Works matching DE "ELASTIC modulus"
Results: 5000
Behavior of Foreign Interstitial Hydrogen and Helium Atoms at Tungsten/Beryllium Interface from First-Principles Calculations.
- Published in:
- Fusion Science & Technology, 2025, v. 81, n. 3, p. 191, doi. 10.1080/15361055.2024.2369828
- By:
- Publication type:
- Article
A novel approach to investigate the mechanical properties of the material for bridge health monitoring using convolutional neural network.
- Published in:
- Structure & Infrastructure Engineering: Maintenance, Management, Life-Cycle Design & Performance, 2024, v. 20, n. 6, p. 846, doi. 10.1080/15732479.2022.2127792
- By:
- Publication type:
- Article
The effect of sulfur to accelerator ratio on the adhesion strength of NR/SBR blend to bronze-plated bead wire in sulfur curing systems.
- Published in:
- Journal of Adhesion, 2025, v. 101, n. 5, p. 707, doi. 10.1080/00218464.2024.2386473
- By:
- Publication type:
- Article
Experimental approach for measuring the peeling strength of a sheet bonded on a curved adherend with pressure sensitive adhesive and predicting the peeling resistance by finite element analysis.
- Published in:
- Journal of Adhesion, 2024, v. 100, n. 16, p. 1554, doi. 10.1080/00218464.2024.2334340
- By:
- Publication type:
- Article
Dynamic Calibration of the Transverse Elastic Modulus of Shredded Rubber for Use in Seismic Isolation.
- Published in:
- Structural Engineering International, 2024, v. 34, n. 2, p. 233, doi. 10.1080/10168664.2023.2274462
- By:
- Publication type:
- Article
Evaluation of Hardness and Elastic Modulus of Polymer Materials Through Micro-Scratch Method: An Empirical Study.
- Published in:
- Polymer-Plastics Technology & Materials, 2025, v. 64, n. 4, p. 574, doi. 10.1080/25740881.2024.2420788
- By:
- Publication type:
- Article
Evaluation and prediction of bending properties of glulam beams made from young plantation-grown Eucalyptus nitens.
- Published in:
- Australian Forestry, 2024, v. 87, n. 3, p. 114, doi. 10.1080/00049158.2024.2377233
- By:
- Publication type:
- Article
Experimental and Parametric Study on Rotational Performance of Through-Tenon Joints in Traditional Timber Structures.
- Published in:
- International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2025, v. 19, n. 3, p. 293, doi. 10.1080/15583058.2023.2284745
- By:
- Publication type:
- Article
Combined Finite-Discrete Element Model Simulations of Shake-Table Tests on a Full-Scale Masonry Cross Vault.
- Published in:
- International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2024, v. 18, n. 12, p. 1900, doi. 10.1080/15583058.2024.2317455
- By:
- Publication type:
- Article
Experimental and Numerical Study on the Mechanical Performance of Dou-Gong Bracket at the Corner under Vertical Load.
- Published in:
- International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2024, v. 18, n. 4, p. 526, doi. 10.1080/15583058.2023.2169209
- By:
- Publication type:
- Article
Experimental Study on the Compressive Behaviors of Traditional Tibetan Three-Leaf Walls.
- Published in:
- International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2024, v. 18, n. 2, p. 279, doi. 10.1080/15583058.2022.2142697
- By:
- Publication type:
- Article
Valorization of Sugarcane Leaf to Binderless Fiberboards by Hot‐Pressing Process and Polyurethane Coating.
- Published in:
- Chemical Engineering & Technology, 2025, v. 48, n. 2, p. 1, doi. 10.1002/ceat.202400064
- By:
- Publication type:
- Article
Hybrid intelligence framework for optimizing shear capacity of lightweight FRP-reinforced concrete beams.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2025, v. 8, n. 1, p. 14, doi. 10.1016/j.ijlmm.2024.07.003
- By:
- Publication type:
- Article
The effect of ultrasonic and low-frequency vibrations during pressing on the morphology and tribological properties of a polymer composite.
- Published in:
- Journal of Mechanical Science & Technology, 2025, v. 39, n. 3, p. 1141, doi. 10.1007/s12206-025-0210-9
- By:
- Publication type:
- Article
A robust hybrid reliability index solution approach for a novel reliability digital twin updating process framework of composite structures.
- Published in:
- Journal of Mechanical Science & Technology, 2025, v. 39, n. 3, p. 1103, doi. 10.1007/s12206-025-0208-3
- By:
- Publication type:
- Article
Effect of Quaternary Ammonium‐Based Antimicrobial Coating on the Mechanical Properties and Bacterial Adhesion to Gummetal Archwire.
- Published in:
- International Journal of Dentistry, 2025, v. 2025, n. 1, p. 1, doi. 10.1155/ijod/8157347
- By:
- Publication type:
- Article
Enhancing structural integrity of magnesium with hydroxyapatite and tantalum reinforcement.
