Found: 62
Select item for more details and to access through your institution.
Toward a low‐temperature sintering of carbon fiber toughened high entropy boride composite with Co addition.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14943
- By:
- Publication type:
- Article
Effects of microstructures on the fracture properties of silicon nitride ceramics at elevated temperatures.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14942
- By:
- Publication type:
- Article
Alkali‐activated rice husk ash‐foamed composites: Correlation between pore structure, hydration, and hardening properties.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14941
- By:
- Publication type:
- Article
Microstructure and electrical properties of aluminum oxide‐reinforced 3 mol% yttria‐stabilized tetragonal zirconia polycrystals/TiSi<sub>2</sub> composites by vacuum sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14938
- By:
- Publication type:
- Article
Development and validation of damage and failure models for the design of ceramic matrix composite components.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14927
- By:
- Publication type:
- Article
The influence of components on the high‐temperature performance and cutting performance of Si<sub>3</sub>N<sub>4</sub>‐based ceramic tools.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14924
- By:
- Publication type:
- Article
Influence of polypropylene fiber on the explosion resistance and fracture behavior of alumina–spinel castables.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14923
- By:
- Publication type:
- Article
Alumina densification at low temperatures using CaV<sub>2</sub>O<sub>6</sub> for LTCC application.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14922
- By:
- Publication type:
- Article
Enhancement of strength and thermal shock resistance of MgO‐MgAl<sub>2</sub>O<sub>4</sub> ceramic filters with microporous MgO powder: Effect of α‐Al<sub>2</sub>O<sub>3</sub> micro‐powder content.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14921
- By:
- Publication type:
- Article
Comparison of corrosion behavior of primary/modified nickel slag with semi‐rebonded periclase‐chromite refractory.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14917
- By:
- Publication type:
- Article
Synthesis and characterization of the doped/co‐doped SnO<sub>2</sub> nanoparticles by the sol–gel method.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14916
- By:
- Publication type:
- Article
Slurry material extrusion of chopped carbon fiber reinforced silicon carbide ceramic matrix composites (CMCs).
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14915
- By:
- Publication type:
- Article
Hydrothermal corrosion behavior of CrN/Cr<sub>2</sub>N‐ZrN ceramic as a surrogate nuclear fuel.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14914
- By:
- Publication type:
- Article
Lightning damage characteristics of C<sub>f</sub>/SiC based on ultrasonic and multi‐nondestructive testing methods.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14913
- By:
- Publication type:
- Article
Optimization of tribocatalytic performance by modifying the concentration of oxygen vacancies in KSr<sub>2</sub>Nb<sub>4</sub>TaO<sub>15</sub> ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14912
- By:
- Publication type:
- Article
Improvement of BGO ceramic scintillators through hot‐pressing sintering methodology.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14911
- By:
- Publication type:
- Article
Bi<sub>2</sub>S<sub>3</sub> nanorods supported on eggshell membrane electrodes for supercapacitor applications.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14910
- By:
- Publication type:
- Article
Fabrication and characterization of silicon carbide ceramic filtration media via recycling of waste red mud.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14908
- By:
- Publication type:
- Article
The effect of MnO<sub>2</sub> additive on the microstructure and mechanical properties of magnesium aluminate spinel.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14907
- By:
- Publication type:
- Article
Piezo‐biphasic scaffold based on polycaprolactone containing BaTiO<sub>3</sub> and hydroxyapatite nanoparticles using three‐dimensional printing for bone regeneration.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14906
- By:
- Publication type:
- Article
Novel method of fabricating lightweight thermally insulation fibrous composites for energy saving.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14905
- By:
- Publication type:
- Article
Effect of the SiC powder microscopic morphology on properties of Si/SiC ceramics prepared by spark plasma sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14904
- By:
- Publication type:
- Article
Oxidation behavior of SiC‐AlN ceramics exposed to dry oxygen and water oxygen environments at 1100–1300°C.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14903
- By:
- Publication type:
- Article
Ultrahigh‐temperature tensile behaviors of ZrB<sub>2</sub>–SiC ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14901
- By:
- Publication type:
- Article
Cr<sub>2</sub>AlC ceramic–modified carbon/quartz fiber composites with enhanced ablation resistance and thermal insulation.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14900
- By:
- Publication type:
- Article
Investigating the effect of polymer additives on the rheology of SiC/clay paste for use in Direct Ink Writing method.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14899
- By:
- Publication type:
- Article
Functionally graded Al<sub>2</sub>O<sub>3</sub>‐based ceramic systems by gel casting method.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14898
- By:
- Publication type:
- Article
Materials for improved lifetime of saggar in production of Li‐ion cathode powders.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14897
- By:
- Publication type:
- Article
Microstructure and tribological properties of CrVN thin film coated WC‐Co tool after boriding process.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14896
- By:
- Publication type:
- Article
Enhancing the mechanical properties of Al<sub>2</sub>O<sub>3</sub>‐C refractory: Carbonized coconut shell as a substitution for graphite.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14895
- By:
- Publication type:
- Article
Hydration mechanism of hydrated magnesium citrate: The effects of MgCl<sub>2</sub>.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14894
- By:
- Publication type:
- Article
Does a relationship exist between hardness and compression strength for advanced ceramics?
