Works matching IS 19961944 AND DT 2023 AND VI 16 AND IP 18
Results: 273
Analysis and Optimization of Contact Material Ablation under the Cumulative Effect of the Number of Breakings of OLTC.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6344, doi. 10.3390/ma16186344
- By:
- Publication type:
- Article
Mass Spectrometry Imaging of Biomaterials.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6343, doi. 10.3390/ma16186343
- By:
- Publication type:
- Article
Comparative Analysis of the Influence of Mineral Engine Oil on the Mechanical Parameters of FDM 3D-Printed PLA, PLA+CF, PETG, and PETG+CF Materials.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6342, doi. 10.3390/ma16186342
- By:
- Publication type:
- Article
Evolution Law of Structural Form and Heat Transfer Performance of Thermal Insulation System.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6341, doi. 10.3390/ma16186341
- By:
- Publication type:
- Article
Morphology Controlled Deposition of Vanadium Oxide (VO x) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6340, doi. 10.3390/ma16186340
- By:
- Publication type:
- Article
Punching Shear Failure Analysis of Reinforced Concrete Slabs under Close-in Explosion.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6339, doi. 10.3390/ma16186339
- By:
- Publication type:
- Article
Numerical Simulation of Temperature Characteristics and Graphitization Mechanism of Diamond in Laser Powder Bed Fusion.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6338, doi. 10.3390/ma16186338
- By:
- Publication type:
- Article
Numerical Study on Residual Stresses and Plastic Strains in Cold-Formed High-Strength Steel Circular Hollow Sections.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6337, doi. 10.3390/ma16186337
- By:
- Publication type:
- Article
Intermolecular Interactions as a Measure of Dapsone Solubility in Neat Solvents and Binary Solvent Mixtures.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6336, doi. 10.3390/ma16186336
- By:
- Publication type:
- Article
Piezoresistive Effect of Conductive and Non-Conductive Fillers in Bi-Layer Hybrid CNT Composites under Extreme Strain.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6335, doi. 10.3390/ma16186335
- By:
- Publication type:
- Article
Comparison of Various Intrinsic Defect Criteria to Plot Kitagawa–Takahashi Diagrams in Additively Manufactured AlSi10Mg.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6334, doi. 10.3390/ma16186334
- By:
- Publication type:
- Article
Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6333, doi. 10.3390/ma16186333
- By:
- Publication type:
- Article
Effects of Chemicals Exposure on the Durability of Geopolymer Concrete Incorporated with Silica Fumes and Nano-Sized Silica at Varying Curing Temperatures.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6332, doi. 10.3390/ma16186332
- By:
- Publication type:
- Article
Cracking in Reinforced Concrete Cross-Sections Due to Non-Uniformly Distributed Corrosion.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6331, doi. 10.3390/ma16186331
- By:
- Publication type:
- Article
Eccentric Compression Behaviors of Self-Compacting Concrete-Filled Thin-Walled Steel Tube Columns.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6330, doi. 10.3390/ma16186330
- By:
- Publication type:
- Article
Phase Field Simulation of the Effect of Second Phase Particles with Different Orientations on the Microstructure of Magnesium Alloys.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6329, doi. 10.3390/ma16186329
- By:
- Publication type:
- Article
Does the Elapsed Time from Bleaching and the Use of Sodium Ascorbate Influence the Bond Strength of Resin Cement to Bleached Enamel?
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6328, doi. 10.3390/ma16186328
- By:
- Publication type:
- Article
Sugarcane Bagasse Ash as an Alternative Source of Silicon Dioxide in Sodium Silicate Synthesis.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6327, doi. 10.3390/ma16186327
- By:
- Publication type:
- Article
The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6326, doi. 10.3390/ma16186326
- By:
- Publication type:
- Article
Marginal Adaptation of In Vitro Class II Restorations Made Out of Bulk or Conventional Composite Using Single- or Multi-Layered Techniques.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6325, doi. 10.3390/ma16186325
- By:
- Publication type:
- Article
Adhesion Performance of Rubber Modified Asphalt in Chip Seal: A Molecular Dynamic Study.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6324, doi. 10.3390/ma16186324
- By:
- Publication type:
- Article
A Study on the Contact Characteristics of Tires–Roads Based on Pressure-Sensitive Film Technology.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6323, doi. 10.3390/ma16186323
- By:
- Publication type:
- Article
Effects of AH 3 and AFt on the Hydration–Hardening Properties of the C 4 A 3 S ¯ - C S ¯ -H 2 O System.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6322, doi. 10.3390/ma16186322
- By:
- Publication type:
- Article
Study on the Reactivity Activation of Coal Gangue for Efficient Utilization.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6321, doi. 10.3390/ma16186321
- By:
- Publication type:
- Article
Reusable, Stable, Efficient and Multifunctional Superhydrophobic and Oleophilic Polyurethane Sponge for Oil–Water Separation Prepared Using Discarded Composite Insulator.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6320, doi. 10.3390/ma16186320
