Works matching DE "ECCENTRIC loads"

Results: 1134

Experimental and Numerical Study on Reinforced Concrete Columns Strengthened with Lightweight Alkali-Activated Slag Concrete and X-Type Encased Steel.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 10, p. 1692, doi. 10.3390/buildings15101692

By:

Zhu, Jing;
Wen, Zijie;
Li, Yuankai;
Hou, Xiaomeng;
Lu, Yiqi

Publication type:

Article

High-Performance Solid Raft Foundations with Bottom Cutouts for Lightweight Tower Structures.

Published in:

Geotechnical & Geological Engineering, 2024, v. 42, n. 4, p. 2439, doi. 10.1007/s10706-023-02683-3

By:

Samorodov, Oleksandr;
Goodary, Rajeshwar;
Krotov, Oleh;
Khrapatova, Iryna

Publication type:

Article

Study of Behavior of Encased Columns Composed of Shredded Tyre Chips and Stone Aggregates in Kaolinite Clay Bed.

Published in:

Geotechnical & Geological Engineering, 2023, v. 41, n. 6, p. 3733, doi. 10.1007/s10706-023-02484-8

By:

Mazumder, Tanwee;
Neeraj, Nishant;
Ayothiraman, Ramanathan

Publication type:

Article

Numerical Investigation of the Bearing Capacity of Strip and Rectangular Shallow Footings on Cohesive Frictional Soils Under Eccentric Loads.

Published in:

Geotechnical & Geological Engineering, 2022, v. 40, n. 4, p. 1951, doi. 10.1007/s10706-021-02002-8

By:

Kalos, A.

Publication type:

Article

Reliability Assessment of Shallow Foundation Stability Under Eccentric Load Using Monte Carlo and First Order Second Moment Method.

Published in:

Geotechnical & Geological Engineering, 2021, v. 39, n. 8, p. 5651, doi. 10.1007/s10706-021-01852-6

By:

Fatolahzadeh, Sina;
Mehdizadeh, Rasool

Publication type:

Article

Ultimate Bearing Capacity Prediction of Eccentrically Inclined Loaded Strip Footings.

Published in:

Geotechnical & Geological Engineering, 2018, v. 36, n. 5, p. 3029, doi. 10.1007/s10706-018-0521-z

By:

Behera, Rabi Narayan;
Patra, Chittaranjan

Publication type:

Article

Bearing Capacity of Eccentrically-Obliquely Loaded Footings Resting on Fiber-Reinforced Sand.

Published in:

Geotechnical & Geological Engineering, 2014, v. 32, n. 1, p. 151, doi. 10.1007/s10706-013-9699-2

By:

Kaur, Arshdeep;
Kumar, Arvind

Publication type:

Article

Towards the prediction of molecular parameters from astronomical emission lines using Neural Networks.

Published in:

Experimental Astronomy, 2021, v. 52, n. 1/2, p. 157, doi. 10.1007/s10686-021-09786-w

By:

Barrientos, Alejandro;
Holdship, Jonathan;
Solar, Mauricio;
Martín, Sergio;
Rivilla, Víctor M.;
Viti, Serena;
Mangum, Jeff;
Harada, Nanase;
Sakamoto, Kazushi;
Muller, Sébastien;
Tanaka, Kunihiko;
Yoshimura, Yuki;
Nakanishi, Kouichiro;
Herrero-Illana, Rubén;
Mühle, Stefanie;
Aladro, Rebeca;
Aalto, Susanne;
Henkel, Christian;
Humire, Pedro

Publication type:

Article

Fabrication of self-reinforced polymorphic cellulose nanofiber composite microspheres for highly efficient adsorption of proteins.

Published in:

Cellulose, 2022, v. 29, n. 9, p. 5191, doi. 10.1007/s10570-022-04591-w

By:

Li, Shasha;
Wang, Yinghong;
Qiao, Liangzhi;
Du, Kaifeng

Publication type:

Article

The Inscription of Remnant Things: Zhang Dai's "Twenty-Eight Friends".

