Works matching DE "MACHINING"

Results: 5000

Investigation of thermally assisted end milling of 254 SMO super austenitic stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 5, p. 1789, doi. 10.1007/s00170-025-15667-9

By:

Passari, Émerson S.;
Souza, André J.;
Aita, Carlos A. G.;
Schirmer, Guilherme V.;
Barros, Liu Y.

Publication type:

Article

Machining gray cast iron with internally cooled tools: performance, wear, and sustainability assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 5, p. 2605, doi. 10.1007/s00170-025-15610-y

By:

Peixoto, Augusto César Santos;
Fernandes, Gustavo Henrique Nazareno;
Martins, Paulo Sérgio;
Barbosa, Lucas Melo Queiroz;
França, Pedro Henrique Pires;
da Silva, Márcio Bacci;
Costa, Éder Silva;
Baldin, Vitor;
da Silva Jr., Washington Martins;
Machado, Álisson Rocha

Publication type:

Article

AI-driven cognition for advanced injection molding and industrial implementation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 5, p. 2043, doi. 10.1007/s00170-025-15611-x

By:

Arslan, Ecesu;
Konuşkan, Yiğit;
Lazoglu, Ismail

Publication type:

Article

Hybrid µECDM techniques for machining titanium alloys: a comparative analysis of ultrasonic-assisted and powder-mixed processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 5, p. 2173, doi. 10.1007/s00170-025-15538-3

By:

Kumar, Nitesh;
Bishwakarma, Harish;
Mandal, Niladri;
Das, Alok Kumar

Publication type:

Article

How to accelerate the inorganic materials synthesis: from computational guidelines to data-driven method?

Published in:

National Science Review, 2025, v. 12, n. 4, p. 1, doi. 10.1093/nsr/nwaf081

By:

Wu, Yilei;
Li, Xiaoyan;
Guo, Rong;
Xu, Ruiqi;
Ju, Ming-Gang;
Wang, Jinlan

Publication type:

Article

型腔恒负载加工的组合轨迹设计与进给速度优化.

Published in:

Journal of South China University of Technology (Natural Science Edition), 2025, v. 53, n. 5, p. 1, doi. 10.12141/j.issn.1000-565X.240467

By:

王清辉;
王金强;
丁雪松;
廖昭洋

Publication type:

Article

Material Deformation and Damage Mechanism Based on In-Situ Plasma-Assisted Nanoscratch Test of Single Crystal Silicon.

Published in:

Chinese Journal of Mechanical Engineering, 2025, v. 38, n. 1, p. 1, doi. 10.1186/s10033-025-01238-2

By:

Wang, Ziheng;
Duan, Zhenjing;
Wang, Shuaishuai;
Li, Yuheng;
Liu, Jiyu;
Song, Jinlong;
Liu, Xin

Publication type:

Article

ANALYSIS OF THERMAL PROCESSES IN A CONTROLLED ASYNCHRONOUS MOTOR.

Published in:

Reliability: Theory & Applications, 2025, v. 20, p. 957

By:

Shikhaliyeva, S. Y.

Publication type:

Article

Geometric error modeling and source error identification methodology for a serial–parallel hybrid kinematic machining unit with five axis.

Published in:

Robotica, 2025, v. 43, n. 2, p. 561, doi. 10.1017/S0263574724002054

By:

Shen, Yifeng;
Tang, Tengfei;
Ye, Wei;
Zhang, Jun

Publication type:

Article

Robust image-based cross-sectional grain boundary detection and characterization using machine learning.

Published in:

Journal of Intelligent Manufacturing, 2025, v. 36, n. 5, p. 3067, doi. 10.1007/s10845-024-02383-6

By:

Satterlee, Nicholas;
Jiang, Runjian;
Olevsky, Eugene;
Torresani, Elisa;
Zuo, Xiaowei;
Kang, John S.

Publication type:

Article

Comparative Analysis of ANFIS-PSO and ANFIS-GA Predictions for MRR in AL-8112 Alloy Machining.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 2, p. 381, doi. 10.18280/rcma.350220

By:

Okokpujie, Imhade P.;
Ma'arof, Muhammad I. N.;
Akinwumi, Aderonke O.;
Elewa, Remilekun R.;
Monye, Stella I.;
Okokpujie, Kennedy

Publication type:

Article

Determination of vibration characteristic in automatic tapping operations based on artificial neural networks.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-01395-3

By:

Esim, Emir;
Demirel, Muhammed

Publication type:

Article

TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing.

