Works matching DE "GLULAM (Wood)"
Results: 179
Effect of concentrated Butt-Joints on flexural properties of laminated Bamboo-Timber flitch beams.
- Published in:
- Journal of Sandwich Structures & Materials, 2022, v. 24, n. 2, p. 1226, doi. 10.1177/10996362211040103
- By:
- Publication type:
- Article
Potential of Reinforced Indonesian Glulam Beams Using Grade I (Bengkirai), Grade II (Kamper), Grade III (Nyatoh) Woods for Use in Structural Wood Design.
- Published in:
- Journal of Engineering & Technological Sciences, 2016, v. 48, n. 2, p. 1, doi. 10.5614/j.eng.technol.sci.2016.48.2.2
- By:
- Publication type:
- Article
Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement.
- Published in:
- Journal of Engineering & Technological Sciences, 2015, v. 47, n. 6, p. 601, doi. 10.5614/j.eng.technol.sci.2015.47.6.1
- By:
- Publication type:
- Article
Introduction to special issue—advances in mass timber structures.
- Published in:
- Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. I, doi. 10.1139/cjce-2024-0155
- By:
- Publication type:
- Article
Experimental, finite element and analytical characterization of hysteretic response of ductile connections with nailed angle brackets for mass timber structures.
- Published in:
- Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. 803, doi. 10.1139/cjce-2023-0394
- By:
- Publication type:
- Article
Behaviour of glued-laminated timber beams under impact loading.
- Published in:
- Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. 753, doi. 10.1139/cjce-2023-0298
- By:
- Publication type:
- Article
Elastic response of cross-laminated timber panels using finite element and analytical techniques.
- Published in:
- Canadian Journal of Civil Engineering, 2021, v. 48, n. 10, p. 1245, doi. 10.1139/cjce-2020-0205
- By:
- Publication type:
- Article
Critical reaction forces of glulam members with tension-side notches at end supports<sup>1</sup>.
- Published in:
- Canadian Journal of Civil Engineering, 2015, v. 42, n. 10, p. 779, doi. 10.1139/cjce-2014-0466
- By:
- Publication type:
- Article
Explanation of tension-side notch design provisions for glulam in CSA Standard 086-14<sup>1</sup>.
- Published in:
- Canadian Journal of Civil Engineering, 2015, v. 42, n. 10, p. 787, doi. 10.1139/cjce-2015-0088
- By:
- Publication type:
- Article
A NOVEL METHOD FOR PRODUCING A GLULAM FROM THE WOOD OF PEELER CORES.
- Published in:
- Maderas: Ciencia y Tecnología, 2022, v. 24, n. 1, p. 1, doi. 10.4067/s0718-221x2022000100404
- By:
- Publication type:
- Article
Effects of the presence or absence and the position of glued edge joints in the lamina on the shear strength of glued laminated timber.
- Published in:
- Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02062-1
- By:
- Publication type:
- Article
Study on the strength of glued laminated timber beams with round holes: proposal of the design formula for the splitting strength.
- Published in:
- Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02013-w
- By:
- Publication type:
- Article
Transformed-section method applied to multispecies glulam timber beams subjected to pure bending.
- Published in:
- Mechanics of Advanced Materials & Structures, 2022, v. 29, n. 27, p. 6814, doi. 10.1080/15376494.2021.1985665
- By:
- Publication type:
- Article
Verification of the photogrammetric approach on the torsion test method for timber beams.
- Published in:
- International Wood Products Journal, 2022, v. 13, n. 1, p. 3, doi. 10.1080/20426445.2021.1983690
- By:
- Publication type:
- Article
In this issue.
- Published in:
- 2021
- By:
- Publication type:
- Editorial
Bending test on large-scale GLT beams with well-known beam setup using machine grading indicator.
- Published in:
- International Wood Products Journal, 2021, v. 12, n. 4, p. 258, doi. 10.1080/20426445.2021.1969166
- By:
- Publication type:
- Article
Applicability of the torsion test and photogrammetric approach on structural timber beams.
- Published in:
- International Wood Products Journal, 2021, v. 12, n. 3, p. 206, doi. 10.1080/20426445.2021.1952047
- By:
- Publication type:
- Article
Perpendicular to grain stress concentrations in glulam beams of irregular shape - finite element modelling in the context of standard design.
