Works matching DE "IMPELLERS"

Results: 1454

Proposal of hemodynamically improved design of an axial flow blood pump for LVAD.

Published in:

2020

By:

Kannojiya, Vikas;
Das, Arup Kumar;
Das, Prasanta Kumar

Publication type:

journal article

Efecto de la velocidad de agitación en la cinética de lixiviación con tiourea de minerales flotados de oro.

Published in:

Ingeniería y Desarrollo, 2020, v. 38, n. 1, p. 243

By:

ROMERO BONILLA, HUGO;
GUERRERO RODRÍGUEZ, RICARDO;
MOROCHO, MARÍA MORA

Publication type:

Article

A new boundary layer equation and its application to the flow in turbo-machinery.

Published in:

Numerical Methods for Partial Differential Equations, 2014, v. 30, n. 5, p. 1455, doi. 10.1002/num.21844

By:

Li, Kaitai;
Chen, Hao;
Zhang, Yin;
Wang, Shangjin

Publication type:

Article

Optimal strategy for finishing impeller blades using 5-axis machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 5-8, p. 573, doi. 10.1007/s00170-011-3424-1

By:

Chaves-Jacob, Julien;
Poulachon, Gérard;
Duc, Emmanuel

Publication type:

Article

Design for manufacturing applied to turbomachine components.

Published in:

International Journal of Advanced Manufacturing Technology, 2011, v. 57, n. 5-8, p. 453, doi. 10.1007/s00170-011-3306-6

By:

Chaves-Jacob, Julien;
Poulachon, Gérard;
Duc, Emmanuel;
Geffroy, Christian

Publication type:

Article

Investigation of tool orientation for milling blade of impeller in five-axis machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2011, v. 52, n. 1-4, p. 235, doi. 10.1007/s00170-010-2701-8

By:

Chen, Kuan-Hung

Publication type:

Article

The vibration behavior of impeller blades in the five-axis CNC flank milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2010, v. 46, n. 9-12, p. 1171, doi. 10.1007/s00170-009-2182-9

By:

Sonthipermpoon, Kawin;
Bohez, E.;
Hasemann, H.;
Rautenberg, M.

Publication type:

Article

Integrated rough machining methodology for centrifugal impeller manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2007, v. 34, n. 11/12, p. 1062, doi. 10.1007/s00170-006-0675-3

By:

Li-Chang Chuang;
Hong-Tsu Young

Publication type:

Article

An Integrated Machining Approach for a Centrifugal Impeller.

Published in:

International Journal of Advanced Manufacturing Technology, 2003, v. 21, n. 8, p. 556, doi. 10.1007/s00170-002-1382-3

By:

Young, H.-T.;
Chuang, L.-C.

Publication type:

Article

Sensitivity analysis and optimization of a CO<sub>2</sub> centrifugal compressor impeller with a vaneless diffuser.

Published in:

Structural & Multidisciplinary Optimization, 2021, v. 64, n. 3, p. 1607, doi. 10.1007/s00158-021-02914-2

By:

Salviano, Leandro Oliveira;
Gasparin, Elóy Esteves;
Mattos, Vitor Cesar N.;
Barbizan, Bruno;
Saltara, Fábio;
de Mello, Paulo Eduardo Batista;
Dezan, Daniel Jonas;
Yanagihara, Jurandir Itizo

Publication type:

Article

Centrifugal pump impeller and volute shape optimization via combined NUMECA, genetic algorithm, and back propagation neural network.

Published in:

Structural & Multidisciplinary Optimization, 2020, v. 61, n. 1, p. 381, doi. 10.1007/s00158-019-02367-8

By:

Han, Xiangdong;
Kang, Yong;
Sheng, Jianping;
Hu, Yi;
Zhao, Weiguo

Publication type:

Article

Investigation of an efficient shape optimization procedure for centrifugal pump impeller using eagle strategy algorithm and ANN (case study: slurry flow).

Published in:

Structural & Multidisciplinary Optimization, 2018, v. 58, n. 2, p. 459, doi. 10.1007/s00158-018-1897-3

By:

Derakhshan, Shahram;
Bashiri, Mohamad

Publication type:

Article

Study of the Efficiency of Heat Transfer in a Stirred Tank with Nonuniform Movement of the Impeller.