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14893
- By:
- Publication type:
- Article
Energy storage behaviors and synchronously electric modulations of photoluminescence in Er/Yb‐codoped Pb<sub>0.96</sub>La<sub>0.04</sub>Zr<sub>0.90</sub>Ti<sub>0.10</sub>O<sub>3</sub> and AgNbO<sub>3</sub> antiferroelectrics: A noncontact charge/discharge monitoring method
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14892
- By:
- Publication type:
- Article
Composition optimization of (Hf, Ta, Zr, Cr)C high‐entropy carbides for good oxidation resistance.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14891
- By:
- Publication type:
- Article
Property dependence on particle size and sintering temperature of waste porcelain high‐temperature resistant material.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14890
- By:
- Publication type:
- Article
The crack‐healing behavior and oxidation resistance of Al<sub>2</sub>O<sub>3</sub>–ZrO<sub>2</sub>–SiB<sub>6</sub> ceramic at 600–1200°C.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14889
- By:
- Publication type:
- Article
Preparation and optimization of silicon nitride slurries for digital light processing.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14888
- By:
- Publication type:
- Article
Thermal shock resistance of additively manufactured alumina.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14887
- By:
- Publication type:
- Article
A novel route to synthesize B<sub>6</sub>O powder via reaction between CaB<sub>6</sub> and B<sub>2</sub>O<sub>3</sub>.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14886
- By:
- Publication type:
- Article
Strength comparison for fully dense zirconium diboride ceramics tested by different methods.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14885
- By:
- Publication type:
- Article
Thrombogenicity, DPPH assay, and MTT assay of sol–gel derived 3% silver‐doped hydroxyapatite for hard tissue implants.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14884
- By:
- Publication type:
- Article
Assessing porosity limit in freeze‐cast sintered lithium titanate (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>) materials.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14883
- By:
- Publication type:
- Article
Hot corrosion behaviors of Sc<sub>2</sub>O<sub>3</sub>–Gd<sub>2</sub>O<sub>3</sub>–Y<sub>2</sub>O<sub>3</sub> co‐doped ZrO<sub>2</sub> in Na<sub>2</sub>SO<sub>4</sub> + V<sub>2</sub>O<sub>5</sub> molten salts at 1000°C.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14882
- By:
- Publication type:
- Article
Brazing mechanism and shear strength of SiAlON/WC‐Co joint using Ag–Cu–Ti active filler.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14881
- By:
- Publication type:
- Article
Improved precision and mechanical properties of 3D‐printed silica ceramics via sintering temperature optimization.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14880
- By:
- Publication type:
- Article
Mechanical, thermophysical, and ablation properties of C/HfC–SiC composites with various SiC/HfC ratios.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14878
- By:
- Publication type:
- Article
Effect of silicon carbide content on microstructure, physical and mechanical properties in vat photopolymerization of alumina.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14877
- By:
- Publication type:
- Article
Novel approach for predicting the creep behavior of ceramic fibers using dimensional analysis.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14876
- By:
- Publication type:
- Article
Dynamic bending analysis of metallized silicon nitride substrate during thermal cycling via digital image correlation.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14875
- By:
- Publication type:
- Article
Sea/coral sand in marine engineered geopolymer composites: Engineering, mechanical, and microstructure properties.
- Published in:
- International Journal of Applied Ceramic Technology, 2025, v. 22, n. 1, p. 1, doi. 10.1111/ijac.14874
- By:
- Publication type:
- Article