Works matching IS 19718993 AND DT 2014
Results: 122
Transverse strength of railway tracks: part 2. Test system for ballast resistance in line measurement.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 578, doi. 10.3221/IGF-ESIS.30.69
- By:
- Publication type:
- Article
Transverse strength of railway tracks: part 3. Multiple scenarios test field.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 593, doi. 10.3221/IGF-ESIS.30.70
- By:
- Publication type:
- Article
Investigation of very high cycle fatigue by thermographyc method.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 569, doi. 10.3221/IGF-ESIS.30.68
- By:
- Publication type:
- Article
On the notch sensitivity of cast iron under multi-axial fatigue loading.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 558, doi. 10.3221/IGF-ESIS.30.67
- By:
- Publication type:
- Article
Identification of the plastic zone using digital image correlation.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 552, doi. 10.3221/IGF-ESIS.30.66
- By:
- Publication type:
- Article
An analysis research of the stiffness characteristics of hospital building materials.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 545, doi. 10.3221/IGF-ESIS.30.65
- By:
- Publication type:
- Article
A research on detecting and recognizing bridge cracks in complex underwater conditions.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 537, doi. 10.3221/IGF-ESIS.30.64
- By:
- Publication type:
- Article
Time-history simulation of civil architecture earthquake disaster relief-based on the three-dimensional dynamic finite element method.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 526, doi. 10.3221/IGF-ESIS.30.63
- By:
- Publication type:
- Article
Energy dissipation mechanism and damage model of marble failure under two stress paths.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 515, doi. 10.3221/IGF-ESIS.30.62
- By:
- Publication type:
- Article
Research on parameters optimization of bilateral ring gear blank-holder in thick-plate fine blanking.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 502, doi. 10.3221/IGF-ESIS.30.61
- By:
- Publication type:
- Article
Degradation assessment of waterlogged wood at Haimenkou site.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 495, doi. 10.3221/IGF-ESIS.30.60
- By:
- Publication type:
- Article
Effect of nonlinearity of restrainer and supports on the elasto-plastic seismic response of continuous girder bridge.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 486, doi. 10.3221/IGF-ESIS.30.59
- By:
- Publication type:
- Article
Transverse strength of railway tracks: part 1. Planning and experimental setup.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 478, doi. 10.3221/IGF-ESIS.30.58
- By:
- Publication type:
- Article
Dynamic additional loads influencing the fatigue life of gears in an electric vehicle transmission.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 469, doi. 10.3221/IGF-ESIS.30.57
- By:
- Publication type:
- Article
Stress triaxiality influence on damaging micromechanisms in a pearlitic ductile cast iron.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 462, doi. 10.3221/IGF-ESIS.30.56
- By:
- Publication type:
- Article
Fatigue crack behavior on a Cu-Zn-Al SMA.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 454, doi. 10.3221/IGF-ESIS.30.55
- By:
- Publication type:
- Article
Investigation about crack propagation paths in thin rim gears.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 446, doi. 10.3221/IGF-ESIS.30.54
- By:
- Publication type:
- Article
Integrated assessment procedure for determining the fracture strength of glass components in CSP systems.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 438, doi. 10.3221/IGF-ESIS.30.53
- By:
- Publication type:
- Article
Interlaminar fracture in woven carbon/epoxy laminates.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 431, doi. 10.3221/IGF-ESIS.30.52
- By:
- Publication type:
- Article
Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 424, doi. 10.3221/IGF-ESIS.30.51
- By:
- Publication type:
- Article
Duplex S-N fatigue curves: statistical distribution of the transition fatigue life.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 417, doi. 10.3221/IGF-ESIS.30.50
- By:
- Publication type:
- Article
Failure of cargo aileron's actuator.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 409, doi. 10.3221/IGF-ESIS.30.49
- By:
- Publication type:
- Article
Impact response of balsa core sandwiches.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 403, doi. 10.3221/IGF-ESIS.30.48
- By:
- Publication type:
- Article
Evaluation of the material's damage in gas turbine rotors by instrumented spherical indentation.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 394, doi. 10.3221/IGF-ESIS.30.47
- By:
- Publication type:
- Article
Determining fracture energy parameters of concrete from the modified compact tension test.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 383, doi. 10.3221/IGF-ESIS.30.46
- By:
- Publication type:
- Article
Numerical modelling of reinforced concrete beams with fracture-plastic material.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 375, doi. 10.3221/IGF-ESIS.30.45
- By:
- Publication type:
- Article
Application of Digital Image Correlation (DIC) in resonance machines for measuring fatigue crack growth.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 369, doi. 10.3221/IGF-ESIS.30.44
- By:
- Publication type:
- Article
The effect of thickness on out-of-plane constraint in terms of the T-stress.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 311, doi. 10.3221/IGF-ESIS.30.38
- By:
- Publication type:
- Article
The effect of steady torsion on fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 360, doi. 10.3221/IGF-ESIS.30.43
- By:
- Publication type:
- Article
In-service fatigue cracking of the propeller shafts joined by a spline-pinned construction to the engines of AN-24, AN-26, and IL-18 aircrafts.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 340, doi. 10.3221/IGF-ESIS.30.41
- By:
- Publication type:
- Article
A probabilistic interpretation of the Miner number for fatigue life prediction.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 327, doi. 10.3221/IGF-ESIS.30.40
- By:
- Publication type:
- Article
Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 317, doi. 10.3221/IGF-ESIS.30.39
- By:
- Publication type:
- Article
FE analysis of cruciform welded joints considering different mechanical properties for base material, heat affected zone and weld metal.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 304, doi. 10.3221/IGF-ESIS.30.37
- By:
- Publication type:
- Article
Modification of creep and low cycle fatigue behaviour induced by welding.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 346, doi. 10.3221/IGF-ESIS.30.42
- By:
- Publication type:
- Article
Fracture-Safe and Fatigue-Reliable Structures.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 293, doi. 10.3221/IGF-ESIS.30.36
- By:
- Publication type:
- Article
Evaluation of the AZ31 cyclic elastic-plastic behaviour under multiaxial loading conditions.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 282, doi. 10.3221/IGF-ESIS.30.35
- By:
- Publication type:
- Article
Biaxial fatigue tests and crack paths for AISI 304L stainless steel.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 273, doi. 10.3221/IGF-ESIS.30.34
- By:
- Publication type:
- Article
On the use of the Theory of Critical Distances to estimate the dynamic strength of notched 6063-T5 aluminium alloy.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 220, doi. 10.3221/IGF-ESIS.30.28
- By:
- Publication type:
- Article
Use of Circumferentially Cracked Bar sample for CTOD fracture toughness determination in the upper shelf regime.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 252, doi. 10.3221/IGF-ESIS.30.32
- By:
- Publication type:
- Article
Study of short cracks under biaxial fatigue.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 244, doi. 10.3221/IGF-ESIS.30.31
- By:
- Publication type:
- Article
Double peeling of elastic pre-tensioned tapes.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 237, doi. 10.3221/IGF-ESIS.30.30
- By:
- Publication type:
- Article
Field Load Acquisition and variable amplitude fatigue testing on maxi-scooter motorcycles.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 226, doi. 10.3221/IGF-ESIS.30.29
- By:
- Publication type:
- Article
Electrical resistivity and ultrasonic measurements during sequential fracture test of cementitious composite.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 263, doi. 10.3221/IGF-ESIS.30.33
- By:
- Publication type:
- Article
Considerations on the choice of experimental parameters in residual stress measurements by hole-drilling and ESPI.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 211, doi. 10.3221/IGF-ESIS.30.27
- By:
- Publication type:
- Article
Definition of the linearity loss of the surface temperature in static tensile tests.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 201, doi. 10.3221/IGF-ESIS.30.26
- By:
- Publication type:
- Article
The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 191, doi. 10.3221/IGF-ESIS.30.25
- By:
- Publication type:
- Article
Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 174, doi. 10.3221/IGF-ESIS.30.23
- By:
- Publication type:
- Article
Stress induced martensite at the crack tip in NiTi alloys during fatigue loading.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 167, doi. 10.3221/IGF-ESIS.30.22
- By:
- Publication type:
- Article
Evolution of crack paths and compliance in round bars under cyclic tension and bending.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 182, doi. 10.3221/IGF-ESIS.30.24
- By:
- Publication type:
- Article
Damage initiation in brittle and ductile materials as revealed from a fractoluminescence study.
- Published in:
- Fracture & Structural Integrity, 2014, v. 8, p. 162, doi. 10.3221/IGF-ESIS.30.21
- By:
- Publication type:
- Article