Published in:

Late Imperial China, 2021, v. 42, n. 1, p. N.PAG, doi. 10.1353/late.2021.0004

By:

Kelly, Thomas

Publication type:

Article

Comparison between MACSprep™ forensic sperm microbead kit and Erase Sperm Isolation kit for the enrichment of sperm fractions recovered from sexual assault samples.

Published in:

International Journal of Legal Medicine, 2023, v. 137, n. 1, p. 267, doi. 10.1007/s00414-022-02861-7

By:

Grosjean, Frederic;
Favre, Marylou;
Castella, Vincent

Publication type:

Article

Phase-field approach in elastoplastic solids: application of an iterative staggered scheme and its experimental validation.

Published in:

Computational Mechanics, 2021, v. 68, n. 2, p. 255, doi. 10.1007/s00466-021-02029-x

By:

Azinpour, E.;
Cruz, D. J.;
de Sa, J. M. A. Cesar;
Santos, A.

Publication type:

Article

Design, Development, Implementation, and On-orbit Performance of the Dynamic Ionosphere CubeSat Experiment Mission.

Published in:

Space Science Reviews, 2014, v. 181, n. 1-4, p. 61, doi. 10.1007/s11214-014-0034-x

By:

Fish, C.;
Swenson, C.;
Crowley, G.;
Barjatya, A.;
Neilsen, T.;
Gunther, J.;
Azeem, I.;
Pilinski, M.;
Wilder, R.;
Allen, D.;
Anderson, M.;
Bingham, B.;
Bradford, K.;
Burr, S.;
Burt, R.;
Byers, B.;
Cook, J.;
Davis, K.;
Frazier, C.;
Grover, S.

Publication type:

Article

Testing Uniaxial Stresses in Steels with Allowance for Their Magnetoelastic Sensitivity.

Published in:

Russian Journal of Nondestructive Testing, 2021, v. 57, n. 4, p. 310, doi. 10.1134/S1061830921040082

By:

Novikov, V. F.;
Kulak, S. M.;
Parakhin, A. S.

Publication type:

Article

基于遗传算法的双速行星齿轮减速器微观修形优化分析.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 3, p. 149, doi. 10.3969/j.issn.1001-3881.2025.03.021

By:

冉川东;
王士军;
王冠中

Publication type:

Article

电液负载敏感分流同步纠偏驱动系统仿真分析.

Published in:

Machine Tool & Hydraulics, 2024, v. 52, n. 14, p. 153, doi. 10.3969/j.issn.1001-3881.2024.14.024

By:

胡继东;
罗艳蕾

Publication type:

Article

新型静压支承结构液压缸力学性能分析与实验.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 20, p. 93, doi. 10.3969/j.issn.1001-3881.2023.20.015

By:

史文杰;
段恩业;
李冬明;
邱永宁;
朱伟

Publication type:

Article

电液四缸位置伺服系统同步控制策略研究.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 20, p. 100, doi. 10.3969/j.issn.1001-3881.2023.20.016

By:

段国元;
杜厚羿;
黄华;
饶俊森;
王勇敢;
张兵

Publication type:

Article

节流孔直径和分布对静压气浮主轴稳态性能的影响.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 20, p. 9, doi. 10.3969/j.issn.1001-3881.2023.20.002

By:

马城辉;
王鹏峰;
朱远哲;
高翔;
李孝禄;
李运堂

Publication type:

Article

大姜播种机液压系统设计及联合仿真分析.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 19, p. 182, doi. 10.3969/j.issn.1001-3881.2023.19.028

By:

林云龙;
杨发展;
扈伟昊;
黄珂

Publication type:

Article

基于ROMAX的斜齿轮齿面修形优化设计.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 10, p. 89, doi. 10.3969/j.issn.1001-3881.2023.10.016

