

Article

改进 FSSD 的差速器壳体表面缺陷实时检测算法.

Published in:

Journal of Computer Engineering & Applications, 2022, v. 58, n. 22, p. 262, doi. 10.3778/j.issn.1002-8331.2201-0218

By:

王国东;
唐金亮;
陈特欢;
崔杰

Publication type:

Article

Optimization design and experiment of the variable differential gear train planting mechanism.

Published in:

International Journal of Agricultural & Biological Engineering, 2024, v. 17, n. 2, p. 85, doi. 10.25165/j.ijabe.20241702.8238

By:

Xiong Zhao;
Ziwei Liu;
Yuanwu Jia;
Xingxiao Ma;
Pengfei Zhang;
Jianneng Chen

Publication type:

Article

Engagement.

Published in:

Distance Learning, 2023, v. 20, n. 4, p. 45

By:

Simonson, Michael

Publication type:

Article

Effect of La Content on Inclusion Morphology in Automobile Sulfur‐Containing Gear Steel SCr420H.

Published in:

Steel Research International, 2023, v. 94, n. 10, p. 1, doi. 10.1002/srin.202300127

By:

Sun, Meng;
Jiang, Zhouhua;
Li, Yang;
Chen, Changyong;
Mao, Yunqie;
Ma, Shuai;
Wang, Yucheng;
Liu, Hang

Publication type:

Article

Effect of the Timing Addition of Ferrosilicon with Al and Ca Impurities on Inclusion Formation in Al‐Killed Automobile Gear Steel SCr420H.

Published in:

Steel Research International, 2023, v. 94, n. 1, p. 1, doi. 10.1002/srin.202200379

By:

Sun, Meng;
Jiang, Zhouhua;
Li, Yang;
Li, Huabing;
Chen, Changyong;
Ma, Shuai;
Ji, Yongshuai;
Wang, Ju;
Ma, Yanshuo

Publication type:

Article

Jakob Leupold's Imaginary Automatic Anamorphic Devices of 1713.

Published in:

Media History, 2019, v. 25, n. 2, p. 127, doi. 10.1080/13688804.2016.1266240

By:

Gilbert, Bennett

Publication type:

Article

Lubrication Reliability and Oil Churning Loss of Differential Gear Trains in a Mechanical-Hydraulic Coupling Mechanism.

Published in:

Maintenance & Reliability / Eksploatacja i Niezawodność, 2024, v. 26, n. 2, p. 1, doi. 10.17531/ein/182434

By:

Lirong Wan;
Hao Niu;
Zhiyuan Sun;
Jinying Jiang;
Wei Qin;
Hanzheng Dai

Publication type:

Article