Works matching IS 24614254 AND DT 2024

Results: 102

PETROLEUM COMPLEXES OF METALLOPORPHYRINS AND THEIR DIOXYGEN ADDUCTS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 13, doi. 10.21303/2461-4262.2024.003491

By:

Aghahuseynova, Minira;
Vazirova, Leyla

Publication type:

Article

ANALYSIS OF THE THERMAL PERFORMANCE OF THE LINING AND THE REASONS FOR ITS DESTRUCTION IN PETROLEUM COKE CALCINATION FURNACES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 125, doi. 10.21303/2461-4262.2024.003329

By:

Nikiforov, Aleksandr;
Prikhodko, Yevgeniy;
Kucherbayev, Murat;
Kinzhibekova, Akmaral;
Karmanov, Amangeldy;
Uakhit, Nauryzbay

Publication type:

Article

OPTIMIZED IMPACT RESISTANCE IN SEALED PLASTIC CUP LIDS THROUGH INTEGRATED FINITE ELEMENT ANALYSIS AND DROP TESTS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 136, doi. 10.21303/2461-4262.2024.003406

By:

Janlasad, Nadnalin;
Tangchaichit, Kiatfa

Publication type:

Article

PRODUCTION OF HIGH-QUALITY CASTING CORES FROM LIGNIN-BASED BINDERS USING BLOW-OUT METHOD.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 113, doi. 10.21303/2461-4262.2024.003446

By:

Al-Saraireh, Falah Mustafa

Publication type:

Article

DEVELOPMENT OF A PROCESS MODEL FOR DETERMINING THE COMPOSITION AND ENERGY CHARACTERISTICS OF A PYROTECHNIC MIXTURE USING THE LIBRARY METHOD.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 99, doi. 10.21303/2461-4262.2024.003453

By:

Brunetkin, Olexander;
Maksymov, Maksym;
Dobrynin, Yevhenii;
Demydenko, Volodymyr;
Sidelnykov, Oleksandr

Publication type:

Article

MEPSI (MUTRISS ENHANCED PREFERENCE SELECTION INDEX): A NOVEL METHOD FOR RANKING ALTERNATIVES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 169, doi. 10.21303/2461-4262.2024.003408

By:

Tran Van Dua;
Do Duc Trung

Publication type:

Article

THE BULK MODULUS OF FULLERENE C20 IN THE CASE OF NONLINEAR VOLUMETRIC DEFORMATION.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 162, doi. 10.21303/2461-4262.2024.003369

By:

Nguyen Van Thang;
Bui Huy Kien

Publication type:

Article

GREEN NANOCOMPOSITE OF SILICA-SUPPORTED CaO: SYNTHESIS BY SOL-GEL METHOD AND CHARACTERIZATION.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 151, doi. 10.21303/2461-4262.2024.003407

By:

Simpen, I. Nengah;
Suprapta Winaya, I. Nyoman;
Suarsana, I. Ketut;
Gede Sugita, I. Ketut

Publication type:

Article

INVESTIGATION OF PANI/ZnO NANOCOMPOSITE FOR ALCOHOL VAPOR SENSOR.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 142, doi. 10.21303/2461-4262.2024.003364

By:

Putri, Nugrahani Primary;
Komariyah, Ana Yuli;
Prasya, Isaac Salman;
Fitriana, Fitriana

Publication type:

Article

ANALYSIS OF BIG SAFETY ATTRIBUTES: FROM CRITICAL TECHNICAL SYSTEMS TO INDIVIDUALS AND COMMUNITIES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 129, doi. 10.21303/2461-4262.2024.003565

By:

Yastrebenetsky, Michael;
Kharchenko, Vyacheslav

Publication type:

Article

IMPACT OF CUTTING FLUID VELOCITY AND FLOW RATE ON WEAR AND SURFACE ROUGHNESS IN TURNING OPERATIONS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 119, doi. 10.21303/2461-4262.2024.003368

By:

Mustafa Al-Saraireh, Falah

Publication type:

Article

CONSTRUCTION OF A LOGICAL-PROBABILISTIC MODEL OF CASTING QUALITY FORMATION FOR MANAGING TECHNOLOGICAL OPERATIONS IN FOUNDRY PRODUCTION.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 104, doi. 10.21303/2461-4262.2024.003518

By:

Demin, Dmitriy;
Frolova, Liliia

Publication type:

Article

DRYING OF ANDROGRAPHIS PANICULATA WITH HOT AIR CONTROLLED WITH ARTIFICIAL INTELLIGENCE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 93, doi. 10.21303/2461-4262.2024.003572

By:

Wichai Nramat;
Wasakorn Traiphat;
Phuachat Sukruan;
Prachum Utaprom;
Luedate Phatedoung;
Pitichon Piamboriboon;
Sutep Nramat

Publication type:

Article

COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF AIRFLOW PATTERNS AROUND ROTATING CYLINDERS IN THE DRAFTING SYSTEM OF A VORTEX SPINNING MACHINE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 81, doi. 10.21303/2461-4262.2024.003397

By:

Long Phi Nguyen;
Anh Phuoc Le;
Theu Thi Luong;
Huy Quang Tran;
Nhan Thi Tran;
Bac Thi Viet Phung

Publication type:

Article

STUDY OF THE IMPACT OF BIOPOLYMER AND GEOSYNTHETICS REINFORCEMENT ON SOIL STRENGTHENING.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 70, doi. 10.21303/2461-4262.2024.003472

By:

Tulebekova, Assel;
Kusbergenova, Zhanar;
Dosmukhambetova, Balganym;
Abilmazhenov, Talgat;
Zhumadilov, Iliyas

Publication type:

Article

ANALYSIS AND SELECTION OF SLURRY COMPOSITION, RESISTANT TO DYNAMIC LOADS, IN ORDER TO IMPROVE THE QUALITY OF FASTENING THE NEAR WELLBORE ZONE IN UNSTABLE FORMATIONS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 63, doi. 10.21303/2461-4262.2024.003338

By:

Novruzova, Sudaba;
Aliyev, Inglab;
Ahmad, Fariz

Publication type:

Article

STUDY ON THE USE OF COOLING WATER AS INPUT WATER TO IMPROVE DOUBLE SLOPE SOLAR STILL PERFORMANCE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 50, doi. 10.21303/2461-4262.2024.003334

By:

Ismail, Nova Risdiyanto;
Suwandono, Purbo;
Hermawan, Dadang;
Anggraeni, Frida Dwi

Publication type:

Article

EFFECTS ANALYSIS OF HIGHER FLEXURAL ADDITIVES TO INCREASE CRACK RESISTANCE IN RIGID PAVEMENTS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 42, doi. 10.21303/2461-4262.2024.003479

By:

Dewanto, Dewanto;
Djakfar, Ludfi;
Wisnumurti, Wisnumurti;
Wicaksono, Achmad

Publication type:

Article

STUDY AND OPTIMIZATION OF THE FACTORS AFFECTING THE CRUDE OIL DISTILLATION PROCESS USING ASPEN HYSYS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 31, doi. 10.21303/2461-4262.2024.003311

By:

Saud, Iltifat Hameed;
Abdullah, Abdulrazzaq Saeed;
Al-Asadi, Akram A.;
Al Janabi, Basma

Publication type:

Article

DEVELOPMENT OF THE TECHNOLOGY FOR PRODUCING ISOPROPYL ALCOHOL BY THE SULFURIC ACID METHOD.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 23, doi. 10.21303/2461-4262.2024.003355

By:

Huseynova, Matanat;
Bagirova, Narqiz;
Mustafayeva, Rena

Publication type:

Article

ANALYSIS OF THREE-DIMENSIONAL STANDING WAVES IN A TWO-LAYER FLUID.

