Works matching DE "CARBON fiber-reinforced plastics"
Results: 2779
Interface electrochemical corrosion behaviour of alclad Al-Zn-Mg-Cu-Cr Al alloy adhesively bonded with carbon fibre reinforced plastic stiffener.
- Published in:
- Corrosion Engineering, Science & Technology, 2014, v. 49, n. 2, p. 116, doi. 10.1179/1743278213Y.0000000118
- By:
- Publication type:
- Article
Comparative experiments on amine vs. acid anhydride curing agents for epoxy resin required for automotive parts.
- Published in:
- Journal of Polymer Research, 2023, v. 30, n. 1, p. 1, doi. 10.1007/s10965-022-03396-6
- By:
- Publication type:
- Article
Mechanical performance of modified Polypropylene/Polyamide matrix reinforced with treated recycled carbon fibers for lightweight applications.
- Published in:
- Journal of Polymer Research, 2022, v. 29, n. 4, p. 1, doi. 10.1007/s10965-022-02975-x
- By:
- Publication type:
- Article
Morphological, physicochemical, and flexural characterization of carbon fiber paper–reinforced polyamide 6 for long-term application in aqueous environments.
- Published in:
- Journal of Polymer Research, 2021, v. 28, n. 9, p. 1, doi. 10.1007/s10965-021-02730-8
- By:
- Publication type:
- Article
Studies on crystallization kinetics, microstructure and mechanical properties of different short carbon fiber reinforced polypropylene (SCF/PP) composites.
- Published in:
- Journal of Polymer Research, 2013, v. 20, n. 10, p. 1, doi. 10.1007/s10965-013-0265-7
- By:
- Publication type:
- Article
Numerical investigation of vacuum-assisted resin transfer moulding (VARTM) within deformable fibre fabrics.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 479, doi. 10.1002/pamm.201610228
- By:
- Publication type:
- Article
Modeling of Carbon Fiber Reinforced Plastics for Wave Propagation Analysis in Plates.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2015, v. 15, n. 1, p. 323, doi. 10.1002/pamm.201510152
- By:
- Publication type:
- Article
Predicting delamination in multilayered CFRP laminates accounting for different failure modes.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2015, v. 15, n. 1, p. 231, doi. 10.1002/pamm.201510106
- By:
- Publication type:
- Article
Analysis of the influence of Spectral Elements for elastic wave propagation on the CFL-Condition.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2013, v. 13, n. 1, p. 181, doi. 10.1002/pamm.201310086
- By:
- Publication type:
- Article
Predicting the onset of delamination in layered fiber-reinforced composites.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2013, v. 13, n. 1, p. 177, doi. 10.1002/pamm.201310084
- By:
- Publication type:
- Article
A hybrid algorithm to optimize cutting parameter for machining GFRP composite using alumina cutting tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 59, n. 9-12, p. 1047, doi. 10.1007/s00170-011-3553-6
- By:
- Publication type:
- Article
Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core-saw drill.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 59, n. 5-8, p. 617, doi. 10.1007/s00170-011-3532-y
- By:
- Publication type:
- Article
A new volar plate made of carbon-fiber-reinforced polyetheretherketon for distal radius fracture: analysis of 40 cases.
- Published in:
- Journal of Orthopaedics & Traumatology, 2014, v. 15, n. 4, p. 277, doi. 10.1007/s10195-014-0311-1
- By:
- Publication type:
- Article
Preliminary design of an injection-molded recycled-carbon fiber–reinforced plastic/metal hybrid automotive structure via combined optimization techniques.
- Published in:
- Structural & Multidisciplinary Optimization, 2021, v. 64, n. 4, p. 2773, doi. 10.1007/s00158-021-02988-y
- By:
- Publication type:
- Article
Robust topology optimization for multiple fiber-reinforced plastic (FRP) composites under loading uncertainties.
- Published in:
- Structural & Multidisciplinary Optimization, 2019, v. 59, n. 3, p. 695, doi. 10.1007/s00158-018-2175-0
- By:
- Publication type:
- Article
An integrated optimization for laminate design and manufacturing of a CFRP wheel hub based on structural performance.
- Published in:
- Structural & Multidisciplinary Optimization, 2018, v. 57, n. 6, p. 2309, doi. 10.1007/s00158-017-1861-7
- By:
- Publication type:
- Article
Multi-criteria optimization of an aircraft propeller considering manufacturing.
- Published in:
- Structural & Multidisciplinary Optimization, 2017, v. 55, n. 3, p. 899, doi. 10.1007/s00158-016-1541-z
- By:
- Publication type:
- Article
Drilling optimization of woven CFRP laminates under different tool wear conditions: a multi-objective design of experiments approach.
- Published in:
- Structural & Multidisciplinary Optimization, 2016, v. 53, n. 2, p. 239, doi. 10.1007/s00158-015-1324-y
- By:
- Publication type:
- Article
The use of topology optimization in disposing carbon fiber reinforcement for concrete structures.
