Works matching DE "CERAMIC material manufacturing"
Results: 77
Densified Metallic MoS<sub>2</sub>/Graphene Enabling Fast Potassium‐Ion Storage with Superior Gravimetric and Volumetric Capacities.
- Published in:
- Advanced Functional Materials, 2020, v. 30, n. 32, p. 1, doi. 10.1002/adfm.202004244
- By:
- Publication type:
- Article
Phase Composition of Ceramic Materials Based on Waste of the Fuel and Energy Complex.
- Published in:
- Theoretical Foundations of Chemical Engineering, 2023, v. 57, n. 5, p. 1141, doi. 10.1134/S0040579523050287
- By:
- Publication type:
- Article
USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS.
- Published in:
- Periódico Tchê Química, 2019, v. 16, n. 33, p. 823, doi. 10.52571/ptq.v16.n33.2019.838_periodico33_pgs_823_840.pdf
- By:
- Publication type:
- Article
EFFECT OF THE ADDITION OF RICE HUSK IN TECHNOLOGICAL PROPERTIES OF MATERIALS FOR THE MANUFACTURE OF CERAMIC.
- Published in:
- Rasayan Journal of Chemistry, 2021, v. 14, n. 2, p. 712, doi. 10.31788/RJC.2021.1425900
- By:
- Publication type:
- Article
From the Editor.
- Published in:
- Wacana Seni Journal of Arts Discourse, 2019, v. 18, p. i
- By:
- Publication type:
- Article
The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies.
- Published in:
- International Journal of Molecular Sciences, 2022, v. 23, n. 4, p. 2023, doi. 10.3390/ijms23042023
- By:
- Publication type:
- Article
Characterization of materials used in the manufacture of ceramic tile with incorporation of ornamental rock waste.
- Published in:
- Agronomy Research, 2020, v. 18, n. (S1), p. 904, doi. 10.15159/AR.20.132
- By:
- Publication type:
- Article
The Dynamic Strength of ZrO<sub>2</sub>-Based Ceramic Materials Manufactured by Additive Technology.
- Published in:
- Technical Physics Letters, 2019, v. 45, n. 10, p. 984, doi. 10.1134/S1063785019100122
- By:
- Publication type:
- Article
Additive manufacturing of biocompatible ceramics.
- Published in:
- Advances in Production Engineering & Management, 2013, v. 8, n. 2, p. 96, doi. 10.14743/apem2013.2.157
- By:
- Publication type:
- Article
Application of hot-stage microscopy to evaluating sample morphology changes on heating.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2016, v. 125, n. 3, p. 1053, doi. 10.1007/s10973-016-5323-z
- By:
- Publication type:
- Article
Fabrication of alumina ceramics with high flexural strength using stereolithography.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 2983, doi. 10.1007/s00170-023-12100-x
- By:
- Publication type:
- Article
Manufacture of multipurpose composite and ceramic materials in the combustion regime and high-temperature deformation (SHS extrusion).
- Published in:
- Theoretical Foundations of Chemical Engineering, 2014, v. 48, n. 6, p. 751, doi. 10.1134/S0040579514060104
- By:
- Publication type:
- Article
Technological and Environmental Behaviour of Traditional Ceramic Bodies Obtained by Recycling of Two Types of Residues.
- Published in:
- Coatings (2079-6412), 2022, v. 12, n. 2, p. 221, doi. 10.3390/coatings12020221
- By:
- Publication type:
- Article
Laser Micro Machining of Alumina by a Picosecond Laser.
- Published in:
- Journal of Laser Micro / Nanoengineering, 2018, v. 13, n. 2, p. 76, doi. 10.2961/jlmn.2018.02.0005
- By:
- Publication type:
- Article
Teaching ceramic materials in mechanical engineering: An active learning experience.
- Published in:
- International Journal of Mechanical Engineering Education, 2023, v. 51, n. 1, p. 23, doi. 10.1177/03064190221142096
- By:
- Publication type:
- Article
Ion Channels and Electroosmosis in Porous Geopolymers: A Novel Category of Low‐Cost Memristors.
- Published in:
- Advanced Functional Materials, 2023, v. 33, n. 43, p. 1, doi. 10.1002/adfm.202306535
- By:
- Publication type:
- Article
Features of Obtaining Ceramic Materials from Sintering-Active Powders.