Published in:

Theoretical Foundations of Chemical Engineering, 2023, v. 57, n. 2, p. 215, doi. 10.1134/S0040579523020094

By:

Prikhodko, A. A.;
Gerasimenko, E. O.

Publication type:

Article

Design of Centrifugal Fan with Flexible Blades to Extend the Effective Operating Range in Various Speeds and Mass Flows Based on Numerical Analysis and Statistical Computation.

Published in:

Journal of Applied & Computational Mechanics, 2025, v. 11, n. 1, p. 55, doi. 10.22055/jacm.2024.44608.4249

By:

Thai Thanh Hiep;
Le Thanh Long;
Vu Viet Thang;
Hong Duc Thong

Publication type:

Article

Computational and Experimental Study of the Composite Material for the Centrifugal Pump Impellers Manufacturing.

Published in:

Journal of Applied & Computational Mechanics, 2022, v. 8, n. 4, p. 1407, doi. 10.22055/jacm.2022.40366.3574

By:

Isametova, Madina;
Nussipali, Rollan;
Karaivanov, Dimitar;
Abilikhair, Zhastalap;
Isametov, Aysen

Publication type:

Article

Finite Elements Analysis of the Hyperelastic Impeller Rotating in the Self-Priming Pump.

Published in:

Journal of Applied & Computational Mechanics, 2022, v. 8, n. 3, p. 1103, doi. 10.22055/jacm.2022.39750.3457

By:

Pavlovic, Ana

Publication type:

Article

Satellite Thermal Management Pump Impeller Design and Optimization.

Published in:

Inventions (2411-5134), 2024, v. 9, n. 3, p. 54, doi. 10.3390/inventions9030054

By:

Drăgan, Valeriu;
Dumitrescu, Oana;
Dobromirescu, Cristian;
Popa, Ionuț Florian

Publication type:

Article

Optimal Tuning of PID-Controlled Magnetic Bearing System for Tracking Control of Pump Impeller in Artificial Heart.

Published in:

Journal Européen des Systèmes Automatisés, 2023, v. 56, n. 1, p. 21, doi. 10.18280/jesa.560103

By:

Noaman, Noaman M.;
Gatea, Ahmed Sharhan;
Humaidi, Amjad J.;
Kadhim, Saleem Khalefa;
Hasan, Alaq F.

Publication type:

Article

Process Parameters Study for Deformation Machining Stretching Mode.

Published in:

Grenze International Journal of Engineering & Technology (GIJET), 2024, v. 10, n. 2,Part 5, p. 6127

By:

Parmar, P. L.;
George, P. M.

Publication type:

Article

Numerical Investigation of The Effect of Impeller Blade Angle for Stirred Tank.

Published in:

Sakarya University Journal of Science (SAUJS) / Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2022, v. 26, n. 2, p. 397, doi. 10.16984/saufenbilder.992396

By:

ALNAK, Dogan Engin;
KOCA, Ferhat;
ALNAK, Yeliz

Publication type:

Article

砂型增材制造表面质量精准调控工艺.

Published in:

Journal of Nanjing University of Aeronautics & Astronautics / Nanjing Hangkong Hangtian Daxue Xuebao, 2025, v. 57, n. 1, p. 34, doi. 10.16356/j.1005⁃2615.2025.01.003

By:

宋魏飞;
单忠德;
杨浩秦;
任洪稳;
闫丹丹;
姜二彪

Publication type:

Article

带内部叶轮结构的涡轮盘腔流动与温降特性研究.

Published in:

Journal of Nanjing University of Aeronautics & Astronautics / Nanjing Hangkong Hangtian Daxue Xuebao, 2021, v. 53, n. 4, p. 562, doi. 10.16356/j.1005⁃2615.2021.04.009

By:

邓丽君;
朱宇

Publication type:

Article

Corrosion rate determination of vessel walls agitated by double impeller and gas sparging.

Published in:

Corrosion Reviews, 2017, v. 35, n. 1, p. 53, doi. 10.1515/corrrev-2016-0057

By:

Baday, Amani A.;
ElShazly, Yehia M. S.;
Nosier, Shaaban A.

