Works matching Plastic powders
Results: 347
NEW TECHNOLOGIES FOR BUILDING COMPLEX PARTS FROM PLASTIC POWDERS ON LASER SINTERING SYSTEMS.
- Published in:
- Romanian Review Precision Mechanics, Optics & Mecatronics, 2015, n. 48, p. 213
- By:
- Publication type:
- Article
An Experimental Study on the Effect of Plastic Waste Powder on the Strength Parameters of Tuff and Bentonite Soils Treated with Cement.
- Published in:
- Engineering, Technology & Applied Science Research, 2023, v. 13, n. 2, p. 10322, doi. 10.48084/etasr.5580
- By:
- Publication type:
- Article
New Die-Compaction Equations for Powders as a Result of Known Equations Correction—Part 3: Modernization of Plasticity Equations for a Porous Body.
- Published in:
- Powders, 2024, v. 3, n. 3, p. 416, doi. 10.3390/powders3030023
- By:
- Publication type:
- Article
Soil Stabilization by Using Waste Plastic Powder.
- Published in:
- International Journal of Emerging Trends in Science & Technology, 2019, v. 5, n. 2, p. 4
- By:
- Publication type:
- Article
Influence of Recycled Cement Paste Powder on Early-Age Plastic Shrinkage and Cracking of Cement-Based Materials.
- Published in:
- Sustainability (2071-1050), 2023, v. 15, n. 13, p. 10661, doi. 10.3390/su151310661
- By:
- Publication type:
- Article
含硫偶联剂对木粉/橡胶-塑料三元复合材料 力学性能及耐热性能的影响.
- Published in:
- Acta Materiae Compositae Sinica, 2019, v. 36, n. 9, p. 2220, doi. 10.13801/j.cnki.fhclxb.20181213.001
- By:
- Publication type:
- Article
橡胶粉-废塑料复合改性沥青高低温性能研究.
- Published in:
- China Sciencepaper, 2023, v. 18, n. 12, p. 1334
- By:
- Publication type:
- Article
Production of Load Bearing Concrete Masonry Units (blocks) From Green Concrete Containing Plastic Waste and Nano Silica Sand Powder.
- Published in:
- Journal of Engineering (17264073), 2022, v. 28, n. 8, p. 54, doi. 10.31026/j.eng.2022.08.04
- By:
- Publication type:
- Article
Using Recycled Concrete Powder, Waste Glass Powder, and Plastic Powder to Improve the Mechanical Properties of Compacted Concrete: Cement Elimination Approach.
- Published in:
- Advances in Civil Engineering, 2022, p. 1, doi. 10.1155/2022/9481466
- By:
- Publication type:
- Article
PLA/杨木粉木塑复合材料的配方优化 与力学性能研究.
- Published in:
- Journal of Shaanxi University of Science & Technology, 2020, v. 38, n. 1, p. 124
- By:
- Publication type:
- Article
The impact of utilizing red brick powder and plastic pellets as fine particles on the compressive strength and absorption of water in paving blocks.
- Published in:
- Scientific Review: Engineering & Environmental Sciences / Przegląd Naukowy: Inżynieria i Kształtowanie Środowiska, 2024, v. 33, n. 4, p. 372, doi. 10.22630/srees.9917
- By:
- Publication type:
- Article
Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 19, p. 6579, doi. 10.1007/s10853-014-8258-4
- By:
- Publication type:
- Article
Porous plastic powder.
- Published in:
- Chemical Engineering, 2010, v. 117, n. 13, p. 14
- Publication type:
- Article
SYNTHESIS OF NANOCRYSTALLINE AND AMORPHOUS ALLOYS FROM ELEMENTARY POWDERS BY INTENSIVE PLASTIC DEFORMATION UNDER HIGH PRESSURE.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2010, v. 24, n. 6/7, p. 722, doi. 10.1142/S0217979210064344
- By:
- Publication type:
- Article
THE EFFECT OF PARTIAL REPLACEMENT OF CEMENT BY WASTE GREEN GLASS POWDER WITH WASTE PLASTIC AS COARSE AGGREGATE.
- Published in:
- i-Manager's Journal on Structural Engineering, 2022, v. 11, n. 2, p. 1, doi. 10.26634/jste.11.2.18834
- By:
- Publication type:
- Article
Hierarchically heterogeneous microstructure and mechanical behavior of the multi-materials prepared by powder severe plastic deformation.
