QUALITATIVE ENHANCEMENT IN MACHINING EFFICIENCY OF SNCM8 ALLOY THROUGH HYBRID ANN-TAGUCHI OPTIMIZATION APPROACH.
- Published in:
- Applied Engineering Letters, 2025, v. 10, n. 1, p. 48, doi. 10.46793/aeletters.2025.10.1.5
- By:
- Publication type:
- Article
Works matching 2466-4677
Results: 45
1
2
ENERGY MANAGEMENT POLICY SELECTION IN SMART GRIDS: A CRITIC-CoCoSo METHOD WITH Lq* q-rung ORTHOPAIR MULTI-FUZZY SOFT SETS.
- Published in:
- Applied Engineering Letters, 2025, v. 10, n. 1, p. 35, doi. 10.46793/aeletters.2025.10.1.4
- By:
- Publication type:
- Article
3
TEMPERATURE AND PLASTIC STRAIN EVALUATION DURING FRICTION STIR REPAIR OF CORROSION DEFECTS IN Al2024.
- Published in:
- Applied Engineering Letters, 2025, v. 10, n. 1, p. 25, doi. 10.46793/aeletters.2025.10.1.3
- By:
- Publication type:
- Article
4
EFFECTS OF ADJUSTABLE AND CONTROL PARAMETERS ON PERFORMANCE CHARACTERISTICS OF MULTI-CONTROLLED VARIABLE DISPLACEMENT PUMP.
- Published in:
- Applied Engineering Letters, 2025, v. 10, n. 1, p. 14, doi. 10.46793/aeletters.2025.10.1.2
- By:
- Publication type:
- Article
5
HEAT TRANSFER AND FRICTION FACTOR OF FLAT PLATE SOLAR COLLECTOR WITH Al<sub>2</sub>O<sub>3</sub>-CuO/WATER HYBRID NANOFLUIDS: EXPERIMENTAL AND ANN PREDICTIONS.
- Published in:
- Applied Engineering Letters, 2025, v. 10, n. 1, p. 1, doi. 10.46793/aeletters.2025.10.1.1
- By:
- Publication type:
- Article
6
OPTIMIZING PROCESS PARAMETERS FOR ENHANCING MECHANICAL PROPERTIES OF AA6061 COMPOSITES REINFORCED WITH WALNUT SHELL ASH AND SILICON CARBIDE.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 4, p. 232, doi. 10.46793/aeletters.2024.9.4.5
- By:
- Publication type:
- Article
7
INVESTIGATION OF THE MECHANICAL BEHAVIOR OF EPOXY COMPOSITES FILLED WITH BAGASSE ASH AND PISTACHIO SHELL ASH: A COMPARATIVE STUDY.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 4, p. 215, doi. 10.46793/aeletters.2024.9.4.4
- By:
- Publication type:
- Article
8
APPLICATION OF PROBABILITY THEORY IN MACHINE SELECTION.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 4, p. 203, doi. 10.46793/aeletters.2024.9.4.3
- By:
- Publication type:
- Article
9
DEVELOPMENT OF AN INNOVATIVE COOLING SYSTEM AT THE COUNTERSHAFT ASSEMBLY STATION.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 4, p. 195, doi. 10.46793/aeletters.2024.9.4.2
- By:
- Publication type:
- Article
10
INFLUENCE OF THE SURFACE ROUGHNESS, LUBRICATION AND GRINDING ON TRIBOLOGICAL PROPERTIES OF THE C35 STEEL SHOT-PEENED SURFACES.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 4, p. 185, doi. 10.46793/aeletters.2024.9.4.1
- By:
- Publication type:
- Article
11
USING LEAN MANUFACTURING TO IMPROVE PROCESS EFFICIENCY IN A FABRICATION COMPANY.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 3, p. 172, doi. 10.46793/aeletters.2024.9.3.5
- By:
- Publication type:
- Article
12
SYNTHESIS OF A356 ALLOY-VARIABLE PARTICLE SIZED BORON CARBIDE COMPOSITES: INVESTIGATIONS ON MECHANICAL BEHAVIOUR AND TENSILE FRACTOGRAPHY.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 3, p. 162, doi. 10.46793/aeletters.2024.9.3.4
- By:
- Publication type:
- Article
13
CONVERGENCE STRATEGIES FOR OPTIMIZING ANTENNA SELECTION IN A COMMUNICATION SYSTEM: A COMPLEX LINEAR DIOPHANTINE FUZZY SOFT SET APPROACH.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 3, p. 146, doi. 10.46793/aeletters.2024.9.3.3
- By:
- Publication type:
- Article
14
OPTIMAL SELECTION FOR MACHINING PROCESSES USING THE PSI-R-PIV METHOD.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 3, p. 132, doi. 10.46793/aeletters.2024.9.3.2
- By:
- Publication type:
- Article
15
MULTI-OBJECTIVE MODELING AND OPTIMIZATION OF THE THERMAL BEHAVIOR OF AN AT10-TYPE BELT TRANSMISSION USING ANOVA, RMS AND DF METHODS.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 3, p. 117, doi. 10.46793/aeletters.2024.9.3.1
- By:
- Publication type:
- Article
16
AN INVESTIGATION ON THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AN ULTRASONIC-ASSISTED STIR CASTING Al-Cu-Mg MATRIX-BASED COMPOSITE REINFORCED WITH AGRO WASTE ASH PARTICLES.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 1, p. 46, doi. 10.46793/aeletters.2024.9.1.5
- By:
- Publication type:
- Article
17
RESEARCH AND OPTIMIZATION OF SPORT UTILITY VEHICLE AERODYNAMIC DESIGN.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 2, p. 105, doi. 10.46793/aeletters.2024.9.2.5
- By:
- Publication type:
- Article
18
RELIABILITY ASSESSMENT OF ELECTROMECHANICAL MODULE WITH ASSOCIATION AMONG RELIABILITY INDICATORS.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 2, p. 85, doi. 10.46793/aeletters.2024.9.2.3
- By:
- Publication type:
- Article
19
ANALYSIS OF STRESS CORROSION CRACKING OF HETEROGENEOUS WELDED JOINTS IN SIMULATED PRIMARY WATER ENVIRONMENT.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 2, p. 76, doi. 10.46793/aeletters.2024.9.2.2
- By:
- Publication type:
- Article
20
IMPROVING THE PERFORMANCE OF HYBRID BIOCOMPOSITE MATERIALS USING EPOXY, VINYL ESTER AND POLYIMIDE POLYMER MATRIX: COMPARATIVE STUDY.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 2, p. 64, doi. 10.46793/aeletters.2024.9.2.1
- By:
- Publication type:
- Article
21
THERMAL SOURCE EFFECT ON THE NATURAL CONVECTION OF A NANOFLUID WITHIN A TRIANGULAR CAVITY.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 2, p. 94, doi. 10.46793/aeletters.2024.9.2.4
- By:
- Publication type:
- Article
22
MACHINE LEARNING PRACTICES DURING THE OPERATIONAL PHASE OF BUILDINGS: A CRITICAL REVIEW.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 1, p. 37, doi. 10.46793/aeletters.2024.9.1.4
- By:
- Publication type:
- Article
23
CYLINDRICAL OBSTACLE EFFECT ON CONVECTION INSIDE AN INCLINED ENCLOSURE FILLED WITH A NANOFLUID.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 1, p. 22, doi. 10.46793/aeletters.2024.9.1.3
- By:
- Publication type:
- Article
24
DECARBONIZING A THAI COAL POWER PLANT: EFFECT OF FLUE GAS LOADS ON CARBON CAPTURE PERFORMANCE AND ECONOMICS.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 1, p. 12, doi. 10.46793/aeletters.2024.9.1.2
- By:
- Publication type:
- Article
25
THERMAL CONDUCTIVITY MODELING OF DIELECTRIC OILS-BASED NANOFLUIDS USING THE FINITE ELEMENT METHOD.