Publication type:

Article

Numerical Investigation of a First Stage of a Multistage Centrifugal Pump: Impeller, Diffuser with Return Vanes, and Casing.

Published in:

ISRN Mechanical Engineering, 2013, p. 1, doi. 10.1155/2013/578072

By:

La Roche-Carrier, Nicolas;
Dituba Ngoma, Guyh;
Ghie, Walid

Publication type:

Article

Design Details and Fluid Flow Analysis for the Centrifugal Pump with Special Rotor Pattern.

Published in:

Hidraulica, 2017, n. 1, p. 33

By:

ȘCHEAUA, Fănel Dorel

Publication type:

Article

Configurations of the Flow Induced by a Fan Impeller without Casing.

Published in:

Hidraulica, 2015, n. 3, p. 7

By:

DRAGOMIRESCU, Andrei

Publication type:

Article

A dynamic synchronous optimisation method of tool sequence selection and multi-state process models depth distribution for high efficiency machining.

Published in:

International Journal of Production Research, 2020, v. 58, n. 20, p. 6145, doi. 10.1080/00207543.2019.1668069

By:

Han, Feiyan;
Zhang, Chuanwei;
Zhang, Wu;
Guo, Wei;
Feng, Bin

Publication type:

Article

Practical notes and latest technologies on modern centrifugal compressor component and system selection.

Published in:

2012

By:

Almasi, A.

Publication type:

Case Study

Fabrication of PRAl-SiC-MMC Using Melt-Stirring Technique and Analysis of EDM Parameters.

Published in:

IUP Journal of Mechanical Engineering, 2013, v. 6, n. 1, p. 27

By:

Meena, K. L.;
Manna, Alakesh

Publication type:

Article

Diecast aluminum impeller reduces weight and porosity.

Published in:: Advanced Materials & Processes, 2005, v. 163, n. 8, p. 20
Publication type:: Article

Injection-molded stainless steel cuts costs for impeller.

Published in:: Advanced Materials & Processes, 2004, v. 162, n. 1, p. 12
Publication type:: Article

ANALYSIS OF THE APPLICABILITY DEGREE OF MULTIPLE ROTATING REFERENCE FRAMES (MRF) METHOD FOR DESIGN OF AUTOMOTIVE WATER TURBOPUMPS.

Published in:

Annals of DAAAM & Proceedings, 2010, p. 1537

By:

Balic, S.;
Duhovnik, J.;
Beslagic, E.

Publication type:

Article

Multi-fault Condition Monitoring of Slurry Pump with Principle Component Analysis and Sequential Hypothesis Test.

Published in:

International Journal of Pattern Recognition & Artificial Intelligence, 2020, v. 34, n. 7, p. N.PAG, doi. 10.1142/S0218001420590193

By:

Chen, Hanxin;
Huang, Wenjian;
Huang, Jinmin;
Cao, Chenghao;
Yang, Liu;
He, Yibin;
Zeng, Li

Publication type:

Article

INVESTIGATION OF DIFFERENT IMPELLER CONFIGURATION ON ANAEROBIC CO-DIGESTION OF MANURE AND ORGANIC WASTE FOR BIO-METHANE PRODUCTION.

Published in:

Suranaree Journal of Science & Technology, 2020, v. 27, n. 3, p. 010012-1

By:

Pannucharoenwong, Nattadon;
Rattanadecho, Phadungsak;
Timchenko, Victoria;
Echaroj, Snunkhaem

Publication type:

Article

Optimization of Geometrical Features of a Vane Concrete Rheometer Using Genetic Algorithm.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2021, v. 46, n. 11, p. 11279, doi. 10.1007/s13369-021-05781-7

By:

Mozumder, Ruhul Amin;
Laskar, Sulaem Musaddiq;
Laskar, Aminul Islam

Publication type:

Article

Collaborative Design of the Wrap Angles Between Impeller and Space Diffuser of Diagonal-Flow Pump.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2020, v. 45, n. 9, p. 7835, doi. 10.1007/s13369-020-04725-x

By:

Pei, Yingju;
Liu, Qingyou;
Wang, Guorong;
Song, Wenwu

Publication type:

Article

Numerical Modeling of the Flow Inside a Centrifugal Pump: Influence of Impeller-Volute Interaction on Velocity and Pressure Fields.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2016, v. 41, n. 11, p. 4463, doi. 10.1007/s13369-016-2157-8

By:

Chalghoum, Issa;
Kanfoudi, Hatem;
Elaoud, Sami;
Akrout, Mohsen;
Zgolli, Ridha

Publication type:

Article

Study of Pressure Fluctuations and Induced Vibration at Blade-Passing Frequencies of a Double Volute Pump.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2011, v. 36, n. 7, p. 1333, doi. 10.1007/s13369-011-0119-8

By:

Khalifa, Atia;
Al-Qutub, Amro;
Ben-Mansour, Rached

Publication type:

Article

Improving the performance of mechanical stirring in biogas plant by computational fluid dynamics (CFD).

Published in:

Agricultural Engineering International: CIGR Journal, 2017, v. 19, n. 4, p. 91

By:

Mohammadrezaei, Rashed;
Zareei, Samira;
Behroozi-Khazaei, Nasser

Publication type:

Article

Development of a Bush Mango (Irvingia Gabonensis) Nutcracker.

Published in:

Agricultural Engineering International: CIGR Journal, 2015, v. 17, n. 2, p. 191

By:

Alonge, A. F.;
Idung, M.

Publication type:

Article

Impact force of melon seeds during shelling.

Published in:

Agricultural Engineering International: CIGR Journal, 2010, v. 12, n. 1, p. 182

By:

Okokon, F. B.;
Ekpenyong, E.;
Nwaukwa, C.;
Akpan, N.;
Abam, F. I.

Publication type:

Article

Influence of Semicontinuous Processing on the Rheology and Droplet Size Distribution of Mayonnaise-like Emulsions.

Published in:

Food Science & Technology International, 2009, v. 15, n. 4, p. 367, doi. 10.1177/1082013209345046

By:

Bengoechea, C.;
López, M. L.;
Cordobés, F.;
Guerrero, A.

Publication type:

Article

MODELLING THE INFLUENCE OF INLET ANGLE CHANGE ON THE PERFORMANCE OF SUBMERSIBLE WELL PUMPS.

Published in:

International Journal of Simulation Modelling (IJSIMM), 2020, v. 19, n. 1, p. 100, doi. 10.2507/IJSIMM19-1-506

By:

Wang, H. L.;
Long, B.;
Yang, Y.;
Xiao, Y.;
Wang, C.

Publication type:

Article

PERFORMANCE OPTIMIZATION OF ENERGY RECOVERY DEVICE BASED ON PAT WITH GUIDE VANE.

Published in:

International Journal of Simulation Modelling (IJSIMM), 2018, v. 17, n. 3, p. 472, doi. 10.2507/IJSIMM17(3)443

By:

Shi, H. X.;
Chai, L. P.;
Su, X. Z.;
Jaini, R.

Publication type:

Article

Selecting Mixing Impellers: Presented here is a brief overview of the considerations involved in matching the right impeller with a given application.

Published in:

Chemical Engineering, 2024, v. 131, n. 4, p. 40

By:

Hennis, Mark

Publication type:

Article

Focus on Pumps.

Published in:

Chemical Engineering, 2021, v. 128, n. 6, p. 19

By:

Ondrey, Gerald

Publication type:

Article

These centrifugal pumps handle very high temperatures.

Published in:: Chemical Engineering, 2021, v. 128, n. 2, p. N.PAG
Publication type:: Article

Mixing: Impeller Performance in Stirred Tanks.

Published in:

Chemical Engineering, 2017, v. 124, n. 8, p. 42

By:

Grenville, Richard K.;
Giacomelli, Jason J.;
Padron, Gustavo;
Brown, David A. R.

Publication type:

Article

Maximizing yield in solids blenders.

Published in:: 2016
Publication type:: Product Review

Centrifugal Compressors for CPI Plants.

Published in:

Chemical Engineering, 2012, v. 119, n. 5, p. 42

By:

Almasi, Amin;
Ondrey, Gerald

Publication type:

Article