Works matching DE "WIREDRAWING"

Results: 197

高速线材吐丝头结构仿真与优化设计研究.

Published in:

Machine Tool & Hydraulics, 2024, v. 52, n. 19, p. 117, doi. 10.3969/j.issn.1001-3881.2024.19.019

By:

罗良传;
成西平;
陈敏;
李云升;
毛璐瑶

Publication type:

Article

Effect of Exogenous Melatonin on the Quality of Soybean and Natto Products under Drought Stress.

Published in:

Journal of Chemistry, 2021, p. 1, doi. 10.1155/2021/8847698

By:

Cao, Liang;
Kou, Fang;
Zhang, Mingcong;
Jin, Xijun;
Ren, Chunyuan;
Yu, Gaobo;
Zhang, Yuxian;
Wang, Mengxue

Publication type:

Article

Drawing Wire.

Published in:

EXARC Journal, 2023, n. 3, p. 1

By:

Lyngstrøm, Henriette

Publication type:

Article

Toughening Modification of Polylactic Acid by Long-Chain Hyperbranched Polymers Containing Polycaprolactone end Groups.

Published in:

Journal of Polymers & the Environment, 2022, v. 30, n. 12, p. 5327, doi. 10.1007/s10924-022-02589-w

By:

Tie, Rui;
Huang, Yansong;
Jin, Yujuan;
Sun, Jianjian;
Tian, Huafeng;
Lei, Xiao;
Li, Gongcheng;
Wang, Lu;
Men, Shuang

Publication type:

Article

Investigations of Formability and Dynamic Recrystallization Development of Titanium Alloys During Dieless Wire Drawing Processes.

Published in:

Steel Research International, 2023, v. 94, n. 2, p. 1, doi. 10.1002/srin.202200113

By:

Hwang, Yeong-Maw;
Liu, Han-Hsuan;
Wang, Yu-Ting

Publication type:

Article

Characterisation of zinc phosphate coating deposited on carbon steel wire rod using an accelerator-side and iron-side phosphating solution.

Published in:

Transactions of the Institute of Metal Finishing, 2025, v. 103, n. 1, p. 42, doi. 10.1080/00202967.2024.2407716

By:

Kor, Swapnil;
Bhave, Kedar;
Solanki, Vikas;
Gudadhe, Dinesh;
Desai, Shishir

Publication type:

Article

Extending the Useful Life of Metalworking Fluids in a Copper Wire Drawing Industry by Monitoring Their Functional Properties.

Published in:

Tribology & Lubrication Technology, 2013, v. 69, n. 3, p. 40

By:

MATOS, MARÍA;
LOBO, ALBERTO;
BENITO, JOSÉ M.;
COCA, JOSÉ;
PAZOS, CARMEN

Publication type:

Article

Influence of the drawing process on corrosion behaviour of hot-dip galvanised wires.

Published in:

Materials Science & Technology, 2023, v. 39, n. 2, p. 158, doi. 10.1080/02670836.2022.2105498

By:

Suliga, Maciej;
Wartacz, Radosław;
Hawryluk, Marek

Publication type:

Article

Medium carbon fully pearlitic steel: microstructures and properties after wire drawing.

Published in:

Materials Science & Technology, 2019, v. 35, n. 5, p. 585, doi. 10.1080/02670836.2019.1573526

By:

Das, Sourav;
Bradley, Paul;
Haldar, Arunansu

Publication type:

Article

Predictive maintenance for wire drawing machine using MiniRocket and GA-based ensemble method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1661, doi. 10.1007/s00170-024-14225-z

By:

Kuo, Ren-Jieh;
Xu, Zhen-Xuan

Publication type:

Article

Influence of wet wire drawing speed on the brass-plated steel cord properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1219, doi. 10.1007/s00170-024-14068-8

By:

Suliga, Maciej;
Kabzinski, Adam;
Kotecki, Kamil;
Kloziński, Arkadiusz;
Hawryluk, Marek

Publication type:

Article

Numerical analysis of the effects of incremental reduction rate in the wire drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5197, doi. 10.1007/s00170-024-13982-1

By:

Badi, Ridha;
Bensaada, Said;
Tala-Ighil, Nacer;
Lebaal, Nadhir

Publication type:

Article

Correction to: Application of ML methods to predict residual stresses and strains after wire drawing process.