Published in:

International Journal of Vehicle Structures & Systems (IJVSS), 2025, v. 17, n. 1, p. 104, doi. 10.4273/ijvss.17.1.16

By:

Kalyanakumar, S.;
Natarajan, S.;
Prabhahar, M.;
Saravanakumar, M.;
Sudhakaran, P.;
Suresh, N.

Publication type:

Article

Influence of Welding Parameters on Weld Quality and Spindle Load During Friction Stir Welding.

Published in:

Technical Gazette / Tehnički Vjesnik, 2025, v. 32, n. 3, p. 1107, doi. 10.17559/TV-20241116002134

By:

BÁRTA, Jozef;
BÁRTOVÁ, Katarína;
MARÔNEK, Milan;
JURINA, František;
KUKUČA, Roman

Publication type:

Article

Impact of burnishing techniques on corrosion resistance in pipeline materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1591, doi. 10.1007/s00170-025-15605-9

By:

Selma, Belabend;
Hamid, Hamadache;
Ouahiba, Taamallah;
Nacer, Mokas

Publication type:

Article

Effects of cutting conditions in turning of annealed and treated Ti6Al4V titanium alloy: modelling and optimization using GA and MOAVOA methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1379, doi. 10.1007/s00170-025-15597-6

By:

Sassi, Hacene;
Fnides, Brahim;
Elbah, Mohamed;
Cheikh, Mohamed;
Yallese, Mohamed Athmane;
Bacha, Mohamed

Publication type:

Article

Precision surface topography prediction in ball-end milling: a CWER-based approach for enhanced accuracy and efficiency.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1621, doi. 10.1007/s00170-025-15579-8

By:

Maaloul, Makram;
Belguith, Rami;
Regaieg, Amine;
Sai, Lotfi;
Amrouche, Abdelwaheb

Publication type:

Article

Interaction of Machining Parameters on MRR of Sintered NdFeB Processed by EDM-Milling.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 9, p. 4897, doi. 10.3390/app15094897

By:

Zhang, Xinyu;
Bai, Xue;
Yang, Tingyi;
Li, Li

Publication type:

Article

Low-Temperature Sealing Material Database and Optimization Prediction Based on AI and Machine Learning.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1233, doi. 10.3390/polym17091233

By:

Jia, Honghao;
Tai, Zhongxu;
Lyu, Rui;
Ishikawa, Kousuke;
Sun, Yixiao;
Cao, Jianting;
Ju, Dongying

Publication type:

Article

Research on the Layout Design of Auxiliary Support Modules for Suppressing Machining Chatter in Thin-Walled Beams.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1986, doi. 10.3390/ma18091986

By:

Feng, Junping;
Gu, Yifei;
Mu, Zhuang;
Wang, Jiawei;
Du, Zongyang;
He, Wenbo;
Aw, Kean;
Yang, Yinfei

Publication type:

Article

Effect of System Dynamics on Surface Topography in Fast Tool Servo-Based Diamond Turning of Microlens Arrays.

Published in:

Nanomanufacturing & Metrology, 2025, v. 8, n. 1, p. 1, doi. 10.1007/s41871-025-00253-0

By:

Hashimoto, Takeshi;
Yan, Jiwang

Publication type:

Article

Determination of vibration characteristic in automatic tapping operations based on artificial neural networks.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-01395-3

By:

Esim, Emir;
Demirel, Muhammed

Publication type:

Article

Development of a novel CNC energy consumption model and energy analyzer software: towards energy-efficient tool pathway strategies in CNC machining.

Published in:

Discover Mechanical Engineering, 2025, v. 4, n. 1, p. 1, doi. 10.1007/s44245-025-00101-x

By:

Kablay, Thabang;
Namoshe, Molaletsa

Publication type:

Article

Effect of Different Sandblasting Parameters on the Properties of Additively Manufactured and Machined Titanium Surfaces.

