Found: 5000
Select item for more details and to access through your institution.
Surface roughness and microhardness evaluation of composite resin restorations subjected to three different polishing systems immediately and after 24 h: An in vitro study.
- Published in:
- Journal of Conservative Dentistry & Endodontics, 2023, v. 26, n. 6, p. 639, doi. 10.4103/JCDE.JCDE_106_23
- By:
- Publication type:
- Article
Evaluation of gingival porcelains: Color change and surface properties.
- Published in:
- Journal of Prosthodontics, 2024, v. 33, n. 9, p. 883, doi. 10.1111/jopr.13779
- By:
- Publication type:
- Article
Study on the microstructure and mechanical properties of annealed TC4/6061/AZ31B/6061/TC4 symmetrical clad sheets.
- Published in:
- Metallic Materials / Kovové Materiály, 2024, v. 62, n. 4, p. 253, doi. 10.31577/km.2024.4.253
- By:
- Publication type:
- Article
Modeling roughness surface Rp of 3D selective laser melting metal materials.
- Published in:
- Metallic Materials / Kovové Materiály, 2024, v. 62, n. 4, p. 235, doi. 10.31577/km.2024.4.235
- By:
- Publication type:
- Article
Evaluation of residual stress, surface hardness, roughness, and wear resistance of AZ31 in SMAT process using Taguchi analysis.
- Published in:
- Metallic Materials / Kovové Materiály, 2024, v. 62, n. 4, p. 197, doi. 10.31577/km.2024.4.197
- By:
- Publication type:
- Article
Comparison of the ablative performance of silicone rubber‐based composites by analyzing a large number of samples.
- Published in:
- Journal of Applied Polymer Science, 2025, v. 142, n. 3, p. 1, doi. 10.1002/app.56384
- By:
- Publication type:
- Article
Effects of atmospheric pressure plasma treatment and its aging behaviors on interfacial strength of PI/PEEK composite film.
- Published in:
- Journal of Applied Polymer Science, 2025, v. 142, n. 3, p. 1, doi. 10.1002/app.56369
- By:
- Publication type:
- Article
THE MATHEMATICAL MODELS OF ELECTROCHEMICAL GRINDING FOR THE PRECISION PRODUCTION.
- Published in:
- MM Science Journal, 2024, p. 7995, doi. 10.17973/MMSJ.2024_12_2024100
- By:
- Publication type:
- Article
PARAMETRIC OPTIMIZATION OF ABRASIVE WATER JET MACHINING PROCESS USING COPRAS AND VIKOR METHODS.
- Published in:
- MM Science Journal, 2024, p. 7930, doi. 10.17973/MMSJ.2024_12_2024128
- By:
- Publication type:
- Article
An investigation on the wear properties of the photocurable components produced by additive manufacturing for dentistry applications: Combined influences of UV exposure time, building direction, and sliding loads.
- Published in:
- Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5940, doi. 10.1002/pen.26960
- By:
- Publication type:
- Article
Investigation of microhardness, surface roughness, and color change of preheated composite resins.
- Published in:
- International Dental Research, 2024, v. 14, n. 1, p. 42, doi. 10.5577/intdentres.523
- By:
- Publication type:
- Article
Evaluation of Clear Aligner Attachments Bonded to Lithium Disilicate Ceramic Prepared with Different Surface Roughening Methods: An In Vitro Study.
- Published in:
- Journal of Contemporary Dental Practice, 2024, v. 27, n. 8, p. 766, doi. 10.5005/jp-journals-10024-3740
- By:
- Publication type:
- Article
CAN THE INCREASED FEED BE BENEFICIAL ON THE SURFACE QUALITY IN TANGENTIAL TURNING?
- Published in:
- Multidiszciplináris Tudományok, 2024, v. 14, n. 4, p. 66, doi. 10.35925/j.multi.2024.4.6
- By:
- Publication type:
- Article
WORKPIECE PROFILING USING LASER TRIANGULATION DISPLACEMENT SENSORS.
- Published in:
- DAAAM International Scientific Book, 2024, p. 181, doi. 10.2507/daaam.scibook.2024.15
- By:
- Publication type:
- Article
Evaluation of biocompatibility and osseointegration of multi‐component TiAl6V4 titanium alloy implants.
- Published in:
- Journal of Orthopaedic Research, 2025, v. 43, n. 1, p. 139, doi. 10.1002/jor.25974
- By:
- Publication type:
- Article
Improving tribological efficiency of isopropyl palmitate oil with cellulose nanocrystals: a sustainable approach for high-performance lubricants.