- Published in:
- Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-91912-1
- By:
- Publication type:
- Article
Effects of Carbonated Drinks on Mechanical Properties of Three Types of Thermoplastic Aligner Materials: An In vitro Study.
- Published in:
- Journal of Indian Orthodontic Society, 2020, v. 54, n. 2, p. 115, doi. 10.1177/0301574219892421
- By:
- Publication type:
- Article
SUBSTRATE EFFECT IN THE EVALUATION OF ELASTIC MODULUS OF THIN PVD COATINGS FROM NANOINDENTATION.
- Published in:
- Acta Polytechnica CTU Proceedings, 2024, v. 50, p. 36, doi. 10.14311/APP.2024.50.0036
- By:
- Publication type:
- Article
超临界 CO<sub>2</sub> 脉动作用对低阶煤微观－宏观结构损伤演化 特征研究.
- Published in:
- Coal Science & Technology (0253-2336), 2025, v. 53, n. 2, p. 188, doi. 10.12438/cst.2024-0758
- By:
- Publication type:
- Article
动载下含内部裂隙类岩体力学响应与能量耗散规律.
- Published in:
- Coal Science & Technology (0253-2336), 2025, v. 53, n. 2, p. 136, doi. 10.12438/cst.2024-1409
- By:
- Publication type:
- Article
高温后砂岩真三轴加卸载力学特性演化规律.
- Published in:
- Coal Science & Technology (0253-2336), 2025, v. 53, n. 2, p. 123, doi. 10.12438/cst.2024-0340
- By:
- Publication type:
- Article
Deformation and energy damage characteristics of granite-concrete composite under uniaxial compression.
- Published in:
- PLoS ONE, 2025, v. 20, n. 3, p. 1, doi. 10.1371/journal.pone.0316124
- By:
- Publication type:
- Article
Application of a Piezoelectric Resonator for Reconstructing the Parameters of a Contacting Liquid.
- Published in:
- Acoustical Physics, 2024, v. 70, n. 6, p. 946, doi. 10.1134/S106377102460205X
- By:
- Publication type:
- Article
DETERMINING TECHNOLOGICAL PARAMETERS FOR THE ADDITIVE ELECTRON-BEAM SURFACING OF BLANKS FOR MEDICAL IMPLANTS MADE OF ZR-TI-NB ALLOY.
- Published in:
- Eastern-European Journal of Enterprise Technologies, 2025, v. 133, n. 12, p. 16, doi. 10.15587/1729-4061.2025.322118
- By:
- Publication type:
- Article
Field and 3D numerical investigation on bearing characteristics of the long-core SDCM piles under vertical load in sandy soil.
- Published in:
- Acta Geotechnica, 2025, v. 20, n. 3, p. 1341, doi. 10.1007/s11440-025-02533-x
- By:
- Publication type:
- Article
Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part II: Coatings enhance cell proliferation, corrosion resistance and implant integration.
- Published in:
- Johnson Matthey Technology Review, 2025, v. 69, n. 1, p. 59, doi. 10.1595/205651325X17290035905758
- By:
- Publication type:
- Article
Selected properties of MDF boards bonded with various contents of recycled PLA foil bags.
- Published in:
- Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology, 2024, n. 128, p. 49, doi. 10.5604/01.3001.0055.0001
- By:
- Publication type:
- Article
Energy evolution and damage ontology modeling of coal destruction at different water contents.
- Published in:
- PLoS ONE, 2025, v. 20, n. 3, p. 1, doi. 10.1371/journal.pone.0316941
- By:
- Publication type:
- Article
Characterization of Olive Seed Powder Incorporated Low Density Polyethylene Composites.
- Published in:
- Sakarya University Journal of Science (SAUJS) / Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2025, v. 29, n. 1, p. 71, doi. 10.16984/saufenbilder.1589003
- By:
- Publication type:
- Article
Structural Parameters and Elastic Constants of Lithium-doped Boron Nitride Nanoribbons: A First Principle Study.
- Published in:
- Semiconductors, 2025, v. 59, n. 1, p. 70, doi. 10.1134/S1063782624600748
- By:
- Publication type:
- Article
Evolution of Elastic Shear Modulus During Shearing Under Different Stress Paths Considering Anisotropic Stress History.
- Published in:
- Journal of Earthquake & Tsunami, 2025, v. 19, n. 1, p. 1, doi. 10.1142/S1793431124500118
- By:
- Publication type:
- Article
Experimental Study of Effect of Infill Density on Tensile and Compressive Behaviors of Poly Lactic Acid (PLA) Prepered by 3D Printed (FDM).