- Published in:
- Refractories & Industrial Ceramics, 2024, v. 64, n. 5, p. 526, doi. 10.1007/s11148-024-00884-8
- By:
- Publication type:
- Article
Preparation of Highly Porous Silicon Nitride Materials.
- Published in:
- Refractories & Industrial Ceramics, 2017, v. 58, n. 1, p. 53, doi. 10.1007/s11148-017-0053-8
- By:
- Publication type:
- Article
Experiments Using Different Types of Waste to Manufacture Ceramic Materials: Examples on a Laboratory Scale.
- Published in:
- Ceramics (2571-6131), 2024, v. 7, n. 2, p. 504, doi. 10.3390/ceramics7020033
- By:
- Publication type:
- Article
Sustainable Approaches for the Additive Manufacturing of Ceramic Materials.
- Published in:
- Ceramics (2571-6131), 2024, v. 7, n. 1, p. 291, doi. 10.3390/ceramics7010019
- By:
- Publication type:
- Article
Potentials of Numerical Methods for Increasing the Productivity of Additive Manufacturing Processes.
- Published in:
- Ceramics (2571-6131), 2023, v. 6, n. 1, p. 630, doi. 10.3390/ceramics6010038
- By:
- Publication type:
- Article
CerAMfacturing of Aluminum Nitride with High Thermal Conductivity via Lithography-Based Ceramic Vat Photopolymerization (CerAM VPP).
- Published in:
- Ceramics (2571-6131), 2023, v. 6, n. 1, p. 416, doi. 10.3390/ceramics6010024
- By:
- Publication type:
- Article
The 8200 calBP climate event and the spread of the Neolithic in Eastern Europe.
- Published in:
- Documenta Praehistorica, 2015, v. 42, p. 77, doi. 10.4312/dp.42.4
- By:
- Publication type:
- Article
Effect of Replacing Feldspar by Philippine Black Cinder on the Development of Low-Porosity Red Stoneware.
- Published in:
- Minerals (2075-163X), 2023, v. 13, n. 4, p. 505, doi. 10.3390/min13040505
- By:
- Publication type:
- Article
Mullite-Based Ceramics from Mining Waste: A Review.
- Published in:
- Minerals (2075-163X), 2021, v. 11, n. 3, p. 332, doi. 10.3390/min11030332
- By:
- Publication type:
- Article
Development of Ceramic Materials for the Manufacture of Bricks with Stone Cutting Sludge from Granite.
- Published in:
- Minerals (2075-163X), 2020, v. 10, n. 7, p. 621, doi. 10.3390/min10070621
- By:
- Publication type:
- Article
Investigating the Drying Process of Ceramic Sanitary Ware at Low Temperature.
- Published in:
- Energies (19961073), 2023, v. 16, n. 10, p. 4242, doi. 10.3390/en16104242
- By:
- Publication type:
- Article
Longevity of ceramic restoring materials in the confection of endocrowns restorations: an in vitro study on surface roughness and mechanical strength.
- Published in:
- RGO: Revista Gaúcha de Odontologia, 2023, v. 71, p. 1, doi. 10.1590/1981-86372023005020230003
- By:
- Publication type:
- Article
Electrically conductive ceramic composites prepared with printer toner as the conductive phase.
- Published in:
- Advances in Applied Ceramics: Structural, Functional & Bioceramics, 2017, v. 116, n. 3, p. 158, doi. 10.1080/17436753.2016.1278339
- By:
- Publication type:
- Article
Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion.
- Published in:
- Ceramica, 2021, v. 67, n. 382, p. 151, doi. 10.1590/0366-69132021673823095
- By:
- Publication type:
- Article
A review on additive manufacturing of ceramic materials based on extrusion processes of clay pastes.
- Published in:
- 2020
- By:
- Publication type:
- Literature Review
Effects of corundum in the development of structural, mechanical and tribological properties of raw materials for the manufacture of structural products.
