Works matching DE "FOUNDRY sand"

Results: 507

Design and Development of Fly Ash-Modified Bentonite Clay in Green Sand Mold Casting Process for A356 Alloy Casting.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 7, p. 5556, doi. 10.1007/s11837-025-07384-1

By:

Patel, Dheerendra Singh;
Nayak, Ramesh Kumar

Publication type:

Article

Development of Calculation Program for Thermophysical Properties of Artificial Sand Mold.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1295, doi. 10.1007/s40962-024-01436-z

By:

Cho, I. S.;
Kwak, S. Y.;
Lee, B. J.;
Choi, Y. S.

Publication type:

Article

Thermal Analysis and Gas Generation Measurement of Foundry Sand Mixtures.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1732, doi. 10.1007/s40962-024-01417-2

By:

Sundaram, Dinesh;
Svidró, József Tamás;
Diószegi, Attila

Publication type:

Article

Influence of Casting Materials on the Microstructure and Mechanical Properties of Gray Cast Iron for Cylinder Liners.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1650, doi. 10.1007/s40962-024-01413-6

By:

Du, Shouquan;
Chen, Chaoyang;
Chen, Ruirun;
Wang, Qi;
Cui, Xiangyin;
Song, Qiang

Publication type:

Article

Effects of Manganese and Heat Treatment on Mechanical Properties in Spheroidal Graphite Cast Iron.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1243, doi. 10.1007/s40962-024-01389-3

By:

Nobuki, Tohru;
Aoki, Takanori;
Hatate, Minoru

Publication type:

Article

Hydraulic Conductivity of Compacted Granite Residual Soil Mixed with Palm Oil Fuel Ash in Landfill Application.

Published in:

Geotechnical & Geological Engineering, 2017, v. 35, n. 5, p. 1967, doi. 10.1007/s10706-017-0220-1

By:

Nik Daud, Nik;
Muhammed, Abubakar;
Kundiri, Ali

Publication type:

Article

Desiccation-Induced Volumetric Shrinkage of Compacted Foundry Sand Treated with Cement Kiln Dust.

Published in:

Geotechnical & Geological Engineering, 2013, v. 31, n. 1, p. 163, doi. 10.1007/s10706-012-9577-3

By:

Moses, George;
Afolayan, Jacob

Publication type:

Article

Automation of processing results of foundry sand sieve analysis at JSC 'Research and Production Corporation UralVagonZavod'.

Published in:

Automation & Remote Control, 2017, v. 78, n. 5, p. 936, doi. 10.1134/S0005117917050149

By:

Kuznetsov, I.;
Medvedev, S.;
Khazan, G.

Publication type:

Article

冷冻砂型薄壁件夹取变形数值模拟研究.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 2, p. 31, doi. 10.3969/j.issn.1001-3881.2025.02.005

By:

李建辉;
杜雅格;
贺磊;
王培欣;
吴虎;
董本丰年

Publication type:

Article

Optimization of dry compressive strength of groundnut shell ash particles (GSAp) and ant hill bonded foundry sand using ann and genetic algorithm.

Published in:

Cogent Engineering, 2019, v. 6, n. 1, p. 1, doi. 10.1080/23311916.2019.1681055

By:

Nwobi-Okoye, Chidozie Chukwuemeka;
Okonji, Patrick Chukwuka;
Okiy, Stanley;
Peng, Tao

Publication type:

Article

Biomonitoring with the Use of the Herbal Plant Taraxacum officinale as a Source of Information on Environmental Contamination.

Published in:

Plants (2223-7747), 2024, v. 13, n. 13, p. 1805, doi. 10.3390/plants13131805

By:

Respondek, Zuzanna;
Isinkaralar, Oznur;
Świsłowski, Paweł;
Isinkaralar, Kaan;
Rajfur, Małgorzata

Publication type:

Article

Penetrated surface characteristics of cement - mixed sand in powder bed 3D printing.

Published in:

Journal of Asian Ceramic Societies, 2022, v. 10, n. 2, p. 306, doi. 10.1080/21870764.2021.2024734

By:

Chun, S.-Y.;
Kim, T.;
Ye, B.;
Lee, M.-J.;
Lee, G.;
Jeong, B.;
Lee, H.;
Kim, H.-D.

Publication type:

Article

The Effect of the Addition of Bentonite Clay to Traditional Sand Mixtures on the Surface Quality of Iron Castings.