- Published in:
- International Wood Products Journal, 2018, v. 9, n. 4, p. 157, doi. 10.1080/20426445.2018.1540377
- By:
- Publication type:
- Article
The environmental impact of wood compared to other building materials.
- Published in:
- International Wood Products Journal, 2016, v. 7, n. 4, p. 215, doi. 10.1080/20426445.2016.1190166
- By:
- Publication type:
- Article
PERFORMANCE OF GLUED LAMINATED TIMBER (GLULAM) MADE FROM KELEMPAYAN WOOD WITH DIFFERENT LAMINA ASSEMBLY PATTERNS AND ADHESIVE SPREAD RATES.
- Published in:
- Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineering, 2023, v. 16, n. 1, p. 51, doi. 10.31926/but.fwiafe.2023.16.65.1.4
- By:
- Publication type:
- Article
Polystyrene-Impregnated Glulam Resistance to Subterranean Termite Attacks in a Laboratory Test.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 19, p. 4003, doi. 10.3390/polym14194003
- By:
- Publication type:
- Article
Compressive Strength Properties Perpendicular to the Grain of Hollow Glue-Laminated Timber Elements.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 16, p. 3403, doi. 10.3390/polym14163403
- By:
- Publication type:
- Article
Mechanical and Fire Performance of Innovative Hollow Glue-Laminated Timber Beams.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 16, p. 3381, doi. 10.3390/polym14163381
- By:
- Publication type:
- Article
Numerical study of racking resistance of timber-made double-skin façade elements.
- Published in:
- Advances in Production Engineering & Management, 2022, v. 17, n. 2, p. 231, doi. 10.14743/apem2022.2.433
- By:
- Publication type:
- Article
Analytical Method with Iteration Technique (AMIT) and Finite Element Method (FEM) for Predicting the Flexural Performance of Glulam Wood/PVC Composite Hollow Member.
- Published in:
- BioResources, 2024, v. 19, n. 3, p. 5197, doi. 10.15376/biores.19.3.5197-5226
- By:
- Publication type:
- Article
Simulation Calculation and Analysis of Building Energy Consumption of Multi-Story Glued Laminated Timber Structures.
- Published in:
- BioResources, 2023, v. 18, n. 4, p. 7391, doi. 10.15376/biores.18.4.7391-7410
- By:
- Publication type:
- Article
Shear Stiffness of Notched Connectors in Glue Laminated Timber-Concrete Composite Beams Under Fire Conditions.
- Published in:
- BioResources, 2022, v. 17, n. 4, p. 6397, doi. 10.15376/biores.17.4.6397-6410
- By:
- Publication type:
- Article
Determination of Charring Thickness of Wood by Residual Strength Analysis.
- Published in:
- BioResources, 2022, v. 17, n. 1, p. 1485, doi. 10.15376/biores.17.1.1485-1493
- By:
- Publication type:
- Article
Influence of Adhesive and Layer Composition on Compressive Strength of Mixed Cross-laminated Timber.
- Published in:
- BioResources, 2021, v. 16, n. 4, p. 7461, doi. 10.15376/biores.16.4.7461-7473
- By:
- Publication type:
- Article
Examination of Wood Adhesive Bonds via MicroCT: The Influence of Pre-Gluing Surface Machining Treatments for Southern Pine, Spotted Gum, and Darwin Stringybark Timbers.
- Published in:
- BioResources, 2021, v. 16, n. 3, p. 5058
- By:
- Publication type:
- Article
Experimental Investigation into the Flexural Behavior of Hollow, Full, and Intermittently Stiffened (bamboo-like) Glulam Beams from Larch Wood.
- Published in:
- BioResources, 2019, v. 14, n. 1, p. 2171, doi. 10.15376/biores.14.1.2171-2185
- By:
- Publication type:
- Article
Experimental and Numerical Study of Moisture-induced Stress Formation in Hexagonal Glulam Using X-ray Computed Tomography and Finite-element Analysis.
- Published in:
- BioResources, 2018, v. 13, n. 4, p. 7395, doi. 10.15376/biores.13.4.7395-7403
- By:
- Publication type:
- Article
Evaluation of the Bending Properties of Modified Fastgrowing Poplar Glulam Based on Composite Mechanics.
- Published in:
- BioResources, 2018, v. 13, n. 3, p. 7071, doi. 10.15376/biores.13.3.7071-7085
- By:
- Publication type:
- Article
Shear Capacity of Stud-Groove Connector in Glulam-concrete Composite Structure.