- Published in:
- Ceramica, 2018, v. 64, n. 371, p. 352, doi. 10.1590/0366-69132018643712327
- By:
- Publication type:
- Article
Phases Obtained by Mechanoactivation in Ceramic Based on Calcium Phosphate Nanopowders with Ca/P = 1.25.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 460, doi. 10.1007/s10717-018-0016-7
- By:
- Publication type:
- Article
Clay Modifier Activation for Ceramic Brick by Ultrasonic Extrusion.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 450, doi. 10.1007/s10717-018-0014-9
- By:
- Publication type:
- Article
Hardness Control of Porous Ceramic Compositions in the System Abrasive Grain - Binder - Pores.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 444, doi. 10.1007/s10717-018-0013-x
- By:
- Publication type:
- Article
Elemental Iron Content as Control Marker in Sintering Aluminum Silicate Ceramic.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 411, doi. 10.1007/s10717-018-0006-9
- By:
- Publication type:
- Article
Piezoelectric Transformer Aided X-Ray Generation in Vacuum.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 404, doi. 10.1007/s10717-018-0004-y
- By:
- Publication type:
- Article
Study of the Effect of Promoters on Thermochemical Transformations of Zirconium Hydroxide.
- Published in:
- Glass & Ceramics, 2018, v. 74, n. 11/12, p. 399, doi. 10.1007/s10717-018-0003-z
- By:
- Publication type:
- Article
Rheological Characteristics of Slips in Making Heat-Resistant Lithium-Aluminum-Silicate Ceramic.
- Published in:
- Glass & Ceramics, 2017, v. 74, n. 7/8, p. 257, doi. 10.1007/s10717-017-9975-3
- By:
- Publication type:
- Article
Calculating minor constituents in synthetic corundum abrasives.
- Published in:
- Mineralia Slovaca, 2020, v. 52, n. 1, p. 57
- By:
- Publication type:
- Article
Hybrid Development of a Compact Antenna Based on a Novel Skin-Matched Ceramic Composite for Body Fat Measurement.
- Published in:
- Electronics (2079-9292), 2020, v. 9, n. 12, p. 2139, doi. 10.3390/electronics9122139
- By:
- Publication type:
- Article
Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning.
- Published in:
- Applied Physics A: Materials Science & Processing, 2017, v. 123, n. 1, p. 1, doi. 10.1007/s00339-016-0717-0
- By:
- Publication type:
- Article
More comprehensive 3D modeling of clay‐like material drying.
- Published in:
- AIChE Journal, 2018, v. 64, n. 4, p. 1469, doi. 10.1002/aic.16027
- By:
- Publication type:
- Article
Glauconite Sandstones of the Changi Deposit — Promising Raw Material for Obtaining Green and Brown Pigments.
- Published in:
- Glass & Ceramics, 2023, v. 80, n. 1/2, p. 70, doi. 10.1007/s10717-023-00558-w
- By:
- Publication type:
- Article
Novel method of ancient pottery analysis based on radioactive isotope ratios: a pilot study.
- Published in:
- Heritage Science, 2022, v. 10, n. 1, p. 1, doi. 10.1186/s40494-022-00745-y
- By:
- Publication type:
- Article
Novel method of ancient pottery analysis based on radioactive isotope ratios: a pilot study.
- Published in:
- Heritage Science, 2022, v. 10, n. 1, p. 1, doi. 10.1186/s40494-022-00745-y
- By:
- Publication type:
- Article
The Influence of Tool Composite's Structure During Process of Diamond Grinding of Ceramic Materials.
- Published in:
- Management & Production Engineering Review (MPER), 2014, v. 5, n. 4, p. 9, doi. 10.2478/mper-2014-0031
- By:
- Publication type:
- Article
Manufacturing of Complex Silicon–Carbon Structures: Exploring Si x C y Materials.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 10, p. 3475, doi. 10.3390/ma15103475
- By:
- Publication type:
- Article
EMERGING PROFESSIONALS.
- Published in:
- Advanced Materials & Processes, 2021, v. 179, n. 5, p. 66
- Publication type:
- Article
INTRODUCING NANOSCALE CERAMIC PARTICLES INTO METAL MATRICES.
- Published in:
- Advanced Materials & Processes, 2018, v. 176, n. 3, p. 25, doi. 10.31399/asm.amp.2018-03.p025
- By:
- Publication type:
- Article