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 1, p. 97, doi. 10.18280/rcma.350112
- By:
- Publication type:
- Article
Consensus Recommendations for the Reconstitution and Aesthetic Use of Poly-D,L-Lactic Acid Microspheres – Comment on the Facial Injection Techniques [Letter].
- Published in:
- Clinical, Cosmetic & Investigational Dermatology, 2025, v. 18, p. 287, doi. 10.2147/CCID.S516035
- By:
- Publication type:
- Article
Study on the damage constitutive characteristics of coal-rock composites under uniaxial compression: Influence of prefabricated crack angle and geometric dimensions.
- Published in:
- PLoS ONE, 2025, v. 20, n. 3, p. 1, doi. 10.1371/journal.pone.0316586
- By:
- Publication type:
- Article
The interaction of Galectin-8 C-terminal domain with cell surface glycoconjugates modulates membrane elasticity to stimulate antigen uptake and presentation to CD4 T cells.
- Published in:
- Journal of Leukocyte Biology, 2025, v. 117, n. 2, p. 1, doi. 10.1093/jleuko/qiae214
- By:
- Publication type:
- Article
EXPERIMENTAL STUDY ON DYNAMIC ELASTIC MODULUS AND BONDING PROPERTIES OF REINFORCED CONCRETE BRIDGE DECK PANELS IN SALT-FREEZE ENVIRONMENT.
- Published in:
- Civil Engineering Journal, 2024, v. 33, n. 4, p. 560, doi. 10.14311/CEJ.2024.04.0038
- By:
- Publication type:
- Article
Shear Strengthening of Hollow-Core Slabs with Structural Openings.
- Published in:
- Concrete International, 2025, v. 47, n. 3, p. 55
- By:
- Publication type:
- Article
Comprehensive analysis of the compressive behavior of Fischer-Koch-S, F-RD, and neovius TPMS cellular structures in 3D-printed PLA specimens.
- Published in:
- Journal of Elastomers & Plastics, 2025, v. 57, n. 3, p. 315, doi. 10.1177/00952443251314797
- By:
- Publication type:
- Article
牦牛枸杞酸奶发酵工艺优化及冻融处理次数对其品质的影响.
- Published in:
- China Brewing, 2025, v. 44, n. 2, p. 164, doi. 10.11882/j.issn.0254-5071.2025.02.024
- By:
- Publication type:
- Article
Study of the Generalized Curves of the Static and Cyclic Deformation, Damage, and Fracture.
- Published in:
- Inorganic Materials, 2024, v. 60, n. 2, p. 147, doi. 10.1134/S0020168524700195
- By:
- Publication type:
- Article
Influence of the Scale Factor on the Young's Modulus of Steel Determined by the Tensile Strength of the Specimens.
- Published in:
- Inorganic Materials, 2024, v. 60, n. 2, p. 172, doi. 10.1134/S0020168524700225
- By:
- Publication type:
- Article
Synthesis and characterization of an injectable, self-healing hydrogel based on succinyl chitosan, oxidized pectin, and cellulose nanofiber for biomedical applications.
- Published in:
- Journal of Polymer Research, 2025, v. 32, n. 2, p. 1, doi. 10.1007/s10965-025-04283-6
- By:
- Publication type:
- Article
Prediction of the mechanical properties for 3D printed rapid prototypes based on artificial neural network.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 3, p. 96, doi. 10.12913/22998624/197405
- By:
- Publication type:
- Article
Evaluation of the mechanical performance of iron – polymethyl methacrylate and polystyrene polymer products based on alumina nanomaterials.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 3, p. 202, doi. 10.12913/22998624/199471
- By:
- Publication type:
- Article
Preparation of phthalonitrile resin/calcium sulfate whisker composites with enhanced wear and heat resistance.
- Published in:
- High Performance Polymers, 2025, v. 37, n. 2, p. 88, doi. 10.1177/09540083241309065
- By:
- Publication type:
- Article
The effects of restorative material and connector cross-section area on the stress distribution of fixed partial denture: a finite element analysis.
- Published in:
- Head & Face Medicine, 2025, v. 21, n. 1, p. 1, doi. 10.1186/s13005-025-00484-y
- By:
- Publication type:
- Article
Comparison of surface layers responses under heavy truck loadings on new and rehabilitated pavement with different interface bond conditions.
- Published in:
- Canadian Journal of Civil Engineering, 2025, v. 52, n. 3, p. 300, doi. 10.1139/cjce-2024-0105
- By:
- Publication type:
- Article
Research on the mechanical properties and micro damage mechanism of water bearing sandstone under uniaxial compression.
- Published in:
- Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-91736-z
- By:
- Publication type:
- Article
Microwave Thermal Treatment on Enhanced Cemented Tailings Backfill: An Experimental Study.
- Published in:
- Minerals (2075-163X), 2025, v. 15, n. 2, p. 115, doi. 10.3390/min15020115
- By:
- Publication type:
- Article