Works matching IS 19961944 AND DT 2023 AND VI 16 AND IP 8
Results: 347
Insights in Cell Biomechanics through Atomic Force Microscopy.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 2980, doi. 10.3390/ma16082980
- By:
- Publication type:
- Article
Effect of Air Velocity and Initial Conditioning on the Moisture Buffer Value of Four Different Building Materials.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3284, doi. 10.3390/ma16083284
- By:
- Publication type:
- Article
Research Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3283, doi. 10.3390/ma16083283
- By:
- Publication type:
- Article
Release Kinetics Model Fitting of Drugs with Different Structures from Viscose Fabric.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3282, doi. 10.3390/ma16083282
- By:
- Publication type:
- Article
Impact Fracture Surfaces as the Indicators of Structural Steel Post-Fire Susceptibility to Brittle Cracking.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3281, doi. 10.3390/ma16083281
- By:
- Publication type:
- Article
Multicomponent Metal Oxide- and Metal Hydroxide-Based Electrocatalysts for Alkaline Water Splitting.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3280, doi. 10.3390/ma16083280
- By:
- Publication type:
- Article
Steering Potential for Printing Highly Aligned Discontinuous Fibre Composite Filament.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3279, doi. 10.3390/ma16083279
- By:
- Publication type:
- Article
Femtosecond Laser Fabrication of Curved Plasma Channels with Low Surface Roughness and High Circularity for Multistage Laser-Wakefield Accelerators.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3278, doi. 10.3390/ma16083278
- By:
- Publication type:
- Article
The Boom in Nanomaterials for Built Heritage Conservation: Why Does Size Matter?
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3277, doi. 10.3390/ma16083277
- By:
- Publication type:
- Article
Glass-Ceramic Coating on Silver Electrode Surface via 3D Printing.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3276, doi. 10.3390/ma16083276
- By:
- Publication type:
- Article
pH-Effect in the Fabrication of ZnO Nanostructured Thin Films by Chemical Bath Deposition for Increasing the Efficiency of Solar Cells.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3275, doi. 10.3390/ma16083275
- By:
- Publication type:
- Article
Detecting Single Microwave Photons with NV Centers in Diamond.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3274, doi. 10.3390/ma16083274
- By:
- Publication type:
- Article
Efficacy of Shock Wave-Enhanced Emission Photoacoustic Streaming (SWEEPS) in the Removal of Different Combinations of Sealers Used with Two Obturation Techniques: A Micro-CT Study.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3273, doi. 10.3390/ma16083273
- By:
- Publication type:
- Article
Obtaining of Mg-Zn Co-Doped GaN Powders via Nitridation of the Ga-Mg-Zn Metallic Solution and Their Structural and Optical Properties.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3272, doi. 10.3390/ma16083272
- By:
- Publication type:
- Article
Cumulative Fatigue Damage of Composite Laminates: Engineering Rule and Life Prediction Aspect.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3271, doi. 10.3390/ma16083271
- By:
- Publication type:
- Article
Two-Dimensional Films Based on Graphene/Li 4 Ti 5 O 12 and Carbon Nanotube/Li 4 Ti 5 O 12 Nanocomposites as a Prospective Material for Lithium-Ion Batteries: Insight from Ab Initio Modeling.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3270, doi. 10.3390/ma16083270
- By:
- Publication type:
- Article
Modulating the Performance of the SAW Strain Sensor Based on Dual-Port Resonator Using FEM Simulation.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3269, doi. 10.3390/ma16083269
- By:
- Publication type:
- Article
Analysis of the Mechanical Properties of 3D-Printed Plastic Samples Subjected to Selected Degradation Effects.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3268, doi. 10.3390/ma16083268
- By:
- Publication type:
- Article
Comparative Study of the Microstructure and Properties of Cast-Fabricated and 3D-Printed Laser-Sintered Co–Cr Alloys for Removable Partial Denture Frameworks.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3267, doi. 10.3390/ma16083267
- By:
- Publication type:
- Article
Cyclic Voltammetry of Screen-Printed Carbon Electrode Coated with Ag-ZnO Nanoparticles in Chitosan Matrix.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3266, doi. 10.3390/ma16083266
- By:
- Publication type:
- Article
Modeling and Testing of a Composite Steel–Concrete Joint for Hybrid Girder Bridges.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3265, doi. 10.3390/ma16083265
- By:
- Publication type:
- Article
Single-Shot Multi-Frame Imaging of Femtosecond Laser-Induced Plasma Propagation.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3264, doi. 10.3390/ma16083264
- By:
- Publication type:
- Article
Effect of Temperature and Load on Tribological Behavior in Laser-Cladded FeCrSiNiCoC Coatings.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3263, doi. 10.3390/ma16083263
- By:
- Publication type:
- Article
Study on Concave Direction Impact Performance of Similar Concave Hexagon Honeycomb Structure.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3262, doi. 10.3390/ma16083262
- By:
- Publication type:
- Article
Comparison of Implant Surgery Methods of Cortical Tapping and Cortical Widening in Bone of Various Density: A Three-Dimensional Finite Element Study.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3261, doi. 10.3390/ma16083261
- By:
- Publication type:
- Article
