Works matching DE "GLULAM (Wood)"

Results: 179

Effect of concentrated Butt-Joints on flexural properties of laminated Bamboo-Timber flitch beams.

Published in:

Journal of Sandwich Structures & Materials, 2022, v. 24, n. 2, p. 1226, doi. 10.1177/10996362211040103

By:

Zhang, Hexin;
Gharavi, Niaz;
Wong, Simon HF;
Deng, Yu;
Bahadori-Jahromi, Ali;
Limkatanyu, Suchart;
Qiao, Yao;
Kuang, JS

Publication type:

Article

Potential of Reinforced Indonesian Glulam Beams Using Grade I (Bengkirai), Grade II (Kamper), Grade III (Nyatoh) Woods for Use in Structural Wood Design.

Published in:

Journal of Engineering & Technological Sciences, 2016, v. 48, n. 2, p. 1, doi. 10.5614/j.eng.technol.sci.2016.48.2.2

By:

Sugiri, Saptahari;
Alamsyah, Eka Mulya;
Usman, Arie Putra

Publication type:

Article

Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement.

Published in:

Journal of Engineering & Technological Sciences, 2015, v. 47, n. 6, p. 601, doi. 10.5614/j.eng.technol.sci.2015.47.6.1

By:

Usman, Arie Putra;
Sugiri, Saptahari

Publication type:

Article

Introduction to special issue—advances in mass timber structures.

Published in:

Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. I, doi. 10.1139/cjce-2024-0155

By:

Woods, Joshua;
Doudak, Ghasan;
Iqbal, Asif

Publication type:

Article

Experimental, finite element and analytical characterization of hysteretic response of ductile connections with nailed angle brackets for mass timber structures.

Published in:

Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. 803, doi. 10.1139/cjce-2023-0394

By:

Sejkot, P.;
Aloisio, A.;
Obradović, V.;
Iqbal, A.

Publication type:

Article

Behaviour of glued-laminated timber beams under impact loading.

Published in:

Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. 753, doi. 10.1139/cjce-2023-0298

By:

Wight, Nicole;
Viau, Christian;
Heffernan, Patrick

Publication type:

Article

Elastic response of cross-laminated timber panels using finite element and analytical techniques.

Published in:

Canadian Journal of Civil Engineering, 2021, v. 48, n. 10, p. 1245, doi. 10.1139/cjce-2020-0205

By:

Albostami, Asad S.;
Wu, Zhangjian;
Cunningham, Lee S.

Publication type:

Article

Critical reaction forces of glulam members with tension-side notches at end supports<sup>1</sup>.

Published in:

Canadian Journal of Civil Engineering, 2015, v. 42, n. 10, p. 779, doi. 10.1139/cjce-2014-0466

By:

Weckendorf, Jan;
Meleki Kiwelu, Henry;
Smith, Ian

Publication type:

Article

Explanation of tension-side notch design provisions for glulam in CSA Standard 086-14<sup>1</sup>.

Published in:

Canadian Journal of Civil Engineering, 2015, v. 42, n. 10, p. 787, doi. 10.1139/cjce-2015-0088

By:

Smith, Ian;
Meleki Kiwelu, Henry;
Weckendorf, Jan

Publication type:

Article

A NOVEL METHOD FOR PRODUCING A GLULAM FROM THE WOOD OF PEELER CORES.

Published in:

Maderas: Ciencia y Tecnología, 2022, v. 24, n. 1, p. 1, doi. 10.4067/s0718-221x2022000100404

By:

Koynov, Daniel;
Grigorov, Rosen;
Valyova, Miglena

Publication type:

Article

Effects of the presence or absence and the position of glued edge joints in the lamina on the shear strength of glued laminated timber.

Published in:

Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02062-1

By:

Ido, Hirofumi;
Miyatake, Atsushi;
Hiramatsu, Yasushi;
Miyamoto, Kohta

Publication type:

Article

Study on the strength of glued laminated timber beams with round holes: proposal of the design formula for the splitting strength.

Published in:

Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02013-w

By:

Okamoto, Shigefumi;
Akiyama, Nobuhiko;
Araki, Yasuhiro;
Aoki, Kenji;
Inayama, Masahiro

Publication type:

Article

Transformed-section method applied to multispecies glulam timber beams subjected to pure bending.

Published in:

Mechanics of Advanced Materials & Structures, 2022, v. 29, n. 27, p. 6814, doi. 10.1080/15376494.2021.1985665

By:

Timbolmas, Cristian;
Bravo, Rafael;
Rescalvo, Francisco J.;
Portela, María

Publication type:

Article

Verification of the photogrammetric approach on the torsion test method for timber beams.