Published in:

Journal of Ecological Engineering, 2020, v. 21, n. 1, p. 160, doi. 10.12911/22998993/112505

By:

Kamińska, Jadwiga;
Puzio, Sabina;
Angrecki, Michał;
Stachowicz, Mateusz

Publication type:

Article

Preliminary Tests of Innovative Eco-Friendly Furfuryl Resins and Foundry Sand Mixtures Based on These Resins.

Published in:

Journal of Ecological Engineering, 2019, v. 20, n. 9, p. 285, doi. 10.12911/22998993/112510

By:

Kamińska, Jadwiga;
Puzio, Sabina;
Angrecki, Michał;
Stachowicz, Mateusz;
Łoś, Anna

Publication type:

Article

Event Review: Bronze Casting in Daugailiai, Lithuania.

Published in:

EXARC Journal, 2024, n. 4, p. 1

By:

Fregni, E. Giovanna

Publication type:

Article

A sustainable approach to optimum utilization of used foundry sand in concrete.

Published in:

Science & Engineering of Composite Materials, 2018, v. 25, n. 5, p. 927, doi. 10.1515/secm-2017-0012

By:

Rashid, Khuram;
Nazir, Sana

Publication type:

Article

Assessment of Leaching of Heavy Metals from Landfilled Foundry Waste During Exploitation of the Heaps.

Published in:

Polish Journal of Environmental Studies, 2019, v. 28, n. 6, p. 4117, doi. 10.15244/pjoes/99240

By:

Bożym, Marta

Publication type:

Article

APPLICATION OF INSTANCE-BASED LEARNING FOR CAST IRON CASTING DEFECTS PREDICTION.

Published in:

Management & Production Engineering Review (MPER), 2019, v. 10, n. 4, p. 101, doi. 10.24425/mper.2019.131450

By:

Sika, Robert;
Szajewski, Damian;
Hajkowski, Jakub;
Popielarski, Paweł

Publication type:

Article

PERFORMANCE EVALUATION OF DIFFERENT MATERIALS AS CHILLS IN SAND CASTING OF ALUMINUM ALLOY.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2019, v. 12, n. 3, p. 81

By:

ISAMOTU, Olakunle F.;
RAJI, Kabiru M.

Publication type:

Article

SYNERGISTIC EFFECTS OF STARCH AND RUBBER-LATEX AS CORE BINDERS FOR FOUNDRY SAND CORES PRODUCTION.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2012, v. 5, n. 4, p. 103

By:

Oyetunji, A.;
Seidu, S. O.

Publication type:

Article

RE-UTILIZATION OF MOLDING SANDS PREPARED WITH SYNTHETIC RESINS BY CLAY ADDITIONS, WITHOUT COMPLEX RECLAIM OPERATIONS.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2012, v. 5, n. 4, p. 81

By:

Kiss, Imre

Publication type:

Article

SOLUTIONIZATION OF ALUMINIUM 6063 MATRIX WITH 5% HDPE FOR IMPROVED HARDNESS AND TENSILE PROPERTIES.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2022, n. 4, p. 47

By:

OMOLE, Sylvester Olanrewaju;
OLUYORI, Raymond Taiwo;
AKINFOLARIN, John Femi

Publication type:

Article

CHILLING TENDENCY OF IRON POWDER TREATED GREY CAST IRON.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2021, n. 1, p. 183

By:

SEIDU, Saliu Ojo;
SAKA, Sheriff Olalekan;
KUTELU, Bolarinwa Johnson;
OWOKUNLE, Hakeem

Publication type:

Article

CHILLING TENDENCY OF IRON POWDER TREATED GREY CAST IRON.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2020, n. 4, p. 13

By:

SEIDU, Saliu Ojo;
SAKA, Sheriff Olalekan;
KUTELU, Bolarinwa Johnson;
OWOKUNLE, Hakeem

Publication type:

Article

ANALYSIS OF THE RATIONAL ROUTE OF ALUMINIUM ALLOY CASTINGS MECHANICAL TREATMENT ON BASIS OF RELIABILITY CRITERION.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2020, n. 1, p. 101

By:

KUSYI, Jaroslav M.;
KUK, Andrij M.