Published in:

2024

By:

Demin, Dmitriy;
Grebenkin, Ilya

Publication type:

Correction Notice

Application of ML methods to predict residual stresses and strains after wire drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3461, doi. 10.1007/s00170-024-13949-2

By:

Demin, Dmitriy;
Grebenkin, Ilya

Publication type:

Article

Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 2, p. 637, doi. 10.1007/s00170-023-11315-2

By:

Dashti, Alireza;
Keller, Clément;
Vieille, Benoit;
Guillet, Alain;
Gallo, Calogero;
Habraken, Anne-Marie;
Duchêne, Laurent

Publication type:

Article

Investigation modes for production technology of wire from the Pd5Ni alloy for catchment gauzes of the chemical industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 11/12, p. 7229, doi. 10.1007/s00170-022-09821-w

By:

Konstantinov, Igor L.;
Sidelnikov, Sergey B.;
Lopatina, Ekaterina S.;
Arnautov, Aleksandr D.;
Rudnitskiy, Edvard A.;
Voroshilov, Denis S.;
Mansurov, Yulbarskhon N.;
Lopatin, Vladimir A.;
Yuryev, Pavel O.;
Dobrovenko, Mikhail P.;
Ber, Vladimir I.

Publication type:

Article

High speed multi-stage drawing process of hot-dip galvanised steel wires.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7639, doi. 10.1007/s00170-022-09277-y

By:

Suliga, Maciej;
Wartacz, Radosław;
Michalczyk, Jacek

Publication type:

Article

Application of a novel linkage design for the concentration sensing system.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1613, doi. 10.1007/s00170-021-08285-8

By:

Lin, Ming-Chang;
Sun, Wen-Yeh

Publication type:

Article

The influences of the variable speed and internal die geometry on the performance of two commercial soluble oils in the drawing process of pure copper fine wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 11/12, p. 3749, doi. 10.1007/s00170-021-08172-2

By:

Martínez, Gustavo Aristides Santana;
Rodriguez-Alabanda, Oscar;
Prisco, Umberto;
Tintelecan, Marius;
Kabayama, Leonardo Kyo

Publication type:

Article

Novel drawing system approach to manufacture performant commercially pure aluminium fine wires.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1101, doi. 10.1007/s00170-021-08005-2

By:

Caruso, Serafino;
Ambrogio, Giuseppina

Publication type:

Article

Evaluating the maximum draft and safety factor in wire-drawing.

Published in:

Metallurgist, 2008, v. 52, n. 9/10, p. 582, doi. 10.1007/s11015-009-9096-5

By:

Gur'yanov, G. N.

Publication type:

Article

Effect of the deformation parameters on the forces in the tool during wire-drawing.

Published in:

Metallurgist, 2008, v. 52, n. 3/4, p. 197, doi. 10.1007/s11015-008-9031-1

By:

Gu'yanov, G. N.

Publication type:

Article

A mathematical model for the prediction of mechanical properties on ASTM A510/A853 cold-drawn hypoeutectoid steel wire after batch annealing.

Published in:

Mathematics & Mechanics of Solids, 2024, v. 29, n. 5, p. 833, doi. 10.1177/10812865231211284

By:

Sánchez de León, José Alfredo

Publication type:

Article

Methodology for Constructing Fuzzy Individual and Moving Range Control Chart.

Published in:

Association of Arab Universities Journal of Engineering Sciences (JAARU), 2024, v. 31, n. 2, p. 24, doi. 10.33261/jaaru.2024.31.2.003

By:

Jabbar, Reyam Raheem;
Ahmed Alkhafaji, Ahmed Abdulrasool

Publication type:

Article

ELECTRICAL WIRE PRODUCTION FROM Al - Ce - La ALLOY RODS AFTER ELECTROMAGNETIC MOLD AND COMBINED ROLLING - EXTRUSION.

Published in:

Journal of Chemical Technology & Metallurgy, 2025, v. 60, n. 2, p. 327, doi. 10.59957/jctm.v60.i2.2025.15

By:

Voroshilov, Denis;
Sidelnikov, Sergey;
Darmazhapov, Dorzhizhab;
Pokshivanov, Stepan;
Bespalov, Vadim;
Durnopyanov, Alexander;
Berngardt, Viktor;
Lezhnev, Sergey;
Motkov, Mikhail;
Voroshilova, Marina;
Novikova, Olga;
Klimov, Danil;
Ashmarin, Andrey;
Panin, Evgeniy

Publication type:

Article

INFLUENCE OF CRYOGENIC COOLING AFTER DRAWING ON CHANGES IN PROPERTIES OF STEEL WIRE.

Published in:

Journal of Chemical Technology & Metallurgy, 2024, v. 59, n. 5, p. 1227, doi. 10.59957/jctm.v59.i5.2024.26

By:

Volokitina, Irina;
Volokitin, Andrey;
Denissova, Anastasia;
Fedorova, Tatiana;
Lawrinuk, Dmitriy

Publication type:

Article

CHANGES IN THE PROPERTIES OF Fe37-3FN STEEL DURING ECAP-DRAWING.

