Overview of Dual Two-Level Inverter Configurations for Open-End Winding Machines: Enhancing Power Quality and Efficiency.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 10, p. 5611, doi. 10.3390/app15105611
- By:
- Publication type:
- Article
Works matching DE "WINDING machines"
Results: 366
1
2
Multi-stage angle sensors.
- Published in:
- Measurement Techniques, 2012, v. 54, n. 11, p. 1239, doi. 10.1007/s11018-012-9887-0
- By:
- Publication type:
- Article
3
Substantiation and development of innovative container technology for rock mass lifting from deep open pits.
- Published in:
- Mining of Mineral Deposits, 2022, v. 16, n. 4, p. 87, doi. 10.33271/mining16.04.087
- By:
- Publication type:
- Article
4
Impact testing of end-winding in two hydro generators in different temperature state.
- Published in:
- Vibroengineering Procedia, 2018, v. 18, p. 27, doi. 10.21595/vp.2018.19901
- By:
- Publication type:
- Article
5
Modeling of Damping for Power System Stability Analysis.
- Published in:
- Electric Power Components & Systems, 2004, v. 32, n. 8, p. 827, doi. 10.1080/15325000490466654
- By:
- Publication type:
- Article
6
Frequency Response of Two-Winding Transformers Obtained by a Distributed-Parameter s-Domain Method.
- Published in:
- Electric Power Components & Systems, 2004, v. 32, n. 8, p. 755, doi. 10.1080/15325000490466690
- By:
- Publication type:
- Article
7
Influence of Coils Double Flexion on the Reliability of Two-Layer Winding AC Machines.
- Published in:
- Electric Power Components & Systems, 2002, v. 30, n. 7, p. 653, doi. 10.1080/15325000290085109
- By:
- Publication type:
- Article
8
Application and Control of a Doubly Fed Induction Machine Integrated in Wind Energy System.
- Published in:
- Instrumentation, Mesures, Métrologies, 2019, v. 18, n. 3, p. 257, doi. 10.18280/i2m.180305
- By:
- Publication type:
- Article
9
Asymptotic behavior of solutions of differential equations describing synchronous machines.
- Published in:
- Doklady Mathematics, 2012, v. 86, n. 1, p. 530, doi. 10.1134/S1064562412040266
- By:
- Publication type:
- Article
10
Performance Comparison of Spoke Array Fault Tolerant PM Vernier Rim Driven Machine with Different Numbers of Flux Modulation Poles.
- Published in:
- Progress in Electromagnetics Research M, 2021, v. 105, p. 55, doi. 10.2528/pierm21082606
- By:
- Publication type:
- Article
11
Salient Pole Synchronous Generator Optimization by Combined Application of Slot Skew and Damper Winding Pitch Methods.
- Published in:
- Progress in Electromagnetics Research M, 2018, v. 73, p. 81
- By:
- Publication type:
- Article
12
Assessment of Materials for High-Speed PMSMs Having a Tooth-Coil Topology.
- Published in:
- Progress in Electromagnetics Research M, 2016, v. 51, p. 101, doi. 10.2528/pierm16080604
- By:
- Publication type:
- Article
13
A Novel Space Vector PWM Based Direct Torque Control Algorithm for Open End Winding Induction Motor Drive.
- Published in:
- International Review of Automatic Control, 2013, v. 6, n. 1, p. 29
- By:
- Publication type:
- Article
14
Assembling mobile pulley ring to the pulley shaft proposed for MK-5 x 2 type winding installation in Petrilamine.
- Published in:
- Mining Revue / Revista Minelor, 2010, v. 16, n. 7, p. 2
- By:
- Publication type:
- Article
15
Influence of technological mechanical loads on Lonea Mine's MK-5 × 2 type winding installation's pulley shaft.
- Published in:
- Mining Revue / Revista Minelor, 2010, v. 16, n. 5, p. 11
- By:
- Publication type:
- Article
16
New Products.
- Published in:
- 1978
- Publication type:
- Product Review
17
Dexter Program For Maximum Trimer Control.
- Published in:
- Textile Chemist & Colorist, 1974, v. 6, n. 3, p. 58
- Publication type:
- Article
18
Dynamic response of filament winding angle on complex shaped mandrels.