- By:
- Publication type:
- Article
Alternative to Conventional Solutions in the Development of Membranes and Hydrogen Evolution Electrocatalysts for Application in Proton Exchange Membrane Water Electrolysis: A Review.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6319, doi. 10.3390/ma16186319
- By:
- Publication type:
- Article
Thermal Conductivity and Microstructure of Novel Flaxseed-Gum-Filled Epoxy Resin Biocomposite: Analytical Models and X-ray Computed Tomography.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6318, doi. 10.3390/ma16186318
- By:
- Publication type:
- Article
Experimental and Numerical Study of Concrete Fracture Behavior with Multiple Cracks Based on the Meso-Model.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6311, doi. 10.3390/ma16186311
- By:
- Publication type:
- Article
Lead-Free Halide Perovskite Nanocrystals for Light-Emitting Diodes.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6317, doi. 10.3390/ma16186317
- By:
- Publication type:
- Article
Diffusion of Alloying Cobalt Oxide (II, III) into Electrical Steel.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6315, doi. 10.3390/ma16186315
- By:
- Publication type:
- Article
The Influence of Poultry Manure-Derived Biochar and Compost on Soil Properties and Plant Biomass Growth.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6314, doi. 10.3390/ma16186314
- By:
- Publication type:
- Article
The Influence of Polyvinyl Alcohol Porogen Addition on the Nanostructural Characteristics of Hydroxyapatite.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6313, doi. 10.3390/ma16186313
- By:
- Publication type:
- Article
Measuring Thermal Diffusivity of Azoheteroarene Thin Layers by Photothermal Beam Deflection and Photothermal Lens Methods.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6312, doi. 10.3390/ma16186312
- By:
- Publication type:
- Article
Temperature and E-Poling Evolution of Structural, Vibrational, Dielectric, and Ferroelectric Properties of Ba 1−x Sr x TiO 3 Ceramics (x = 0, 0.1, 0.2, 0.3, 0.4 and 0.45).
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6316, doi. 10.3390/ma16186316
- By:
- Publication type:
- Article
Influence of Nano-SiO 2 Content on Cement Paste and the Interfacial Transition Zone.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6310, doi. 10.3390/ma16186310
- By:
- Publication type:
- Article
Effect of CrF 3 Addition on Photoluminescence Properties of Lead-Free Cs 4 SnBr 6−x F x Zero-Dimensional Perovskite.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6309, doi. 10.3390/ma16186309
- By:
- Publication type:
- Article
Effects of Beryllium Addition on Microstructure, Mechanical and Corrosion Performance of Al-Mg-Li Alloys.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6308, doi. 10.3390/ma16186308
- By:
- Publication type:
- Article
The Effect of Lattice Misfits on the Precipitation at Dislocations: Phase-Field Crystal Simulation.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6307, doi. 10.3390/ma16186307
- By:
- Publication type:
- Article
A Preliminary Study on the Use of Highly Aromatic Pyrolysis Oils Coming from Plastic Waste as Alternative Liquid Fuels.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6306, doi. 10.3390/ma16186306
- By:
- Publication type:
- Article
Production of Biodegradable Polymeric Composites with the Addition of Waste.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6305, doi. 10.3390/ma16186305
- By:
- Publication type:
- Article
Influence Analysis of Modified Polymers as a Marking Agent for Material Tracing during Cyclic Injection Molding.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6304, doi. 10.3390/ma16186304
- By:
- Publication type:
- Article
Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6303, doi. 10.3390/ma16186303
- By:
- Publication type:
- Article
Novel Antibacterial Materials and Coatings—A Perspective by the Editors.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6302, doi. 10.3390/ma16186302
- By:
- Publication type:
- Article
Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6301, doi. 10.3390/ma16186301
- By:
- Publication type:
- Article
Damage Detection in a Polymer Matrix Composite from 4D Displacement Field Measurements.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6300, doi. 10.3390/ma16186300
- By:
- Publication type:
- Article
Emergent Magnonic Materials: Challenges and Opportunities.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6299, doi. 10.3390/ma16186299
- By:
- Publication type:
- Article
Hierarchical Multiple Precursors Induced Heterogeneous Structures in Super Austenitic Stainless Steels by Cryogenic Rolling and Annealing.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6298, doi. 10.3390/ma16186298
- By:
- Publication type:
- Article
The Effect of Al and Ti Additions on Solid Solution Strengthening and Precipitation Hardening in CoNiFe Medium-Entropy Alloys.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6297, doi. 10.3390/ma16186297
- By:
- Publication type:
- Article
Synthesis and Characterization of Doped Magnesium Hydroxide for Medium Heat Storage Application.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6296, doi. 10.3390/ma16186296
- By:
- Publication type:
- Article
Stabilization of Chromium Waste by Solidification into Cement Composites.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 18, p. 6295, doi. 10.3390/ma16186295
- By:
- Publication type:
- Article