- Published in:
- BioResources, 2017, v. 12, n. 3, p. 4690, doi. 10.15376/biores.12.3.4690-4706
- By:
- Publication type:
- Article
Assessing the Environmental Impacts of Glued- Laminated Bamboo Based on a Life Cycle Assessment.
- Published in:
- BioResources, 2016, v. 11, n. 1, p. 1941, doi. 10.15376/biores.11.1.1941-1950
- By:
- Publication type:
- Article
Synthesis and Characterization of Starch-based Aqueous Polymer Isocyanate Wood Adhesive.
- Published in:
- BioResources, 2015, v. 10, n. 4, p. 7653, doi. 10.15376/biores.10.4.7653-7666
- By:
- Publication type:
- Article
Determination of Optimal Machining Parameters of Massive Wooden Edge-Glued Panels Made of European larch (Larix decidua Mill.) using Taguchi Design Method.
- Published in:
- BioResources, 2015, v. 10, n. 4, p. 7772, doi. 10.15376/biores.10.4.7772-7781
- By:
- Publication type:
- Article
Glulam Properties of Fast-growing Species Using Mahogany Tannin Adhesive.
- Published in:
- BioResources, 2015, v. 10, n. 4, p. 7419, doi. 10.15376/biores.10.4.7419-7433
- By:
- Publication type:
- Article
The effect of depth and diameter of glued-in rods on pull-out connection strength of bamboo glulam.
- Published in:
- Journal of Wood Science, 2016, v. 62, n. 1, p. 109, doi. 10.1007/s10086-015-1516-5
- By:
- Publication type:
- Article
Recent research and development on sugi (Japanese cedar) structural glued laminated timber.
- Published in:
- Journal of Wood Science, 2015, v. 61, n. 4, p. 337, doi. 10.1007/s10086-015-1475-x
- By:
- Publication type:
- Article
Investigation of the structural performance of glulam beam connections using self-tapping screws.
- Published in:
- Journal of Wood Science, 2014, v. 60, n. 1, p. 39, doi. 10.1007/s10086-013-1376-9
- By:
- Publication type:
- Article
Experimental and numerical investigation of timber formwork beam under different loading type.
- Published in:
- Mechanics Based Design of Structures & Machines, 2022, v. 50, n. 3, p. 1090, doi. 10.1080/15397734.2020.1749071
- By:
- Publication type:
- Article
增强木梁受弯性能数值计算.
- Published in:
- China Forest Products Industry, 2023, v. 60, n. 5, p. 51, doi. 10.19531/j.issn1001-5299.202305009
- By:
- Publication type:
- Article
Investigation of the Effect of the Force Arm on the Bending Capability of Prestressed Glulam Beam.
- Published in:
- Structural Durability & Health Monitoring (SDHM), 2024, v. 18, n. 5, p. 641, doi. 10.32604/sdhm.2024.049601
- By:
- Publication type:
- Article
Charring Properties of Korean Larch Structural Glue-Laminated Timber Beams Based on Cross-Sectional Area Ratios.
- Published in:
- Buildings (2075-5309), 2025, v. 15, n. 3, p. 305, doi. 10.3390/buildings15030305
- By:
- Publication type:
- Article
Multi-Criteria Assessment of Timber-Based Structural Systems for a Grocery Store.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 5, p. 1335, doi. 10.3390/buildings14051335
- By:
- Publication type:
- Article
Design Analysis of Mass Timber and Volumetric Modular Strategies as Counterproposals for an Existing Reinforced Concrete Hotel.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 4, p. 1151, doi. 10.3390/buildings14041151
- By:
- Publication type:
- Article
Digital Twin Research on Masonry–Timber Architectural Heritage Pathology Cracks Using 3D Laser Scanning and Deep Learning Model.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 4, p. 1129, doi. 10.3390/buildings14041129
- By:
- Publication type:
- Article
Experimental Study to Determine the Development of Axial Stiffness of Wood Screws with Increasing Load Cycles.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 4, p. 1109, doi. 10.3390/buildings14041109
- By:
- Publication type:
- Article
Bending Behaviour and Failure Modes of Non-Glue-Laminated Timber Beams Composed of Wooden Dowels and Self-Tapping Screws.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 2, p. 394, doi. 10.3390/buildings14020394
- By:
- Publication type:
- Article