- Published in:
- Industria Textila, 2020, v. 71, n. 5, p. 452, doi. 10.35530/IT.071.05.1717
- By:
- Publication type:
- Article
19
AC Loss Estimation on HTS Armature Windings for a 30-kW Marine Generator Prototype.
- Published in:
- Journal of Superconductivity & Novel Magnetism, 2021, v. 34, n. 1, p. 85, doi. 10.1007/s10948-020-05719-4
- By:
- Publication type:
- Article
20
THE EFFECT OF WINDING ANGLE ON UNWINDING YARN.
- Published in:
- Transactions of FAMENA, 2016, v. 40, n. 3, p. 29, doi. 10.21278/TOF.40303
- By:
- Publication type:
- Article
21
Retainability design of assembly precision considering dynamic characteristics of high-speed spindle.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 11, p. 5389, doi. 10.1007/s00170-025-15140-7
- By:
- Publication type:
- Article
22
Method of Calculating the Preforming Parameters of Wires in Cable-winding with the Use of the Deform-3D Software.
- Published in:
- Metallurgist, 2014, v. 57, n. 11/12, p. 1067, doi. 10.1007/s11015-014-9846-x
- By:
- Publication type:
- Article
23
AC losses calculation of parallel multi‐strand flat wire windings for automotive drive motor.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2024, v. 18, n. 1, p. 116, doi. 10.1049/elp2.12371
- By:
- Publication type:
- Article
24
A peak time shifting phenomenon in transformer axial short‐circuit electromagnetic force due to the coupling of electromagnetic‐axial vibration.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2023, v. 17, n. 12, p. 1573, doi. 10.1049/elp2.12381
- By:
- Publication type:
- Article
25
A high‐efficiency magnetic‐geared double‐rotor machine with the coreless stator for hybrid aircraft propulsion.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2023, v. 17, n. 11, p. 1367, doi. 10.1049/elp2.12347
- By:
- Publication type:
- Article
26
Investigation into fault tolerant capability of new modular low‐speed and high‐torque direct‐drive permanent magnet motor based on unequal span winding.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2021, v. 15, n. 10, p. 1358, doi. 10.1049/elp2.12105
- By:
- Publication type:
- Article
27
Design and electric field analysis of novel winding structures with fillets for medium frequency transformers.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2021, v. 15, n. 10, p. 1274, doi. 10.1049/elp2.12095
- By:
- Publication type:
- Article
28
Investigation of the working mechanism and characteristics of dual-mode doubly salient starter generator with variable winding.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2018, v. 12, n. 9, p. 1240, doi. 10.1049/iet-epa.2018.0134
- By:
- Publication type:
- Article
29
Reduction of torque ripple in a wound-rotor brushless doubly-fed machine by using the tooth notching.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2018, v. 12, n. 5, p. 635, doi. 10.1049/iet-epa.2017.0683
- By:
- Publication type:
- Article
30
Overview of novel magnetically geared machines with partitioned stators.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2018, v. 12, n. 5, p. 595, doi. 10.1049/iet-epa.2017.0680
- By:
- Publication type:
- Article
31
Turn-turn short circuit fault management in permanent magnet machines.
- Published in:
- IET Electric Power Applications (Wiley-Blackwell), 2015, v. 9, n. 9, p. 634, doi. 10.1049/iet-epa.2015.0020
- By:
- Publication type:
- Article
32
DTC Switching Strategy for Open-end Winding of Induction Machines Fed by a Dual-output Indirect Matrix Converter.
- Published in:
- Periodica Polytechnica: Electrical Engineering & Computer Science, 2021, v. 65, n. 3, p. 186, doi. 10.3311/PPee.17597
- By:
- Publication type:
- Article
33
The Potential of Machine Learning for Wind Speed and Direction Short-Term Forecasting: A Systematic Review.
- Published in:
- Computers (2073-431X), 2023, v. 12, n. 10, p. 206, doi. 10.3390/computers12100206
- By:
- Publication type:
- Article
34
Cogging Torque Mitigation using the Unequal Rotor Slot Arcs Method based on Magnetic Permeance Distribution for Flux-Switching Machines.
- Published in:
- Journal of Electromagnetic Engineering & Science, 2025, v. 25, n. 1, p. 8, doi. 10.26866/jees.2025.1.r.273
- Publication type:
- Article
35
Eccentricity Compensation in Switched Reluctance Machines via Controlling Winding Turns/Stator Current: Theory, Modeling, and Electromagnetic Analysis.
