Works matching DE "RUBBER goods"

Results: 330

INVESTIGATION INTO EFFICIENCY OF ADSORPTION PROCESS DURING UTILIZATION OF CURING GASES IN TYRE PRODUCTION.

Published in:

Journal of Environmental Engineering & Landscape Management, 2005, v. 13, n. 4, p. 153

By:

Vabolien&3x0117;, Giedrė;
Bronislovas Matuzevičius, Algirdas

Publication type:

Article

Optimisation of brass plating condition in plating of patented steel wire.

Published in:

Surface Engineering, 2011, v. 27, n. 1, p. 19, doi. 10.1179/026708410X12459349719972

By:

Saadatmand, M;
Sadeghpour, S;
Aghazadeh Mohandesi, J

Publication type:

Article

Ensuring Environmental Safety and Economic Benefits from the Use of Biodegradable Materials Based on Low‐Density Polyethylene with Natural Rubber Additives as Products with a Short Service Life.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000268

By:

Varyan, Ivetta A.;
Bobkov, Aleksandr L.;
Mikhailov, Igor A.;
Kolesnikova, Natalia N.

Publication type:

Article

Economical preparation of fluorine‐containing thermoplastic elastomer with good phase miscibility and elasticity based on dynamic vulcanization.

Published in:

Polymer International, 2023, v. 72, n. 11, p. 1006, doi. 10.1002/pi.6534

By:

Zhao, Yongsheng;
Xiong, Youhao;
Yan, Haonan;
Bi, Hongzhe;
Qin, Jianbin;
Shi, Xuetao;
Zhang, Guangcheng

Publication type:

Article

Reinforcing behavior of reclaimed rubber filled natural rubber composites.

Published in:

Polymer International, 2023, v. 72, n. 9, p. 841, doi. 10.1002/pi.6537

By:

Yao, Huidan;
Dong, Hailing;
Feng, Xincong;
Yang, Huiru;
Ma, Yongjie;
Zhou, Qi;
Zhao, Hongying;
Zhang, Ping;
Sun, Chong

Publication type:

Article

Analysis of power characteristics for preliminary grinding of reinforced vulcanizers.

Published in:

Chemical & Petroleum Engineering, 2006, v. 42, n. 7/8, p. 351, doi. 10.1007/s10556-006-0106-1

By:

Veshchev, A.;
Plotnikov, R.

Publication type:

Article

Thermotechnical Characteristics of Vulcanization Equipment for Tire Production.

Published in:

Chemical & Petroleum Engineering, 2004, v. 40, n. 1/2, p. 71, doi. 10.1023/B:CAPE.0000024140.21065.ac

By:

Tsyrul'nikov, I. M.

Publication type:

Article

Effects of Fe3O4 on the pyrolysis products of rubber seed oil at high temperatures.

Published in:

International Journal of Energy Research, 2020, v. 44, n. 1, p. 360, doi. 10.1002/er.4929

By:

Zhang, Shuoyao;
Li, Bo;
Zhou, Shiwei;
Wei, Yonggang;
Qi, Xianjin;
Wang, Hua

Publication type:

Article

Design Thinking aplicado como método de ensino e projeto de produtos em borracha reciclada.

Published in:

Actas de Diseño, 2021, v. 16, n. 37, p. 337

By:

Marcel de Arruda Torres, Pablo

Publication type:

Article

The effect of economic institutional based community, social network establishment, re-trust of social affiliation, and regrouping based on capital goods on economic welfare.

Published in:

Cogent Business & Management, 2021, v. 8, n. 1, p. 1, doi. 10.1080/23311975.2021.1959008

By:

Sujianto, Sujianto

Publication type:

Article

Multi-objective decision model for green supply chain management.

Published in:

Cogent Business & Management, 2020, v. 7, n. 1, p. 1, doi. 10.1080/23311975.2020.1783177

By:

Chanchaichujit, Janya;
Balasubramanian, Sreejith;
Shukla, Vinaya;
Rosas, Jose-Saavedra;
Tan, Albert W. K.

Publication type:

Article

A Survey of Synthetic Plastic and Rubber Objects in the Collections of the Victoria and Albert Museum.

Published in:

Museum Management & Curatorship, 2001, v. 19, n. 3, p. 321, doi. 10.1080/09647770101001903

By:

Keneghan, Brenda

Publication type:

Article

بهبود كيفيت اپتيكي ورق پليمتيلمتاكريلات به كمك روش شكل دهي با لاستيك

Published in:

Journal of Applied & Computational Sciences in Mechanics, 2018, v. 29, n. 1, p. 1, doi. 10.22067/fum-mech.v29i1.54157

By:

مجيد رضايي;
كورش حسن پور

Publication type:

Article

超声提取-气相色谱-三重四极杆串联质谱法测定斑马鱼胚胎中对苯二胺抗氧化剂.