Published in:

International Wood Products Journal, 2022, v. 13, n. 1, p. 3, doi. 10.1080/20426445.2021.1983690

By:

Mohamed, Ahmed;
Uheida, Kal;
Quan, Yanfang;
Zhang, Hexin

Publication type:

Article

In this issue.

Published in:

2021

By:

Sawyer, Gervais

Publication type:

Editorial

Bending test on large-scale GLT beams with well-known beam setup using machine grading indicator.

Published in:

International Wood Products Journal, 2021, v. 12, n. 4, p. 258, doi. 10.1080/20426445.2021.1969166

By:

Fink, Gerhard;
Stadelmann, Phillipp;
Frangi, Andrea

Publication type:

Article

Applicability of the torsion test and photogrammetric approach on structural timber beams.

Published in:

International Wood Products Journal, 2021, v. 12, n. 3, p. 206, doi. 10.1080/20426445.2021.1952047

By:

Mohamed, Ahmed;
Uheida, Kal;
Quan, Yanfang;
Zhang, Hexin

Publication type:

Article

Perpendicular to grain stress concentrations in glulam beams of irregular shape - finite element modelling in the context of standard design.

Published in:

International Wood Products Journal, 2018, v. 9, n. 4, p. 157, doi. 10.1080/20426445.2018.1540377

By:

Al Sabouni-Zawadzka, Anna;
Gilewski, Wojciech;
Pełczyński, Jan

Publication type:

Article

The environmental impact of wood compared to other building materials.

Published in:

International Wood Products Journal, 2016, v. 7, n. 4, p. 215, doi. 10.1080/20426445.2016.1190166

By:

Hill, C. A. S.;
Dibdiakova, J.

Publication type:

Article

PERFORMANCE OF GLUED LAMINATED TIMBER (GLULAM) MADE FROM KELEMPAYAN WOOD WITH DIFFERENT LAMINA ASSEMBLY PATTERNS AND ADHESIVE SPREAD RATES.

Published in:

Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineering, 2023, v. 16, n. 1, p. 51, doi. 10.31926/but.fwiafe.2023.16.65.1.4

By:

HERMAWAN, Andi;
MOHAMAD AMINI, Mohd Hazim;
ABU BAKAR, Mohamad Bashree;
MOHD ZAINAL, Muhammad Zamidi

Publication type:

Article

Polystyrene-Impregnated Glulam Resistance to Subterranean Termite Attacks in a Laboratory Test.

Published in:

Polymers (20734360), 2022, v. 14, n. 19, p. 4003, doi. 10.3390/polym14194003

By:

Hadi, Yusuf Sudo;
Hermawan, Dede;
Abdillah, Imam Busyra;
Mubarok, Mahdi;
Arsyad, Wa Ode Muliastuty;
Pari, Rohmah

Publication type:

Article

Compressive Strength Properties Perpendicular to the Grain of Hollow Glue-Laminated Timber Elements.

Published in:

Polymers (20734360), 2022, v. 14, n. 16, p. 3403, doi. 10.3390/polym14163403

By:

Perković, Nikola;
Barbalić, Jure;
Rajčić, Vlatka;
Duvnjak, Ivan

Publication type:

Article

Mechanical and Fire Performance of Innovative Hollow Glue-Laminated Timber Beams.

Published in:

Polymers (20734360), 2022, v. 14, n. 16, p. 3381, doi. 10.3390/polym14163381

By:

Perković, Nikola;
Rajčić, Vlatka

Publication type:

Article

Numerical study of racking resistance of timber-made double-skin façade elements.

Published in:

Advances in Production Engineering & Management, 2022, v. 17, n. 2, p. 231, doi. 10.14743/apem2022.2.433

By:

Šilih, E. Kozem;
Premrov, M.

Publication type:

Article

Analytical Method with Iteration Technique (AMIT) and Finite Element Method (FEM) for Predicting the Flexural Performance of Glulam Wood/PVC Composite Hollow Member.

Published in:

BioResources, 2024, v. 19, n. 3, p. 5197, doi. 10.15376/biores.19.3.5197-5226

By:

Phatthana Aunyingcharoen;
Vichai Tawich Pulngern;
Rosarpitak;
Narongrit Sombatsompop

Publication type:

Article

Simulation Calculation and Analysis of Building Energy Consumption of Multi-Story Glued Laminated Timber Structures.

