Works matching DE "IMPACT testing of metals"
Results: 104
Low velocity response of a complex geometry pultruded glass/polyester composite.
- Published in:
- Journal of Materials Science, 1999, v. 34, n. 5, p. 1107, doi. 10.1023/A:1004564516181
- By:
- Publication type:
- Article
Effect of the Velocity of a Single Flying Plate on the Protection Capability Against Obliquely Impacting Long‐Rod Penetrators.
- Published in:
- Combustion, Explosion, & Shock Waves, 2003, v. 39, n. 5, p. 591, doi. 10.1023/A:1026174121427
- By:
- Publication type:
- Article
Experimental investigation of low velocity impact on textile cellular composite with different energy construction.
- Published in:
- Journal of Industrial Textiles, 2019, v. 48, n. 6, p. 1009, doi. 10.1177/1528083718754900
- By:
- Publication type:
- Article
EQUIVALENT CHARPY-V IMPACT CRITERIA FOR NODULAR CAST IRON.
- Published in:
- International Journal of Metalcasting, 2014, v. 8, n. 2, p. 81, doi. 10.1007/BF03355584
- By:
- Publication type:
- Article
THE KINEMATIC AND DYNAMIC PERFORMANCES OF THE LOADING MECHANISM OF THE HIP JOINT WEAR SIMULATOR.
- Published in:
- Annals of DAAAM & Proceedings, 2011, p. 595
- By:
- Publication type:
- Article
Drop-weight tear test application to natural gas pipeline fracture control.
- Published in:
- Journal of Pipeline Engineering, 2013, v. 12, n. 3, p. 175
- By:
- Publication type:
- Article
Theory and practice of cushion curve: A supplementary discussion.
- Published in:
- Packaging Technology & Science, 2019, v. 32, n. 4, p. 185, doi. 10.1002/pts.2427
- By:
- Publication type:
- Article
Influence of the length of the internal sleeve valve on the release of powdery substances from the closures of valved bags for dangerous goods.
- Published in:
- Packaging Technology & Science, 2018, v. 31, n. 8, p. 532, doi. 10.1002/pts.2377
- By:
- Publication type:
- Article
On The Performance of Mechanical Shock Indicators.
- Published in:
- Packaging Technology & Science, 2017, v. 30, n. 6, p. 257, doi. 10.1002/pts.2297
- By:
- Publication type:
- Article
Statistical Analysis of Mechanical-Shock Fragility Test Results.
- Published in:
- Packaging Technology & Science, 2017, v. 30, n. 4, p. 145, doi. 10.1002/pts.2290
- By:
- Publication type:
- Article
Damage detection on laminated composite materials using several NDT techniques.
- Published in:
- Insight: Non-Destructive Testing & Condition Monitoring, 2012, v. 54, n. 1, p. 14, doi. 10.1784/insi.2012.54.1.14
- By:
- Publication type:
- Article
THE NATURE OF STEAL DESTRUCTION AT IMPULSIVE LOADING.
- Published in:
- Naukovi visti NTUU - KPI, 2009, v. 2009, n. 4, p. 85
- By:
- Publication type:
- Article
INTERLAMINAR AND INTRALAMINAR DAMAGE MECHANISMS OF IMPACT RESISTANT AIRCRAFT MATERIALS UNDER LOW-ENERGY IMPACT.
- Published in:
- Aviation (1648-7788), 2006, v. 10, n. 3, p. 3, doi. 10.3846/16487788.2006.9635933
- By:
- Publication type:
- Article
Low-Elevation Impact Tests of Axially Loaded Reinforced Concrete Columns.
- Published in:
- ACI Structural Journal, 2019, v. 116, n. 1, p. 117, doi. 10.14359/51710862
- By:
- Publication type:
- Article
Calibration of machine deformation for quasistatic fracture toughness testing at high temperatures.
- Published in:
- Materials Science & Technology, 2009, v. 25, n. 1, p. 85, doi. 10.1179/174328408X269088
- By:
- Publication type:
- Article
Effect of γ irradiation on the impact response of rigid polyurethane foam.
- Published in:
- Journal of Polymer Engineering, 2016, v. 36, n. 8, p. 829, doi. 10.1515/polyeng-2015-0360
- By:
- Publication type:
- Article
FE analysis of refrigerator drop test and the optimization of lower hinge geometry using equivalent static load method.
- Published in:
- Journal of Mechanical Science & Technology, 2018, v. 32, n. 11, p. 5279, doi. 10.1007/s12206-018-1026-7
- By:
- Publication type:
- Article
Influence of alloying elements on the mechanical properties of high-strength weld metal.