Publication type:

Article

CHILLING EFFECT OF IRON POWDER ON THE MICROSTRUCTURE AND HARDNESS PROPERTY OF STRONGLY HYPEREUTECTIC GREY CAST IRON.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2019, v. 17, n. 4, p. 13

By:

SAKA, Sherrif O.;
SEIDU, Saliu Ojo;
TAIWO, S. A.;
RIPOSAN, Iulian

Publication type:

Article

INVESTIGATION INTO FOUNDRY PROPERTIES OF OSHOGBO AND SAKI SILICA SAND DEPOSITES.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2013, v. 11, n. 3, p. 213

By:

AYOOLA, W. A.;
ADEOSUN, S. O.;
OYETUNJI, A.

Publication type:

Article

STUDY ON THE SHEAR STRENGTH OF FOUNDRY SAND CORES USING CLAY AND CASSAVA STARCH AS BINDER.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2013, v. 11, n. 3, p. 155

By:

OYETUNJI, A.;
SEIDU, S. O.;
OPALUWA, A. I.

Publication type:

Article

RESEARCH REGARDING THE RE-UTILIZATION OF MOLDING SANDS PREPARED WITH SYNTHETIC RESINS WITHOUT ANY COMPLEX RECLAIM OPERATIONS.

Published in:

Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2012, v. 10, n. 2, p. 227

By:

KISS, Imre

Publication type:

Article

EFFECT OF REGULAR THICKNESSES ON THE MICROSTRUCTURAL AND QUANTITATIVE ANALYSIS FOR A HYPO-EUTECTIC DUCTILE IRON ALLOYED WITH Ni AND V.

Published in:

Journal of Mining & Metallurgy. Section B: Metallurgy, 2024, v. 60, n. 1, p. 15, doi. 10.2298/JMMB231114002C

By:

Colin-García, E.;
Sánchez-Alvarado, R. G.;
Cruz-Ramírez, A.;
Suarez-Rosales, M. A.;
Portuguez-Pardo, L.;
Jiménez-Lugos, J. C.

Publication type:

Article

CHILL SENSITIVENESS AND THERMAL ANALYSIS PARAMETERS RELATIONSHIP IN HYPO-EUTECTIC, Ca AND Ca-La INOCULATED COMMERCIAL GREY CAST IRONS.

Published in:

Journal of Mining & Metallurgy. Section B: Metallurgy, 2020, v. 56, n. 3, p. 389, doi. 10.2298/JMMB200108020S

By:

Stefan, E.;
Chisamera, M.;
Riposan, I.

Publication type:

Article

The Ethical Imperative of Competence ― Vulcan’s Crucible.

Published in:

Journal of Values Based Leadership, 2022, v. 15, n. 2, p. 55, doi. 10.22543/1948-0733.1412

By:

Schroeder, Dean M.

Publication type:

Article

Research Thermal Fields in the Crystallization Process of Steel Cast Parts.

Published in:

Advances in Materials Science & Engineering, 2022, p. 1, doi. 10.1155/2022/7331866

By:

Liutyi, Rostyslav;
Petryk, Ivan;
Mogylatenko, Volodymyr;
Popovych, Vasyl;
Shatska, Halyna

Publication type:

Article

Microstructural characterisation related to hot tearing of Al-Cu sand mould castings.

Published in:

Fracture & Structural Integrity, 2010, v. 4, p. 64, doi. 10.3221/IGF-ESIS.14.07

By:

Merlin, Mattia

Publication type:

Article

ZIRCONIUM.

Published in:

Mining Engineering, 2023, v. 75, n. 7, p. 85

By:

Gambogi, Joseph

Publication type:

Article

HYDRAULIC FRACTURING SAND.

Published in:

Mining Engineering, 2018, v. 70, n. 7, p. 58

By:

Zdunczyk, Mark J.

Publication type:

Article

Digital twin of functional gating system in 3D printed molds for sand casting using a neural network.

Published in:

Journal of Intelligent Manufacturing, 2022, v. 33, n. 3, p. 897, doi. 10.1007/s10845-020-01699-3

By:

Ktari, Ahmed;
El Mansori, Mohamed

Publication type:

Article

A review of the influence of sand properties on parts manufactured by rapid sand casting through additive manufacturing.