- Published in:
- Structural & Multidisciplinary Optimization, 2014, v. 49, n. 6, p. 1009, doi. 10.1007/s00158-013-1036-0
- By:
- Publication type:
- Article
EXTRA-ARTICULAR MANIFESTATIONS IN ANKYLOSING SPONDYLITIS: A SINGLE CENTER ANALYSIS IN WESTERN ALGERIA.
- Published in:
- Journal of Experimental Research, 2023, v. 11, n. 2, p. 79
- By:
- Publication type:
- Article
Investigation of the effect of the degree of hollowness and internal cavity structure on the mechanical properties of 3D-printed parts.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2024, v. 7, n. 1, p. 45, doi. 10.1016/j.ijlmm.2023.06.005
- By:
- Publication type:
- Article
Systematic analysis of fractured specimens of composite laminates: Different perspectives between tensile, flexural, Mode I, and Mode II test.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2023, v. 6, n. 3, p. 329, doi. 10.1016/j.ijlmm.2023.03.003
- By:
- Publication type:
- Article
Sustainable cooling/lubrication induced thermo-mechanical effects on ultrasonic vibration helical milling of CFRP/Tie6Ale4V stacks.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2023, v. 6, n. 3, p. 311, doi. 10.1016/j.ijlmm.2023.02.002
- By:
- Publication type:
- Article
Progressive optimization on structural design and weight reduction of CFRP key components.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2023, v. 6, n. 1, p. 59, doi. 10.1016/j.ijlmm.2022.07.001
- By:
- Publication type:
- Article
Numerical Analysis on the Bond Performance of Different Anchored Joints under Monotonic and Cyclic Pull-push Loading.
- Published in:
- Journal of Applied & Computational Mechanics, 2022, v. 8, n. 1, p. 388, doi. 10.22055/JACM.2021.38500.3266
- By:
- Publication type:
- Article
Finite Element Analysis on Hydroforming of CFRP/SS304 Composite Tube with different Fiber Orientation Stacking Sequence.
- Published in:
- Journal of Mechanical, Civil & Industrial Engineering, 2022, v. 3, n. 2, p. 17, doi. 10.32996/jmcie.2022.3.2.3
- By:
- Publication type:
- Article
Vibration Behaviors of Antisymmetric Fiber Metal Laminated Composite Plates.
- Published in:
- Gazi Journal of Engineering Sciences (GJES) / Gazi Mühendislik Bilimleri Dergisi, 2023, v. 9, n. 2, p. 264, doi. 10.30855/gmbd.0705069
- By:
- Publication type:
- Article
Enhanced Mechanical Property of Acrylic Polymer/Graphene/Carbon Fibers Hybrid for Water Proof Coating.
- Published in:
- Iraqi Journal of Physics, 2022, v. 20, n. 2, p. 1, doi. 10.30723/ijp.v20i2.982
- By:
- Publication type:
- Article
干法缠绕用碳纤维复合材料耐压支撑管 铺层优化设计.
- Published in:
- Plastics Science & Technology / Suliao Ke-Ji, 2024, v. 52, n. 6, p. 56, doi. 10.15925/j.cnki.issn1005-3360.2024.06.011
- By:
- Publication type:
- Article
酚酞型聚芳醚酮改性PPS/CF 复合材料的 制备与性能研究.
- Published in:
- Plastics Science & Technology / Suliao Ke-Ji, 2023, v. 51, n. 1, p. 56, doi. 10.15925/j.cnki.issn1005-3360.2023.01.011
- By:
- Publication type:
- Article
多层纤维增强环氧树脂复合材料结构设计与 电磁屏蔽效能预测模型.
- Published in:
- Plastics Science & Technology / Suliao Ke-Ji, 2023, v. 51, n. 1, p. 7, doi. 10.15925/j.cnki.issn1005-3360.2023.01.002
- By:
- Publication type:
- Article
Highly Efficient Recycling of Carbon Fiber Reinforced Composites by Pyrolysis with Superheated Steam and Their Properties.
- Published in:
- Silicone Material, 2022, v. 36, n. 4, p. 551, doi. 10.14136/j.cnki.issn1673-2812.2022.04.002
- By:
- Publication type:
- Article
ОЦІНКА МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ КОМПОЗИТІВ АРМОВАНОГО ВУГЛЕЦЕВИМ ВОЛОКНОМ ПЛАСТИКУ ТА МОДЕЛЮВАННЯ ЙОГО ВІДШАРУВАННЯ.
- Published in:
- Technical Diagnostics & Nondestructive Testing / Tekhnicheskaya Diagnostika I Nerazrushayushchiy Kontrol, 2024, n. 4, p. 13, doi. 10.37434/tdnk2024.04.02
- By:
- Publication type:
- Article
LASER-INDUCED THERMOELASTIC WAVE TECHNIQUE TO EVALUATE HYGROTHERMAL AGING IN CFRP COMPOSITES.