- Published in:
- Science & Technology of Welding & Joining, 2017, v. 22, n. 6, p. 536, doi. 10.1080/13621718.2016.1274095
- By:
- Publication type:
- Article
Experimental investigation of the mechanical performances of titanium cranial prostheses manufactured by super plastic forming and single-point incremental forming.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2018, v. 98, n. 5-8, p. 1489, doi. 10.1007/s00170-018-2338-6
- By:
- Publication type:
- Article
Investigation of manufacturing periodic cellular metal by sheet metal forming and its impact behavior.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 91, n. 5-8, p. 2561, doi. 10.1007/s00170-016-9973-6
- By:
- Publication type:
- Article
On determining the parameters of the kinetic equation of rock durability using the measurement data on tensile strength at different loading rates.
- Published in:
- Journal of Mining Science, 2006, v. 42, n. 3, p. 210, doi. 10.1007/s10913-006-0049-0
- By:
- Publication type:
- Article
Experimental Verification of Drop/Impact Simulation for a Cellular Phone.
- Published in:
- Experimental Mechanics, 2004, v. 44, n. 4, p. 375, doi. 10.1007/BF02428090
- By:
- Publication type:
- Article
Numerical Simulation of the Taylor Impact Test for Laser Powder Bed Fusion Parts Based on Microstructural Internal State Variables.
- Published in:
- Applied Sciences (2076-3417), 2023, v. 13, n. 9, p. 5372, doi. 10.3390/app13095372
- By:
- Publication type:
- Article
The Fragmentation-Energy Fan Concept and the Swebrec Function in Modeling Drop Weight Testing.
- Published in:
- Rock Mechanics & Rock Engineering, 2018, v. 51, n. 10, p. 3129, doi. 10.1007/s00603-018-1458-5
- By:
- Publication type:
- Article
3D FEM Simulations of Drop Test Reliability on 3D-WLP: Effects of Solder Reflow Residual Stress and Molding Resin Parameters.
- Published in:
- Journal of Electronic Materials, 2014, v. 43, n. 3, p. 708, doi. 10.1007/s11664-013-2964-6
- By:
- Publication type:
- Article
Impact Testing of Sn-3.0Ag-0.5Cu Solder with Ti/Ni(V)/Cu Under Bump Metallization After Aging at 150°C.
- Published in:
- Journal of Electronic Materials, 2010, v. 39, n. 12, p. 2558, doi. 10.1007/s11664-010-1370-6
- By:
- Publication type:
- Article
Study of the Impact Performance of Solder Joints by High-Velocity Impact Tests.
- Published in:
- Journal of Electronic Materials, 2010, v. 39, n. 12, p. 2536, doi. 10.1007/s11664-010-1369-z
- By:
- Publication type:
- Article
High-Speed Cyclic Bend Tests and Board-Level Drop Tests for Evaluating the Robustness of Solder Joints in Printed Circuit Board Assemblies.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 6, p. 884, doi. 10.1007/s11664-008-0610-5
- By:
- Publication type:
- Article
Predicting the Drop Performance of Solder Joints by Evaluating the Elastic Strain Energy from High-Speed Ball Pull Tests.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 3, p. 410, doi. 10.1007/s11664-008-0633-y
- By:
- Publication type:
- Article
Impact Behavior of Textile and Hybrid Cement-Based Composites.
- Published in:
- ACI Materials Journal, 2012, v. 109, n. 2, p. 244
- Publication type:
- Article
Impact Fatigue of a Polycarbonate/Acrylonitrile-Butadiene-Styrene Blend.
- Published in:
- Polymer Engineering & Science, 1999, v. 39, n. 4, p. 708, doi. 10.1002/pen.11459
- By:
- Publication type:
- Article
A New Drop-Weight Impact Machine for Studying Fracture Processes in Structural Concrete.
- Published in:
- Strain, 2010, v. 46, n. 3, p. 252, doi. 10.1111/j.1475-1305.2008.00574.x
- By:
- Publication type:
- Article
Impact damage testing on composite marine sandwich panels. Part 2: Instrumented drop weight.
- Published in:
- Journal of Sandwich Structures & Materials, 2014, v. 16, n. 5, p. 443, doi. 10.1177/1099636214535167
- By:
- Publication type:
- Article
Drop weight testing on sandwich panels with a novel thermoplastic core material.
