Works matching IS 19718993 AND DT 2015
Results: 134
2D size, position and shape definition of defects by B-scan image analysis.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 622, doi. 10.3221/IGF-ESIS.34.68
- By:
- Publication type:
- Article
Thermal stress analysis of different full and ventilated disc brakes.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 608, doi. 10.3221/IGF-ESIS.34.67
- By:
- Publication type:
- Article
On the decay of strength in Guilin red clay with cracks.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 599, doi. 10.3221/IGF-ESIS.34.66
- By:
- Publication type:
- Article
Defect detection of wire rope for oil well based on adaptive angle.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 590, doi. 10.3221/IGF-ESIS.34.65
- By:
- Publication type:
- Article
Biaxial fatigue behavior of a powder metallurgical TRIP steel.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 580, doi. 10.3221/IGF-ESIS.34.64
- By:
- Publication type:
- Article
A comparative study on dynamic mechanical performance of concrete and rock.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 574, doi. 10.3221/IGF-ESIS.34.63
- By:
- Publication type:
- Article
Study of drilling muds on the anti-erosion property of a fluidic amplifier in directional drilling.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 564, doi. 10.3221/IGF-ESIS.34.62
- By:
- Publication type:
- Article
Robust design of a polygonal shaft-hub coupling.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 554, doi. 10.3221/IGF-ESIS.34.61
- By:
- Publication type:
- Article
Meso-mechanics simulation analysis of microwave-assisted mineral liberation.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 543, doi. 10.3221/IGF-ESIS.34.60
- By:
- Publication type:
- Article
Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 534, doi. 10.3221/IGF-ESIS.34.59
- By:
- Publication type:
- Article
Crack path and fracture surface modifications in cement composites.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 524, doi. 10.3221/IGF-ESIS.34.58
- By:
- Publication type:
- Article
DBEM crack propagation for nonlinear fracture problems.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 514, doi. 10.3221/IGF-ESIS.34.57
- By:
- Publication type:
- Article
Paths of interactive cracks in creep conditions.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 507, doi. 10.3221/IGF-ESIS.34.56
- By:
- Publication type:
- Article
Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 498, doi. 10.3221/IGF-ESIS.34.55
- By:
- Publication type:
- Article
Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 487, doi. 10.3221/IGF-ESIS.34.54
- By:
- Publication type:
- Article
Modelling of ultrasonic impact treatment (UIT) of welded joints and its effect on fatigue strength.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 476, doi. 10.3221/IGF-ESIS.34.53
- By:
- Publication type:
- Article
Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 466, doi. 10.3221/IGF-ESIS.34.52
- By:
- Publication type:
- Article
Combined lock-in thermography and heat flow measurements for analysing heat dissipation during fatigue crack propagation.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 456, doi. 10.3221/IGF-ESIS.34.51
- By:
- Publication type:
- Article
Effect of centrifugal load on crack path in thin-rimmed and webbed gears.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 447, doi. 10.3221/IGF-ESIS.34.50
- By:
- Publication type:
- Article
Fatigue crack growth in additive manufactured products.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 437, doi. 10.3221/IGF-ESIS.34.49
- By:
- Publication type:
- Article
Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 427, doi. 10.3221/IGF-ESIS.34.48
- By:
- Publication type:
- Article
Multiscale study of fracture in aluminum-magnesium alloy under fatigue and dynamic loading.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 422, doi. 10.3221/IGF-ESIS.34.47
- By:
- Publication type:
- Article
Fatigue crack micromechanisms in a Cu-Zn-Al shape memory alloy with pseudo-elastic behavior.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 415, doi. 10.3221/IGF-ESIS.34.46
- By:
- Publication type:
- Article
Degenerated graphite nodules influence on fatigue crack paths in a ferritic ductile cast iron.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 406, doi. 10.3221/IGF-ESIS.34.45
- By:
- Publication type:
- Article
Improvement of adhesion performance of mortar-repair interface with inducing crack path into repair.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 397, doi. 10.3221/IGF-ESIS.34.44
- By:
- Publication type:
- Article
On the crack path under mixed mode loading on PUR foams.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 387, doi. 10.3221/IGF-ESIS.34.43