Published in:

Journal of Chemical Technology & Metallurgy, 2023, v. 58, n. 4, p. 806, doi. 10.59957/jctm.v58i4.115

By:

Volokitin, Andrey;
Naizabekov, Abdrakhman

Publication type:

Article

OPTIMIZATION OF A COLD WIRE DRAWING TECHNOLOGICAL PROCESS.

Published in:

Journal of Chemical Technology & Metallurgy, 2015, v. 50, n. 5, p. 653

By:

Jokovic, Živko;
Djapic, Nina

Publication type:

Article

A HYDRODYNAMIC MODEL FOR WIRE DRAWING.

Published in:

International Journal of Production Research, 1968, v. 6, n. 4, p. 329

By:

Bedi, D. S.

Publication type:

Article

Cover Image, Volume 138, Issue 3.

Published in:

Journal of Applied Polymer Science, 2021, v. 138, n. 3, p. 1, doi. 10.1002/app.50026

By:

Wang, Xueyu;
Qi, Yong;
Zhang, Shufen;
Niu, Wenbin;
Ma, Wei;
Wu, Suli;
Tang, Bingtao

Publication type:

Article

Carbon fibre‐graphene composite polylactic acid (PLA) material for COVID shield frame.

Published in:

Materialwissenschaft und Werkstoffechnik, 2022, v. 53, n. 1, p. 119, doi. 10.1002/mawe.202100154

By:

Mohammed Basheer, E.P.;
Marimuthu, K.

Publication type:

Article

Role of Cr-coating by electroplating method on fabrication and transport properties of Fe/Cr/MgB2 wires.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 9, p. 7141, doi. 10.1007/s10854-020-03285-y

By:

Karaboga, Firat

Publication type:

Article

Monitoring and evaluation of the wire drawing process using thermal imaging.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 101, n. 5-8, p. 2121, doi. 10.1007/s00170-018-3021-7

By:

Larsson, Joakim;
Jansson, Anton;
Karlsson, Patrik

Publication type:

Article

Research and application of weight function in flexible male die drawing deformation mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 89, n. 5-8, p. 1645, doi. 10.1007/s00170-016-9182-3

By:

Jia, Xiangdong;
Zhao, Changcai

Publication type:

Article

Modeling of grain refinement and mechanical response of microalloyed steel wires severely deformed by combined forming process.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 89, n. 5-8, p. 1559, doi. 10.1007/s00170-016-9203-2

By:

Majta, Janusz;
Perzyński, Konrad;
Muszka, Krzysztof;
Graca, Paulina;
Madej, Łukasz

Publication type:

Article

Characterization of local residual stress inhomogeneities in combined wire drawing processes of AISI 1045 steel bars.

Published in:

International Journal of Advanced Manufacturing Technology, 2014, v. 70, n. 1-4, p. 661, doi. 10.1007/s00170-013-5314-1

By:

Hirsch, Thomas;
Silva Rocha, Alexandre;
Menezes Nunes, Rafael

Publication type:

Article

A new model of the antifriction effect on wiredrawing with ultrasound.

Published in:

International Journal of Advanced Manufacturing Technology, 2012, v. 63, n. 9-12, p. 1047, doi. 10.1007/s00170-012-3976-8

By:

Shan, Xiaobiao;
Qi, Haiqun;
Wang, Lili;
Xie, Tao

Publication type:

Article

Frequency Dependence Measuring of Skin-Effect on Metal Wires with Circular Cross-Section.

Published in:

Technical Physics, 2024, v. 69, n. 5, p. 1336, doi. 10.1134/S1063784224040339

By:

Prasolov, N. D.;
Lihachev, A. I.;
Sokolov, R. V.;
Levin, A. A.;
Narykova, M. V.;
Kadomtsev, A. G.;
Brunkov, P. N.;
Sultanov, M. M.;
Strizhichenko, A. V.;
Boldyrev, I. A.

Publication type:

Article

High deformation and delamination mechanisms explained through mesoscale and nanoscale phenomena in pearlitic steel wires.

Published in:

Metallurgical Research & Technology, 2024, v. 121, n. 1, p. 1, doi. 10.1051/metal/2023089

By:

Brandaleze, Elena;
Romanyuk, Mykhaylo;
Barrirero, Jenifer;
Mücklich, Frank;
Schell, Norbert;
Brokmeier, Heinz-Günter;
Ávalos, Martina;
Bolmaro, Raúl

Publication type:

Article

Cause analysis of V-shaped crack pairs on drawn welding wire surface of ER70S-6 steel.