- Published in:
- Materials Research Letters, 2023, v. 11, n. 11, p. 915, doi. 10.1080/21663831.2023.2258158
- By:
- Publication type:
- Article
50th anniversary.
- Published in:
- Melliand International / Melliand Textilberichte, 2007, v. 13, n. 3, p. 172
- Publication type:
- Article
Time factors and optimal process parameters for ultrasonic microchannel formation in thin sheet metals.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 89, n. 1-4, p. 255, doi. 10.1007/s00170-016-9073-7
- By:
- Publication type:
- Article
玻璃粉和生物炭对砂浆塑性收缩 及开裂行为的影响.
- Published in:
- Bulletin of the Chinese Ceramic Society, 2024, v. 43, n. 9, p. 3337
- By:
- Publication type:
- Article
Effect of the particle size and acid pretreatments on compatibility and properties of recycled HDPE plastic bottles filled with ground tyre powder.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 4, p. 1882, doi. 10.1002/app.29611
- By:
- Publication type:
- Article
Refractory High‐Entropy Alloys Produced from Elemental Powders by Severe Plastic Deformation.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 9, p. 1, doi. 10.1002/adem.202301949
- By:
- Publication type:
- Article
石灰岩粉尘石粉/PVC 石塑材料的制备及性能研究.
- Published in:
- Plastics Science & Technology / Suliao Ke-Ji, 2024, v. 52, n. 12, p. 38, doi. 10.15925/j.cnki.issn1005-3360.2024.12.007
- By:
- Publication type:
- Article
汽车塑料电镀装饰条注塑模具设计.
- Published in:
- China Plastics / Zhongguo Suliao, 2020, v. 34, n. 12, p. 88, doi. 10.19491/j.issn.1001-9278.2020.12.015
- By:
- Publication type:
- Article
Preparation and properties of wood processing residues/bamboo charcoal powder/PP wood-plastic composites materials.
- Published in:
- Journal of Functional Materials / Gongneng Cailiao, 2019, v. 50, n. 7, p. 07210, doi. 10.3969/j.issn.1001-9731.2019.07.038
- By:
- Publication type:
- Article
Esfoliante formulado com pó de café como alternativa ao uso de microesferas de plástico.
- Published in:
- InterfacEHS, 2020, v. 15, n. 1, p. 82
- By:
- Publication type:
- Article
POWDER COATINGS-BASED ORGANIC FILMS.
- Published in:
- Environmental Engineering & Management Journal (EEMJ), 2003, v. 2, n. 3, p. 217, doi. 10.30638/eemj.2003.021
- By:
- Publication type:
- Article
Degassing of Medical Powder Plastics in Fused Deposition 3D Printing †.
- Published in:
- Engineering Proceedings, 2023, v. 38, p. 69, doi. 10.3390/engproc2023038069
- By:
- Publication type:
- Article
High-temperature plastic deformation behaviour of powder metallurgy Ti6Al4V alloy prepared from HDH powder.
- Published in:
- Powder Metallurgy, 2021, v. 64, n. 4, p. 321, doi. 10.1080/00325899.2021.1873531
- By:
- Publication type:
- Article
PLASTIC DEFORMATION ON SINTERED STEELS BY POWDER IRON.
- Published in:
- Fiability & Durability / Fiabilitate si Durabilitate, 2012, p. 183
- By:
- Publication type:
- Article
Solid-Phase Preparation of Ultra-Fine PA6 Powder Through Pan-Milling.
- Published in:
- Polymer Engineering & Science, 2001, v. 41, n. 7, p. 1187, doi. 10.1002/pen.10820
- By:
- Publication type:
- Article
Renewable Resource-Based Composites of Acorn Powder and Polylactide Bio-Plastic: Preparation and Properties Evaluation.
- Published in:
- Journal of Polymers & the Environment, 2011, v. 19, n. 1, p. 301, doi. 10.1007/s10924-010-0280-2
- By:
- Publication type:
- Article
Potential application of bamboo powder in PBS bamboo plastic composites.
- Published in:
- Journal of King Saud University - Science, 2020, v. 32, n. 1, p. 1130, doi. 10.1016/j.jksus.2019.10.014
- By:
- Publication type:
- Article
CHINY.
- Published in:
- Polimery, 2014, v. 59, n. 3, p. 262
- Publication type:
- Article
Effects of mulching with Caragana powder and plastic film on soil water and maize yield.
