Works matching IS 19718993 AND DT 2025

Results: 44

Application of perforated PEEK framework for improving strength of a bases of removable complete denture for maxilla.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 280, doi. 10.3221/igf-esis.19.20

By:

Akhmedov, Kamalutdin;
Arutyunov, Dmitry;
Lomakin, Mikhail;
Bochkareva, Svetlana;
Panov, Iliya;
Panin, Sergey;
Mustafaev, Magomet;
Mustafaeva, Sofiat

Publication type:

Article

Experimental and theoretical study of used GFRP I-profile composite columns.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 263, doi. 10.3221/IGF-ESIS.72.19

By:

M. Khalil, Mohammed Abdel-Rahman;
Shoeib Soliman, Ata El-Kariem;
Sheriff, Alaa Gamal;
Salem, Mohammed M.

Publication type:

Article

Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 247, doi. 10.3221/IGF-ESIS.72.18

By:

Naboulsi, Nassima;
Majid, Fatima;
Hachimi, Taoufik;
Dadoun, Soufyan;
Barhoumi, Najoua;
Khlifi, Kaouther

Publication type:

Article

Effect of fracture energy estimation on the predictions of mode II behavior of bonded joints using cohesive zone models.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 236, doi. 10.3221/IGF-ESIS.72.17

By:

Perrella, Michele;
Armentani, Enrico;
Lamanna, Giuseppe;
Berardi, Valentino Paolo

Publication type:

Article

Effect of contact geometry, loading, material properties and relative slip on the fretting fatigue behaviour of metallic components.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 225, doi. 10.3221/IGF-ESIS.72.16

By:

Zanichelli, Andrea;
Carpinteri, Andrea;
Ronchei, Camilla;
Scorza, Daniela

Publication type:

Article

Experimental and computational investigation of tensile and flexural properties of polylactic acid filled with boron nitride nanoplatelets.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 211, doi. 10.3221/IGF-ESIS.72.15

By:

Sundarasetty, Harishbabu;
Sahu, Santosh Kumar

Publication type:

Article

Structural behavior of GFRP-concrete composite beams.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 193, doi. 10.3221/IGF-ESIS.72.14

By:

M. Khalil, Mohammed Abdel-Rahman;
Shoeib Soliman, Ata El-Kariem;
Sheriff, Alaa Gamal;
Salem, Mohammed M.

Publication type:

Article

Comparative assessment of the acoustic activity and the Pressure Stimulated Voltage in marble specimens under compression.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 179, doi. 10.3221/IGF-ESIS.72.13

By:

Kourkoulis, Stavros K.;
Pasiou, Ermioni D.;
Triantis, Dimos;
Stavrakas, Ilias

Publication type:

Article

Augmentation method of fatigue data of welded structures based on physics-informed CTGAN.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 162, doi. 10.3221/IGF-ESIS.72.12

By:

Xinyu Cao;
Li Zou;
Chen Lu

Publication type:

Article

Mechanical properties of SiC nanoparticle-reinforced Al-2024 alloy.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 148, doi. 10.3221/IGF-ESIS.72.11

By:

Niyaz Ahamed, M. B.;
Kumar, H. S. Naveen;
Anilkumar, S. Kallimani;
Ibrahim, Alqahtani;
Saleemsab, Doddamani;
Hareesha, G.

Publication type:

Article

Influence of Silicon NanoSheet (SiNS) on the toughness of Biphasic Calcium Phosphate (BCP) composites.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 137, doi. 10.3221/IGF-ESIS.72.10

By:

AL-Obaidi, Anwer;
Dalfi, Hussein K.;
Abdulridha, Nazar;
Alomarah, Amer

Publication type:

Article

A digital twin framework with MobileNetV2 for damage detection in slab structures.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 121, doi. 10.3221/IGF-ESIS.72.09

By:

Duong Huong Nguyen;
Huan Nguyen;
Xiaohong Gao

Publication type:

Article

Studying the fracture surface of brass CuZn37 and aluminum 1100 and their relationship with formability in Single Point Incremental Forming.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 102, doi. 10.3221/IGF-ESIS.72.08

By:

Qate'a, Marwa K.;
Jweeg, Muhsin J.;
Mohammed, Adnan I.

Publication type:

Article

Investigation on the characterization and modelling of Fracture Process Zone behavior in Concrete Beams subjected to Three-Point Loading Tests.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 80, doi. 10.3221/IGF-ESIS.72.07

By:

Vishwanatha, H. S.;
Muralidhara, S.;
Prasad, B. K. Raghu

Publication type:

Article

Study of the forming limit of 6063 aluminum alloy perforated sheet under in-plane and out-of-plane stretching conditions.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 62, doi. 10.3221/IGF-ESIS.72.06

By:

Lakache, Houssem Eddine;
May, Abdelghani;
Ouali, Mohand Ould;
Mokdad, Abdelghani;
Benabou, Lahouari

Publication type:

Article

Evaluation of thinning behaviour under the influence of plastic hardening and surface friction during small punch test.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 46, doi. 10.3221/IGF-ESIS.72.05

By:

Pandit, S. C.;
Alang, N. A.;
Ferdous, I. U.;
Alias, J.;
Hassan, M. F.;
Ahmad, A. H.