Published in:

EUREKA: Physics & Engineering, 2024, n. 6, p. 3, doi. 10.21303/2461-4262.2024.003366

By:

Hurtovyi, Yurii;
Yelkin, Valentin;
Halushko, Oleksandr

Publication type:

Article

ANALYSIS OF AN ENHANCED RANDOM FOREST ALGORITHM FOR IDENTIFYING ENCRYPTED NETWORK TRAFFIC.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 201, doi. 10.21303/2461-4262.2024.003372

By:

Xiaoqing Yang;
Angkawisittpan, Niwat;
Xinyue Feng

Publication type:

Article

OPTIMIZING STAINLESS STEEL TENSILE STRENGTH ANALYSIS: THROUGH DATA EXPLORATION AND MACHINE LEARNING DESIGN WITH STREAMLIT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 73, doi. 10.21303/2461-4262.2024.003296

By:

Leni, Desmarita;
Karudin, Arwizet;
Abbas, Muhammad Rabiu;
Sharma, Jai Kumar;
Adriansyah, Adriansyah

Publication type:

Article

DEVELOPMENT OF A METHODOLOGY FOR CREATING A WEBSITE FOR ONLINE HEALTHCARE SERVICES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 183, doi. 10.21303/2461-4262.2024.003440

By:

Hrabovskyi, Yevhen;
Bondarenko, Dmytro;
Starkova, Olha

Publication type:

Article

PREDICTING AND MODELING THE EFFECTS OF TURBINES NOISE ON OPERATOR'S MENTAL TASK PERFORMANCE IN AL-DORA POWER PLANT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 173, doi. 10.21303/2461-4262.2024.003390

By:

Mosa, Ali I.;
Al-Sadawi, Laith A.;
Attia, Osam H.;
Adam, Nor Mariah

Publication type:

Article

IDENTIFICATION OF RISK FACTORS THAT ARE DOMINANT TO THE VULNERABILITY OF BUILDINGS DUE TO EARTHQUAKES AND THEIR MITIGATION BY THE IMPORTANCE INDEX METHOD.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 163, doi. 10.21303/2461-4262.2024.003462

By:

Yusuf, Moyos Muhammad;
Wibowo, Ari;
Pujiraharjo, Alwafi

Publication type:

Article

ESTIMATION OF RELIABILITY AND SAFETY LEVEL FOR HAZARDOUS PRODUCTION FACILITIES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 152, doi. 10.21303/2461-4262.2024.003451

By:

Bagir-zadeh, Mamed;
Dyshin, Oleg;
Habibov, Ibrahim

Publication type:

Article

OPTIMIZING EDM FOR TITANIUM ALLOYS: AN IN-DEPTH COMPARISON OF FIVE MCDM TECHNIQUES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 89, doi. 10.21303/2461-4262.2024.003283

By:

Van-Canh Nguyen;
Dinh-Toan Vu;
Quoc-Hung Tran;
Van Quang Kieu;
Trong Mai Nguyen

Publication type:

Article

STUDY ON TERRAIN RESPONSE OF THE MILITARY MOBILE REPAIR VEHICLE TOWING POWER GENERATOR TRAILER BEFORE AND AFTER IMPROVEMENT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 3, doi. 10.21303/2461-4262.2024.003384

By:

Quyen Manh Dao;
Thang Duc Tran;
Van Le, Duong

Publication type:

Article

THE POTENTIAL OF CATALYST BASED ON PALM LEAVES IN BIODIESEL PRODUCTION AS PART OF PALM OIL LIFE CYCLE ASSESMENT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 40, doi. 10.21303/2461-4262.2024.003433

By:

Manurung, Renita;
Tambun, Rondang;
Syahputri Zuhri, Ruri Rizki;
Harahap, Hamidah;
Agustan Siregar, Alwi Gery

Publication type:

Article

PHYSICAL AND MECHANICAL PROPERTIES OF ADOBE BRICKS REINFORCED BY NATURAL ADDITIVES, A CASE STUDY OF ALFALFA FIBERS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 144, doi. 10.21303/2461-4262.2024.003426

By:

Azalam, Youness;
Alioui, Abdelmounaim;
Al armouzi, Naoual;
Benfars, Mohammed;
Mabrouki, Mustapha;
Bendada, El Maati

Publication type:

Article

INVESTIGATION ON THE INFLUENCE OF WASTE-BASED FILLERS ON THE MECHANICAL AND THERMAL CHARACTERISTICS OF RIGID POLYURETHANE FOAMS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 173, doi. 10.21303/2461-4262.2024.003419

By:

Muhsen, Muhsen Chelab;
Mohammed, Ahmed J.;
AL-Malki, Ziyad T.;
Thbayh, Dalal K.