Published in:

Journal of Chinese Mass Spectrometry Society, 2023, v. 44, n. 2, p. 314, doi. 10.7538/zpxb.2023.0003

By:

刘倩怡;
廖晓亮;
周嘉明;
陈智锋;
蔡宗苇

Publication type:

Article

ESTABLISHING CHANGES IN THE PARAMETERS OF TEAT RUBBER FOR MILKING MACHINES DURING TESTING AND UNDER INDUSTRIAL CONDITIONS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2023, v. 121, n. 1, p. 58, doi. 10.15587/1729-4061.2023.272030

By:

Paliy, Andriy;
Aliiev, Elchyn;
Paliy, Anatoliy;
Ishchenko, Katerina;
Rybalko, Ivan;
Pavlichenko, Olena;
Prihodko, Mikola;
Popsui, Vjacheslav;
Bondarchuk, Larisa;
Chernyavskaya, Tetyana

Publication type:

Article

IDENTIFYING CHANGES IN THE TECHNICAL PARAMETERS OF MILKING RUBBER UNDER INDUSTRIAL CONDITIONS TO ELUCIDATE THEIR EFFECT ON THE MILKING PROCESS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2021, v. 111, n. 1, p. 21, doi. 10.15587/1729-4061.2021.231917

By:

Paliy, Andriy;
Aliiev, Elchyn;
Nanka, Alexander;
Bogomolov, Oleksiy;
Bredixin, Vadim;
Paliy, Anatoliy;
Shkromada, Oksana;
Musiienko, Yurii;
Stockiy, Aleksandr;
Grebenik, Natalia

Publication type:

Article

Industrial water-use technical efficiency and potential reduction of CO2 emissions: evidence from industry-level data.

Published in:

Carbon Management, 2019, v. 10, n. 6, p. 513, doi. 10.1080/17583004.2019.1661733

By:

Lu, Wen-Cheng

Publication type:

Article

Improvement of the Dimensional Stability of Rubber Wood Based on the Synergies of Sucrose and Tung Oil Impregnation.

Published in:

Forests (19994907), 2023, v. 14, n. 9, p. 1831, doi. 10.3390/f14091831

By:

Yang, Chunwang;
Yang, Susu;
Yang, Huanxin;
Puangsin, Buapan;
Qiu, Jian

Publication type:

Article

APLICAREA METODEI AMDEC ÎNTR-UN FLUX DE PRODUCŢIE.

Published in:

Review of Management & Economic Engineering, 2020, v. 19, n. 1, p. 129

By:

BÂLDEA, Monica;
BĂLTEANU, Ancuţa

Publication type:

Article

Experimental and application of waste rubber low‐temperature green regeneration through ultrasound‐assisted method.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 2, p. 481, doi. 10.1002/pen.26560

By:

Cheng, Yaohua;
Liu, Qiong;
Wang, Qianting

Publication type:

Article

Tear fatigue behavior of lignin‐based sustainable rubber composites.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3589, doi. 10.1002/pen.26129

By:

Chowdhury, Soumya Ghosh;
Ghosh, Sreedip;
Chanda, Jagannath;
Ghosh, Prasenjit;
Bhattacharyya, Sanjay Kumar;
Mukhopadhyay, Rabindra

Publication type:

Article

Hyper‐viscoelastic characterization of highly filled rubber compound: Extending approach for geometrical defect analysis.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 2, p. 447, doi. 10.1002/pen.25857

By:

Kumar, Abhay;
Khanra, Sipra;
Bansal, Vidit;
Goyal, Sharad;
Nair, Sujith;
Hossain, Shaikh Jahangir;
Chattopadhyay, Santanu

Publication type:

Article

A new approach for kinetic modeling and optimization of rubber molding.

Published in:

Polymer Engineering & Science, 2021, v. 61, n. 3, p. 879, doi. 10.1002/pen.25636

By:

Bera, Oskar;
Pavličević, Jelena;
Ikonić, Bojana;
Lubura, Jelena;
Govedarica, Dragan;
Kojić, Predrag

Publication type:

Article

Evaluation of the role of devulcanized rubber on the thermomechanical properties of expanded ethylene‐propylene diene monomers composites.

Published in:

Polymer Engineering & Science, 2021, v. 61, n. 3, p. 767, doi. 10.1002/pen.25615

By:

Valentini, Francesco;
Dorigato, Andrea;
Rigotti, Daniele;
Pegoretti, Alessandro

Publication type:

Article

Effects of filler contents and processing parameters on the weldline strength of compression molded natural rubber.