- Published in:
- Cellulose, 2024, v. 31, n. 18, p. 10879, doi. 10.1007/s10570-024-06181-4
- By:
- Publication type:
- Article
ANALYSIS OF BIG SAFETY ATTRIBUTES: FROM CRITICAL TECHNICAL SYSTEMS TO INDIVIDUALS AND COMMUNITIES.
- Published in:
- EUREKA: Physics & Engineering, 2024, n. 6, p. 129, doi. 10.21303/2461-4262.2024.003565
- By:
- Publication type:
- Article
IMPACT OF CUTTING FLUID VELOCITY AND FLOW RATE ON WEAR AND SURFACE ROUGHNESS IN TURNING OPERATIONS.
- Published in:
- EUREKA: Physics & Engineering, 2024, n. 6, p. 119, doi. 10.21303/2461-4262.2024.003368
- By:
- Publication type:
- Article
Effect of substrate fabric characteristics on the peel strength of 3D-printed composite fabrics.
- Published in:
- Fashion & Textiles (2198-0802), 2024, v. 11, n. 1, p. 1, doi. 10.1186/s40691-024-00405-8
- By:
- Publication type:
- Article
Low‐Threshold Amplified Spontaneous Emission of Dion–Jacobson‐Phase Perovskite Films Achieved by Tuning Diamine Cation Size.
- Published in:
- Physica Status Solidi - Rapid Research Letters, 2024, v. 18, n. 12, p. 1, doi. 10.1002/pssr.202400080
- By:
- Publication type:
- Article
The Effects of Chairside Adjustment on the Surface Roughness of Contemporary Dental Ceramics: A Narrative Review.
- Published in:
- Journal of the California Dental Association, 2024, v. 52, n. 1, p. 1, doi. 10.1080/19424396.2024.2320311
- By:
- Publication type:
- Article
C.E. Credit Practice Quiz for "The Effects of Chairside Adjustment on the Surface Roughness of Contemporary Dental Ceramics: A Narrative Review".
- Published in:
- Journal of the California Dental Association, 2024, v. 52, n. 1, p. 1, doi. 10.1080/19424396.2024.2399480
- By:
- Publication type:
- Article
Enhancing Photoswitchable Wetting Properties of Hydrophobic Porous Spiropyran Copolymer Surfaces Through Surface Roughness Engineering (Adv. Mater. Interfaces 34/2024).
- Published in:
- Advanced Materials Interfaces, 2024, v. 11, n. 34, p. 1, doi. 10.1002/admi.202470084
- By:
- Publication type:
- Article
Evaluation of Surface Roughness and Microhardness of Bulk-fill and Nanohybrid Composite after Exposure to Different Beverages at Various Time Intervals – An In vitro Study.
- Published in:
- Annals of African Medicine, 2024, v. 23, n. 3, p. 466, doi. 10.4103/aam.aam_157_23
- By:
- Publication type:
- Article
Plasma Functionalization for Enhanced Natural Dye Affinity on Bioplastics: A Novel Approach.
- Published in:
- Plasma Processes & Polymers, 2024, v. 21, n. 12, p. 1, doi. 10.1002/ppap.202400184
- By:
- Publication type:
- Article
Study on Dynamic Responses of Unit Slab Track Considering the Influence of Cement Asphalt Mortar Rough Surface.
- Published in:
- Advances in Civil Engineering, 2024, v. 2024, p. 1, doi. 10.1155/2024/9972652
- By:
- Publication type:
- Article
Material Removal Uniformity in Water Dissolution Ultraprecision Continuous Polishing for Large-Size Water-Soluble Crystals.
- Published in:
- Chinese Journal of Mechanical Engineering, 2024, v. 37, n. 1, p. 1, doi. 10.1186/s10033-024-01127-0
- By:
- Publication type:
- Article
2.5D C<sub>f</sub> /SiC复合材料微尺度磨削试验研究.
- Published in:
- Journal of Northeastern University (Natural Science), 2024, v. 45, n. 8, p. 1143, doi. 10.12068/j.issn.1005-3026.2024.08.010
- By:
- Publication type:
- Article
Terrain Analysis According to Multiscale Surface Roughness in the Taklimakan Desert †.
- Published in:
- Land (2012), 2024, v. 13, n. 11, p. 1843, doi. 10.3390/land13111843
- By:
- Publication type:
- Article
Investigation of Critical Aspects of Roughness Assessment for Airfield Pavements.