Published in:

BioResources, 2023, v. 18, n. 4, p. 7391, doi. 10.15376/biores.18.4.7391-7410

By:

Yuying Zou;
Xiaoyu Gu;
Adjei, Patrick;
Zheng Wang;
Yujie Huang

Publication type:

Article

Shear Stiffness of Notched Connectors in Glue Laminated Timber-Concrete Composite Beams Under Fire Conditions.

Published in:

BioResources, 2022, v. 17, n. 4, p. 6397, doi. 10.15376/biores.17.4.6397-6410

By:

Danrong Shi;
Xiamin Hu;
Jing Zhang;
Hao Du

Publication type:

Article

Determination of Charring Thickness of Wood by Residual Strength Analysis.

Published in:

BioResources, 2022, v. 17, n. 1, p. 1485, doi. 10.15376/biores.17.1.1485-1493

By:

Min Ji Kim;
Sejong Kim;
Chul-ki Kim;
Kug Bo Shim

Publication type:

Article

Influence of Adhesive and Layer Composition on Compressive Strength of Mixed Cross-laminated Timber.

Published in:

BioResources, 2021, v. 16, n. 4, p. 7461, doi. 10.15376/biores.16.4.7461-7473

By:

In-Hwan Lee;
Keon-Ho Kim

Publication type:

Article

Examination of Wood Adhesive Bonds via MicroCT: The Influence of Pre-Gluing Surface Machining Treatments for Southern Pine, Spotted Gum, and Darwin Stringybark Timbers.

Published in:

BioResources, 2021, v. 16, n. 3, p. 5058

By:

Leggate, William;
Shirmohammadi, Maryam;
McGavin, Robert L.;
Outhwaite, Andrew;
Knackstedt, Mark;
Brookhouse, Matthew

Publication type:

Article

Experimental Investigation into the Flexural Behavior of Hollow, Full, and Intermittently Stiffened (bamboo-like) Glulam Beams from Larch Wood.

Published in:

BioResources, 2019, v. 14, n. 1, p. 2171, doi. 10.15376/biores.14.1.2171-2185

By:

Xiaofeng Zhang;
Lisheng Luo;
Haiyan Fu;
Youfu Sun;
Xiran Hui

Publication type:

Article

Experimental and Numerical Study of Moisture-induced Stress Formation in Hexagonal Glulam Using X-ray Computed Tomography and Finite-element Analysis.

Published in:

BioResources, 2018, v. 13, n. 4, p. 7395, doi. 10.15376/biores.13.4.7395-7403

By:

Rongrong Li;
Pingxiang Cao;
Wei Xu;
Ekevad, Mats;
Xiaodong (Alice) Wang

Publication type:

Article

Evaluation of the Bending Properties of Modified Fastgrowing Poplar Glulam Based on Composite Mechanics.

Published in:

BioResources, 2018, v. 13, n. 3, p. 7071, doi. 10.15376/biores.13.3.7071-7085

By:

Zhenhua Han;
Ray Zhang;
Boqi Song

Publication type:

Article

Shear Capacity of Stud-Groove Connector in Glulam-concrete Composite Structure.

Published in:

BioResources, 2017, v. 12, n. 3, p. 4690, doi. 10.15376/biores.12.3.4690-4706

By:

Lan Xie;
Guojing He;
Wang, Xiaodong (Alice);
Gustafsson, Per Johan;
Crocetti, Roberto;
Liping Chen;
Li Li;
Wenhui Xie

Publication type:

Article

Assessing the Environmental Impacts of Glued- Laminated Bamboo Based on a Life Cycle Assessment.

Published in:

BioResources, 2016, v. 11, n. 1, p. 1941, doi. 10.15376/biores.11.1.1941-1950

By:

Jiqing Li;
Yuan Yuan;
Xin Guan

Publication type:

Article

Synthesis and Characterization of Starch-based Aqueous Polymer Isocyanate Wood Adhesive.

Published in:

BioResources, 2015, v. 10, n. 4, p. 7653, doi. 10.15376/biores.10.4.7653-7666

By:

Shu-min Wang;
Jun-you Shi;
Wenbiao Xu

Publication type:

Article

Determination of Optimal Machining Parameters of Massive Wooden Edge-Glued Panels Made of European larch (Larix decidua Mill.) using Taguchi Design Method.

Published in:

BioResources, 2015, v. 10, n. 4, p. 7772, doi. 10.15376/biores.10.4.7772-7781

By:

Sofuoglu, Sait Dundar

Publication type:

Article

Glulam Properties of Fast-growing Species Using Mahogany Tannin Adhesive.