Published in:

Polymer Engineering & Science, 2011, v. 51, n. 12, p. 2353, doi. 10.1002/pen.22000

By:

Patcharaphun, S.;
Chookaew, W.;
Tungkeunkunt, T.;
Na-Ranong, N.

Publication type:

Article

Thermal and kinetic study of tyre waste pyrolysis via TG-FTIR-MS analysis.

Published in:

Journal of Thermal Analysis & Calorimetry, 2007, v. 88, n. 2, p. 507, doi. 10.1007/s10973-006-8409-1

By:

Galvagno, S.;
Casu, S.;
Martino, M.;
Di Palma, E.;
Portofino, Sabrina

Publication type:

Article

Uptake of lead by carbonaceous adsorbents developed fromÂ tireÂ rubber.

Published in:

Adsorption, 2008, v. 14, n. 4/5, p. 591, doi. 10.1007/s10450-008-9115-z

By:

M. Alexandre-Franco;
C. FernÃ¡ndez-GonzÃ¡lez;
A. MacÃas-GarcÃa;
V. GÃ³mez-Serrano

Publication type:

Article

Aging Process Effects on the Characteristics of Vacuum Residue Oxidation Products with the Addition of Crumb Rubber.

Published in:

Molecules, 2022, v. 27, n. 10, p. 3284, doi. 10.3390/molecules27103284

By:

Ongarbayev, Yerdos;
Zhambolova, Ainur;
Tileuberdi, Yerbol;
Mansurov, Zulkhair;
Oliviero Rossi, Cesare;
Calandra, Pietro;
Teltayev, Bagdat

Publication type:

Article

Investigation of the Technological Parameters of the Suspension Process for Production of Ethylene-Propylene Diene EPDM Rubbers in the Presence of a Post-Metallocene Catalytic System.

Published in:

Chemistry & Technology of Fuels & Oils, 2022, v. 58, n. 5, p. 731, doi. 10.1007/s10553-022-01441-0

By:

Khakhin, L. A.;
Arutyunov, I. A.;
Potapova, S. N.;
Svetikov, D. V.;
Masoud, S. M.

Publication type:

Article

轮胎厚制品双侧非等温传热的定量预测方法.

Published in:

China Rubber Industry, 2024, v. 71, n. 11, p. 1, doi. 10.12136/j.issn.1000-890X.2024.00.0000

By:

王晓建;
王宁博;
隗思傲;
田雨濛;
李帛儒;
郇彦

Publication type:

Article

橡胶硫化烟气分析方法的研究现.

Published in:

China Rubber Industry, 2024, v. 71, n. 7, p. 550, doi. 10.12136/j.issn.1000-890X.2024.07.0550

By:

刘雪姣;
马楠;
温劭;
吴爱芹;
尹颀

Publication type:

Article

轨道车辆橡胶弹性元件研发中的仿真技术应用进展.

Published in:

China Rubber Industry, 2023, v. 70, n. 9, p. 746, doi. 10.12136/j.issn.1000-890X.2023.09.0746

By:

卜继玲;
刘柏兵;
葛琪

Publication type:

Article

动态共价交联橡胶：机遇与挑战.

Published in:

China Rubber Industry, 2023, v. 70, n. 9, p. 703, doi. 10.12136/j.issn.1000-890X.2023.09.0703

By:

余双舰;
吴思武;
唐征海;
郭宝春;
张立群

Publication type:

Article

聚稳丁腈橡胶的结构与性能研究.

Published in:

China Rubber Industry, 2023, v. 70, n. 7, p. 505, doi. 10.12136/j.issn.1000-890X.2023.07.0505

By:

范永将;
高卫光;
李冬红;
李红春;
瞿金磊;
杨荣浩;
刘莉

Publication type:

Article

便携式橡胶回弹仪的开发及应用.

Published in:

China Rubber Industry, 2023, v. 70, n. 6, p. 468, doi. 10.12136/j.issn.1000-890X.2023.06.0468

By:

杨荣浩;
张为健;
刘奕麟;
徐联军;
刘莉;
刘光烨;
张保岗

Publication type:

Article

INDUSTRIES.--(XXV.).

Published in:

Journal of Education, 1907, v. 66, n. 17, p. 466, doi. 10.1177/002205740706601717

By:

Wallace, R. W.

Publication type:

Article

Experimental Investigation of Vibration Reduction Effect of High-Pressure Air Compressor Using Composite Damping Base.

Published in:

Machines, 2023, v. 11, n. 2, p. 229, doi. 10.3390/machines11020229

By:

Zhao, Feng;
Li, He;
Li, Hui;
Liu, Duo

Publication type:

Article

Virtual image of a hand displaced in space influences action performance of the real hand.