- Published in:
- Infrastructures, 2024, v. 9, n. 11, p. 203, doi. 10.3390/infrastructures9110203
- By:
- Publication type:
- Article
Influence of Cold-Rolling Processes on the Dimensional Accuracy and Roughness of Small-Diameter Thick-Walled Seamless Tubes.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 11, p. 1297, doi. 10.3390/met14111297
- By:
- Publication type:
- Article
Influence of Tool Wear and Workpiece Diameter on Surface Quality and Prediction of Surface Roughness in Turning.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 11, p. 1205, doi. 10.3390/met14111205
- By:
- Publication type:
- Article
Effect of High-Speed Friction Treatment with Fluorine Components on the Changes in Spruce Surface Properties.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 11, p. 3513, doi. 10.3390/buildings14113513
- By:
- Publication type:
- Article
Multi-Objective Optimization Study on Production of AlSi10Mg Alloy by Laser Powder Bed Fusion.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 22, p. 10584, doi. 10.3390/app142210584
- By:
- Publication type:
- Article
Increasing the Wear Resistance of CrWMn Tool Steel Surfaces by Plasma Electrolytic Nitriding and Polishing.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 22, p. 10488, doi. 10.3390/app142210488
- By:
- Publication type:
- Article
Measurement Model of Full-Width Roughness Considering Longitudinal Profile Weighting.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 22, p. 10213, doi. 10.3390/app142210213
- By:
- Publication type:
- Article
Neutrophils Respond Selectively to Physical Cues: Roughness Modulates Its Granule Release, and NETosis.
- Published in:
- Journal of Functional Biomaterials, 2024, v. 15, n. 11, p. 342, doi. 10.3390/jfb15110342
- By:
- Publication type:
- Article
Bioactive Compounds Enhance the Biocompatibility and the Physical Properties of a Glass Ionomer Cement.
- Published in:
- Journal of Functional Biomaterials, 2024, v. 15, n. 11, p. 332, doi. 10.3390/jfb15110332
- By:
- Publication type:
- Article
Effects of Finishing on Surface Roughness of Four Different Glass-Ionomer Cements and One Alkasite: In Vitro Investigation over Time Using Aging Simulation.
- Published in:
- Journal of Functional Biomaterials, 2024, v. 15, n. 11, p. 325, doi. 10.3390/jfb15110325
- By:
- Publication type:
- Article
Effect of Molybdenum Concentration and Deposition Temperature on the Structure and Tribological Properties of the Diamond-like Carbon Films.
- Published in:
- Crystals (2073-4352), 2024, v. 14, n. 11, p. 962, doi. 10.3390/cryst14110962
- By:
- Publication type:
- Article
Polycrystalline Diamond Film Growth on Gallium Nitride with Low Boundary Thermal Resistance.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1457, doi. 10.3390/coatings14111457
- By:
- Publication type:
- Article
Ammonia Plasma Surface Treatment for Enhanced Cu–Cu Bonding Reliability for Advanced Packaging Interconnection.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1449, doi. 10.3390/coatings14111449
- By:
- Publication type:
- Article
On the Effect of Randomly Oriented Grain Growth on the Structure of Aluminum Thin Films Deposited via Magnetron Sputtering.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1441, doi. 10.3390/coatings14111441
- By:
- Publication type:
- Article
The Effect of In Situ Laser-Assisted Plasma Spraying on the Plasma Etching Resistance of Yttrium Oxide Coating.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1427, doi. 10.3390/coatings14111427
- By:
- Publication type:
- Article
Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1385, doi. 10.3390/coatings14111385
- By:
- Publication type:
- Article
The Weathering of the Beech and Spruce Wood Impregnated with Pigmented Linseed Oil.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 11, p. 1374, doi. 10.3390/coatings14111374
- By:
- Publication type:
- Article
Impact of Target Surface Building Direction on the Heat Transfer Characteristics of Additive Manufactured Impingement Systems.
- Published in:
- Aerospace (MDPI Publishing), 2024, v. 11, n. 11, p. 944, doi. 10.3390/aerospace11110944
- By:
- Publication type:
- Article
Analysis of Influence of Coating Type on Friction Behaviour and Surface Topography of DC04/1.0338 Steel Sheet in Bending Under Tension Friction Test.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 22, p. 5650, doi. 10.3390/ma17225650
- By:
- Publication type:
- Article
Identification of Deformation Effects While Shaping the Material Surface Relief Due to Burnishing Treatment.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 22, p. 5635, doi. 10.3390/ma17225635
- By:
- Publication type:
- Article
Analysis of Mechanical Properties and Printing Orientation Influence of Composite Resin for 3D Printing Compared to Conventional Resin.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 22, p. 5626, doi. 10.3390/ma17225626
- By:
- Publication type:
- Article