Published in:

BioResources, 2015, v. 10, n. 4, p. 7419, doi. 10.15376/biores.10.4.7419-7433

By:

Diza Lestari, Andi Sri Rahayu;
Hadi, Yusuf Sudo;
Hermawan, Dede;
Santoso, Adi

Publication type:

Article

The effect of depth and diameter of glued-in rods on pull-out connection strength of bamboo glulam.

Published in:

Journal of Wood Science, 2016, v. 62, n. 1, p. 109, doi. 10.1007/s10086-015-1516-5

By:

Yan, Yan;
Liu, Huanrong;
Zhang, Xiubiao;
Wu, Heng;
Huang, Yun

Publication type:

Article

Recent research and development on sugi (Japanese cedar) structural glued laminated timber.

Published in:

Journal of Wood Science, 2015, v. 61, n. 4, p. 337, doi. 10.1007/s10086-015-1475-x

By:

Hayashi, Tomoyuki;
Miyatake, Atsushi

Publication type:

Article

Investigation of the structural performance of glulam beam connections using self-tapping screws.

Published in:

Journal of Wood Science, 2014, v. 60, n. 1, p. 39, doi. 10.1007/s10086-013-1376-9

By:

Yeh, Min-Chyuan;
Lin, Yu-Li;
Huang, Gien-Ping

Publication type:

Article

Experimental and numerical investigation of timber formwork beam under different loading type.

Published in:

Mechanics Based Design of Structures & Machines, 2022, v. 50, n. 3, p. 1090, doi. 10.1080/15397734.2020.1749071

By:

Dönmez, T. Ünal;
Türer, Abdullah;
Anil, Özgür;
Erdem, R. Tuğrul

Publication type:

Article

增强木梁受弯性能数值计算.

Published in:

China Forest Products Industry, 2023, v. 60, n. 5, p. 51, doi. 10.19531/j.issn1001-5299.202305009

By:

王可培;
凌志彬;
宋千军

Publication type:

Article

Investigation of the Effect of the Force Arm on the Bending Capability of Prestressed Glulam Beam.

Published in:

Structural Durability & Health Monitoring (SDHM), 2024, v. 18, n. 5, p. 641, doi. 10.32604/sdhm.2024.049601

By:

Zhao, Yan;
Wu, Yuanyuan;
He, Shengliang;
Gao, Zhenglu;
Huang, Ziyan;
Lv, Chenzheng

Publication type:

Article

Charring Properties of Korean Larch Structural Glue-Laminated Timber Beams Based on Cross-Sectional Area Ratios.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 3, p. 305, doi. 10.3390/buildings15030305

By:

Choi, Yunjeong;
Baik, Kwonhyuk;
An, Jaehong;
Kim, Byoungil

Publication type:

Article

Multi-Criteria Assessment of Timber-Based Structural Systems for a Grocery Store.

Published in:

Buildings (2075-5309), 2024, v. 14, n. 5, p. 1335, doi. 10.3390/buildings14051335

By:

Gecys, Tomas;
Tupenaite, Laura;
Kanapeckiene, Loreta;
Naimaviciene, Jurga

Publication type:

Article

Design Analysis of Mass Timber and Volumetric Modular Strategies as Counterproposals for an Existing Reinforced Concrete Hotel.

Published in:

Buildings (2075-5309), 2024, v. 14, n. 4, p. 1151, doi. 10.3390/buildings14041151

By:

Filion, Marie-Laure;
Ménard, Sylvain;
Carbone, Carlo;
Bader Eddin, Mohamad

Publication type:

Article

Digital Twin Research on Masonry–Timber Architectural Heritage Pathology Cracks Using 3D Laser Scanning and Deep Learning Model.

Published in:

Buildings (2075-5309), 2024, v. 14, n. 4, p. 1129, doi. 10.3390/buildings14041129

By:

Luo, Shengzhong;
Wang, Hechi

Publication type:

Article

Experimental Study to Determine the Development of Axial Stiffness of Wood Screws with Increasing Load Cycles.

Published in:

Buildings (2075-5309), 2024, v. 14, n. 4, p. 1109, doi. 10.3390/buildings14041109

By:

Egner, Sebastian;
Dietsch, Philipp

Publication type:

Article

Bending Behaviour and Failure Modes of Non-Glue-Laminated Timber Beams Composed of Wooden Dowels and Self-Tapping Screws.

Published in:

Buildings (2075-5309), 2024, v. 14, n. 2, p. 394, doi. 10.3390/buildings14020394

By:

Yeh, Yu-Hsiang;
Yeh, Yi-Chi

Publication type:

Article