- Published in:
- Journal of Sandwich Structures & Materials, 2012, v. 14, n. 3, p. 325, doi. 10.1177/1099636212444748
- By:
- Publication type:
- Article
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DUAL-PHASE STEEL.
- Published in:
- Archives of Metallurgy & Materials, 2014, v. 59, n. 4, p. 1257, doi. 10.2478/amm-2014-0215
- By:
- Publication type:
- Article
Study on the Selection of Comminution Circuits for a Magnetite Ore in Eastern Hebei, China.
- Published in:
- Minerals (2075-163X), 2016, v. 6, n. 2, p. 39, doi. 10.3390/min6020039
- By:
- Publication type:
- Article
Determination of dynamic rotation factor for DWTT specimens by strain analysis and hardness measurement.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 7, p. 830, doi. 10.1111/ffe.12397
- By:
- Publication type:
- Article
Manufacture of centrifugal cast high speed steel rolls for wire rod mills.
- Published in:
- Ironmaking & Steelmaking, 2004, v. 31, n. 5, p. 389, doi. 10.1179/030192304225019252
- By:
- Publication type:
- Article
Impact Response and Strength Reliability of Green High Performance Fibre Reinforced Concrete Subjected to Freeze-thaw Cycles in NaCl Solution.
- Published in:
- Materials Science / Medziagotyra, 2017, v. 23, n. 4, p. 384, doi. 10.5755/j01.ms.23.4.17334
- By:
- Publication type:
- Article
STUDY OF CUTTING AERIAL PMMA WITH MINIATURE DETONATION CORD.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2008, v. 22, n. 31/32, p. 5566, doi. 10.1142/S0217979208050826
- By:
- Publication type:
- Article
A STUDY ON THE BEHAVIOR OF A THIN STS 304 SHEET WITH A FREE BOUNDARY CONDITIONS SUBJECTED TO IMPACT LOADING.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2008, v. 22, n. 31/32, p. 5572, doi. 10.1142/S0217979208050838
- By:
- Publication type:
- Article
EFFECTS OF IMPACT VELOCITY AND SLENDERNESS RATIO ON DYNAMIC BUCKLING LOAD FOR LONG COLUMNS.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2008, v. 22, n. 31/32, p. 5596, doi. 10.1142/S0217979208050875
- By:
- Publication type:
- Article
RESIDUAL STRENGTH OF SANDWICH STRUCTURE SUBJECTED TO LOW VELOCITY IMPACT.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2006, v. 20, n. 25-27, p. 4384, doi. 10.1142/S0217979206041392
- By:
- Publication type:
- Article
TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLEN AlSi7 KÖPÜKLERİN DÜŞÜK HIZLI DARBE ENERJİLERİ ALTINDA PENETRASYON DAVRANIŞININ İNCELENMESİ.
- Published in:
- Journal of the Faculty of Engineering & Architecture of Gazi University / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi,, 2014, v. 29, n. 2, p. 395
- By:
- Publication type:
- Article
Innovative Testing Machines and Methodologies for the Mechanical Characterization of Materials.
- Published in:
- Experimental Techniques, 2016, v. 40, n. 2, p. 569, doi. 10.1007/s40799-016-0058-0
- By:
- Publication type:
- Article
Experiment and Simulation in Design of the Board-Level Drop Testing Tower Apparatus.
- Published in:
- Experimental Techniques, 2012, v. 36, n. 2, p. 60, doi. 10.1111/j.1747-1567.2011.00755.x
- By:
- Publication type:
- Article
Is there any effect in impact testing when hitting harder or softer with the different tips?
- Published in:
- Experimental Techniques, 2010, v. 34, n. 2, p. 13, doi. 10.1111/j.1747-1567.2010.00627.x
- By:
- Publication type:
- Article
Experimental Splash Studies of Monodisperse Sprays Impacting Variously Shaped Surfaces.
- Published in:
- Drying Technology, 2009, v. 27, n. 2, p. 258, doi. 10.1080/07373930802606188
- By:
- Publication type:
- Article
A CRITICAL REVIEW: SURFACE AND INTERFACIAL TENSION MEASUREMENT BY THE DROP WEIGHT METHOD.
- Published in:
- Chemical Engineering Communications, 2008, v. 195, n. 8, p. 889, doi. 10.1080/00986440801905056
- By:
- Publication type:
- Article
Low-velocity impact responses of Napier fibre/polyester composites.
- Published in:
- International Journal of Automotive & Mechanical Engineering, 2016, v. 13, n. 1, p. 3226, doi. 10.15282/ijame.13.1.2016.9.0269
- By:
- Publication type:
- Article