Published in:

2025

By:

Oguntuyi, Samson Dare;
Nyembwe, Kasongo;
Shongwe, Mxolisi Brendon;
Kabasele, Jonathan;
Mojisola, Tajudeen

Publication type:

Literature Review

Recycled sand for sustainable 3D-printed sand mold processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 9/10, p. 4049, doi. 10.1007/s00170-023-12214-2

By:

Li, Yen-Ting;
Cheng, Yih-Lin;
Tang, Kea-Tiong

Publication type:

Article

Challenges and recent progress on the application of rapid sand casting for part production: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 891, doi. 10.1007/s00170-023-11049-1

By:

Oguntuyi, Samson Dare;
Nyembwe, Kasongo;
Shongwe, Mxolisi Brendon;
Mojisola, Tajudeen

Publication type:

Article

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 569, doi. 10.1007/s00170-023-11112-x

By:

Martinez, Daniel;
King, Philip;
Sama, Santosh Reddy;
Sim, Jay;
Toykoc, Hakan;
Manogharan, Guha

Publication type:

Article

A comprehensive efficiency evaluation of conventional and ablation sand casting on the example of the AlSi7Mg alloy impeller.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 3653, doi. 10.1007/s00170-022-09538-w

By:

Hafeez, Faisal;
Ahmed, Naveed;
Ali, Muhammad Asad;
Farooq, Muhammad Umar;
AlFaify, Abdullah Yahia;
Rehman, Ateekh Ur

Publication type:

Article

Investigation of the effect of three-point bending testing parameters on the behavior of 3D printed sand.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 1415, doi. 10.1007/s00170-022-09418-3

By:

Ahmed, Walid Fekih;
Sghaier, Mohamed Ben Hadj;
Allaoui, Samir

Publication type:

Article

On the manufacture of naval propellers by using self-hardening sand molds made by robotic arms.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1751, doi. 10.1007/s00170-021-07492-7

By:

Cruz, Celso E.;
Vargas-Arista, B.;
Gámez-Cuatzin, Hugo;
Camacho, Diego;
Canto, Alfredo;
Villareal-Colin, Ricardo;
Castillo-Garcia, Andres;
Valdez-Aguayo, Antonio;
Rice-Ramirez, José Luis;
Guzmán, Isidro

Publication type:

Article

EFFECT OF LEACHING BEHAVIOR ON GRANULAR BASE LAYER STABILIZED WITH RECYCLED MATERIALS.

Published in:

Journal of Engineering & Sustainable Development, 2018, v. 22, n. 2, Part 6, p. 183, doi. 10.31272/jeasd.2018.2.93

By:

Zainab Ahmed Abdalsattar;
Ali Jabbar Kadhim;
Eman Abd Alhassan Mohammed

Publication type:

Article

Compressive Strength and Abrasion Resistance of Concrete Containing Used-Foundry Sand.

Published in:

Journal of Solid Waste Technology & Management, 2016, v. 42, n. 1, p. 27

By:

Singh, Gurpreet;
Siddique, Rafat

Publication type:

Article

Recycling of Bag-House Dust from Foundry Sand.

Published in:

Journal of Solid Waste Technology & Management, 2014, v. 40, n. 3, p. 203, doi. 10.5276/JSWTM.2014.203

By:

Dugan, B.;
Anderson, C.

Publication type:

Article

CASTING QUALITY ENHANCEMENT USING NEW BINDERS ON SAND CASTING AND HIGH-PRESSURE RHEO-DIE CASTING.

Published in:

Progress in Physics of Metals / Uspehi Fiziki Metallov, 2019, v. 20, n. 3, p. 396, doi. 10.15407/ufm.20.03.396

By:

PUSPITASARI, P.;
DIKA, J. W.

Publication type:

Article

Sustainability Analysis of Landfill Cover System Constructed Using Recycled Waste Materials by Life Cycle Assessment.

Published in:

Nature Environment & Pollution Technology, 2024, v. 23, n. 1, p. 409, doi. 10.4688/NEPT.2024.v23i01.035

By:

Sanoop, G.;
Cyrus, Sobha;
Madhu, G.

Publication type:

Article

In situ monitoring of used-sand regeneration in foundries by impedance spectroscopy.

Published in:

Journal of Sensors & Sensor Systems, 2022, v. 11, n. 2, p. 287, doi. 10.5194/jsss-11-287-2022

By:

Bifano, Luca;
Weider, Marco;
Fischerauer, Alice;
Wolf, Gotthard;
Fischerauer, Gerhard

Publication type:

Article