Publication type:

Article

COLORIMETRY METHOD FOR NITROCELLULOSE POWDER CHARGE MONITORING SYSTEM.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 66, doi. 10.21303/2461-4262.2024.003431

By:

Anipko, Oleg;
Baulin, Dmitro;
Horielyshev, Stanislav;
Boikov, Igor;
Medvid, Mykhailo;
Plaksin, Andrii;
Ivanchenko, Artem;
Titov, Ihor;
Piskunov, Stanislav

Publication type:

Article

DESIGN OF A PLANAR INTERDIGITAL CAPACITOR FOR PRESSURE MEASUREMENT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 64, doi. 10.21303/2461-4262.2024.003400

By:

Kasemsin, Wassana;
Boonkirdram, Sarawoot

Publication type:

Article

DEVELOPMENT AND APPLICATION OF A GENERALIZED METHOD OF DETERMINATION THE ROOTS OF THE CHARACTERISTIC EQUATION A SYSTEM TUNED TO THE TECHNICAL OPTIMUM.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 55, doi. 10.21303/2461-4262.2024.003454

By:

Safarova, Aygun;
Neymatov, Vasif;
Damirova, Javida

Publication type:

Article

NONLINEAR MODELS OF THE SOIL BASE FOR SLAB CULCULATIONS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 41, doi. 10.21303/2461-4262.2024.003484

By:

Dostanova, Saule;
Kalpenova, Zaure;
Shayakhmetov, Saulet;
Kasymova, Gulsum;
Tokpanova, Kamilya

Publication type:

Article

IMPLEMENTATION OF COMPOSITE PAPER-BASED COATING FOR REDUCING ROOM TEMPERATURE UNDER GALVALUME ROOFING.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 24, doi. 10.21303/2461-4262.2024.003286

By:

Bintarto, Redi;
Purnowidodo, Anindito;
Darmadi, Djarot B.;
Widodo, Teguh Dwi

Publication type:

Article

COMPARISON BETWEEN MODULUS OF TOUGHNESS AND COMPRESSIVE STRENGTH OF BAMBOO FIBER REINFORCED MORTAR UNDER IMPACT LOADING.

Published in:

EUREKA: Physics & Engineering, 2024, n. 5, p. 15, doi. 10.21303/2461-4262.2024.003282

By:

Aditama, Vega;
Dewi, Murni;
Wibowo, Ari;
Wijaya, Ming Narto

Publication type:

Article

A STUDY OF THE DYNAMIC EVOLUTION OF SPHERICAL GRAVITATING SYSTEMS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 3, doi. 10.21303/2461-4262.2024.003416

By:

Kutlimuratov, Sardor;
Otojanova, Nilufar;
Tadjibaev, Ikram;
Tillaboev, Komiljon

Publication type:

Article

INTERPRETATION OF GEORADAR DATA BASED ON MACHINE LEARNING TECHNOLOGIES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 193, doi. 10.21303/2461-4262.2024.003289

By:

Omarkhanova, Dinara;
Oralbekova, Zhanar

Publication type:

Article

EVALUATION OF CNC LATHE MACHINE WITH FUZZY LINGUISTIC MCDM METHODS.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 113, doi. 10.21303/2461-4262.2024.003360

By:

Quy-Tho Nhu;
Dinh-Hieu Phan;
Ngoc-Tien Tran

Publication type:

Article

IDENTIFYING THE INFLUENCE OF AIRBAG STRUCTURE ON DRIVER INJURY DURING A CRASH USING A DUMMY MODEL.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 52, doi. 10.21303/2461-4262.2024.003313

By:

Minh Tien Nguyen;
Ngoc Anh Nguyen;
Quan Hai Vu;
Dat Trong Hoang

Publication type:

Article

SYNTHESIS OF LiCo1-x NixO2 NANOMATERIAL BY HYDROTHERMAL METHOD AS CATHODE FOR LITHIUM ION BATTERY.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 160, doi. 10.21303/2461-4262.2024.003310

By:

Homad, Hudaa;
Ali, Noor;
Al-Jubouri, Omar;
Al-Timimi, Muhammad;
Abbas, Bahaa

Publication type:

Article

INVESTIGATION ON THE EFFECT OF OPERATION OF SOLAR DRYER TECHNOLOGY ACCORDING TO THE DRYING CHARACTERISTIC OF DRIED PRODUCT.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 90, doi. 10.21303/2461-4262.2024.003291

By:

Rahman, Reza Abdu;
Sulistyo, Sulistyo;
Kartono Tony Suryo Utomo, Mohamad Said;
Gunawan, Kaprian Rizki;
Ismail, Ismail

Publication type:

Article

STUDYING THE INFLUENCE OF ENGINE SPEED ON THE ENTIRE PROCESS OF SPAN-LOWERING OF THE HEAVY MECHANIZED BRIDGE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 79, doi. 10.21303/2461-4262.2024.003365

By:

Duong Van Le;
Thang Duc Tran;
Quyen Manh Dao;
Dat Van Chu

Publication type:

Article

UTILIZATION OF COCONUT SHELL ACTIVATED CARBON TO GENERATE ELECTRICAL ENERGY USING SODIUM CHLORIDE ELECTROLYTE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 28, doi. 10.21303/2461-4262.2024.003281

By:

Gede Gunawan Tista, Si Putu;
Ngurah Nitya Santhiarsa, I Gusti;
Murti, Made Ricki;
Sunu, Putu Wijaya;
Wardoyo, Wardoyo

Publication type:

Article

ANALYSIS OF LOAD AND CONTACT MECHANIC ON THE COMPOSITE STRUCTURAL: CASE STUDY ON GFRP COMPOSITE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 133, doi. 10.21303/2461-4262.2024.003269

By:

Mujiyono;
Perdana, Helmi Kusuma;
Nurhadiyanto, Didik;
Lutviana Saputri, Virda Hersy;
Hassan, Shukur Abu

Publication type:

Article

EFFECT OF CONTACT BLAST LOADING ON THE PLASTIC DEFORMATION FORMING ABILITY OF LARGE STEEL PIPES.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 124, doi. 10.21303/2461-4262.2024.003262

By:

Quang Duc Vu

Publication type:

Article

THERMAL PRETREATMENT OF SWINE WASTE TO IMPROVE BIODEGRADABILITY IN THE ANAEROBIC DIGESTION PROCESS. EFFECT ON THE PHYSICOCHEMICAL CHARACTERISTICS OF THE SUBSTRATE.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 13, doi. 10.21303/2461-4262.2024.003234

By:

Chamorro, Marley Vanegas;
Hernández Echeverría, Arwill Alberto;
Valdivieso Rodado, Karol Julieth;
Morris, Felipe Romani;
Cely Bautista, María Mercedes;
Gutiérrez, Ricardo Stand;
Quintero, Miguel Celis

Publication type:

Article

CLASSIFICATION OF FOOD ITEMS IN TRASH THROUGH IMAGES USING A HYBRID DEEP LEARNING SYSTEM.

Published in:

EUREKA: Physics & Engineering, 2024, n. 4, p. 184, doi. 10.21303/2461-4262.2024.003227

By:

Abdulrahman, Asma Abdulelah;
Wazi, Mayada Taki;
Sabr, Marwah Hadi;
Tahir, Fouad Shaker;
Khlaponin, Yurii

Publication type:

Article