Published in:

In Vivo, 2025, v. 39, n. 3, p. 1767, doi. 10.21873/invivo.13979

By:

AKBAS, OSMAN;
RECK, LEIF;
JAHN, ANNE;
HERMSDORF, JÖRG;
STIESCH, MEIKE;
GREULING, ANDREAS

Publication type:

Article

Comparative Analysis of Surface Roughness and Tool Wear under Dry, MQL, and Cryogenic Machining Conditions in Invar 36 Turning Operations.

Published in:

Journal of Mines, Metals & Fuels, 2025, v. 73, n. 4, p. 1097, doi. 10.18311/jmmf/2025/47546

By:

Shetty, Sushmith M.;
Marakini, Vikas;
D'Mello, Grynal;
Pai, Srinivasa P.;
Ashray;
Dsouza, Elrick Winston;
Dsouza, Lloyd Alston;
Mendonca, Vivan

Publication type:

Article

A REVIEW OF INSIGHTS AND RESEARCH PROGRESS ON HARD TURNING.

Published in:

Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment & Technology, 2024, v. 35, p. 119, doi. 10.35219/awet.2024.11

By:

Girisankar, S.;
Murugan, S. Senthil;
Shankar, E.

Publication type:

Article

Human/Machine: The Future of Our Partnership with Machines.

Published in:

2019

By:

Riccomini, Donald R.

Publication type:

Book Review

Fracture behaviour of nc-TiAlN/a-Si<sub>3</sub>N<sub>4</sub> nanocomposite coatings under cyclic nano impact testing.

Published in:

Surface Engineering, 2020, v. 36, n. 7, p. 671, doi. 10.1080/02670844.2019.1688011

By:

Suresh Babu, P.;
Venkatesh, L.;
Srinivasa Rao, D.;
Ravi, N.

Publication type:

Article

On concept of process signature in analysis of multistage surface formation.

Published in:

Surface Engineering, 2010, v. 26, n. 3, p. 216, doi. 10.1179/174329409X455412

By:

Mansori, M. El;
Mezghani, S.;
Sabri, L.;
Zahouani, H.

Publication type:

Article

Characteristics of laser melted AISI-T1 high speed steel and its wear resistance.

Published in:

Surface Engineering, 2007, v. 23, n. 2, p. 112, doi. 10.1179/174329407X169502

By:

Darmawan, W.;
Quesada, J.;
Marchal, R.

Publication type:

Article

TiN–AlN nanomultilayer films for microdrilling and machining.

Published in:

Surface Engineering, 2005, v. 21, n. 4, p. 307, doi. 10.1179/174329405X55285

By:

Yao, S. H.;
Su, Y. L.;
Kao, W. H.;
Cheng, K. W.

Publication type:

Article

Analysis: Auto king of the road.

Published in:

Computing & Control Engineering, 2006, v. 17, n. 5, p. 10, doi. 10.1049/cce:20060510

By:

Sparkes, M.

Publication type:

Article

Letters to the Editor.

Published in:

2006

By:

Bates, Mark;
Morgan, Jon;
Atherton, Polly

Publication type:

Letter

On with the show [machine automation tools].

Published in:

Computing & Control Engineering, 2006, v. 17, n. 1, p. 44, doi. 10.1049/cce:20060109

By:

Babb, M.

Publication type:

Article

Bond strength of end-grain joints and its dependence on surface roughness and adhesive spread.

Published in:

Journal of Wood Science, 2010, v. 56, n. 5, p. 429, doi. 10.1007/s10086-010-1118-1

By:

Follrich, Jürgen;
Vay, Oliver;
Veigel, Stefan;
Müller, Ulrich

Publication type:

Article

Additive Manufacturing of Components for a Ball Machine Prototype.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100437

By:

Tunsoiu, Nicolae;
Doicin, Cristian‐Vasile;
Murzac, Ion;
Oncescu, Teofil‐Alin;
Tunsoiu, Daniela;
Murzac, Roman;
Ulmeanu, Mihaela‐Elena

Publication type:

Article

Developing Safe Lathing Parameters for PBX 9501.

Published in:

Propellants, Explosives, Pyrotechnics, 2018, v. 43, n. 8, p. 779, doi. 10.1002/prep.201700285

By:

Woodrum, Randall B.;
Barnett, David H.;
Dickens, James C.;
Neuber, Andreas A.

Publication type:

Article

Thickness measurement of deterioration layer of monocrystalline silicon by specific crystallographic plane cutting of wire electrical discharge machining.