- Published in:
- Applied Engineering Letters, 2024, v. 9, n. 1, p. 1, doi. 10.46793/aeletters.2024.9.1.1
- By:
- Publication type:
- Article
26
EVALUATING WIND TURBINE POWER PLANT RELIABILITY THROUGH FAULT TREE ANALYSIS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 4, p. 175, doi. 10.18485/aeletters.2023.8.4.5
- By:
- Publication type:
- Article
27
THE INFLUENCE OF DRYING MODE ON THE DRYING TIME OF ANCHOVY FISH IN A HYBRID INFRARED-CONVECTIVE DRYER: DRYING TIME CORRELATION AND TAGUCHI ANALYSIS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 4, p. 167, doi. 10.18485/aeletters.2023.8.4.4
- By:
- Publication type:
- Article
28
AN INVESTIGATION ON FLUID-STRUCTURE INTERACTION OF TWO TANDEM RECTANGULAR CYLINDERS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 4, p. 158, doi. 10.18485/aeletters.2023.8.4.3
- By:
- Publication type:
- Article
29
THE MULTI-CRITERIA DECISION-MAKING METHOD: SELECTION OF SUPPORT EQUIPMENT FOR CLASSROOM INSTRUCTORS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 4, p. 148, doi. 10.18485/aeletters.2023.8.4.2
- By:
- Publication type:
- Article
30
ENERGY-EFFICIENCY AND SUSTAINABILITY IN CROSS-DOCKING SUPPLY USING E-VEHICLES.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 4, p. 139, doi. 10.18485/aeletters.2023.8.4.1
- By:
- Publication type:
- Article
31
ENHANCING HANDHELD POLISHING MACHINE SELECTION: AN INTEGRATED APPROACH OF MARCOS METHODS AND WEIGHT DETERMINATION TECHNIQUES.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 3, p. 131, doi. 10.18485/aeletters.2023.8.3.5
- By:
- Publication type:
- Article
32
LEAN MANUFACTURING BASED SPACE UTILIZATION AND MOTION WASTE REDUCTION FOR EFFICIENCY ENHANCEMENT IN A MACHINING SHOP: A CASE STUDY.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 3, p. 121, doi. 10.18485/aeletters.2023.8.3.4
- By:
- Publication type:
- Article
33
ARTIFICIAL NEURAL NETWORK MODELING OF TRIBOLOGICAL PARAMETERS OPTIMIZATION OF AZ31-SiC METAL MATRIX COMPOSITE.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 3, p. 111, doi. 10.18485/aeletters.2023.8.3.3
- By:
- Publication type:
- Article
34
BUILDING DENSITY IMPACT ON FINAL ENERGY CONSUMPTION FOR ARTIFICIAL AND AUTOMATIC LIGHTING CONTROL SYSTEM IN THE SPORTS HALL – NUMERICAL CASE STUDY ANALYSIS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 3, p. 101, doi. 10.18485/aeletters.2023.8.3.2
- By:
- Publication type:
- Article
35
MATHEMATICAL MODEL OF AUTOMATIC FIRING SYSTEM OF GAS-OPERATED MACHINE GUN.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 3, p. 91, doi. 10.18485/aeletters.2023.8.3.1
- By:
- Publication type:
- Article
36
COMMUNICATION CONVERGENCE FOR IMPROVEMENT OF THE UNMANNED AERIAL SEARCH AND RESCUE MISSIONS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 2, p. 80, doi. 10.18485/aeletters.2023.8.2.5
- By:
- Publication type:
- Article
37
HARDWARE-IN-THE-LOOP TESTING OF VEHICLE'S ELECTRONIC STABILITY CONTROL SYSTEM.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 2, p. 70, doi. 10.18485/aeletters.2023.8.2.4
- By:
- Publication type:
- Article
38
EFFECT OF FRICTION STIR-WELDING TOOL PIN GEOMETRY ON THE CHARACTERISTICS OF AL-CU JOINTS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 2, p. 60, doi. 10.18485/aeletters.2023.8.2.3
- By:
- Publication type:
- Article
39
FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 2, p. 52, doi. 10.18485/aeletters.2023.8.2.2
- By:
- Publication type:
- Article
40
TEMPERATURE CONDITIONS AND DIAGNOSTICS OF BEARINGS.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 2, p. 45, doi. 10.18485/aeletters.2023.8.2.1
- By:
- Publication type:
- Article
41
A STUDY ON MULTI-BODY MODELING AND VIBRATION ANALYSIS FOR TWIN-BARREL GUN WHILE FIRING ON ELASTIC GROUND.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 1, p. 36, doi. 10.18485/aeletters.2023.8.1.5
- By:
- Publication type:
- Article
42
SELECTION OF SUITABLE DATA NORMALIZATION METHOD TO COMBINE WITH THE CRADIS METHOD FOR MAKING MULTI-CRITERIA DECISION.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 1, p. 24, doi. 10.18485/aeletters.2023.8.1.4
- By:
- Publication type:
- Article
43
STUDY OF STABILITY OF THE SHOT PEENING INDUCED COMPRESSIVE RESIDUAL STRESSES INTO C55 STEEL AT ELEVATED TEMPERATURES.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 1, p. 17, doi. 10.18485/aeletters.2023.8.1.3
- By:
- Publication type:
- Article
44
PERFORMANCE ANALYSIS OF EDM ON GREY CAST IRON USING RSM AND TOPSIS METHOD.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 1, p. 10, doi. 10.18485/aeletters.2023.8.1.2
- By:
- Publication type:
- Article
45
TECHNO-ECONOMIC FEASIBILITY OF DIFFERENT PHOTOVOLTAIC TECHNOLOGIES.
- Published in:
- Applied Engineering Letters, 2023, v. 8, n. 1, p. 1, doi. 10.18485/aeletters.2023.8.1.1
- By:
- Publication type:
- Article