By:

张宇航;
刘康;
谢光玉;
张智超

Publication type:

Article

基于齿轮微观修形的行星减速器减振降噪研究.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 1, p. 7, doi. 10.3969/j.issn.1001-3881.2023.01.002

By:

王鑫兴;
王士军;
王文龙;
徐传法;
王冉

Publication type:

Article

COMPARISON OF PERFORMANCE AND COST ANALYSIS OF COLD ROLLED STEEL STRUCTURES WITH REINFORCED CONCRETE IN A TWO STORY HOUSE.

Published in:

Eduvest: Journal Of Universal Studies, 2025, v. 5, n. 1, p. 11, doi. 10.59188/eduvest.v5i1.50258

By:

Darmawan, Andun Sulistyo;
Iranata, Data

Publication type:

Article

Analytical, Experimental, and Finite Element Study of Stress Concentration for Samples Printed on Masked Stereolithography Devices.

Published in:

Applied Mechanics, 2025, v. 6, n. 1, p. 21, doi. 10.3390/applmech6010021

By:

Pinto, Carla Carvalho;
Silva, Fernando de Azevedo;
Guidi, Erick Siqueira

Publication type:

Article

考虑多维正应力的波形钢腹板组合箱梁疲劳性能分析.

Published in:

Transportation Science & Technolgy, 2023, n. 2, p. 98, doi. 10.13691/j.issn.1671-7570.202.02.020

By:

张云周;
李强

Publication type:

Article

CRTS皿型板式无砟轨道底座凹槽四角裂缝产生机理及结构优化措施研究.

Published in:

Railway Standard Design, 2023, v. 67, n. 2, p. 43, doi. 10.13238/j.issn.1004-2954.202202140001

By:

刘增杰;
任西冲;
张政;
刘杰

Publication type:

Article

Deflection Force and Deformation of CWR in Small Radius Curve Section of Viaduct.

Published in:

Railway Standard Design, 2022, v. 66, n. 12, p. 38, doi. 10.13238/j.issn.1004-2954.202109090002

By:

LIU Wenwu;
LUO Xinwei;
FENG Qingsong;
SUN Kui;
XU Chenxiao

Publication type:

Article

Corrosion of Steel Reinforcement in Buried Alkali-Activated Slag Concrete under Stray Current and Complex Ion Action.

Published in:

Bulletin of the Chinese Ceramic Society, 2024, v. 43, n. 10, p. 3595

By:

LI Xiangxiang;
JIN Zuquan;
PANG Bo

Publication type:

Article

Influence of Undisturbed Sea Sand on Mechanical Properties of Concrete.

Published in:

Bulletin of the Chinese Ceramic Society, 2024, v. 43, n. 6, p. 2149

By:

ZHENG Jianlan;
WANG Yasi;
YE Yan

Publication type:

Article

Compressive Strength Growth Law and Prediction Model for CTB-50 Cement-Stabilized Macadam Based on Vertical Vibration Compression.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 8, p. 3045

By:

JIANG Yingjun;
WANG Yuxin;
ZHOU Chuanrong;
LI Mingjie;
YANG Ming;
JIANG Xuemeng

Publication type:

Article

Fatigue Resistance of Fiber Reinforced Lightweight Aggregate Concrete with High Content Mineral Admixture.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 8, p. 2856

By:

LI Haijiao;
WANG Jiajun;
HAN Xiping;
TAO Qi;
ZHANG Shilong

Publication type:

Article

Cyclic Compression Performance and Constitutive Relationship of Carbon Fiber Recycled Aggregate Concrete.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 8, p. 2743

By:

WU Huiqin;
LIU Xingchi;
CHEN Yuliang

Publication type:

Article

GFRP 布被动约束标准煤矸石混凝土圆柱轴压性能细观模拟.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 7, p. 2458

By:

李庆文;
禹萌萌;
刘艺伟;
曹行;
高森林;
聂帆帆;
李玲

Publication type:

Article

GFRP-珊瑚礁混凝土柱偏心受压承载性能及弯曲延性分析.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 7, p. 2409

By:

关纪文;
陈华;
常萍;
梁庆文;
但宇;
杨汉宁;
陈红梅

Publication type:

Article

Preparation and Properties of Sintered Ceramsite Prepared by Engineering Slurry Dehydrated Slurry Cake.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 6, p. 2062

By:

SHEN Yihang;
CHEN Ping;
LOU Honghai;
SHEN Yunyang;
WANG Ziang;
ZHAN Liangtong

Publication type:

Article

FDN-C对高塑性黏土力学特性的影响与机理分析.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 5, p. 1822

By:

刘云霄;
顾凡;
周辉;
崔桓荣;
习婷

Publication type:

Article

钢渣■矿渣透水混凝土力学性能的试验研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 5, p. 1767

By:

陈尚鸿;
林佳福;
杨政险;
张勇;
熊晓立

Publication type:

Article

基于三点开口梁弯曲试验分析3D端钩钢纤维混凝土抗弯性能.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 5, p. 1661

By:

吴礼程;
陈湘生;
雷江松;
郑爱元;
王雪涛;
邓一三

Publication type:

Article

弯曲应力作用下不同钢筋种类和保护层厚度珊瑚混凝土的钢筋锈蚀研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 3, p. 898

By:

邓潇;
吴庆

Publication type:

Article

持续荷载和锂渣取代量对混凝土抗氯离子渗透性能的影响.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 2, p. 598

By:

李宇航;
温勇;
韩国旗;
郝恩泽;
刘佳;
马丽莎

Publication type:

Article

真空去水压制成型对机制砂混凝土性能的影响.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 2, p. 478

By:

周朋;
王有旗;
赵双林;
刘普前;
崔立朕;
孟勇;
徐晶;
詹培敏

Publication type:

Article

地聚物橡胶混凝土的力学、抗冲击性能及强度机理分析.

Published in:

Bulletin of the Chinese Ceramic Society, 2023, v. 42, n. 1, p. 239

By:

杨鹏辉;
姚远

Publication type:

Article

型钢与地聚合物混凝土粘结滑移性能研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 10, p. 3475

By:

孙航;
陈娟;
胡现岳;
胡鹏兵

Publication type:

Article

预氧化处理对反应烧结碳化硅微观结构和弯曲强度的影响.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 8, p. 2889

By:

郝鸿渐;
李海燕;
万德田;
包亦望;
李月明

Publication type:

Article

FRP 筋异强混凝土叠浇梁挠度与延性研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 8, p. 2739

By:

张建波;
陈升平;
卢应发

Publication type:

Article

玄武岩复合材料筋增强ECC 受拉性能及裂缝控制机理.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 8, p. 2684

By:

欧阳建新;
郭荣鑫;
万夫雄;
马倩敏;
杨洋

Publication type:

Article

不同应变率下聚甲醛纤维机场道面混凝土弯曲性能研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 7, p. 2268

By:

王祯辉;
郭荣鑫;
晏永;
张久长;
李黎山

Publication type:

Article

持续荷载与干湿循环耦合作用下混凝土毛细吸水性能试验研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 6, p. 1998

By:

汪林志;
高明中;
杨德传;
王鹏

Publication type:

Article

硫酸盐侵蚀下混凝土单轴压缩力学行为模拟及孔隙特征研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 3, p. 818

By:

范红君;
徐威;
申磊;
王旭;
胡秀月;
高聪;
张瀚文

Publication type:

Article

动态疲劳荷载下玄武岩纤维混凝土抗渗性衰减及机理研究.

Published in:

Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 3, p. 810

By:

郭寅川;
谢波;
周利超;
赵子豪;
黄炜

Publication type:

Article