- Published in:
- Transactions of the Chinese Society of Agricultural Engineering, 2015, v. 31, n. 2, p. 108, doi. 10.3969/j.issn.1002-6819.2015.02.016
- By:
- Publication type:
- Article
A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2017, v. 48, n. 4, p. 1864, doi. 10.1007/s11661-016-3907-7
- By:
- Publication type:
- Article
From the thin film dryer: Powder for plastics production.
- Published in:
- Chemical Engineering, 2020, v. 127, n. 9, p. 65
- Publication type:
- Article
Correction to: Optimization of Cold Spray Deposition of High-Density Polyethylene Powders.
- Published in:
- 2018
- By:
- Publication type:
- Correction Notice
Hybrid nanostructured Ag/ZnO decorated powder cellulose fillers for medical plastics with enhanced surface antibacterial activity.
- Published in:
- Journal of Materials Science: Materials in Medicine, 2014, v. 25, n. 11, p. 2501, doi. 10.1007/s10856-014-5274-5
- By:
- Publication type:
- Article
Effective Use of Waste Plastic As Sand in Metakaolin/Brick-Powder Geopolymer Concrete.
- Published in:
- Jordan Journal of Civil Engineering, 2023, v. 17, n. 3, p. 473, doi. 10.14525/JJCE.v17i3.09
- By:
- Publication type:
- Article
Plastic flow of saturated alumina powder compacts: Pair potential and strain rate.
- Published in:
- AIChE Journal, 1999, v. 45, n. 8, p. 1830, doi. 10.1002/aic.690450817
- By:
- Publication type:
- Article
Features of plastic flow of powder Al-40Sn alloy during extrusion.
- Published in:
- Russian Journal of NonFerrous Metals, 2011, v. 52, n. 6, p. 504, doi. 10.3103/S1067821211060137
- By:
- Publication type:
- Article
Development of a recycling solution for waste thermoset material: waste source study, comminution scheme and filler characterization.
- Published in:
- Journal of Material Cycles & Waste Management, 2018, v. 20, n. 2, p. 1320, doi. 10.1007/s10163-017-0698-x
- By:
- Publication type:
- Article
Eco-Innovative UHPC—Enhancing Sustainability, Workability, and Ductility with Recycled Glass Cullet Powder and Plastic Bottle Hybrid Fibers.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 2, p. 393, doi. 10.3390/ma17020393
- By:
- Publication type:
- Article
Optimization of 3D Printing Technology for Fabrication of Dental Crown Prototype Using Plastic Powder and Zirconia Materials.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 23, p. 8618, doi. 10.3390/ma15238618
- By:
- Publication type:
- Article
Aluminium Trihydrate-filled Poly(methyl methacrylate) (PMMA/ATH) Waste Powder Utilization in Wood-plastic Composite Boards Bonded by MUF Resin.
- Published in:
- BioResources, 2020, v. 15, n. 2, p. 3252, doi. 10.15376/biores.15.2.3252-3269
- By:
- Publication type:
- Article
تحلیل خستگی مخلوطهای آسفالتی حاوی پلیاتیلن ضایعاتی و پودر لاستیک
- Published in:
- Journal of Transportation Infrastructure Engineering, 2023, v. 9, n. 3, p. 1
- By:
- Publication type:
- Article
ASSESSMENT OF THE AIR-ENTRAINING EFFECT OF RUBBER POWDER AND ITS INFLUENCE ON THE FROST RESISTANCE OF CONCRETE.
- Published in:
- Romanian Journal of Materials / Revista Romana de Materiale, 2016, v. 46, n. 3, p. 327
- By:
- Publication type:
- Article
On the Influence from Pressing Agent (PEG) on the Elastic and Plastic Mechanical Behavior of Hard Metal Powder Compacts.
- Published in:
- Crystals (2073-4352), 2023, v. 13, n. 6, p. 926, doi. 10.3390/cryst13060926
- By:
- Publication type:
- Article
Developing a Sealing Material: Effect of Epoxy Modification on Specific Physical and Mechanical Properties.
- Published in:
- Materials (1996-1944), 2013, v. 6, n. 12, p. 5490, doi. 10.3390/ma6125490
- By:
- Publication type:
- Article
Controlled drug release of silicone-based adhesive-containing cross-linked siloxane powders as a reservoir.
- Published in:
- Journal of Applied Polymer Science, 2015, v. 132, n. 26, p. n/a, doi. 10.1002/app.42154
- By:
- Publication type:
- Article