- Published in:
- Technical Diagnostics & Nondestructive Testing / Tekhnicheskaya Diagnostika I Nerazrushayushchiy Kontrol, 2021, n. 4, p. 41
- By:
- Publication type:
- Article
A Programmatic Approach to Pipeline Assessment and Rehabilitation Delivers Cost-Effective Solutions.
- Published in:
- Journal: American Water Works Association, 2017, v. 109, n. 1, p. 47, doi. 10.5942/jawwa.2017.109.0003
- By:
- Publication type:
- Article
IMPROVEMENT OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF CARBON FIBER REINFORCED PEEK COMPOSITE FILLED WITH CARBON NANOTUBES.
- Published in:
- Annales de Chimie Science des Matériaux, 2015, v. 39, n. 1/2, p. 1, doi. 10.3166/acsm.39.1-10
- By:
- Publication type:
- Article
Influence of Microwave Electromagnetic Field on Interlayer Strength in Cured Polymer Composite Materials.
- Published in:
- Technical Physics, 2024, v. 69, n. 7, p. 2194, doi. 10.1134/S1063784224070533
- By:
- Publication type:
- Article
Nanocarbon and macrocarbonaceous filler–reinforced epoxy/polyamide: A review.
- Published in:
- Journal of Thermoplastic Composite Materials, 2022, v. 35, n. 12, p. 2620, doi. 10.1177/0892705720930810
- By:
- Publication type:
- Article
Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications.
- Published in:
- Journal of Thermoplastic Composite Materials, 2021, v. 34, n. 11, p. 1443, doi. 10.1177/0892705719873941
- By:
- Publication type:
- Article
Influence of thread count of carbon twill textile-reinforced polyamide 66 laminates on the inductive heating behavior.
- Published in:
- Journal of Thermoplastic Composite Materials, 2021, v. 34, n. 8, p. 1135, doi. 10.1177/0892705719854493
- By:
- Publication type:
- Article
Investigation of carbon fiber–reinforced thermoplastic polymers using thermogravimetric analysis.
- Published in:
- Journal of Thermoplastic Composite Materials, 2021, v. 34, n. 1, p. 126, doi. 10.1177/0892705719839450
- By:
- Publication type:
- Article
Improvement of mechanical and physical properties of carbon fiber-reinforced polyamide composites by applying different surface coatings for short carbon fiber.
- Published in:
- Journal of Thermoplastic Composite Materials, 2020, v. 33, n. 4, p. 541, doi. 10.1177/0892705719877218
- By:
- Publication type:
- Article
A novel tab for tensile testing of unidirectional thermoplastic composites.
- Published in:
- Journal of Thermoplastic Composite Materials, 2019, v. 32, n. 1, p. 37, doi. 10.1177/0892705717743295
- By:
- Publication type:
- Article
Health condition evaluation of carbon fiber-reinforced thermoplastic with a tapping system.
- Published in:
- Journal of Thermoplastic Composite Materials, 2018, v. 31, n. 7, p. 959, doi. 10.1177/0892705717729196
- By:
- Publication type:
- Article
Analysis of void formation in thermoplastic composites during resistance welding.
- Published in:
- Journal of Thermoplastic Composite Materials, 2017, v. 30, n. 12, p. 1654, doi. 10.1177/0892705716662514
- By:
- Publication type:
- Article
Quantification of the void content of composite materials using soft X-ray transmittance.
- Published in:
- Journal of Thermoplastic Composite Materials, 2017, v. 30, n. 11, p. 1522, doi. 10.1177/0892705716644670
- By:
- Publication type:
- Article
Determination of void statistics and statistical representative volume elements in carbon fiber-reinforced thermoplastic prepregs.
- Published in:
- Journal of Thermoplastic Composite Materials, 2017, v. 30, n. 8, p. 1103, doi. 10.1177/0892705715618002
- By:
- Publication type:
- Article
Preparation of carbon fiber-reinforced thermoplastics with high fiber volume fraction and high heat-resistant properties.
- Published in:
- Journal of Thermoplastic Composite Materials, 2017, v. 30, n. 5, p. 724, doi. 10.1177/0892705715610408
- By:
- Publication type:
- Article
Thermoplastic carbon fibre-reinforced polymer recycling with electrodynamical fragmentation.
- Published in:
- Journal of Thermoplastic Composite Materials, 2017, v. 30, n. 3, p. 381, doi. 10.1177/0892705715599431
- By:
- Publication type:
- Article
Accelerated aging effects on carbon fiber PEKK composites manufactured by hot compression molding.
- Published in:
- Journal of Thermoplastic Composite Materials, 2016, v. 29, n. 10, p. 1429, doi. 10.1177/0892705714564283
- By:
- Publication type:
- Article