Published in:

Scientific Reports, 2020, v. 10, n. 1, p. 1, doi. 10.1038/s41598-020-66348-4

By:

Ambron, Elisabetta;
Miller, Alexander;
Connor, Stephanie;
Branch Coslett, H.

Publication type:

Article

ASSESSMENT OF THE TECHNICAL CONDITION OF TYRES USED IN AGRICULTURAL AND FORESTRY MACHINERY.

Published in:

Engineering Sciences & Technologies / Nauki Inżynierskie i Technologie, 2019, v. 2, n. 33, p. 60, doi. 10.15611/nit.2019.2.04

By:

Gorzelańczyk, Piotr;
Rochowiak, Łukasz

Publication type:

Article

ASSESSMENT OF TECHNICAL CONDITION OF FORKLIFT TYRES USED IN INTERNAL TRANSPORT BY STUDYING DAMAGES AND OPERATING CONDITIONS.

Published in:

Engineering Sciences & Technologies / Nauki Inżynierskie i Technologie, 2019, v. 2, n. 33, p. 44, doi. 10.15611/nit.2019.2.03

By:

Gorzelańczyk, Piotr;
Górniak, Wojciech

Publication type:

Article

'Perished Alive': Dubliners and the Reek of Rubber.

Published in:

Essays in Criticism, 2017, v. 67, n. 1, p. 20, doi. 10.1093/escrit/cgw024

By:

BRADSHAW, DAVID

Publication type:

Article

Preparation and characterization of eco-friendly hybrid biocomposites from natural rubber, biocarbon, and carbon black.

Published in:

Express Polymer Letters, 2021, v. 15, n. 3, p. 236, doi. 10.3144/expresspolymlett.2021.21

By:

Paleri, D. M.;
Rodriguez-Uribe, A.;
Misra, M.;
Mohanty, A. K.

Publication type:

Article

Electrical conductivity degradation of fatigued carbon black reinforced natural rubber composites: Effects of carbon nanotubes and strain amplitudes.

Published in:

Express Polymer Letters, 2019, v. 13, n. 12, p. 1116, doi. 10.3144/expresspolymlett.2019.96

By:

Harea, E.;
Datta, S.;
Stěnička, M.;
Stoček, R.

Publication type:

Article

Editorial corner-a personal view 'Waking sleeping beauty': Regeneration of vulcanized rubber by triggering dynamicity of the inherent sulfur network.

Published in:

2016

By:

Zhang, M. Q.

Publication type:

Editorial

Rubber composite fibers containing silver nanoparticles prepared by electrospinning and in-situ chemical crosslinking.

Published in:

Express Polymer Letters, 2012, v. 6, n. 4, p. 258, doi. 10.3144/expresspolymlett.2012.29

By:

Hu, Q.;
Wu, H.;
Zhang, L.;
Fong, H.;
Tian, M.

Publication type:

Article

David Newnham's knee-jerk reaction to the catalogues.

Published in:

Nursing Standard, 2004, v. 19, n. 5, p. 31, doi. 10.7748/ns.19.5.31.s60

By:

Newnham, David

Publication type:

Article

Black Liquor as a Multifunctional Additive for Enhancing Mechanical and Antioxidant Properties of Natural Rubber Latex.

Published in:

Journal of Applied Polymer Science, 2025, v. 142, n. 12, p. 1, doi. 10.1002/app.56636

By:

Zhong, Kai;
Jiang, Guangzhen;
Yan, Sitong;
Wang, Zhifen;
Fang, Lin

Publication type:

Article

Compatibility analysis between natural rubber/polybutadiene rubber and protective waxes based on experiments and materials studio simulations.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 23, p. 1, doi. 10.1002/app.55468

By:

Jiang, Shuangyan;
Li, Yue;
Yong, Zhanfu

Publication type:

Article

Study on the effect of the molding process on the uniformity of rubber products.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 47, p. 1, doi. 10.1002/app.54700

By:

Wang, Tongkun;
Jiao, Dongmei;
Zhan, Meng;
Lv, Wei;
Gai, Minghui;
Zong, Dianrui

Publication type:

Article

Preparation and characterization of red mud/liquid silicon rubber with good thermal‐stability and processability.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 38, p. 1, doi. 10.1002/app.54427

By:

Wang, Dingsong;
Qin, Jingjing;
Liu, Jiaming;
Wu, Mengqin;
Fu, Lifu;
Liu, Xiaohong;
Shi, Min;
Liang, Liyan;
Dong, Yonglu

Publication type:

Article