Multi-Physical Field Simulation of Cracking during Crystal Growth by Bridgman Method.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3260, doi. 10.3390/ma16083260
- By:
- Publication type:
- Article
Combined Effect of Ceramic Waste Powder Additives and PVA on the Structure and Properties of Geopolymer Concrete Used for Finishing Facades of Buildings.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3259, doi. 10.3390/ma16083259
- By:
- Publication type:
- Article
Modeling of Reactive Sputtering—History and Development.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3258, doi. 10.3390/ma16083258
- By:
- Publication type:
- Article
Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3257, doi. 10.3390/ma16083257
- By:
- Publication type:
- Article
Analysis of Asphalt Mixtures Modified with Steel Slag Surface Texture Using 3D Scanning Technology.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3256, doi. 10.3390/ma16083256
- By:
- Publication type:
- Article
Mechanical, Morphological, Thermal and the Attenuation Properties of Heavy Mortars Doped with Nanoparticles for Gamma-Ray Shielding Applications.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3255, doi. 10.3390/ma16083255
- By:
- Publication type:
- Article
Derivation of Corrosion Depth Formula According to Corrosion Factors in District Heating Water through Regression Analysis.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3254, doi. 10.3390/ma16083254
- By:
- Publication type:
- Article
Measurement and Analysis of Magnetic Properties of Permalloy for Magnetic Shielding Devices under Different Temperature Environments.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3253, doi. 10.3390/ma16083253
- By:
- Publication type:
- Article
An Electrochemical Sensor for the Determination of Trace Concentrations of Cadmium, Based on Spherical Glassy Carbon and Nanotubes.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3252, doi. 10.3390/ma16083252
- By:
- Publication type:
- Article
Developing a Support Vector Regression (SVR) Model for Prediction of Main and Lateral Bending Angles in Laser Tube Bending Process.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3251, doi. 10.3390/ma16083251
- By:
- Publication type:
- Article
Research Progress of Laser Cladding on the Surface of Titanium and Its Alloys.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3250, doi. 10.3390/ma16083250
- By:
- Publication type:
- Article
Accelerating the Gas–Solid Interactions for Conductometric Gas Sensors: Impacting Factors and Improvement Strategies.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3249, doi. 10.3390/ma16083249
- By:
- Publication type:
- Article
Thermo-Hydrodynamic Lubricating Behaviors of Upstream Liquid Face Seals with Ellipse Dimples.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3248, doi. 10.3390/ma16083248
- By:
- Publication type:
- Article
Test Method for Studying the Shrinkage Effect under Controlled Environmental Conditions for Concrete Reinforced with Coconut Fibres.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3247, doi. 10.3390/ma16083247
- By:
- Publication type:
- Article
Numerical Prediction of Microstructure Evolution of Small-Diameter Stainless Steel Balls during Cold Skew Rolling.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3246, doi. 10.3390/ma16083246
- By:
- Publication type:
- Article
Applications and Properties of Hemp Stalk-Based Insulating Biomaterials for Buildings: Review.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3245, doi. 10.3390/ma16083245
- By:
- Publication type:
- Article
Algorithm of Estimation of the Degree of Porosity Homogeneity of Foamed Concretes by Local Volumes by X-ray Computed Tomography Method.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3244, doi. 10.3390/ma16083244
- By:
- Publication type:
- Article
Effects of Cu and Ag Elements on Corrosion Resistance of Dual-Phase Fe-Based Medium-Entropy Alloys.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3243, doi. 10.3390/ma16083243
- By:
- Publication type:
- Article
Microwave-Reactor-Based Preparation of Red Iron Oxide Pigment from Waste Iron Sulfate.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3242, doi. 10.3390/ma16083242
- By:
- Publication type:
- Article
The Mechanical Properties of Thin-Walled Specimens Printed from a Bronze-Filled PLA-Based Composite Filament Using Fused Deposition Modelling.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3241, doi. 10.3390/ma16083241
- By:
- Publication type:
- Article
Microstructure and Strengthening Effect of Coated Diamond Particles on the Porous Aluminum Composites.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3240, doi. 10.3390/ma16083240
- By:
- Publication type:
- Article
Effect of Heat Input on Microstructure and Mechanical Properties of Deposited Metal of E120C-K4 High Strength Steel Flux-Cored Wire.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3239, doi. 10.3390/ma16083239
- By:
- Publication type:
- Article
Evolution of Gold and Iron Oxide Nanoparticles in Conjugates with Methotrexate: Synthesis and Anticancer Effects.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3238, doi. 10.3390/ma16083238
- By:
- Publication type:
- Article
Microstructural, Mechanical, and Tribological Performances of Composites Prepared via Melt Compounding of Polyamide 6, Basalt Fibers, and Styrene–Ethylene–Butylene–Styrene Copolymer.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3237, doi. 10.3390/ma16083237
- By:
- Publication type:
- Article
Optimization of CMT Characteristic Parameters for Swing Arc Additive Manufacturing of AZ91 Magnesium Alloy Based on Process Stability Analysis.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 8, p. 3236, doi. 10.3390/ma16083236
- By:
- Publication type:
- Article