- By:
- Publication type:
- Article
Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 379, doi. 10.3221/IGF-ESIS.34.42
- By:
- Publication type:
- Article
Investigation of crack paths in natural fibre-reinforced composites.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 371, doi. 10.3221/IGF-ESIS.34.41
- By:
- Publication type:
- Article
Understanding the edge crack phenomenon in ceramic laminates.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 362, doi. 10.3221/IGF-ESIS.34.40
- By:
- Publication type:
- Article
EBSD-assisted fractographic analysis of crack paths in magnesium alloy.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 355, doi. 10.3221/IGF-ESIS.34.39
- By:
- Publication type:
- Article
Fatigue crack paths and properties in A356-T6 aluminum alloy microstructurally modified by friction stir processing under different conditions.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 347, doi. 10.3221/IGF-ESIS.34.38
- By:
- Publication type:
- Article
Graphene as a model system for 2D fracture behavior of perfect and defective solids.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 341, doi. 10.3221/IGF-ESIS.34.37
- By:
- Publication type:
- Article
Effect of defect length on rolling contact fatigue crack propagation in high strength steel.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 334, doi. 10.3221/IGF-ESIS.34.36
- By:
- Publication type:
- Article
Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 326, doi. 10.3221/IGF-ESIS.34.35
- By:
- Publication type:
- Article
Crack growth simulation in heterogeneous material by S-FEM and comparison with experiments.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 318, doi. 10.3221/IGF-ESIS.34.34
- By:
- Publication type:
- Article
Fatigue crack propagation in short-fiber reinforced plastics.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 309, doi. 10.3221/IGF-ESIS.34.33
- By:
- Publication type:
- Article
Experimental analysis of crack evolution in concrete by the acoustic emission technique.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 300, doi. 10.3221/IGF-ESIS.34.32
- By:
- Publication type:
- Article
Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100-years operating time.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 290, doi. 10.3221/IGF-ESIS.34.31
- By:
- Publication type:
- Article
Crack propagation in fracture mechanical graded structures.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 280, doi. 10.3221/IGF-ESIS.34.30
- By:
- Publication type:
- Article
Influence of vacuum carburizing treatment on fatigue crack growth characteristic in DSG2.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 271, doi. 10.3221/IGF-ESIS.34.29
- By:
- Publication type:
- Article
Evaluation of near-threshold fatigue crack propagation in Ti-6Al-4V Alloy with harmonic structure created by Mechanical Milling and Spark Plasma Sintering.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 261, doi. 10.3221/IGF-ESIS.34.28
- By:
- Publication type:
- Article
The concept of the average stress in the fracture process zone for the search of the crack path.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 255, doi. 10.3221/IGF-ESIS.34.27
- By:
- Publication type:
- Article
In situ observation of rolling contact fatigue cracks by laminography using ultrabright synchrotron radiation.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 246, doi. 10.3221/IGF-ESIS.34.26
- By:
- Publication type:
- Article
Modelling 3D crack propagation in ageing graphite bricks of Advanced Gas-cooled Reactor power plant.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 237, doi. 10.3221/IGF-ESIS.34.25
- By:
- Publication type:
- Article
Applications of lattice method in the simulation of crack path in heterogeneous materials.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 226, doi. 10.3221/IGF-ESIS.34.24
- By:
- Publication type:
- Article
Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 216, doi. 10.3221/IGF-ESIS.34.23
- By:
- Publication type:
- Article
Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 208, doi. 10.3221/IGF-ESIS.34.22
- By:
- Publication type:
- Article
Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 199, doi. 10.3221/IGF-ESIS.34.21
- By:
- Publication type:
- Article
Three-dimensional effects on cracked discs and plates under nominal Mode III loading.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 190, doi. 10.3221/IGF-ESIS.34.20
- By:
- Publication type:
- Article
High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components.
- Published in:
- Fracture & Structural Integrity, 2015, v. 9, p. 180, doi. 10.3221/IGF-ESIS.34.19
- By:
- Publication type:
- Article