Underwater Line Monitoring Using Optimally Placed Inclinometers.

Jin, Chungkuk; Hong, Seong Hyeon

Underwater monitoring presents challenges related to maintaining a continuous power supply and communication, necessitating the use of a smaller number of sensors to effectively cover the entire line. An underwater line tracking method is proposed to evaluate global behaviors and stresses in real time. The method employs angles at several points on the line, as well as displacements and curvatures at both ends. In this method, any line displacement, angle, and curvature are expressed as Fourier series, and Fourier coefficients are obtained by utilizing sensor data. Then, the behavior of any line location is assessed. In addition, to reduce the number of sensors and improve accuracy, optimal inclinometer locations are determined by a genetic algorithm. The proposed line tracking algorithm was validated through two numerical examples; one with an inclined tunnel and one with a marine steel catenary riser attached to a Floating Production Storage and Offloading (FPSO) vessel. Through these examples, the proposed algorithm was proven to capture global behaviors accurately when optimally located sensors are used. In the riser monitoring case, the optimized sensor placement with eight intermediate sensors achieved an average mean distance error of 1.91 m, which is lower than the 2.65 m error obtained with ten intermediate sensors without optimization.

SENSOR placement; FOURIER series; GENETIC algorithms; POWER resources; INCLINOMETER

Journal of Marine Science & Engineering, 2024, Vol 12, Issue 11, p1939

2077-1312

Academic Journal

10.3390/jmse12111939