Publication type:

Article

Improved flexural behaviour of reinforced concrete beam strengthened using stainless steel wire mesh.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 34, doi. 10.3221/IGF-ESIS.72.04

By:

Shah, Shail;
Raithatha, Parth;
Raiyani, Sunil D.

Publication type:

Article

Numerical study of residual stress fields after double-sided symmetric laser shock peening of blade edge.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 26, doi. 10.3221/IGF-ESIS.72.03

By:

Bartolomei, Mariia L.;
Kudryashev, Igor S.;
Sabirov, Rustam R.;
Korsunsky, Alexander M.

Publication type:

Article

Rolling contact fatigue performance of a TiN coating deposited on AISI 440C by plasma based ion implantion and deposition.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 15, doi. 10.3221/IGF-ESIS.72.02

By:

Paula González, María;
Colombo, Diego A.;
Fernandino, Diego O.

Publication type:

Article

Axial behaviour of Concrete Filled Double Skinned Steel Tubular (CFDST) column with concrete imperfections.

Published in:

Fracture & Structural Integrity, 2025, n. 72, p. 1, doi. 10.3221/IGF-ESIS.72.01

By:

Patel, Arth J.;
Purohit, Sharadkumar P.

Publication type:

Article

Development and mechanical characterization of eggshell bio-filler reinforced bamboo fiber composites.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 330, doi. 10.3221/IGF-ESIS.71.24

By:

Khan, Afroz;
Naveen Kumar, B. K.;
Anand, K. J.;
Ashoka, E.;
Hareesha, G.

Publication type:

Article

Reuse of sheep wool fibers in the production of ultralightweight foamed concrete: effect of fiber treatment, length, and content on the mechanical properties.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 317, doi. 10.3221/IGF-ESIS.71.23

By:

Celi, Adriana Bravo;
Falliano, Devid;
Parmigiani, Silvia;
Suarez-Riera, Daniel;
Ferro, Giuseppe Andrea;
Restuccia, Luciana

Publication type:

Article

Revisiting classical concepts of Linear Elastic Fracture Mechanics - Part III: The stress field in a double-edge notched finite strip by means of the “stress-neutralization” technique.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 302, doi. 10.3221/IGF-ESIS.71.22

By:

Markides, Christos F.;
Kourkoulis, Stavros K.

Publication type:

Article

Effect of hybrid nano particle reinforcements on fractographic, mechanical and wear behavior of Al6061 alloy composites manufactured by ultrasonic assisted stir casting technique.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 285, doi. 10.3221/IGF-ESIS.71.21

By:

Krishnappa, Annapoorna;
Ramesh, Shobha;
Murthy, Bharath Vedashantha;
Siddagangappa, Rajanna;
Ashokkumar, Srimadhu;
Nagaral, Madeva;
Auradi, Virupaxi

Publication type:

Article

Stochastic modeling of structural fatigue damage in High Strength Steel structures.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 273, doi. 10.3221/IGF-ESIS.71.20

By:

Brozovsky, Jiri;
Krejsa, Martin;
Lehner, Petr;
Parenica, Premysl;
Seitl, Stanislav

Publication type:

Article

Long-term development of mechanical properties of concrete with different water to cement ratio and internal curing ability.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 263, doi. 10.3221/IGF-ESIS.71.19

By:

Bilek, Vlastimil;
Pešata, Michal;
Matyskova, Kateřina

Publication type:

Article

Residual stresses caused by static and dynamic contact interaction of composite plate and steel spherical indenter.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 246, doi. 10.3221/IGF-ESIS.71.18

By:

Eleonsky, Sviatoslav;
Pisarev, Vladimir

Publication type:

Article

Mechanical testing of miniature carbon fiber reinforced polymer (CFRP) samples under digital light microscopy.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 239, doi. 10.3221/IGF-ESIS.71.17

By:

Statnik, E. S.;
Sadykova, Iu. A.;
Prokopev, E. N.;
Salimon, A. I.;
Nazarov, E. V.;
Turbin, N. V.;
Korsunsky, A. M.

Publication type:

Article

The influence of plastic flow localization on the surface morphology of aluminum alloy specimens subjected to complex loading.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 223, doi. 10.3221/IGF-ESIS.71.16

By:

Chechulina, Evgeniia A.;
Oborin, Vladimir A.;
Gribov, Dmitriy S.