Published in:

Journal of Materials Science: Materials in Electronics, 2016, v. 27, n. 9, p. 9107, doi. 10.1007/s10854-016-4945-z

By:

Ge, Mengxing;
Liu, Zhidong;
Shen, Lida;
Ding, Hao;
Chen, Haoran;
Tian, Zongjun

Publication type:

Article

Fixed-structure robust controller design for chatter mitigation in high-speed milling.

Published in:

International Journal of Robust & Nonlinear Control, 2015, v. 25, n. 17, p. 3495, doi. 10.1002/rnc.3280

By:

Dijk, N. J. M.;
Wouw, N.;
Nijmeijer, H.

Publication type:

Article

Influence of process parameters on localized corrosion of AA7075 alloy during the production of aeronautic components.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2015, v. 66, n. 12, p. 1498, doi. 10.1002/maco.201508402

By:

Lourenço, J. C.;
Faria, M. I. S. T.;
Robin, A.;
Prisco, L. P.;
Puccini, M.C.

Publication type:

Article

Surface integrity optimization in milling of aluminum 1100: effects of supercritical CO₂ + MQL and emulsion cooling with various milling strategies.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 6139, doi. 10.1007/s00170-025-15540-9

By:

Siahsarani, Armin;
Bayat, Masuod;
Alinaghizadeh, Amir;
Azarhoushang, Bahman;
Bösinger, Robert;
Amini, Saied

Publication type:

Article

Experimental study on machining performance and tool wear of TC11 titanium alloy mortise and tenon milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5809, doi. 10.1007/s00170-025-15514-x

By:

Lei, Xiaofei;
Chen, Jian;
Wang, Rong;
Wu, Haitao;
Zhao, Biao;
Ding, Wenfeng;
Liu, Ziang;
Liu, Xu

Publication type:

Article

An optimized diamond micro chiseling method to eliminate machining defects of cube corner microstructure.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5461, doi. 10.1007/s00170-025-15505-y

By:

Wu, Bing;
Liu, Hanzhong;
Geng, Yanquan;
Wang, Shuo;
Cao, Yongzhi;
Zong, Wenjun

Publication type:

Article

Development and performance evaluation of real-time geometric error compensation through position feedback modification in 5-axis machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5565, doi. 10.1007/s00170-025-15476-0

By:

Guevel, Flore;
Viprey, Fabien;
Euzenat, Charly;
Fromentin, Guillaume;
Masciantonio, Ugo

Publication type:

Article

Study on the machining accuracy of soft elastic material using cryogenic dicing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4777, doi. 10.1007/s00170-025-15431-z

By:

Yu, Bin-hai;
He, Chong-hui;
Li, Jia-sheng;
Zhang, Yun-long;
Ding, Xin-rui;
Li, Zong-tao

Publication type:

Article

Advances in the processing of ceramic matrix composites: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4243, doi. 10.1007/s00170-025-15430-0

By:

Zhang, Changjuan;
Wang, Xinzhuang;
Jiao, Feng;
Wang, Junhao;
Qiu, Yuxiao

Publication type:

Article

A comprehensive review of micro-milling: fundamental mechanics, challenges, and future prospective.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4309, doi. 10.1007/s00170-025-15388-z

By:

Ullah, Najeeb;
Rehan, Muhammad;
Farooq, Muhammad Umar;
Li, Huaizhong;
Yip, Wai Sze;
To, Sandy Suet

Publication type:

Article

Clarification of material removal mechanism in fast ED-milling - part II: numerical simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3657, doi. 10.1007/s00170-025-15345-w

By:

Wang, Jian;
Ma, Jie-Yu;
Lu, Yi-Fan;
Zhang, Ya-Ou;
Zhao, Wan-Sheng

Publication type:

Article

Clarification of material removal mechanism in fast ED milling: part I—experimental investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3627, doi. 10.1007/s00170-025-15343-y

By:

Wang, Jian;
Chu, Hao-Yu;
Zhang, Ya-Ou;
Zhao, Wan-Sheng

Publication type:

Article

Overview on material removal mechanisms and surface textures modelling in abrasive jet machining processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3165, doi. 10.1007/s00170-025-15300-9

By:

Zhang, Shibo;
Zhang, Zhenzhong;
Lu, Laixiao;
Wang, Zhen;
Yao, Peng

Publication type:

Article