Published in:

Metallurgical Research & Technology, 2022, v. 119, n. 5, p. 1, doi. 10.1051/metal/2022070

By:

Zhao, Haitao;
Wang, Shuize;
Gao, Junheng;
Qi, Jianjun;
Su, Ru;
Zhang, Hongqi;
Chen, Hongwei;
Tian, Zhiqiang;
Bai, Lijuan

Publication type:

Article

Influence of steel cleanliness on drawability of fine filaments with high tensile strength.

Published in:

Metallurgical Research & Technology, 2019, v. 116, n. 5, p. 1, doi. 10.1051/metal/2019025

By:

Godon, Julie;
Antoine, Pascal;
Vogt, Jean Bernard;
Bouquerel, Jérémie;
Bellot, Jean-Pierre;
Gardin, Pascal;
Gruy, Frédéric

Publication type:

Article

BASIC MECHANICAL PROPERTIES INFLUENCED BY DRAWING TECHNOLOGY OF COPPER WIRES.

Published in:

University Review (1337-6047), 2019, v. 13, n. 3, p. 23

By:

Kuricová, Jana;
Kianicová, Marta;
Dubec, Andrej;
Kottfer, Daniel;
Kováčiková, Petra

Publication type:

Article

Damage Prediction in the Wire Drawing Process.

Published in:

Metals (2075-4701), 2024, v. 14, n. 10, p. 1174, doi. 10.3390/met14101174

By:

González, Álvaro;
Cruchaga, Marcela;
Celentano, Diego;
Ponthot, Jean-Philippe

Publication type:

Article

Reduction of Residual Stresses in Cold Drawn Pearlitic Steel by a Soft Secondary Wire Diameter Reduction.

Published in:

Metals (2075-4701), 2023, v. 13, n. 2, p. 433, doi. 10.3390/met13020433

By:

Toribio, Jesús;
Lorenzo, Miguel

Publication type:

Article

Mathematical Modeling of Heating and Strain Aging of Steel during High-Speed Wire Drawing.

Published in:

Metals (2075-4701), 2022, v. 12, n. 9, p. 1472, doi. 10.3390/met12091472

By:

Radionova, Liudmila V.;
Gromov, Dmitry V.;
Svistun, Alexandra S.;
Lisovskiy, Roman A.;
Faizov, Sergei R.;
Glebov, Lev A.;
Zaramenskikh, Sergei E.;
Bykov, Vitaly A.;
Erdakov, Ivan N.

Publication type:

Article

Characterization of AlSi10Mg-CP-Ti Metal/Metal Composite Materials Produced by Electro-Sinter-Forging.

Published in:

Metals (2075-4701), 2021, v. 11, n. 10, p. 1645, doi. 10.3390/met11101645

By:

Gobber, Federico Simone;
Fracchia, Elisa;
Fais, Alessandro;
Peter, Ildiko;
Grande, Marco Actis

Publication type:

Article

Recent Advances on Drawing Technology of Ultra-Fine Steel Tire Cord and Steel Saw Wire.

Published in:

Metals (2075-4701), 2021, v. 11, n. 10, p. 1590, doi. 10.3390/met11101590

By:

Chen, Changyong;
Sun, Meng;
Wang, Bao;
Zhou, Jianan;
Jiang, Zhouhua

Publication type:

Article

A New Added-Value Application for Steel Wire Drawing Mill Scale Waste in Stoneware Ceramic Products.

Published in:

Metals (2075-4701), 2021, v. 11, n. 4, p. 661, doi. 10.3390/met11040661

By:

Vilarinho, Inês Silveirinha;
Lopes, Ana Luisa;
Carneiro, Jorge;
Pinto, Carlos;
Labrincha, João António;
Seabra, Maria Paula

Publication type:

Article

Tube Drawing with Tilted Die: Texture, Dislocation Density and Mechanical Properties.

Published in:

Metals (2075-4701), 2021, v. 11, n. 4, p. 638, doi. 10.3390/met11040638

By:

Al-Hamdany, Nowfal;
Salih, Mohammed Zakria;
Palkowski, Heinz;
Carradò, Adele;
Gan, Weimin;
Schell, Norbert;
Brokmeier, Heinz-Günter

Publication type:

Article

Correlation between Microstructures and Ductility Parameters of Cold Drawn Hyper-Eutectoid Steel Wires with Different Drawing Strains and Post-Deformation Annealing Conditions.

Published in:

Metals (2075-4701), 2021, v. 11, n. 2, p. 178, doi. 10.3390/met11020178

By:

Jung, Jin Young;
An, Kang Suk;
Park, Pyeong Yeol;
Nam, Won Jong

Publication type:

Article