Publication type:

Article

Critical length parameter of HDPE and its use in fatigue lifetime predictions.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 211, doi. 10.3221/IGF-ESIS.71.15

By:

Kozáková, Kamila;
Trávníček, Lukáš;
Poduška, Jan;
Klusák, Jan

Publication type:

Article

Investigating the repair of cracks through bacterial self-healing for sustainable concrete in aggressive sulfate attack environments.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 194, doi. 10.3221/IGF-ESIS.71.14

By:

Elmenshawy, Yasmine;
Ahmad, Seleem S. E.;
El Gammal, Yasser Osman;
ElSheikh, Hamees Mohamad;
Moawad, Mohamed;
Elshami, Ahmed A.;
Elmahdy, Mohamed A. R.

Publication type:

Article

Numerical study of delamination process of the CFRP composite.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 182, doi. 10.3221/IGF-ESIS.71.13

By:

Kormanikova, Eva;
Kotrasova, Kamila

Publication type:

Article

Integrating AI and statistical methods for enhancing civil structures: current trends, practical issues and future direction.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 164, doi. 10.3221/IGF-ESIS.71.12

By:

Anjum, Asraar;
Hrairi, Meftah;
Aabid, Abdul;
Yatim, Norfazrina;
Ali, Maisarah

Publication type:

Article

Numerical analysis of 3D printed joint of wooden structures regarding mechanical and fatigue behaviour.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 151, doi. 10.3221/IGF-ESIS.71.11

By:

Lehner, Petr;
Pařenica, Přemysl;
Juračka, David;
Krejsa, Martin

Publication type:

Article

Effect of temperature and adhesive defect on repaired structure using composite patch.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 124, doi. 10.3221/IGF-ESIS.71.10

By:

Abdulla, Mohammed;
Hrairi, Meftah;
Aabid, Abdul;
Abdullah, Nur Azam

Publication type:

Article

Integrated FEM-Multibody Co-Simulation of Additively Manufactured Hip Prosthesis containing cracks.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 108, doi. 10.3221/IGF-ESIS.71.09

By:

Di Bona, Roberto;
Gentile, Domenico;
Vanoli, Giuseppe Peter;
Testa, Gabriel;
Ricci, Sara

Publication type:

Article

Low-carbon cementitious composite incorporated with biochar and recycled fines suitable for 3D printing applications: hydration, shrinkage and early-age performance.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 91, doi. 10.3221/IGF-ESIS.71.08

By:

Federowicz, Karol;
Cendrowski, Krzysztof;
Sikora, Paweł

Publication type:

Article

Effect of cast part size on the microstructure and mechanical properties of a bainitic High-Carbon and High-Silicon Cast Steel.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 80, doi. 10.3221/IGF-ESIS.71.07

By:

Tenaglia, N. E.;
Fernandino, D. O.;
Basso, A. D.

Publication type:

Article

Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 67, doi. 10.3221/IGF-ESIS.71.06

By:

Doubek, Pavel;
Kumpová, Ivana;
Malíková, Lucie;
Al Khazali, Mohammad Sami;
Seitl, Stanislav

Publication type:

Article

Epoxy-based composites with size-fractionated waste Areca sheath: an experimental investigation on the macroscopic and vibrational properties.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 49, doi. 10.3221/IGF-ESIS.71.05

By:

Varghese, Lijo;
Mohan Kumar, G. C.

Publication type:

Article

Microstructure, mechanical and fractographic behaviour of the diffusion welded joints of AA2219 and Ti-6Al-4V for aerospace applications.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 37, doi. 10.3221/IGF-ESIS.71.04

By:

Vatnalmath, Manjunath;
Auradi, V.;
V., Bharath;
Bharadwaj, Anirudh;
Gowda, Chethan;
Nagaral, Madeva

Publication type:

Article

Mechanical, fracture and thermal characterization of post-cured hybrid epoxy nanocomposites reinforced with Graphene nanoplatelets and h-Boron Nitride.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 22, doi. 10.3221/IGF-ESIS.71.03

By:

Choukimath, Mantesh C.;
Banapurmath, N. R.;
Umarfarooq, M. A.

Publication type:

Article

Indentation fracture toughness of Aluminium-Graphite composites: influence of nano-particles.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 11, doi. 10.3221/IGF-ESIS.71.02

By:

Ibrahim, Alqahtani;
Ahmed, B. Niyaz;
Ashoka, E.;
Rajesh, A. M.;
Bharath, P. B.;
Saleemsab, Doddamani

Publication type:

Article

Effect of internal technological defects and loading waveform on CFRP fatigue life.

Published in:

Fracture & Structural Integrity, 2025, v. 19, n. 71, p. 1, doi. 10.3221/IGF-ESIS.71.01

By:

Lobanov, D. S.;
Lykova, A. V.;
Pankov, A. M.;
Ugolnikov, M. V.

Publication type:

Article