- Published in:
- Applied Computational Electromagnetics Society Journal, 2013, v. 28, n. 2, p. 162
- By:
- Publication type:
- Article
36
Palmar Vertical Hemi-Hand Amputation: A Rare Form of Amputation.
- Published in:
- Turkish Journal of Plastic Surgery, 2020, v. 28, n. 4, p. 244, doi. 10.4103/tjps.tjps_70_19
- By:
- Publication type:
- Article
37
INFLUENCE OF PARAMETERS OF A RUBBER-ROPE CABLE ON THE TORSIONAL STIFFNESS OF THE BODY OF THE WINDING.
- Published in:
- Scientific Bulletin of National Mining University, 2018, n. 5, p. 54, doi. 10.29202/nvngu/2018-5/11
- By:
- Publication type:
- Article
38
DYNAMIC MODEL OF INTERACTION OF MECHANISMS ON THE SECTION BETWEEN THE ROLL MILL STAND AND THE COILER IN THE PROCESS OF WIRE WINDING BY GARRETT REEL.
- Published in:
- Scientific Bulletin of National Mining University, 2017, n. 4, p. 61
- By:
- Publication type:
- Article
39
NOTE ON TIME DISTRIBUTIONS FOR TWO ELEMENTS IN CAPACITOR WINDING.
- Published in:
- International Journal of Production Research, 1968, v. 7, n. 2, p. 147, doi. 10.1080/00207546808929804
- By:
- Publication type:
- Article
40
Analyzing Short Circuit Forces in Transformer for Double Layer Helical LV Winding using FEM.
- Published in:
- International Journal of Performability Engineering, 2018, v. 14, n. 3, p. 425, doi. 10.23940/ijpe.18.03.p3.425433
- By:
- Publication type:
- Article
41
An engineering method of calculating the critical thickness of the discs of the windings of transformers for resistance-welding machines.
- Published in:
- Welding International, 2011, v. 25, n. 7, p. 526, doi. 10.1080/09507116.2011.554255
- By:
- Publication type:
- Article
42
Buckling analysis of composite long cylinders using probabilistic finite element method.
- Published in:
- Mechanika, 2011, v. 17, n. 5, p. 467, doi. 10.5755/j01.mech.17.5.721
- By:
- Publication type:
- Article
43
Study on a reducing-hairiness nozzle attached on the winding machine.
- Published in:
- Journal of the Textile Institute, 2009, v. 100, n. 7, p. 649, doi. 10.1080/00405000802273970
- By:
- Publication type:
- Article
44
Winding core spun elastic yarns on cone bobbins to be dyed.
- Published in:
- Journal of the Textile Institute, 2009, v. 100, n. 5, p. 412, doi. 10.1080/00405000701863319
- By:
- Publication type:
- Article
45
Hairiness of spun yarns and their reduction using air-nozzle in winding.
- Published in:
- Journal of the Textile Institute, 2007, v. 98, n. 3, p. 243, doi. 10.1080/00405000701502743
- By:
- Publication type:
- Article
46
Damage detection of carbon fibers in filament winding machines using an electrical resistance method.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 93, n. 1-4, p. 671, doi. 10.1007/s00170-017-0457-0
- By:
- Publication type:
- Article
47
Experimental research on tension balance control of reciprocating winding diamond wire saw.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 91, n. 1-4, p. 423, doi. 10.1007/s00170-016-9746-2
- By:
- Publication type:
- Article
48
Mechanical performance analysis of hybrid metal-foam/composite samples.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 60, n. 1-4, p. 181, doi. 10.1007/s00170-011-3603-0
- By:
- Publication type:
- Article
49
Improving yarn quality through multi-response optimisation of electronic yarn clearer in winding machine.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 56, n. 1-4, p. 387, doi. 10.1007/s00170-011-3163-3
- By:
- Publication type:
- Article
50
Investigation of the Dynamic Behavior of the Electric Drive of a Winding Device of a Line for the Production of Bulk Nonwoven Fabric.
- Published in:
- Fibre Chemistry, 2018, v. 50, n. 2, p. 128, doi. 10.1007/s10692-018-9947-6
- By:
- Publication type:
- Article